When running an L=1 cmp instruction on a 64bit PPC CPU with SF off, it
still behaves identical to what it does when SF is on. Remove the implicit
difference in the code.
Also, on most 32bit CPUs we should always treat the compare as 32bit
compare, as the CPU will ignore the L bit. This is not true for e500mc,
but that's up for a different patch.
Reported-by: Torbjorn Granlund <tg@gmplib.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The implementation for rldcl tried to always fetch its
parameters from the opcode, even though the opcode was
already passed in in decoded and different forms.
Use the parameters instead, fixing rldcl.
Reported-by: Torbjorn Granlund <tg@gmplib.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Invalid and privileged SPR warnings currently print the wrong
address. While fixing that, also make it clear that we are
printing both the decimal and hexadecimal SPR number.
Before:
Trying to read invalid spr 896 380 at 0000000000000714
After:
Trying to read invalid spr 896 (0x380) at 0000000000000710
Signed-off-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Power ISA 2.05 adds support for extended mtfsf/mtfsfi form, with a new
W field to select the upper part of the FPCSR register.
For that the helper is changed to handle 64-bit input values and mask with
up to 16 bits. The mtfsf/mtfsfi instructions do not have the W bit
marked as invalid anymore. Instead this is checked in the helper, which
therefore needs to access to the insns/insns_flags2. They are added in
the DisasContext struct. Finally change all accesses to the opcode fields
through extract helpers, prefixed with FP for consistency.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance. The check for odd register
pairs is done using the invalid bits.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance. The check for odd register
pairs is done using the invalid bits.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: fix tcg debug error]
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: fix 32-bit host compile, simplify code]
Signed-off-by: Alexander Graf <agraf@suse.de>
Needed for Power ISA version 2.05 compliance.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
fabs, fnabs and fneg are just flipping the bit sign of an FP register,
this can be implemented in TCG instead of using softfloat.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Broken in b5a73f8d8a, the carry itself was
fixed in 79482e5ab3. But we still need to
produce the full 64-bit addition.
Simplify the conditions at the top of the functions for when we need a
new temporary. Only plain addition is important enough to warrent avoiding
the temporary, and the extra tcg move op that would come with it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The overflow computation of nego and subf*o instructions has been broken
in commit ffe30937. Contrary to other targets, the instruction is subtract
from an not subtract on PowerPC.
This patch fixes the issue by using the correct argument in the xor
computation. Thanks to Peter Maydell for the hint.
With this change the PPC emulation passes the Gwenole Beauchesne
testsuite again.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The set of computations used in b5a73f8d8a
are only valid if the current word size == target_long size. This failed
to take ppc64 in 32-bit (narrow) mode into account.
Add a NARROW_MODE macro to avoid conditional compilation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qemu notionally supports the
620, but since we don't actually have code to implement the segment table,
the support is broken (quite likely in other ways too).
This patch, therefore, removes all remaining pieces of 620 support, to
stop it cluttering up the platforms we actually care about. This includes
removing support for the ASR register, used only on segment table based
machines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While ~T0+T1+CF = T1-T0+CF-1 is true for the low 32-bits,
it does not produce the correct carry-out to bit 33. Do
exactly what the manual says.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Which means that callers need not copy data into local tmps.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In preparation for more efficient setting of these fields.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In r5949 / 76db3ba44e (target-ppc: memory
load/store rework) variable little_endian was replaced with ctx.le_mode.
Update the debug code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The bit that makes a dcbz instruction a dcbzl instruction was declared as
reserved in ppc32 ISAs. However, hardware simply ignores the bit, making
code valid if it simply invokes dcbzl instead of dcbz even on 750 and G4.
Thus, mark the bit as unreserved so that we properly emulate a simple dcbz
in case we're running on non-G5s.
While at it, also refactor the code to check the 970 special case during
runtime. This way we don't need to differenciate between a 970 dcbz and
any other dcbz anymore. We also allow for future improvements to add e500mc
dcbz handling.
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes bug 1031698 :
https://bugs.launchpad.net/qemu/+bug/1031698
If we look at the (truncated) translation of the conditional branch
instruction in the test submitted in the bug post, the call to the
exception helper is missing in the "bne-false" chunk of translated
code :
IN:
bne- 0x1800278
OUT:
0xb544236d: jne 0xb5442396
0xb5442373: mov %ebp,(%esp)
0xb5442376: mov $0x44,%ebx
0xb544237b: mov %ebx,0x4(%esp)
0xb544237f: mov $0x1800278,%ebx
0xb5442384: mov %ebx,0x25c(%ebp)
0xb544238a: call 0x827475a
^^^^^^^^^^^^^^^^^^
0xb5442396: mov %ebp,(%esp)
0xb5442399: mov $0x44,%ebx
0xb544239e: mov %ebx,0x4(%esp)
0xb54423a2: mov $0x1800270,%ebx
0xb54423a7: mov %ebx,0x25c(%ebp)
Indeed, gen_exception(ctx, excp) called by gen_goto_tb (called by
gen_bcond) changes ctx->exception's value to excp's :
gen_bcond()
{
gen_goto_tb(ctx, 0, ctx->nip + li - 4);
/* ctx->exception value is POWERPC_EXCP_BRANCH */
gen_goto_tb(ctx, 1, ctx->nip);
/* ctx->exception now value is POWERPC_EXCP_TRACE */
}
Making the following gen_goto_tb()'s test false during the second call :
if ((ctx->singlestep_enabled &
(CPU_BRANCH_STEP | CPU_SINGLE_STEP)) &&
ctx->exception == POWERPC_EXCP_BRANCH /* false...*/) {
target_ulong tmp = ctx->nip;
ctx->nip = dest;
/* ... and this is the missing call */
gen_exception(ctx, POWERPC_EXCP_TRACE);
ctx->nip = tmp;
}
So the patch simply adds the missing matching case, fixing our problem.
Signed-off-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This patch adds some extra FPU state to CPUPPCState. Specifically,
fpscr is extended to a target_ulong bits, since some recent (64 bit)
CPUs now have more status bits than fit inside 32 bits. Also, we add
the 32 VSR registers present on CPUs with VSX (these extend the
standard FP regs, which together with the Altivec/VMX registers form a
64 x 128bit register file for VSX).
We don't actually support the instructions using these extra registers
in TCG yet, but we still need a place to store the state so we can
sync it with KVM and savevm/loadvm it. This patch updates the savevm
code to not fail on the extended state, but also does not actually
save it - that's a project for another patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Altivec instructions are not working anymore in PowerPC emulation,
following commit d15f74fb, which inverted two registers in the call
to helper. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to
support running 64bit code with MSR_CM set.
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf
Anton Blanchard
Aurelien Jarno
Richard Henderson
David Gibson
Andreas Färber
Peter Maydell
Paolo Bonzini
Evgeny Voevodin
Julio Guerra
Blue Swirl
Stefan Weil