Commit Graph

209 Commits

Author SHA1 Message Date
Kevin O'Connor 224d10ff5a sdhci: Support SDHCI devices on PCI
Support for PCI devices following the "SD Host Controller Simplified
Specification Version 2.00" spec.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:34:44 +01:00
Maciej W. Rozycki dff4021730 mips: Remove CONFIG_VT82C686 from non-Fulong configs
Fix the regression introduced with commit
47934d0aad [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS.  Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).

Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07 11:15:49 +00:00
Alexander Graf 4a761ffa37 PPC: Fix default config ordering and add eTSEC for ppc64
We messed up the ordering in our default configs for PPC. The top entries
are generic entries, then come sections that indicate that features are only
in because of a special feature (such as PReP).

Fix the ordering again and while at it add eTSEC support to the ppc64 target
so that we can spawn eTSEC adapters with qemu-system-ppc64.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08 12:50:54 +02:00
Bastian Koppelmann 0aaeb118b3 target-tricore: Add initialization for translation and activate target
Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-01 14:49:20 +01:00
Vasilis Liaskovitis 10b7e74bf2 pc: implement pc-dimm device abstraction
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
  guest address space

Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.

To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Doug Kwan 9c35126c56 target-ppc: Add a new user mode target for little-endian PPC64.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Tom Musta e58f8d1ff9 target-ppc: Enable Building of libdecnumber
Enable compilation of the newly added libdecnumber library code.
Object file targets are added to Makefile.target using a newly
introduced flag CONFIG_LIBDECNUMBER.  The flag is added
to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu).

Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: add ppcemb and ppc64abi32 config]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:29 +02:00
Cornelia Huck 7b35d0c44c s390x: split flic into kvm and non-kvm parts
Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.

We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.

Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:57 +02:00
Gerd Hoffmann 840a178c94 usb: mtp filesharing
Implementation of a USB Media Transfer Device device for easy
filesharing.  Read-only.  No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-23 10:28:14 +02:00
Fabien Chouteau eb1e7c3e51 Add Enhanced Three-Speed Ethernet Controller (eTSEC)
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:45 +01:00
Peter Maydell c2cb92f9ea Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
   realize/unrealize   as well as migration support via vmsd
 - reboot: Two fixes that make reboot much more reliable
 - ipl: make elf loading more robust
 - flic interrupt controller: This allows to migrate floating
   interrupts, as well as clear them on reset etc.
 - enable async_pf feature of KVM on s390
 - several sclp fixes and cleanups
 - several sigp fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTDwZVAAoJEBF7vIC1phx8lx4P/Rv+UVD9XDFFF8yHuye1am40
 NpRGjdarQ/9QUkS4gqyKwYUvIjAClk5id7U2d5zrfdc8XC49AH0ZhVFMdRupaOon
 AUqXjOXD5zAh9bfUcewg1EK1P1VuKcp0hyh0jFlIqk9Xmidw8N5guQ6iBoTqGJD5
 UYTp0PuSqIjY1RCuF4fCTCurzRd1+J2oKcQBip7BSWlVuWZlg2/hPxoIraLezlz2
 huwOU9tkSGXwSRv4C6fCcukEwlqnvkE6W0MCrHrcb2T8xYwAR2Jjs0TsscbKxb+t
 lIjZRiCxBrFwOLUqGN8DMYtZPffR+cigZ5bYb4o3PPJ0DQL4vLQVd8SPMPrdJhbb
 M7UOaeTclSTQuzmM/Uuc1pmrFc8PDq0dg50dT3weH2bW8aSgyqutYGpmUcm1Q6kq
 JLFuyswOBr1vS9o0TlBunP4+TqJJrnGvtIQ4EbRZm7zP78mBaIIrUcAZlbgOI+XI
 cSjtFXkBOCz0j28J9GSHrsWMC7RQ179TGdcH/FjDpu0dNDOxH7eH5gZPQoQDAqwC
 SjstqJdIFnd0qxOB1EqcgMUxbSqQYq3hoGvJ644ZrMA3T5trBn0fSw3J9ZU/qAK7
 EvOKRacMfcacIj4l0aEQgpwqVmktwIYnkfetX/QAKw/4AImJz/R9GRkmYgjCfOH8
 /CUfXM71zWLEdv1o5uJ5
 =toIt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' into staging

Several features, fixes and cleanups for kvm/s390:

- sclp event facility: cleanup structure. This allows to use
  realize/unrealize   as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
  interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups

* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
  s390x/ipl: Fix crash of ELF images with arbitrary entry points
  s390x/kvm: Rework priv instruction handlers
  s390x/kvm: Add missing SIGP CPU RESET order
  s390x/kvm: Rework SIGP INITIAL CPU RESET handler
  s390x/cpu: Use ioctl to reset state in the kernel
  s390-ccw.img: new binary rom to match latest fixes
  s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
  s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
  s390x/event-facility: exploit realize/unrealize
  s390x/event-facility: add support for live migration
  s390x/event-facility: code restructure
  s390x/event-facility: some renaming
  s390x/sclp: Fixed setting of condition code register
  s390x/sclp: Add missing checks to SCLP handler
  s390x/sclp: Fixed the size of sccb and code parameter
  s390x/eventfacility: mask out commands
  s390x/virtio-hcall: Specification exception for illegal subcodes
  s390x/virtio-hcall: Add range check for hypervisor call
  s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
  s390x/async_pf: Check for apf extension and enable pfault
  ...

Conflicts:
	linux-headers/linux/kvm.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04 14:50:46 +00:00
Mark Cave-Ayland 9eb08a435a sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27 10:01:41 +00:00
Jens Freimann 3a553fc658 s390x/kvm: implement floating-interrupt controller device
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27 09:51:25 +01:00
Andreas Färber aaab89a68e ppcemb-softmmu: Drop Mac and e500 emulation
They are still available in ppc-softmmu and ppc64-softmmu.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-13 17:47:43 +01:00
Peter Maydell f673e70ccc PReP machine and devices
* Cleanups for Raven PCI host bridge
 * Removal of PReP machine and devices from qemu-system-ppcemb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS+Pv3AAoJEPou0S0+fgE/3/EQAKK/J1xVXGv1BCrtrBjct1qt
 ygmZyE3cpjqWGUMvVQG2ReMlPBcwpskEKXjcAJgPtoGF9Ia/RVjccZLalMRL1EcB
 Kiz+iMqjBq8u+mPBBDTZ+ByvtrJpJtvrQng6s+3cATvCzkFVX0TniJJ4mW2PO7CP
 cf4U8NxYTsQNM5kNlbbbB1f2xsem7P00SYusWrra1Lnp9Wzh5fywi4E3cPd/HeQ5
 yrKsHVCP8fbtqI1tR7cCAh5udYK6J+TJKc2AY/g0QYBcIHxBXPo4otIS5Iv4BJJP
 Tp9CvW3KIzw+zpuHTgBEIwv1iywftdjl9XBj5X0LSn0PRQpmkV3rYNOAIAPFg+7X
 86PN1bexme35/aBMXHUuqdRhGosYIFyloC2igscgNfRfkO8FStCX/uf2JzjI+6qY
 IwlkSKHTxPd237pY9fJjdzao+8Nb54UaaK7O5tpUTE8EjGegYsanT4RWiTSpsPYo
 kUiX2rTxahhokXxZ+pLlTlUJT9e3eTw9TYVktvp+r8LpvJET9QmSoyoW7wcNWMet
 VOtCYDltT3EMQzpiwfnTCwWf72WZeX2rS2XNsddulxV0hRDvqHY57mlsyZW7YHpM
 g6WAdMaLzq3xCM9+GDF2GLKfSmQORp5cmke4ldY1/qvbrSn3DahSN7BPA+vMpR3b
 v5ph5fqwiYbch4ofgW1F
 =nxnv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/prep-for-upstream' into staging

PReP machine and devices

* Cleanups for Raven PCI host bridge
* Removal of PReP machine and devices from qemu-system-ppcemb

# gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/prep-for-upstream:
  prep: Drop from ppcemb-softmmu
  raven: Use constant PCI_NUM_PINS instead of 4
  prep: Kill get_system_io() usage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-13 14:52:06 +00:00
Andreas Färber ea81ce06a4 prep: Drop from ppcemb-softmmu
ppcemb covers only embedded processors, which does not include PReP.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-10 17:06:26 +01:00
Beniamino Galvani 22f90bcb2b hw/net: add support for Allwinner EMAC Fast Ethernet controller
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.

Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00
Peter Maydell 13a7f79dfe default-configs: Add config for aarch64-linux-user
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-08 19:07:21 +00:00
liguang 9158fa5451 hw/arm: add allwinner a10 SoC support
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
liguang c3931ee8b4 hw/intc: add allwinner A10 interrupt controller
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
liguang 3589de8c97 hw/timer: add allwinner a10 timer
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Antony Pavlov c6f09eb4a0 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.

There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Peter Maydell 013424d436 default-configs: Add config for aarch64-softmmu
Add a config for aarch64-softmmu; this enables building of this target.
The resulting executable doesn't know about any 64 bit CPUs, but all
the 32 bit CPUs and board models work.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-8-git-send-email-peter.maydell@linaro.org
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2013-12-17 19:42:31 +00:00
Peter Crosthwaite c21c3b53e1 hw/timer: Introduce ARM A9 Global Timer.
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.

Based on version contributed by Francois LEGAL.

Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
 * New commit message
 * Re-implemented as single timer model
 * Fixed backwards counting issue in polled mode
 * completed VMSD fields
 * macroified magic numbers (and headerified reg definitions)
 * split of as device-model-only patch
 * use bitops for 64 bit register access
 * Fixed auto increment mode to check condition properly
 * general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
 * minor typo fixes
 * added missing return after error_setg()
 * dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Andreas Färber 53cb9a1c2f arm11mpcore: Split off SCU device
Inspired by a9scu.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:30 +01:00
Anthony Liguori 1ba1905abd Merge remote-tracking branch 'agraf/ppc-for-upstream' into staging
* agraf/ppc-for-upstream: (29 commits)
  spapr: Use DeviceClass::fw_name for device tree CPU node
  target-ppc: Fill in OpenFirmware names for some PowerPCCPU families
  target-ppc: dump-guest-memory support
  dump-guest-memory: Check for the correct return value
  target-ppc: Use #define for max slb entries
  target-ppc: Check for error on address translation in memsave command
  target-ppc: Update slb array with correct index values.
  spapr-pci: enable irqfd for INTx
  xics-kvm: enable irqfd for MSI
  xics: Implement H_XIRR_X
  xics: Implement H_IPOLL
  xics-kvm: Support for in-kernel XICS interrupt controller
  xics: add cpu_setup callback
  xics: split to xics and xics-common
  xics: add missing const specifiers to TypeInfo
  xics: convert init() to realize()
  xics: add pre_save/post_load dispatchers
  xics: replace fprintf with error_report
  spapr: move cpu_setup after kvmppc_set_papr
  xics: move reset and cpu_setup
  ...

Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 17:01:12 +01:00
Alex Bennée b86160555f integrator: fix Linux boot failure by emulating dbg region
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).

Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.

Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-31 14:00:16 +01:00
David Gibson 11ad93f681 xics-kvm: Support for in-kernel XICS interrupt controller
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM.  This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.

This should give considerable performance improvements.  e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Ákos Kovács b77abd95a9 default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.

Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-16 18:21:01 +02:00
Peter Maydell 66aae5e1ec default-configs: Fix A9MP and A15MP config names
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:32 +01:00
Aurelien Jarno cc413a3935 mips_malta: do not raise exceptions when accessing invalid memory
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.

Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.

Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-14 16:47:30 +02:00
Paolo Bonzini 6dd2a5c98a pc_sysfw: do not make it a device anymore
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com

Rebased.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12 09:31:14 -05:00
Paolo Bonzini 9c9984242c default-configs/ppc64: add all components of i82378 SuperIO chip used by prep
The device provides an ISA bus so that pseries can also run the
endianness test.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini 85d3846a39 default-configs: add SuperIO to SH4
The device provides an ISA bus to run the endianness test on.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini be6d08be25 default-configs: add test device to all machines supporting ISA
This will let these machines run an endianness test for ISA
I/O port space.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini 61fcb62862 isa_mmio: delete
It is not used anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:27 -05:00
Alexey Kardashevskiy 42e5b4c988 pseries: move interrupt controllers to hw/intc/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:23 +02:00
David Gibson 79ca616f29 pci: Cleanup configuration for pci-hotplug.c
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed.  They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface.  This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.

CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too.  In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.

Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386.  The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:45:31 +03:00
Scott Wood d85937e683 kvm/openpic: in-kernel mpic support
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch.  This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).

Note from Alex regarding kvm_irqchip_create():

  On x86, one would call kvm_irqchip_create() to initialize an
  in-kernel interrupt controller.  That function then goes ahead and
  initializes global capability variables as well as the default irq
  routing table.

  On ppc, we can't call kvm_irqchip_create() because we can have
  different types of interrupt controllers.  So we want to do all the
  things that function would do for us in the in-kernel device init
  handler.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
        fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Keith Busch f3c507adcd NVMe: Initial commit for new storage interface
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.

NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:

http://www.nvmexpress.org/

This commit implements the minimum from the specification to work with
existing drivers.

Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17 17:47:59 +02:00
Peter Maydell 187f1bcb9c ppc: Remove CONFIG_FDT conditionals
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
2013-06-14 15:34:19 +01:00
Jan Kiszka 8f3b664f6c audio: Enable all cards
...or they will bitrot to death.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 5181234A.6060504@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:04:49 -05:00
Igor Mammedov f0513d2c01 target-i386: Introduce ICC bus/device/bridge
Provides a hotpluggable bus for APIC and CPU.

* icc-bridge will serve as a parent for icc-bus and provide
  mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
  and IOAPIC devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:06:06 +02:00
Hu Tao eec3d2adc9 introduce a new qom device to deal with panicked event
pvpanic device is used to send guest panic event from guest to qemu.

When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 10:30:01 -05:00
Paolo Bonzini b3e6d591b0 audio: enable PCI audio cards for all PCI-enabled targets
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:17:06 -05:00
Paolo Bonzini 98af93fde2 audio: replace audio card configuration with default-configs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:16:37 -05:00
Anthony Liguori 6165daa4c8 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
  vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi: new device supporting the tcm_vhost Linux kernel module
  virtio: simplify Makefile conditionals
  virtio-scsi: create VirtIOSCSICommon
  vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
  scsi: VMWare PVSCSI paravirtual device implementation
  scsi: avoid assertion failure on VERIFY command

Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22 08:05:05 -05:00
Anthony Liguori 5dff24beba pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
 without ioeventfd in different configurations.  FAST_MMIO will be added if/when
 kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
 695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
 O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
 2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
 bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
 RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
 =jvZE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci: add pci test device

This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations.  FAST_MMIO will be added if/when
kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: add pci test device
  kvm: support non datamatch ioeventfd
  kvm: support any size for pio eventfd
  kvm: remove unused APIs

Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19 08:38:05 -05:00
Dmitry Fleytman 881d588a98 scsi: VMWare PVSCSI paravirtual device implementation
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
  pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 10:44:17 +02:00
Paolo Bonzini 2b6b7099fb configure: eliminate target_libs_softmmu
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18 14:12:31 +02:00