PAPR+ requires two RTAS calls to be supported by the hypervisor in
order to allow hotplugging VCPUs from the guest. The "start-cpu" RTAS
call was already there but "stop-self" was not.
This adds the "stop-self" RTAS call.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The function qemu_notify_event is defined by a header that we don't
include in the PPC KVM code. Include it to get the code building
again.
target-ppc/kvm_ppc.c: In function 'kvmppc_timer_hack':
target-ppc/kvm_ppc.c:26:5: error: implicit declaration of function 'qemu_notify_event' [-Werror=implicit-function-declaration]
target-ppc/kvm_ppc.c:26:5: error: nested extern declaration of 'qemu_notify_event' [-Werror=nested-externs]
Signed-off-by: Alexander Graf <agraf@suse.de>
H_SET_MODE is used for controlling various partition settings. One
of these settings is the endianness a guest takes its exceptions in.
Signed-off-by: Anton Blanchard <anton@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
Registration of global state belongs into realize so move it there.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS
hypercalls which return global IRQ numbers to a guest so it only
operates with those and never touches MSIMessage.
Therefore MSIMessage handling is completely hidden in QEMU.
Previously every sPAPR PCI host bridge implemented its own MSI window
to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci
or vfio) and route them to the guest via qemu_pulse_irq().
MSIMessage used to be encoded as:
.addr - address within the PHB MSI window;
.data - the device index on PHB plus vector number.
The MSI MR write function translated this MSIMessage to a global IRQ
number and called qemu_pulse_irq().
However the total number of IRQs is not really big (at the moment it is
1024 IRQs starting from 4096) and even 16bit data field of MSIMessage
seems to be enough to store an IRQ number there.
This simplifies MSI handling in sPAPR PHB. Specifically, this does:
1. remove a MSI window from a PHB;
2. add a single memory region for all MSIs to sPAPREnvironment
and spapr_pci_msi_init() to initialize it;
3. encode MSIMessage as:
* .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL;
* .data as an IRQ number.
4. change IRQ allocator to align first IRQ number in a block for MSI.
MSI uses lower bits to specify the vector number so the first IRQ has to
be aligned. MSIX does not need any special allocator though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use SLB_ESID_V instead of (1 << 27) in the code
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr-pci config space accessors use find_dev() to find a PCI device.
However find_dev() only searched on a primary bus and did not do
recursive search through secondary buses so config space access was not
possible for devices other that on a primary bus.
This fixed find_dev() by using the PCI API pci_find_device() function.
This effectively enabled pci bridges on spapr.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bit extraction for the FP BF and L field of the MTFSFI and MTFSF
instructions is wrong and doesn't match the reference manual (which
explain the bit number in big endian format). It has been broken in
commit 7d08d85645.
This patch fixes this, which in turn fixes the problem reported by
Khem Raj about the floor() function of libm.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
CC: qemu-stable@nongnu.org (1.6)
Signed-off-by: Alexander Graf <agraf@suse.de>
QEMU has 'dtb' option for specifing the device tree file for the kernel.
The patch adds support for this option to the 'virtex_ml507' machine
implementation.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use info->endian to select the endian of the instruction to
be disassembled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add MSR_LE to the msr_mask for POWER7.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On POWER7, LPCR_ILE is used to control what endian guests take
their exceptions in so use it instead of MSR_ILE.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
A number of users are reporting stalls when using the pseries
hypervisor virtual console.
A simple test case is to paste 15 or 17 characters at a time
into the console. Pasting 15 characters at a time works fine
but pasting 17 characters hangs for a random amount of time.
Other activity (network, qemu monitor etc) unblocks it.
If qemu-char tries to send more than 16 characters at once,
vty_can_receive returns false. At this point we have to
wait for the guest to consume that output. Everything is good
so far.
The problem occurs when the the guest does consume the output.
We need to signal back to the qemu-char layer that we are
ready for more input. Without this we block until something
else kicks us (eg network activity).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we generate the device tree once on machine initialization and then
store the finalized blob in memory to reload it on reset.
This is bad for 2 reasons. First we potentially waste a bunch of RAM for no
good reason, as we have all information required to regenerate the device
tree available anyways.
The second reason is even more important. On machine init when we generate
the device tree for the first time, we don't have all of the devices fully
initialized yet. But the device tree needs to potentially walk devices to
put information about them into the device tree.
Move the generation into a reset function. That way we just generate it new
every time we reset, solving both of the above issues.
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Wenchao Xia (15) and Stefan Weil (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
monitor: improve auto complete of "help" for single command in sub group
monitor: allow "help" show message for single command in sub group
monitor: support sub command in auto completion
monitor: refine monitor_find_completion()
monitor: support sub command in help
monitor: refine parse_cmdline()
monitor: code move for parse_cmdline()
monitor: avoid direct use of global variable *mon_cmds
monitor: split off monitor_data_init()
monitor: call sortcmdlist() only one time
monitor: avoid use of global *cur_mon in readline_completion()
monitor: avoid use of global *cur_mon in monitor_find_completion()
monitor: avoid use of global *cur_mon in block_completion_it()
monitor: avoid use of global *cur_mon in file_completion()
monitor: avoid use of global *cur_mon in cmd_completion()
monitor: Add missing attributes to local function
Message-id: 1377865357-6742-1-git-send-email-lcapitulino@redhat.com
kdump on s390x uses subcode 1 of diagnose 0x308 to put the hardware
in a defined state. This is different from a full reset, since it
does not touch all CPU registers.
These patches define the cpu resets, the subsystem reset a load
function and also wires up the "nmi" command to issue a RESTART
interrupt as defined in the z/Architecture principles of operation.
This allows recent guest kernels with properly setup userspace
to trigger kdump:
- via guest crash
- via nmi from the host
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=vgFh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'borntraeger/tags/kdump' into staging
This is a set of patches dealing with kdump support for s390x/kvm.
kdump on s390x uses subcode 1 of diagnose 0x308 to put the hardware
in a defined state. This is different from a full reset, since it
does not touch all CPU registers.
These patches define the cpu resets, the subsystem reset a load
function and also wires up the "nmi" command to issue a RESTART
interrupt as defined in the z/Architecture principles of operation.
This allows recent guest kernels with properly setup userspace
to trigger kdump:
- via guest crash
- via nmi from the host
# gpg: Signature made Fri 30 Aug 2013 07:19:18 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
# By Christian Borntraeger (5) and Eugene (jno) Dvurechenski (2)
# Via Christian Borntraeger
* borntraeger/tags/kdump:
s390: wire up nmi command to raise a RESTART interrupt on S390
s390: Implement load normal reset
s390/cpu: split CPU reset into architectured functions
s390: provide a cpu load normal function
s390: provide I/O subsystem reset
s390/kvm: basic implementation of diagnose 308 subcode 6
s390x/kvm: Fix switch/case indentation for handle_diag
Message-id: 1377810649-47484-1-git-send-email-borntraeger@de.ibm.com
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.
The CPU to receive the RESTART interrupt is the "default" one.
There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".
In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
"default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
kdump on s390 uses a load normal reset to bring the system in a defined
state by doing a subsystem reset. The issuing CPUs will have an initial
CPU reset, all other CPUs will have a CPU reset as defined in POP (no
register content will change).
Implement this as architectured.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
s390 provides several CPU resets:
- CPU reset, clears interrupts, stop processing, clears TLB, but does
not touch registers
- initial CPU reset, like CPU reset, but also clears PSW, prefix, FPC,
timer and control registers. It does not touch gprs, fprs and acrs (!)
- Power on reset: the full monty
wire up CPUClass reset to the full monty, but provide the lesser resets
as part of S390CPUClass.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now special case "help *" in auto completion can work with sub commands,
such as "help info u*".
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A new parameter type 'S' is introduced to allow user input any string.
"help info block" works normal now.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch allows auto completion work normal for sub command case,
"info block [DEVICE]" can auto complete now, by re-enter the completion
function. In original code "info" is treated as a special case, now it
is treated as a sub command group, global variable info_cmds is not used
any more.
"help" command is still treated as a special case, since it is not a sub
command group but want to auto complete command in root command table.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to support sub command in auto completion, a reentrant function
is needed, so monitor_find_completion() is split into two parts. The
first part does parsing of user input which need to be done only once,
the second part does the auto completion job according to the parsing
result, which contains the necessary code to support sub command and
works as the reentrant function. The global "info_cmds" is still used
in second part, which will be replaced by sub command code later.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The old code in help_cmd() uses global 'info_cmds' and treats it as a
special case. Actually 'info_cmds' is a sub command group of 'mon_cmds',
in order to avoid direct use of it, help_cmd() needs to change its work
mechanism to support sub command and not treat it as a special case
any more.
To support sub command, help_cmd() will first parse the input and then call
help_cmd_dump(), which works as a reentrant function. When it meets a sub
command, it simply enters the function again. Since help dumping needs to
know whole input to printf full help message include prefix, for example,
"help info block" need to printf prefix "info", so help_cmd_dump() takes all
args from input and extra parameter arg_index to identify the progress.
Another function help_cmd_dump_one() is introduced to printf the prefix
and command's help message.
Now help supports sub command, so later if another sub command group is
added in any depth, help will automatically work for it. Still "help info
block" will show error since command parser reject additional parameter,
which can be improved later. "log" is still treated as a special case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since this function will be used by help_cmd() later, so improve
it to make it more generic and easier to use. free_cmdline_args()
is added too as paired function to free the result.
One change of this function is that, when the valid args in input
exceed the limit of MAX_ARGS, it fails now, instead of return with
MAX_ARGS of parsed args in old code. This should not impact much
since it is rare that user input many args in monitor's "help" and
auto complete scenario.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
help_cmd() need this function later, so move it. get_str() is called by
parse_cmdline() so it is moved also. Some code style error reported by
check script, is also fixed.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
New member *cmd_table is added in structure Monitor to avoid direct usage of
*mon_cmds. Now monitor have an associated command table, when global variable
*info_cmds is also discarded, structure Monitor would gain full control about
how to deal with user input.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In qmp_human_monitor_command(), the monitor need to initialized for
basic functionalities, and later more init code will be added, so
split off this function. Note that it is different with QMP mode
monitor which accept json string from monitor's input,
qmp_human_monitor_command() retrieve the human style command from
QMP input, then send the command to a normal mode monitor.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It doesn't need to be done for every monitor, so change it.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now all completion functions do not use *cur_mon any more, instead
they use rs->mon. In short, structure ReadLineState decide where
the complete action would be taken now.
Tested with the case that qemu have two telnet monitors, auto
completion function works normal.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A new local variable *mon is added in monitor_find_completion()
to make compile pass, which will be removed later in
conversion patch for monitor_find_completion().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Function expr_error gets a format string and variable arguments like printf.
It also never returns. Add the necessary attributes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some code needs to perform an IPL-like bootup that mimics the
ESA (31bit) restart. Provide a cpu class method that does so.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Provide a function that resets the I/O subsystem.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Linux uses a check for subcode 6 to decide if other subcodes are
available. Provide a minimal implementation for subcode 6, as well
as for subcode 5.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Move code from kvm.c into misc_helper.c]
This alignes case statements to switch statements in the handle_diag
function as mandated by coding style.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil
# Via Stefan Weil
* sweil/mingw:
gtk: Remove unused include statements which are not portable
w32: Add an icon resource
w32: Fix broken out-of-tree builds (missing version.o)
Message-id: 1377607132-21336-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSGvbsAAoJECgfDbjSjVRp0qsH/2N/b/5bNhL6gx5Kjigzv7Lt
bmCUsSsUm/Rnhke2SpDPVdIOU9W5WIX2zte8qiXuBJi3j/RS9procbgUZrCetpUI
GHQOn+n8e2TX/P9CIcHaN/bA1b+Kx+bvaVbDL/6P2PJvodbDGwDLp/9y+Tisv5Ye
kLow8Y4ZJcaTlmPf/Mh1AnhNa3gel231A3qwugVUNDSyITM6pG/0M07xk8YBj+JJ
6DYrlK0bKMNDxPu5St+YP94D1ODv2zM1aio/TdMUaNfqTZM1iqGTj3zKkBS2PjT0
RhuU2x4N91lY/uCdudtWSj5dYtfRT/xw7qwNAz9IHNz6RlGeX0n++ClMC8z9Y8A=
=Pc09
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into stable-1.5
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 26 Aug 2013 01:34:20 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Markus Armbruster (5) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table
pc_piix: Kill pc_init1() memory region args
pc: pc_compat_1_4() now can call pc_compat_1_5()
pc: Create pc_compat_*() functions
pc: Kill pc_init_pci_1_0()
pc: Don't explode QEMUMachineInitArgs into local variables needlessly
pc: Don't prematurely explode QEMUMachineInitArgs
ppc: Don't duplicate QEMUMachineInitArgs in PPCE500Params
ppc: Don't explode QEMUMachineInitArgs into local variables needlessly
sun4: Don't prematurely explode QEMUMachineInitArgs
q35: Add PCIe switch to example q35 configuration
loader: store FW CFG ROM files in RAM
arch_init: align MR size to target page size
pc: cleanup 1.4 compat support
Message-id: 1377535318-30491-1-git-send-email-mst@redhat.com
Indeed, remove it entirely and remove the is_tcg_gen_code check
from GETPC_EXT.
Fixes https://bugs.launchpad.net/qemu/+bug/1218098 wherein a call
to a "normal" helper function performed a sequence of tail calls
all the way into the memory helper functions, leading to a stack
frame in which the memory helper function appeared to be called
directly from tcg.
Signed-off-by: Richard Henderson <rth@twiddle.net>
In get_physical_address() is a qemu_log() call inside an #if 0 block.
When enabled the following build error is hit:
target-mips/helper.c In function ‘get_physical_address’:
target-mips/helper.c:220:13: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘hwaddr’ [-Werror=format]
Fix the *physical (hwaddr) formatting by using "%"HWADDR_PRIx instead of
TARGET_FMT_lx.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Non-KVM targets fail compilation on the uq/master branch.
Fix the prototype of kvm_irqchip_add_irqfd_notifier to match
the one in kvm-all.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
These include files don't exist for MinGW and are not needed for Linux
(and hopefully for other hosts as well), so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
