To allow VirtFS on darwin, we need to check that pthread_fchdir_np is
available, which has only been available since macOS 10.12.
Additionally, virtfs_proxy_helper is disabled on Darwin. This patch
series does not currently provide an implementation of the proxy-helper,
but this functionality could be implemented later on.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Rebase to master]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Will Cohen: - Add check for pthread_fchdir_np to virtfs
- Add comments to patch commit
- Note that virtfs_proxy_helper does not work
on macOS
- Fully adjust meson virtfs error note to specify
macOS
- Rebase to master]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-12-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.
While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:
Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
patch to avoid qtest breakage during
bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Darwin does not support mknodat. However, to avoid race conditions
with later setting the permissions, we must avoid using mknod on
the full path instead. We could try to fchdir, but that would cause
problems if multiple threads try to call mknodat at the same time.
However, luckily there is a solution: Darwin includes a function
that sets the cwd for the current thread only.
This should suffice to use mknod safely.
This function (pthread_fchdir_np) is protected by a check in
meson in a patch later in this series.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Adjust coding style
- Replace clang references with gcc
- Note radar filed with Apple for missing syscall
- Replace direct syscall with pthread_fchdir_np and
adjust patch notes accordingly
- Declare pthread_fchdir_np with
- __attribute__((weak_import)) to allow checking for
its presence before usage
- Move declarations above cplusplus guard
- Add CONFIG_PTHREAD_FCHDIR_NP to meson and check for
presence in 9p-util
- Rebase to apply cleanly on top of the 2022-02-10
changes to 9pfs
- Fix line over 90 characters formatting error]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-10-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
On darwin `fgetxattr` takes two extra optional arguments,
and the l* variants are not defined (in favor of an extra
flag to the regular variants.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-9-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This implements the darwin equivalent of the functions that were
moved to 9p-util(-linux) earlier in this series in the new
9p-util-darwin file.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-8-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
Because XATTR_SIZE_MAX is not defined on Darwin,
create a cross-platform P9_XATTR_SIZE_MAX instead.
[Will Cohen: - Adjust coding style
- Lower XATTR_SIZE_MAX to 64k
- Add explanatory context related to XATTR_SIZE_MAX]
[Fabian Franz: - Move XATTR_SIZE_MAX reference from 9p.c to
P9_XATTR_SIZE_MAX in 9p.h]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - For P9_XATTR_MAX, ensure that Linux uses
XATTR_SIZE_MAX, Darwin uses 64k, and error
out for undefined hosts]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-7-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Darwin doesn't have either of these flags. Darwin does have
F_NOCACHE, which is similar to O_DIRECT, but has different
enough semantics that other projects don't generally map
them automatically. In any case, we don't support O_DIRECT
on Linux at the moment either.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Adjust coding style]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-6-wwcohen@gmail.com>
[C.S.: - Fix compiler warning "unused label 'again'". ]
Link: https://lore.kernel.org/qemu-devel/11201492.CjeqJxXfGd@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
On darwin d_seekoff exists, but is optional and does not seem to
be commonly used by file systems. Use `telldir` instead to obtain
the seek offset and inject it into d_seekoff, and create a
qemu_dirent_off helper to call it appropriately when appropriate.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Adjust to pass testing
- Ensure that d_seekoff is filled using telldir
on darwin, and create qemu_dirent_off helper
to decide which to access]
[Fabian Franz: - Add telldir error handling for darwin]
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Ensure that telldir error handling uses
signed int
- Cleanup of telldir error handling
- Remove superfluous error handling for
qemu_dirent_off
- Adjust formatting
- Use qemu_dirent_off in codir.c
- Declare qemu_dirent_off as static to prevent
linker error
- Move qemu_dirent_off above the end-of-file
endif to fix compilation]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-5-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Note lack of f_namelen and f_frsize on Darwin
- Ensure that tv_sec and tv_nsec are both
initialized for Darwin and non-Darwin]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-4-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The current file only has the Linux versions of these functions.
Rename the file accordingly and update the Makefile to only build
it on Linux. A Darwin version of these will follow later in the
series.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220227223522.91937-3-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
- Guard Linux only headers.
- Add qemu/statfs.h header to abstract over the which
headers are needed for struct statfs
- Define `ENOATTR` only if not only defined
(it's defined in system headers on Darwin).
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
While it might at first appear that fsdev/virtfs-proxy-header.c would
need similar adjustment for darwin as file-op-9p here, a later patch in
this series disables virtfs-proxy-helper for non-Linux. Allowing
virtfs-proxy-helper on darwin could potentially be an additional
optimization later.
[Will Cohen: - Fix headers for Alpine
- Integrate statfs.h back into file-op-9p.h
- Remove superfluous header guards from file-opt-9p
- Add note about virtfs-proxy-helper being disabled
on non-Linux for this patch series]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-2-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
git shortlog 6a62e0cb0dfe..rel-1.16.0
-------------------------------------
Florian Larysch (1):
nvme: fix LBA format data structure
Jan Beulich via SeaBIOS (1):
nvme: avoid use-after-free in nvme_controller_enable()
Kevin O'Connor (9):
smm: Suppress gcc array-bounds warnings
nvme: Rework nvme_io_readwrite() to return -1 on error
nvme: Add nvme_bounce_xfer() helper function
nvme: Convert nvme_build_prpl() to nvme_prpl_xfer()
nvme: Pass prp1 and prp2 directly to nvme_io_xfer()
nvme: Build the page list in the existing dma buffer
nvme: Only allocate one dma bounce buffer for all nvme drives
sercon: Fix missing GET_LOW() to access rx_bytes
docs: Note v1.16.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The FreeBSD CI definitions now reside in other files than .cirrs.yml.
Update the entry in MAINTAINERS accordingly.
Message-Id: <20220217141138.917292-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Adds clobbers and merges remaining separate asm statements.
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220301214305.2778-1-dmiller423@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: dropped changes to mie3-compl.c, whitespace fixes]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Note that reads zero areas (not dirty in the bitmap) fails, that's
correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add helper that returns both status and output, to be used in the
following commit
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Current scheme of image fleecing looks like this:
[guest] [NBD export]
| |
|root | root
v v
[copy-before-write] -----> [temp.qcow2]
| target |
|file |backing
v |
[active disk] <-------------+
- On guest writes copy-before-write filter copies old data from active
disk to temp.qcow2. So fleecing client (NBD export) when reads
changed regions from temp.qcow2 image and unchanged from active disk
through backing link.
This patch makes possible new image fleecing scheme:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
- copy-before-write does CBW operations and also provides
snapshot-access API. The API may be accessed through
snapshot-access driver.
Benefits of new scheme:
1. Access control: if remote client try to read data that not covered
by original dirty bitmap used on copy-before-write open, client gets
-EACCES.
2. Discard support: if remote client do DISCARD, this additionally to
discarding data in temp.img informs block-copy process to not copy
these clusters. Next read from discarded area will return -EACCES.
This is significant thing: when fleecing user reads data that was
not yet copied to temp.img, we can avoid copying it on further guest
write.
3. Synchronisation between client reads and block-copy write is more
efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
used for writes to temp.qcow2. New scheme is less blocking:
- fleecing reads are never blocked: if data region is untouched or
in-flight, we just read from active-disk, otherwise we read from
temp.img
- writes to temp.img are not blocked by fleecing reads
- still, guest writes of-course are blocked by in-flight fleecing
reads, that currently read from active-disk - it's the minimum
necessary blocking
4. Temporary image may be of any format, as we don't rely on backing
feature.
5. Permission relation are simplified. With old scheme we have to share
write permission on target child of copy-before-write, otherwise
backing link conflicts with copy-before-write file child write
permissions. With new scheme we don't have backing link, and
copy-before-write node may have unshared access to temporary node.
(Not realized in this commit, will be in future).
6. Having control on fleecing reads we'll be able to implement
alternative behavior on failed copy-before-write operations.
Currently we just break guest request (that's a historical behavior
of backup). But in some scenarios it's a bad behavior: better
is to drop the backup as failed but don't break guest request.
With new scheme we can simply unset some bits in a bitmap on CBW
failure and further fleecing reads will -EACCES, or something like
this. (Not implemented in this commit, will be in future)
Additional application for this is implementing timeout for CBW
operations.
Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The new block driver simply utilizes snapshot-access API of underlying
block node.
In further patches we want to use it like this:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.
The other possible application is exporting internal snapshots of
qcow2, like this:
[guest] [NBD export]
| |
| root | root
v file v
[qcow2]<---------[snapshot-access]
For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to wait for all intersecting requests.
To be used in the further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.
Note: while being here, fix tiny typo in MAINTAINERS.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This brings "incremental" mode to copy-before-write filter: user can
specify bitmap so that filter will copy only "dirty" areas.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to complicate bitmap initialization in the further
commit. And in future, backup job will be able to work without filter
(when source is immutable), so we'll need same bitmap initialization in
copy-before-write filter and in backup job. So, it's reasonable to do
it in block-copy.
Note that for now cbw_open() is the only caller of
block_copy_state_new().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.
With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).
Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point. (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.) Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.
(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
suggested by Vladimir; and rebased on 9086c76398
("tests/qemu-iotests: Rework the checks and spots using GNU
sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.
To test this condition, run "configure" for example with:
--block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read
so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Coverity points out that we aren't checking the return value
from curl_easy_setopt() for any of the calls to it we make
in block/curl.c.
Some of these options are documented as always succeeding (e.g.
CURLOPT_VERBOSE) but others have documented failure cases (e.g.
CURLOPT_URL). For consistency we check every call, even the ones
that theoretically cannot fail.
Fixes: Coverity CID 1459336, 1459482, 1460331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-3-peter.maydell@linaro.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In curl_open(), the 'out' label assumes that the state->errmsg string
has been set (either by curl_easy_perform() or by manually copying a
string into it); however if curl_init_state() fails we will jump to
that label without setting the string. Add the missing error string
setup.
(We can't be specific about the cause of failure: the documentation
of curl_easy_init() just says "If this function returns NULL,
something went wrong".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220222152341.850419-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
When we still have an AIOCB registered for DMA operations, we try to
settle the respective operation by draining the BlockBackend associated
with the IDE device.
However, this assumes that every DMA operation is associated with an
increment of the BlockBackend’s in-flight counter (e.g. through some
ongoing I/O operation), so that draining the BB until its in-flight
counter reaches 0 will settle all DMA operations. That is not the case:
For TRIM, the guest can issue a zero-length operation that will not
result in any I/O operation forwarded to the BlockBackend, and also not
increment the in-flight counter in any other way. In such a case,
blk_drain() will be a no-op if no other operations are in flight.
It is clear that if blk_drain() is a no-op, the value of
s->bus->dma->aiocb will not change between checking it in the `if`
condition and asserting that it is NULL after blk_drain().
The particular problem is that ide_issue_trim() creates a BH
(ide_trim_bh_cb()) to settle the TRIM request: iocb->common.cb() is
ide_dma_cb(), which will either create a new request, or find the
transfer to be done and call ide_set_inactive(), which clears
s->bus->dma->aiocb. Therefore, the blk_drain() must wait for
ide_trim_bh_cb() to run, which currently it will not always do.
To fix this issue, we increment the BlockBackend's in-flight counter
when the TRIM operation begins (in ide_issue_trim(), when the
ide_trim_bh_cb() BH is created) and decrement it when ide_trim_bh_cb()
is done.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2029980
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220120142259.120189-1-hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
The exrl-trt* tests use two pre-initialized variables for the
results of the assembly code:
uint64_t r1 = 0xffffffffffffffffull;
uint64_t r2 = 0xffffffffffffffffull;
But then the assembly code copies over the full contents
of the register into the output variable, without taking
care of this pre-initialized values:
" lgr %[r1],%%r1\n"
" lgr %[r2],%%r2\n"
The code then finally compares the register contents to
a value that apparently depends on the pre-initialized values:
if (r2 != 0xffffffffffffffaaull) {
write(1, "bad r2\n", 7);
return 1;
}
This all works with GCC, since the 0xffffffffffffffff got into
the r2 register there by accident, but it fails completely with
Clang.
Let's fix this by declaring the r1 and r2 variables as proper
register variables instead, so the pre-initialized values get
correctly passed into the inline assembly code.
Message-Id: <20220301092431.1448419-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These instructions use addressing with a "base address", meaning
that if register r0 is used, it is always treated as zero, no matter
what value is stored in the register. So we have to make sure not
to use register r0 for these instructions in our tests. There was
no problem with GCC so far since it seems to always pick other
registers by default, but Clang likes to chose register r0, too,
so we have to use the "a" constraint to make sure that it does
not pick r0 here.
Message-Id: <20220301093911.1450719-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-2-philippe.mathieu.daude@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-3-philippe.mathieu.daude@gmail.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This can allow the guest OS to determine more easily if i8042 controller
is present in the system or not, so it doesn't need to do probing of the
controller, but just initialize it immediately, before enumerating the
ACPI AML namespace.
The 8042 bit in IAPC_BOOT_ARCH was introduced from ACPI spec v2 (FADT
revision 2 and above). Therefore, in this change, we only enable this bit for
x86/q35 machine types since x86/i440fx machines use FADT ACPI table with
revision 1.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The FACP table is going to be changed for x86/q35 machines. To be sure
the following changes are not breaking any QEMU test this change follows
step 2 from the bios-tables-test.c guide on changes that affect ACPI
tables.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
HexagonCPU field parent_class is of type CPUClass, which
is declared in "hw/core/cpu.h".
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-11-f4bug@amsat.org>
Keno Fischer
Will Cohen
Gerd Hoffmann
Thomas Huth
David Miller
Vladimir Sementsov-Ogievskiy
Hanna Reitz
Peter Maydell
Philippe Mathieu-Daudé
Liav Albani