For accessing single blocks during boot, it's the logical block size that
matters. (Physical block sizes are rather interesting e.g. for creating
file systems with the correct alignment for speed reasons etc.).
So the s390-ccw bios has to use the logical block size for calculating
sector numbers during the boot phase, the "physical_block_exp" shift
value must not be taken into account. This change fixes the boot process
when the guest hast been installed on a disk where the logical block size
differs from the physical one, e.g. if the guest has been installed
like this:
qemu-system-s390x -nographic -accel kvm -m 2G \
-drive if=none,id=d1,file=fedora.iso,format=raw,media=cdrom \
-device virtio-scsi -device scsi-cd,drive=d1 \
-drive if=none,id=d2,file=test.qcow2,format=qcow2
-device virtio-blk,drive=d2,physical_block_size=4096,logical_block_size=512
Linux correctly uses the logical block size of 512 for the installation,
but the s390-ccw bios tries to boot from a disk with 4096 block size so
far, as long as this patch has not been applied yet (well, it used to work
by accident in the past due to the virtio_assume_scsi() hack that used to
enforce 512 byte sectors on all virtio-block disks, but that hack has been
well removed in commit 5447de2619 to fix other scenarios).
Fixes: 5447de2619 ("pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2112303
Message-Id: <20220805094214.285223-1-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The option generates a lot of warnings for integers casted to pointers,
for example:
/home/pbonzini/work/upstream/qemu/pc-bios/s390-ccw/dasd-ipl.c:174:19: warning: array subscript 0 is outside array bounds of ‘CcwSeekData[0]’ [-Warray-bounds]
174 | seekData->cyl = 0x00;
| ~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLNbVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO1KggArZDxqEOyTCvsu2H1Bf7j2J4Mfx2k
+8FiDNpdfnmpQIc8KnQHZN7QKodXhaPwShoK6NZPYeAbg62n5/RUlF+fj2DbdCN0
udBqt9V5dmjF2S+vb2++pWSpEUpqH1yAVYX3t0MvQDkfscADYYqYndHkYqVP34Sy
sIIkDGdFODQqHCPDmNNFWFHt8X5Zu8t5j53NjPebdryZBDiA4DgFnorTw0sTPV1H
XeS2M06C1lkGyWrdy7eaF9IL3tmlCsuc6xiA0RAhzJiWgHe1LQZOUPMfR+GKuidI
E9Cz05iGyOlH+CNYgdukqT8BdJtcjWZwDgYWVxVIswv461h/asoENUIx1g==
=Nyzq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
When compiling the s390-ccw bios with Clang (v14.0), there is currently
an unuseful warning like this:
CC pc-bios/s390-ccw/ipv6.o
../../roms/SLOF/lib/libnet/ipv6.c:447:18: warning: variable length array
folded to constant array as an extension [-Wgnu-folding-constant]
unsigned short raw[ip6size];
^
SLOF is currently GCC-only and cannot be compiled with Clang yet, so
it is expected that such extensions sneak in there - and as long as
we don't want to compile the code with a compiler that is neither GCC
or Clang, it is also not necessary to avoid such extensions.
Thus these GNU-extension related warnings are completely useless in
the s390-ccw bios, especially in the code that is coming from SLOF,
so we should simply disable the related warnings here now.
Message-Id: <20220704111903.62400-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All the other protytpes in the headers here do not use the "extern"
keyword, so let's unify this by removing the "extern" from the misfits,
too.
Message-Id: <20220704111903.62400-12-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio-blk code uses the block size and geometry fields in the
config area. According to the virtio-spec, these have to be negotiated
with the right feature bits during initialization, otherwise they
might not be available. QEMU is so far very forgiving and always
provides them, but we should not rely on this behavior, so let's
better request them properly via the VIRTIO_BLK_F_GEOMETRY and
VIRTIO_BLK_F_BLK_SIZE feature bits.
Message-Id: <20220704111903.62400-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The next patch is going to add more virtio-block specific code to
virtio_blk_setup_device(), and if the virtio-scsi code is also in
there, this is more cumbersome. And the calling function virtio_setup()
in main.c looks at the device type already anyway, so it's more
logical to separate the virtio-scsi stuff into a new function in
virtio-scsi.c instead.
Message-Id: <20220704111903.62400-10-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It looks nicer if we separate the run_ccw() from the IPL_assert()
statement, and the error message should talk about "virtio device"
instead of "block device", since this code is nowadays used for
non-block (i.e. network) devices, too.
Message-Id: <20220704111903.62400-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Feature negotiation should be done first, since some fields in the
config area can depend on the negotiated features and thus should
rather be read afterwards.
While we're at it, also adjust the error message here a little bit
(the code is nowadays used for non-block virtio devices, too).
Message-Id: <20220704111903.62400-8-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According chapter "3.1.1 Driver Requirements: Device Initialization"
of the Virtio specification (v1.1), a driver for a device has to set
the ACKNOWLEDGE and DRIVER bits in the status field after resetting
the device. The s390-ccw bios skipped these steps so far and seems
like QEMU never cared. Anyway, it's better to follow the spec, so
let's set these bits now in the right spots, too.
Message-Id: <20220704111903.62400-7-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio_assume_scsi() function is very questionable: First, it
is only called for virtio-blk, and not for virtio-scsi, so the naming
is already quite confusing. Second, it is called if we detected a
"invalid" IPL disk, trying to fix it by blindly setting a sector
size of 512. This of course won't work in most cases since disks
might have a different sector size for a reason.
Thus let's remove this strange function now. The calling code can
also be removed completely, since there is another spot in main.c
that does "IPL_assert(virtio_ipl_disk_is_valid(), ...)" to make
sure that we do not try to IPL from an invalid device.
Message-Id: <20220704111903.62400-6-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw bios fails to boot if the boot disk is a virtio-blk
disk with a sector size of 4096. For example:
dasdfmt -b 4096 -d cdl -y -p -M quick /dev/dasdX
fdasd -a /dev/dasdX
install a guest onto /dev/dasdX1 using virtio-blk
qemu-system-s390x -nographic -hda /dev/dasdX1
The bios then bails out with:
! Cannot read block 0 !
Looking at virtio_ipl_disk_is_valid() and especially the function
virtio_disk_is_scsi(), it does not really make sense that we expect
only such a limited disk geometry (like a block size of 512) for
our boot disks. Let's relax the check and allow everything that
remotely looks like a sane disk.
Message-Id: <20220704111903.62400-5-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The logic of trying an final ISO or ECKD boot on virtio-block devices is
very weird: Since the geometry hardly ever matches in virtio_disk_is_scsi(),
virtio_blk_setup_device() always sets a "guessed" disk geometry via
virtio_assume_scsi() (which is certainly also wrong in a lot of cases).
zipl_load_vblk() then sees that there's been a "virtio_guessed_disk_nature"
and tries to fix up the geometry again via virtio_assume_iso9660() before
always trying to do ipl_iso_el_torito(). That's a very brain-twisting
way of attempting to boot from ISO images, which won't work anymore after
the following patches that will clean up the virtio_assume_scsi() mess
(and thus get rid of the "virtio_guessed_disk_nature" here).
Let's try a better approach instead: ISO files always have a magic
string "CD001" at offset 0x8001 (see e.g. the ECMA-119 specification)
which we can use to decide whether we should try to boot in ISO 9660
mode (which we should also try if we see a sector size of 2048).
And if we were not able to boot in ISO mode here, the final boot attempt
before panicking is to boot in ECKD mode. Since this is our last boot
attempt anyway, simply always assume the ECKD geometry here (if the sector
size was not 4096 yet), so that we also do not depend on the guessed disk
geometry from virtio_blk_setup_device() here anymore.
Message-Id: <20220704111903.62400-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use VIRTIO_DASD_DEFAULT_BLOCK_SIZE instead of the magic value 4096.
Message-Id: <20220704111903.62400-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Older versions of Clang complain if there is no prototype for main().
Add one, and while we're at it, make sure that we use the same type
for main.c and netmain.c - since the return value does not matter,
declare the return type of main() as "void".
Message-Id: <20220704111903.62400-2-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the flags passed to the configure script for the ppc cross compiler,
which in fact default to those that are needed to get the 32-bit ISA.
Add the endianness flag so that it remains possible to use a ppc64le
compiler to compile VOF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CFLAGS is not available in pc-bios/s390-ccw/netboot.mak, but the Makefile
needs to access the flags passed to the configure script for the s390x
cross compiler. Fix everything and rename QEMU_CFLAGS to EXTRA_CFLAGS for
consistency with tests/tcg.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The optionrom build is disregarding the flags passed to the configure
script via --cross-cflags-i386. Pass it down and add it to the Makefile.
This will make it possible to get the -m32 flag from $target_cflags to
force a 32-bit build on 64-bit hosts, instead of supplying manually the
arcane -Wa,-32 and linker emulation options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove support for .code16gcc, all supported platforms have -m16.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While container-based cross compilers are not supported, this already
makes it possible to build vof on any machine that has an installation
of GCC and binutils for 32- or 64-bit PowerPC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-27-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
Staring with SEABIOS_HPPA_VERSION 6 the serial ports are now emulated as
on physical hardware, with LASI UART being serial port #0 and DINO UART
as serial port #1. On older versions those ports were swapped.
This SeaBIOS-hppa fix is needed to allow fixing the qemu serial
pass-through from host to guest.
Signed-off-by: Helge Deller <deller@gmx.de>
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New features and fixes in SeaBIOS for hppa/parisc:
* STI firmware now contains additional fonts built-in, which
can be selected with qemu command-line options:
-fw_cfg opt/font,string=1 - a HP 8x16 font
-fw_cfg opt/font,string=2 - a HP 6x13 font
-fw_cfg opt/font,string=3 - a HP 10x20 font
-fw_cfg opt/font,string=4 - a Linux 16x32 font
* Fixed PS/2 keyboard emulation when running in graphical mode.
This allows to type boot commands in the firmware boot menu if
qemu was started with "-boot menu=on" (and no linux kernel was
given on the qemu command line).
* Fix firmware rendenzvous code to clear all pending external intrrupts
before entering the waiting loop.
Signed-off-by: Helge Deller <deller@gmx.de>
Do not rely on the detection that was done in the configure script,
since in the future we may want to cross-compile this file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and
binutils 2.38.
Changes since the previous version:
Christophe Lombard (15):
npu2: move opal api
pau: introduce support
rainier: detect pau devices
pau: assign bars
pau: create phb
pau: enabling opencapi
pau: translation layer configuration
pau: enable interrupt on error
pau: complete phb ops
pau: hmi scom dump
pau: phy init
pau: link training
pau: update current opal call functions
pau: mmio invalidates
pau: Add support for OpenCAPI Persistent Memory devices.
Cédric Le Goater (4):
xive/p10: Fix xive_special_cache_check when DEBUG=1
xive/p10: Fix mismatch errors when DEBUG=1
interrupts: Do not advertise XICS support on P10
skiboot v6.6.6 release notes
Frederic Barrat (6):
phb4/5: Escalate page-level TCE kills
npu3: Remove GPU support on Swift
phb5: Remove obsolete capp-related properties
xive/p10:: Declare xive2 DT node as an interrupt-controller
skiboot v6.0.24 release notes
opal-api: Drop diagnostics data type symbol for PHB5
Michael Ellerman (3):
external/mambo: Print more info when the kernel is too big
doc: Make it clear all existing platforms use Power9N
docs: Add Swift, Mowgli & Rainier
Nicholas Piggin (12):
external/mambo: Updates for POWER10 configuration for DD2.0
external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC
external/mambo: Add POWER10 small-core mode
HBRT: fix clobbered r16 when host services handlers are called
interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo
cpu: cpu_idle_job SMT priority fix
cpu: add debug check in cpu_relax
asm/head: Fix P10 HILE for little endian build
phb4: annotate tbl_pest with endian types
Remove support for POWER8 DD1
phb3: make endian-clean
flash: AST BMC endian fixes
Nick Child (1):
secvar: Free md context on hash error
Ryan Grimm (1):
AWAN simulator support for P10
Vasant Hegde (5):
ci: Bump qemu version
hello_world: Add p10 mambo tests
skiboot v6.7.3 release notes
skiboot v6.8.1 release notes
skiboot v7.0 release notes
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some of the roms build with -march=i486 -m16 which is incompatible
with -fcf-protection. That in turn is can be set by default, for
example in Ubuntu [1].
That causes:
cc1: error: ‘-fcf-protection’ is not compatible with this target
This won't work on -march=i486 -m16 and no matter if set or not we can
override it to "none" if the option is known to the compiler to be
able to build reliably.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/889
[1]: https://wiki.ubuntu.com/ToolChain/CompilerFlags#A-fcf-protection
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220323090713.1002588-1-christian.ehrhardt@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.
Fixes: fc8c745d50 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220208103751.1587902-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New firmware features and fixes:
* Allow up to 16 CPUs
* Add TOC button support:
To trigger a TOC, execute "nmi" in the qemu monitor (Ctrl-A C)
* New opt/hostid fw_cfg option to change hostid:
-fw_cfg opt/hostid,string=334455
* Add opt/console fw_cfg option to select default console:
-fw_cfg opt/console,string=serial
-fw_cfg opt/console,string=graphics
* Add Linux TER16x32 font to STI firmware:
-fw_cfg opt/font,string=2
* Leave IRQs disabled after rendevouz
Signed-off-by: Helge Deller <deller@gmx.de>
Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* KVM_GET/SET_SREGS2 support for x86
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHe0v8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPPgQf/Usiph4SA/MjpqwmLP8ZL64ghWzUm
ZjZRRDC12cApBE/P7/TdzHGwx6IiRu2hWt3wVLFWWEpN7xNwoelrhgLZcr8Dl80P
1b2Pe/BHe1xXI+xC/BgK4qt8sxhSvb9hdFwgz2J4mPSgN64d0sXszm/r56rJ/PXq
T2/M/o6wyFexPhYMQcN/ssQIeQzL8uXTifd7GqpcfRM4iivW1KAFVv9zr+SWqE+7
QavIoRTpBiAb7r0EtuxLrPdgiqkx0OKXE93mwrjM0Anci33hdVHLqe8Zs4gmRzyM
sLqArJwG/kdy2fL8Pc3ncPOxKsBgXDIqfucAJ8Tong1hwLJXiyZnJTxMSg==
=Q2aI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson cleanups
* KVM_GET/SET_SREGS2 support for x86
# gpg: Signature made Wed 12 Jan 2022 13:09:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
meson: reenable filemonitor-inotify compilation
meson: build all modules by default
configure: do not create roms/seabios/config.mak if SeaBIOS not present
tests/tcg: Fix target-specific Makefile variables path for user-mode
KVM: x86: ignore interrupt_bitmap field of KVM_GET/SET_SREGS
KVM: use KVM_{GET|SET}_SREGS2 when supported.
meson: add comments in the target-specific flags section
configure, meson: move config-poison.h to meson
meson: build contrib/ executables after generated headers
configure: move non-command-line variables away from command-line parsing section
configure: parse --enable/--disable-strip automatically, flip default
configure, makefile: remove traces of really old files
configure: do not set bsd_user/linux_user early
configure: simplify creation of plugin symbol list
block/file-posix: Simplify the XFS_IOC_DIOINFO handling
meson: cleanup common-user/ build
user: move common-user includes to a subdirectory of {bsd,linux}-user/
meson: reuse common_user_inc when building files specific to user-mode emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always include the STRIP variable in config-host.mak (it's only used
by the s390-ccw firmware build, and it adds a default if configure
omitted it), and use meson-buildoptions.sh to turn
--enable/--disable-strip into -Dstrip.
The default is now not to strip the binaries like for almost every other
package that has a configure script.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has really just one fix from Stefan, the rest is housekeeping.
The full changelog is:
Alexey Kardashevskiy (3):
Revert "make: Define default rule for .c when V=1 or V=2"
js2x: Fix compile and cleanup
version: update to 20211112
Stefan Berger (1):
tcgbios: Disable platform hierarchy in case of failure
Thomas Huth (8):
Mention the CR vs. LF problem in the documentation
slof/fs/accept: Replace TABs with spaces
Fix the URL to the Linux kernel coding style
lib/libc/README.txt: Fix "cannel" typo
travis.yml: Fix keywords
travis.yml: Update to Focal Fossa
travis.yml: Compile-test the qemu build
Silence some trivial compiler warning in the js2x code
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Add a new option rom for the multiboot loader, using DMA transfers to copy
data instead of "rep insb".
This significantly lowers QEMU's startup latency by a factor of about 40,
for example, going from 30sec to 0.8sec when loading modules of 120MB
in size.
Signed-off-by: Marcus Hähnel <marcus.haehnel@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
[Modified to keep the non-DMA code depending on #ifdef USE_FW_CFG_DMA;
do not write below stack. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables native builds on MSYS2 with symlinks disabled.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Message-Id: <2b5ab039-8495-b55f-03f1-ecfd996907a9@zapateado.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update SeaBIOS to seabios-hppa-v2
Changes in seabios-hppa:
* Include all latest upstream SeaBIOS patches
* add support for the qemu "bootindex" parameter
* add support for the qemu "-boot order=g-m" parameter to choose
SCSI ID
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <YU4st/zcLcg6RKNn@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The edk2 firmware blobs are needed to run bios-tables-test. Unpack
them if any UEFI-enabled target is selected, so that the test can run.
This is a bit more than is actually necessary, since bios-tables-test
does not run for all UEFI-enabled targets, but it is the easiest
way to write this logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It includes support for the POWER10 processor and the QEMU platform.
Built from submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210806180040.156999-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is all about TPM fixes and improvements.
The change log is:
Alexey Kardashevskiy (2):
tcgbios: Fix warnings
version: update to 20210711
Stefan Berger (9):
tcgbios: Fix details in log entries
tcgbios: Fix a typo in the sha256 algo description
tcgbios: Add implementations for sha1, sha384, and sha512
tpm: Add firmware API call 2HASH-EXT-LOG
tcgbios: Change format of S_CRTM_VERSION string to ucs-2
tcgbios: Use assembly for 32 bit rotr in sha256
tcgbios: Use The proper sha function for each PCR bank
tcgbios: Add test cases and test script to run them
Travis: Add script for running tests on Travis
Thomas Huth (1):
Fix bad header guard in version.h
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This addresses the comments from v22.
The functional changes are (the VOF ones need retesting with Pegasos2):
(VOF) setprop will start failing if the machine class callback
did not handle it;
(VOF) unit addresses are lowered in path_offset();
(SPAPR) /chosen/bootargs is initialized from kernel_cmdline if
the client did not change it.
Fixes: 5c991e5d4378 ("spapr: Implement Open Firmware client interface")
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210708065625.548396-1-aik@ozlabs.ru>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.
Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.
This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.
The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.
This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.
This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.
In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.
When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.
This adds basic instances support which are managed by a hash map
ihandle -> [phandle].
Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk
This OF CI does not implement "interpret".
Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.
With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735
The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.
This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.
This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit cc3d15a5ea ("docs: rstfy s390 dasd ipl documentation")
converted docs/devel/s390-dasd-ipl.txt to docs/devel/s390-dasd-ipl.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/s390-dasd-ipl.txt/s390-dasd-ipl.rst/ \
$(git grep -l docs/devel/s390-dasd-ipl.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210517151702.109066-6-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang versions before v11.0 insist on having the %rX or %cX register
names instead of just a number. Since our Travis-CI is currently
still using Clang v6.0, we have to fix this to avoid failing jobs.
Message-Id: <20210512171550.476130-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building on Fedora 34 (gcc version 11.0.0 20210210) we get:
In file included from pc-bios/s390-ccw/main.c:11:
In function ‘memset’,
inlined from ‘boot_setup’ at pc-bios/s390-ccw/main.c:185:5,
inlined from ‘main’ at pc-bios/s390-ccw/main.c:288:5:
pc-bios/s390-ccw/libc.h:28:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
28 | p[i] = c;
| ~~~~~^~~
The offending code is:
memset((char *)S390EP, 0, 6);
where S390EP is a const address:
#define S390EP 0x10008
The compiler doesn't know how big that pointed area is, so it assume that
its length is zero. This has been reported as BZ#99578 to GCC:
"gcc-11 -Warray-bounds or -Wstringop-overread warning when accessing a
pointer from integer literal"
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
As this warning does us more harm than good in the BIOS code (where
lot of direct accesses to low memory are done), silence this warning
for all BIOS objects.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210422145911.2513980-1-philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210502174836.838816-4-thuth@redhat.com>
[thuth: Use the pre-existing cc-option macro instead of adding a new one]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cc-option macro is not doing what it should - compared with the
original from the rules.mak file that got removed with commit
660f793093 ("Makefile: inline the relevant parts of rules.mak"),
the arguments got changed and thus the macro is rather doubling
the QEMU_CFLAGS than adding the flag that should be tested.
Message-Id: <20210502174836.838816-3-thuth@redhat.com>
Fixes: 22fb2ab096 ("pc-bios/s390-ccw: do not use rules.mak")
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler emits a warning:
pc-bios/s390-ccw/main.c:210:5: warning: variable 'found' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
pc-bios/s390-ccw/main.c:214:16: note: uninitialized use occurs here
IPL_assert(found, "Boot device not found\n");
^~~~~
It's a false positive, it only happens because Clang is not smart enough
to see that the panic() function in the "default:" case can never return.
Anyway, let's explicitely mark panic() with "noreturn" to shut up the
warning.
Message-Id: <20210502174836.838816-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are using the compiler to do the linking of the bios files. GCC still
accepts the "-Ttext=..." linker flag directly and is smart enough to
pass it to the linker, but in case we are compiling with Clang, we have
to use the official way with the "-Wl," prefix instead.
Message-Id: <20210423153646.593153-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with clang, it emits a warning like this:
pc-bios/s390-ccw/jump2ipl.c:86:9: warning: indirection of non-volatile null
pointer will be deleted, not trap [-Wnull-dereference]
if (*((uint64_t *)0) & RESET_PSW_MASK) {
^~~~~~~~~~~~~~~~
pc-bios/s390-ccw/jump2ipl.c:86:9: note: consider using __builtin_trap() or
qualifying pointer with 'volatile'
We could add a "volatile" here to shut it up, but on the other hand,
we also have a pointer variable called "reset_psw" in this file already
that points to the PSW at address 0, so we can simply use that pointer
variable instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210423142440.582188-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler complains:
pc-bios/s390-ccw/bootmap.c:302:9: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!mbr->dev_type == DEV_TYPE_ECKD) {
^ ~~
The code works (more or less by accident), since dev_type can only be
0 or 1, but it's better of course to use the intended != operator here
instead.
Fixes: 5dc739f343 ("Allow booting in case the first virtio-blk disk is bad")
Message-Id: <20210421163331.358178-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't read the block if a null block number is reached, because this means that
the end of chunk is reached.
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20210416074736.17409-1-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When QEMU originally supported the ppce500 machine back in Jan 2014,
it was created with a 1:1 mapping of PCI bus address. Things seemed
to change rapidly that in Nov 2014 with the following QEMU commits:
commit e6b4e5f479 ("PPC: e500: Move CCSR and MMIO space to upper end of address space")
and
commit cb3778a045 ("PPC: e500 pci host: Add support for ATMUs")
the PCI memory and IO physical address were moved to beyond 4 GiB,
but PCI bus address remained below 4 GiB, hence a non-identity
mapping was created. Unfortunately corresponding U-Boot updates
were missed along with the QEMU changes and the U-Boot QEMU ppce500
PCI support has been broken since then, until this issue was fixed
recently in U-Boot mainline v2021.04 release, specifically by the
following U-Boot series:
http://patchwork.ozlabs.org/project/uboot/list/?series=230985&state=*
The cross-compilation toolchain used to build the U-Boot image is:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/10.1.0/x86_64-gcc-10.1.0-nolibc-powerpc-linux.tar.xz
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is mostly compiler warnings fixed but while doing this,
a bug in MIN() in tcgbios was found.
Alexey Kardashevskiy (14):
helpers: Define MIN()
libc: Compile with -Wextra
elf: Compile with -Wextra
usb: Compile with -Wextra
veth: Compile with -Wextra
virtio: Compile with -Wextra
e1000: Compile with -Wextra
libnet: Compile with -Wextra
libhv: Compile with -Wextra
libnvram: Compile with -Wextra
libtpm: Compile with -Wextra
slof/prim: Compile with -Wextra
Makefile: Actually compile with -Wextra
version: update to 20210217
Thomas Huth (1):
virtio-serial: Remove superfluous serial-* words
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before the change /usr/share/qemu/firmware/50-edk2-x86_64-secure.json
contained the relative path:
"filename": "share/qemu/edk2-x86_64-secure-code.fd",
"filename": "share/qemu/edk2-i386-vars.fd",
After then change the paths are absolute:
"filename": "/usr/share/qemu/edk2-x86_64-secure-code.fd",
"filename": "/usr/share/qemu/edk2-i386-vars.fd",
The regression appeared in qemu-5.2.0 (seems to be related
to meson port).
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Bug: https://bugs.gentoo.org/766743
Bug: https://bugs.launchpad.net/qemu/+bug/1913012
Signed-off-by: Jannik Glückert <jannik.glueckert@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Message-Id: <20210131143434.2513363-1-slyfox@gentoo.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.
We need the bzip2 program to install the EDK2 firmware blobs
(see commit 623ef637a2 "configure: Check bzip2 is available").
Check if the bzip2 program in the global meson.build to avoid
the configuration to succeed, but a later when trying to install
the firmware blobs:
../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found
Reported-by: John Snow <jsnow@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: c8d5450bba ("configure: move install_blobs from configure to meson")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent binutils changes dropping unsupported options [1] caused a build
issue in regard to the optionroms.
ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \
-s -o multiboot.img multiboot.o
ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
This isn't really a regression in ld.bfd, filing the bug upstream
revealed that this never worked as a ld flag [2] - in fact it seems we
were by accident setting --nmagic).
Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be
droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE
in .mak, therefore we can also remove it from being added there.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d
[2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20201214150938.1297512-1-christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.
Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.
Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:
0x0: 00080000 80010000
------ Ccw0.cda
-- Ccw0.chainData
-- Reserved bits
The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).
Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This also brings in two patches that Debian had to include,
qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120152408.164346-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that the iplb location is only written to low
core for list directed ipl and not for traditional ccw ipl. If we don't
skip this then operating systems that load by reading into low core
memory may fail to start.
We should also not write the iplb pointer for network boot as it might
overwrite content that we got via network.
Fixes: 9bfc04f9ef ("pc-bios: s390x: Save iplb location in lowcore")
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
