In the tcp_chr_write function, we checked errno,
but errno was not reset before a read or write operation.
Therefore, this check of errno's actions is often
incorrect after EAGAIN has occurred.
we need check errno together with ret < 0.
Signed-off-by: xinhua.Cao <caoxinhua@huawei.com>
Message-Id: <20180704033642.15996-1-caoxinhua@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes: 9fc53a10f8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a real serial device, the open can block if the handshake
lines are in a particular state. If a QEMU is passing the serial
device to the guest, the QEMU startup is blocked opening the device
(with a symptom seen as a timeout from libvirt).
Open the serial port with O_NONBLOCK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The stdio chardev finalize method calls term_exit() to restore the
original terminal settings that were saved in the "oldtty" global. If
the qemu_chr_open_stdio() method exited with an error, we might not have
any original terminal settings saved in "oldtty" yet.
eg
$ qemu-system-x86_64 -monitor stdio -daemonize
qemu-system-x86_64: -monitor stdio: cannot use stdio with -daemonize
will cause QEMU to splatter the terminal settings with an all-zeros
"struct termios", with predictably unpleasant results. Fortunately the
existing "stdio_in_use" flag is suitable witness for whether "oldtty"
contains settings that need restoring.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180604123043.13985-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we see EAGAIN, no data was sent over the socket, so we still have to
retry sending of msgfds next time.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'stair-step output' on stdio.
This partially reverts commit 12fb0ac05, which was correct
on the mailing list but got corrupted by the maintainer :p
Introduced-by: 3b876140-c035-dd39-75d0-d54c48128fac@redhat.com
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607210818.12727-1-f4bug@amsat.org
Suggested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes a bug in serial that made it almost impossible for guest
to communicate with devices through host's serial.
OPOST flag in c_oflag enables output processing letting other flags in
c_oflag take effect. Usually in c_oflag ONLCR flag is also set, which
causes crlf to be sent in place of lf. This breaks binary transmissions.
Unsetting OPOST flag turns off any output processing which fixes the bug.
Bug reports related:
https://bugs.launchpad.net/qemu/+bug/1772086https://bugs.launchpad.net/qemu/+bug/1407813https://bugs.launchpad.net/qemu/+bug/1715296
also
https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html
Signed-off-by: Patryk Olszewski <patryk@fala.ehost.pl>
Message-Id: <1527105041-21013-1-git-send-email-patryk@fala.ehost.pl>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit fb5e19d2e1 originally fixed the
regression, but was inadvertently broken again in merge commit
2d6752d38d.
Fixes:
https://bugs.launchpad.net/qemu/+bug/1654137
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515152500.19460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 1b2503fcf7.
Unfortunately this fix regresses console handling on MIPS Malta;
since the mux ctrl-a b bug is not a regression since 2.11, we
take the conservative approach and just drop it from 2.12.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All the functions in char-fe.c handle the CharBackend
having a NULL Chardev pointer, which means that the
backend exists but is not connected to anything. The
exception is qemu_chr_fe_init(), which will crash if
passed a NULL Chardev pointer argument. This can happen
for various boards if they're started with 'nodefaults':
arm-softmmu/qemu-system-arm -S -nodefaults -M cubieboard
riscv32-softmmu/qemu-system-riscv32 -nodefaults -M sifive_e
Make qemu_chr_fe_init() accept a NULL chardev. This allows
UART models to handle NULL chardev properties without
generally needing to special case them or to manually
create a NullChardev.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180323152948.27048-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This trips Coverity, which believes the subsequent qio_channel_create_watch
can dereference a NULL pointer. In reality, tcp_chr_connect's callers
all have s->ioc properly initialized, since they are all rooted at
tcp_chr_new_client.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TLS handshake may create background GSource tasks, while we won't know
the correct GMainContext until the whole chardev (including frontend)
inited. Let's postpone the initial TLS handshake until machine done.
For dynamically created tcp chardev, we don't postpone that by checking
the init_machine_done variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[peterx: add missing include line, do unit test]
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180308140714.28906-1-peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
When starting QEMU management apps will usually setup a monitor socket, and
then open it immediately after startup. If not using QEMU's own -daemonize
arg, this process can be troublesome to handle correctly. The mgmt app will
need to repeatedly call connect() until it succeeds, because it does not
know when QEMU has created the listener socket. If can't retry connect()
forever though, because an error might have caused QEMU to exit before it
even creates the monitor.
The obvious way to fix this kind of problem is to just pass in a pre-opened
socket file descriptor for the QEMU monitor to listen on. The management
app can now immediately call connect() just once. If connect() fails it
knows that QEMU has exited with an error.
The SocketAddress(Legacy) structs allow for FD passing via the monitor, and
now via inherited file descriptors from the process that spawned QEMU. The
final missing piece is adding a 'fd' parameter in the socket chardev
options.
This allows both HMP usage, pass any FD number with SCM_RIGHTS, then
running HMP commands:
getfd myfd
chardev-add socket,fd=myfd
Note that numeric FDs cannot be referenced directly in HMP, only named FDs.
And also CLI usage, by leak FD 3 from parent by clearing O_CLOEXEC, then
spawning QEMU with
-chardev socket,fd=3,id=mon
-mon chardev=mon,mode=control
Note that named FDs cannot be referenced in CLI args, only numeric FDs.
We do not wire this up in the legacy chardev syntax, so you cannot use FD
passing with '-qmp', you must use the modern '-mon' + '-chardev' pair.
When passing pre-opened FDs there is a restriction on use of TLS encryption.
It can be used on a server socket chardev, but cannot be used for a client
socket chardev. This is because when validating a server's certificate, the
client needs to have a hostname available to match against the certificate
identity.
An illustrative example of usage is:
#!/usr/bin/perl
use IO::Socket::UNIX;
use Fcntl;
unlink "/tmp/qmp";
my $srv = IO::Socket::UNIX->new(
Type => SOCK_STREAM(),
Local => "/tmp/qmp",
Listen => 1,
);
my $flags = fcntl $srv, F_GETFD, 0;
fcntl $srv, F_SETFD, $flags & ~FD_CLOEXEC;
my $fd = $srv->fileno();
exec "qemu-system-x86_64", \
"-chardev", "socket,fd=$fd,server,nowait,id=mon", \
"-mon", "chardev=mon,mode=control";
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To prepare for handling more address types, refactor the parsing of
socket address information to make it more robust and extensible.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Even if common tn3270 implementations do not support TLS, it is trivial to
have them proxied over a proxy like stunnel which adds TLS at the sockets
layer. We should thus not silently skip tn3270 protocol initialization
when TLS is enabled.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now qio_channel_tls_handshake() is ready to receive the context. Let
socket chardev use it, then the TLS handshake of chardev will always be
with the chardev's context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-9-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows the socket chardev async connection be setup with
non-default gcontext. We do it by postponing the setup to machine done,
since until then we can know which context we should run the async
operation on.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-8-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize the function to create the async QIO task connection. Also,
fix the context pointer to use the chardev's gcontext.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-7-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce ChardevClass.chr_machine_done() hook so that chardevs can run
customized procedures after machine init.
There was an existing mux user already that did similar thing but used a
raw machine done notifier. Generalize it into a framework, and let the
mux chardevs provide such a class-specific hook to achieve the same
thing. Then we can move the mux related code to the char-mux.c file.
Since at it, replace the mux_realized variable with the global
machine_init_done varible.
This notifier framework will be further leverged by other type of
chardevs soon.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-6-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was originally created by qio_channel_add_watch() so it's always
assigning the task to main context. Now we use the new API called
qio_channel_add_watch_source() so that we get the GSource handle rather
than the tag ID.
Meanwhile, caching the gsource and TCPChardevTelnetInit (which holds the
handshake data) in SocketChardev.telnet_source so that we can also do
dynamic context switch when update read handlers.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-5-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCP chardevs can be using QIO network listeners working in the
background when in listening mode. However the network listeners are
always running in main context. This can race with chardevs that are
running in non-main contexts.
To solve this, we need to re-setup the net listeners in
tcp_chr_update_read_handler() with the newly cached gcontext.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-4-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When this commit was applied
commit 9894dc0cdc
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Jan 19 11:14:29 2016 +0000
char: convert from GIOChannel to QIOChannel
The tcp_chr_recv() function was changed to return QIO_CHANNEL_ERR_BLOCK
which corresonds to -2. As such the handling for EAGAIN was able to be
removed from tcp_chr_read(). Unfortunately in a later commit:
commit b6572b4f97
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Mar 11 18:55:24 2016 +0100
char: translate from QIOChannel error to errno
The tcp_chr_recv() function was changed back to return -1, with errno
set to EAGAIN, without also re-addding support for this to tcp_chr_read()
Reported-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180222121351.26191-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Need to free TCPChardevTelnetInit when session established.
Since at it, switch to use G_SOURCE_* macros.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180301084438.13594-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
The following behavior was observed for QEMU configured by libvirt
to use guest agent as usual for the guests without virtio-serial
driver (Windows or the guest remaining in BIOS stage).
In QEMU on first connect to listen character device socket
the listen socket is removed from poll just after the accept().
virtio_serial_guest_ready() returns 0 and the descriptor
of the connected Unix socket is removed from poll and it will
not be present in poll() until the guest will initialize the driver
and change the state of the serial to "guest connected".
In libvirt connect() to guest agent is performed on restart and
is run under VM state lock. Connect() is blocking and can
wait forever.
In this case libvirt can not perform ANY operation on that VM.
The bug can be easily reproduced this way:
Terminal 1:
qemu-system-x86_64 -m 512 -device pci-serial,chardev=serial1 -chardev socket,id=serial1,path=/tmp/console.sock,server,nowait
(virtio-serial and isa-serial also fit)
Terminal 2:
minicom -D unix\#/tmp/console.sock
(type something and press enter)
C-a x (to exit)
Do 3 times:
minicom -D unix\#/tmp/console.sock
C-a x
It needs 4 connections, because the first one is accepted by QEMU, then two are queued by
the kernel, and the 4th blocks.
The problem is that QEMU doesn't add a read watcher after succesful read
until the guest device wants to acquire recieved data, so
I propose to install a separate pullhup watcher regardless of
whether the device waits for data or not.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Message-Id: <20180125135129.9305-1-klim.kireev@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch left in an extra scope layer for ease of
review; time to remove it. No semantic change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-5-eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use of a do/while(0) control flow in order to permit an early break
is an unusual paradigm, and triggers a false positive with a planned
future syntax check against 'while (0);'. Rewrite the code to use a
goto instead. This patch temporarily keeps an extra level of
indentation to highlight the change; the next patch cleans it up.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-4-eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's a replacement of g_timeout_add[_seconds]() for chardevs. Chardevs
now can have dedicated gcontext, we should always bind chardev tasks
onto those gcontext rather than the default main context. Since there
are quite a few of g_timeout_add[_seconds]() callers, a new function
qemu_chr_timeout_add_ms() is introduced.
One thing to mention is that, terminal3270 is still always running on
main gcontext. However let's convert that as well since it's still part
of chardev codes and in case one day we'll miss that when we move it out
of main gcontext too.
Also, convert all the timers from GSource tags into GSource pointers.
Gsource tag IDs and g_source_remove()s can only work with default
gcontext, while now these GSources can logically be attached to other
contexts. So let's use explicit g_source_destroy() plus another
g_source_unref() to remove a timer.
Note: when in the timer handler, we don't need the g_source_destroy()
any more since that'll be done automatically if the timer handler
returns false (and that's what all the current handlers do).
Yet another note: in pty_chr_rearm_timer() we take special care for
ms=1000. This patch merged the two cases into one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idle task will be attached to main gcontext even if the chardev
backend is running in another gcontext. Fix the only caller by
extending the g_idle_add() logic into the more powerful
g_source_attach(). It's basically g_idle_add_full() implementation, but
with the chardev's gcontext passed in.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 6bbb6c0644 ("chardev: use per-dev context for
io_add_watch_poll", 2017-09-22) all the chardev watches are converted to
use per-chardev gcontext to support chardev to be run outside default
main thread. However that's still missing one call from the frontend
code. Touch that up.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating a QIOChannelSocket directly for the chardev
server socket, use a QIONetListener. This provides the ability
to listen on multiple sockets at the same time, so enables
full support for IPv4/IPv6 dual stack.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171218135417.28301-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kirill noticied that on recent versions on QEMU he was not able to
trigger SysRq to invoke debug capabilites of Linux Kernel. He tracked
it down to qemu_chr_be_event() ignoring CHR_EVENT_BREAK due s->be
being NULL. The bug was introduced in 2.8, commit a4afa548fc ("char:
move front end handlers in CharBackend"). Since the commit, the
qemu_chr_be_event() failed to deliver CHR_EVENT_BREAK due to
qemu_chr_fe_init() does not set s->be in case of mux.
Let's fix this by teaching mux to send an event to the frontend with
the focus.
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: a4afa548fc ("char: move front end handlers in CharBackend")
Message-Id: <20171103152824.21948-2-marcandre.lureau@redhat.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Baum device bigger than 84 do not actually exist, but the user's own
Braille device might be wider than 84 columns. Some guest drivers
would be upset by such sizes, so clamp the device size.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20171211001950.27843-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tcp_chr_free_connection & tcp_chr_disconnect methods both
skip all of their cleanup work unless the 's->connected' flag
is set. This flag is set when the incoming client connection
is ready to use. Crucially this is *after* the TLS handshake
has been completed. So if the TLS handshake fails and we try
to cleanup the failed client, all the cleanup is skipped as
's->connected' is still false.
The only important thing that should be skipped in this case
is sending of the CHR_EVENT_CLOSED, because we never got as
far as sending the corresponding CHR_EVENT_OPENED. Every other
bit of cleanup can be robust against being called even when
s->connected is false.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171005155057.7664-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Error process of baum_chr_open needs to set brlapi null, so it won't
get released twice in char_braille_finalize, which will cause
"/usr/bin/qemu-system-x86_64: double free or corruption (!prev)"
Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We had a per-chardev cache for context, then we don't need this
parameter to be passed in every time when chr_update_read_handler()
called. As long as we are calling chr_update_read_handler() using
qemu_chr_be_update_read_handlers() we'll be fine.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1505975754-21555-5-git-send-email-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was only passed in by chr_update_read_handlers(). However when
reconnect, we'll lose that context information. So if a chardev was
running on another context (rather than the default context, the NULL
pointer), it'll switch back to the default context if reconnection
happens. But, it should really stick to the old context.
Convert all the callers of io_add_watch_poll() to use the internally
cached gcontext. Then the context should be able to survive even after
reconnections.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1505975754-21555-4-git-send-email-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It caches the gcontext that is used to poll the chardev IO. Before this
patch, we only passed it in via chr_update_read_handlers(). However
that may not be enough if the char backend is disconnected and
reconnected afterward. There are chardev codes that still assumed the
context be NULL (which is the main context). Will fix that up in
following up patches.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1505975754-21555-3-git-send-email-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a wrapper for the chr_update_read_handler().
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1505975754-21555-2-git-send-email-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
