QEMU model of the GPIO device on the SiFive E300 series SOCs.
The pins are not used by a board definition yet, however this
implementation can already be used to trigger GPIO interrupts from the
software by configuring a pin as both output and input.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
/4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
YOBmSw==
=2RnL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging
Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-rng-20190522: (25 commits)
target/i386: Implement CPUID_EXT_RDRAND
target/ppc: Use qemu_guest_getrandom for DARN
target/ppc: Use gen_io_start/end around DARN
target/arm: Implement ARMv8.5-RNG
target/arm: Put all PAC keys into a structure
hw/misc/exynos4210_rng: Use qemu_guest_getrandom
hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
aspeed/scu: Use qemu_guest_getrandom_nofail
linux-user: Remove srand call
linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
linux-user: Call qcrypto_init if not using -seed
linux-user: Initialize pseudo-random seeds for all guest cpus
cpus: Initialize pseudo-random seeds for all guest cpus
util: Add qemu_guest_getrandom and associated routines
ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
ui/vnc: Split out authentication_failed
crypto: Change the qcrypto_random_bytes buffer type to void*
crypto: Use getrandom for qcrypto_random_bytes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For user-only, we require only the random number bits of the
crypto subsystem. Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.
Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a vhost-user input backend example, based on virtio-input-host
device. It takes an evdev path as argument, and can be associated with
a vhost-user-input device via a UNIX socket:
$ vhost-user-input -p /dev/input/eventX -s /tmp/vui.sock
$ qemu ... -chardev socket,id=vuic,path=/tmp/vui.sock
-device vhost-user-input-pci,chardev=vuic
This example is intentionally not included in $TOOLS, and not
installed by default.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190514104126.6294-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Move the dependency from SUBDIR_RULES to SOFTMMU_SUBDIR_RULES
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-5-lvivier@redhat.com>
Some directories are built only for softmmu targets,
and the related trace-event-subdirs must do the same
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190401141222.30034-2-lvivier@redhat.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
To ease TLB debugging add a few trace events, which are disabled
by default so that there's no performance impact.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-5-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is only necessary to clear block-obj-y because Makefile.objs
uses "+=" instead of "="; fix that and remove the assignment.
The other variables need not be cleared at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible to specify the trace/ directory already in objs-y;
there is no need to have a separate unnest-vars invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.
Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.
There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.
The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Adding QAPI's .o to util-obj-y, common-obj-y and obj-y is spread over
three places: Makefile.objs takes care of target-independent generated
code, Makefile.target of target-dependent generated code, and
qapi/Makefile.objs of (target-independent) hand-written code.
Do everything in qapi/Makefile.objs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-8-armbru@redhat.com>
The following patches are going to introduce per-target #ifdef in the
schemas.
The introspection data is statically generated once, and must thus be
built per-target to reflect target-specific configuration.
Drop "do_test_visitor_in_qmp_introspect(&qmp_schema_qlit)" since the
schema is no longer in a common object. It is covered by the per-target
query-qmp-schema test instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-7-armbru@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
Remove a dependency on QEMU. Use the existing logging facilities.
Set SLIRP_DEBUG=tftp to get tftp log.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This will allow to have cflags for the whole slirp.mo -objs.
It makes it possible to build tests that links only with
slirp-obj-y (and not the whole common-obj).
It is also a step towards building slirp as a shared library, although
this requires a bit more thoughts to build with
net/slirp.o (CONFIG_SLIRP would need to be 'm') and other build issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Useful when debugging pxeboot, to see what the guest tries to do.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This adds a model of the nRF51 GPIO peripheral.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).
The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pvrdma requires that the same GID attached to it will be attached to the
backend device in the host.
A new QMP messages is defined so pvrdma device can broadcast any change
made to its GID table. This event is captured by libvirt which in turn
will update the GID table in the backend device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names. And for gitignore, use globs to cover all generated
file names.
The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Arm Cortex-M System Design Kit includes a simple watchdog module
based on a 32-bit down-counter. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606191801.6331-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having these entries sorted helps to add new ones.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180528054055.21153-1-f4bug@amsat.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This is the first step towards creating an infrastructure for generic
background jobs that aren't tied to a block device. For now, Job only
stores its ID and JobDriver, the rest stays in BlockJob.
The following patches will move over more parts of BlockJob to Job if
they are meaningful outside the context of a block job.
BlockJob.driver is now redundant, but this patch leaves it around to
avoid unnecessary churn. The next patches will get rid of almost all of
its uses anyway so that it can be removed later with much less churn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add audio/ to common-obj-m variable.
Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJan94lAAoJEHWtZYAqC0IRu+8H/0CUEGgV7N0+y0/4Zo6+Wy1z
tgmGkaZP7f4aVtbaor2nGER93wD5PLdV0Gm9fcl1U80qVqyn+ralCQekid6xDYuC
pW7Wd3XCdk4ME5ifGPa+9j2DjqflL4+QzP08umgfdf8ZLLNFmy5qsixi22BjeuNF
IOwWt8fvqFfYc+okgAgn3GyGklmD+VSOVco3V77/y3nT6/nipRgWDbN6SlrcvZtr
Q0nL67/doeiNeqv7Nz7vwTEgm/VL/s8/Qiz2vZd3/S9Y0XRLQj/XH9LT7NISqpf2
2hrMWRI/f7MGsJFfP4YiYr47oa7/ODQpoZW/rXohPU9XCeRSNmJQgEh9FhjPseo=
=ie5s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-03-07-1' into staging
Merge tpm 2018/03/07
# gpg: Signature made Wed 07 Mar 2018 12:42:13 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-03-07-1:
tpm: convert tpm_tis.c to use trace-events
tpm: convert tpm_emulator.c to use trace-events
tpm: convert tpm_util.c to use trace-events
tpm: convert tpm_passthrough.c to use trace-events
tpm: convert tpm_crb.c to use trace-events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a requested user interface is not available, try loading it as
module, simliar to block layer modules. Needed to keep things working
when followup patches start to build user interfaces as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-8-kraxel@redhat.com
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
Linking code from multiple separate QAPI schemata into the same
program is possible, but involves some weirdness around built-in
types:
* We generate code for built-in types into .c only with option
--builtins. The user is responsible for generating code for exactly
one QAPI schema per program with --builtins.
* We generate code for built-in types into .h regardless of
--builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all
copies of this code are exactly the same, including any combination
of these headers works.
Replace this contraption by something more conventional: generate code
for built-in types into their very own files: qapi-builtin-types.c,
qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but
only with --builtins. Obey --output-dir, but ignore --prefix for
them.
Make qapi-types.h include qapi-builtin-types.h. With multiple
schemata you now have multiple qapi-types.[ch], but only one
qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and
qapi-builtin-visit.[ch].
Bonus: if all you need is built-in stuff, you can include a much
smaller header. To be exploited shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-21-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: fix octal constant for python 3]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device.
It works with its Linux Kernel driver AS IS, no need for any special
guest modifications.
While it complies with the VMware device, it can also communicate with
bare metal RDMA-enabled machines and does not require an RDMA HCA in the
host, it can work with Soft-RoCE (rxe).
It does not require the whole guest RAM to be pinned allowing memory
over-commit and, even if not implemented yet, migration support will be
possible with some HW assistance.
Implementation is divided into 2 components, rdma general and pvRDMA
specific functions and structures.
The second PVRDMA sub-module - interaction with PCI layer.
- Device configuration and setup (MSIX, BARs etc).
- Setup of DSR (Device Shared Resources)
- Setup of device ring.
- Device management.
Reviewed-by: Dotan Barak <dotanb@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
This layer is composed of two sub-modules, backend and resource manager.
Backend sub-module is responsible for all the interaction with IB layers
such as ibverbs and umad (external libraries).
Resource manager is a collection of functions and structures to manage
RDMA resources such as QPs, CQs and MRs.
Reviewed-by: Dotan Barak <dotanb@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have the prerequisites in target/hppa/,
implement the hardware for a PA7100LC.
This also enables build for hppa-softmmu.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Since it is all new code, squashed all branch development
withing hw/hppa/ to a single patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
[for addition of trace-events to hw/pci-host]
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is in preparation for switching code in hw/sparc64 from DPRINTF over to
trace events.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit c37cacabf2 moved tpm_cleanup() in the main loop exit, however this
function is not available when compiling with --disable-tpm.
Provides necessary stubs to keep code clean of #ifdef'fery.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
