Commit Graph

13 Commits

Author SHA1 Message Date
Peter Maydell 2e11986727 hw/net/stellaris_enet: Convert to vmstate
Convert this device to use vmstate for its save/load, including
providing a post_load function that sanitizes inbound data to
avoid possible buffer overflows if it is malicious.

The sanitizing fixes CVE-2013-4532 (though nobody should be
relying on the security properties of most of the unmaintained
ARM board models anyway, and migration doesn't actually
work on this board due to issues in other device models).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-13 16:09:38 +01:00
Peter Maydell 889ac2a32f hw/net/stellaris_enet: Get rid of rx_fifo pointer
The rx_fifo pointer is awkward to migrate, and is actually
redundant since it is always possible to determine it from
the current rx[].len/.data and rx_fifo_len. Remove both
rx_fifo and rx_fifo_len from the state, replacing them with
a simple rx_fifo_offset which points at the current location
in the RX fifo.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13 16:09:37 +01:00
Peter Maydell eacd606ca7 hw/net/stellaris_enet: Fix debug format strings
Fix various debug format strings which were incorrect for the
data type, so that building with debug enabled is possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13 16:09:37 +01:00
Peter Maydell a9171c4fb5 hw/net/stellaris_enet: Correctly implement the TR and THR registers
Packet transmission for the stellaris ethernet controller can be triggered
in one of two ways:
 * by setting a threshold value in the THR register; when the FIFO
   fill level reaches the threshold, the h/w starts transmitting.
   Software has to finish filling the FIFO before the transmit
   process completes to avoid a (silent) underrun
 * by software writing to the TR register to explicitly trigger
   transmission

Since QEMU transmits packets instantaneously (from the guest's
point of view), implement "transmit based on threshold" with
our existing mechanism of "transmit as soon as we have the whole
packet", with the additional wrinkle that we don't transmit if
the packet size is below the specified threshold, and implement
"transmit by specific request" properly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13 16:09:37 +01:00
Peter Maydell c6fa443b3d hw/net/stellaris_enet: Rewrite tx fifo handling code
The datasheet is clear that the frame length written to the DATA
register is actually stored in the TX FIFO; this means we don't
need to keep both tx_frame_len and tx_fifo_len state separately.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13 16:09:36 +01:00
Peter Maydell 7fd5f064d1 hw/net/stellaris_enet: Correct handling of packet padding
The PADEN bit in the transmit control register enables padding of short
data packets out to the required minimum length. However a typo here
meant we were adjusting tx_fifo_len rather than tx_frame_len, so the
padding didn't actually happen. Fix this bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
2014-05-13 16:09:36 +01:00
Peter Maydell 5c10495ab1 hw/net/stellaris_enet: Restructure tx_fifo code to avoid buffer overrun
The current tx_fifo code has a corner case where the guest can overrun
the fifo buffer: if automatic CRCs are disabled we allow the guest to write
the CRC word even if there isn't actually space for it in the FIFO.
The datasheet is unclear about exactly how the hardware deals with this
situation; the most plausible answer seems to be that the CRC word is
just lost.

Implement this fix by separating the "can we stuff another word in the
FIFO" logic from the "should we transmit the packet now" check. This
also moves us closer to the real hardware, which has a number of ways
it can be configured to trigger sending the packet, some of which we
don't implement.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
2014-05-13 16:09:36 +01:00
Peter Maydell 106a73b6d2 hw/net/stellaris_enet: Avoid unintended sign extension
Add a cast to avoid an unintended sign extension that
would mean we returned 0xffffffff in the high 32 bits
for an IA0 read if bit 31 in the MAC address was 1.
(This is harmless since we'll only be doing 4 byte
reads, but it could be confusing, so best avoided.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-3-git-send-email-peter.maydell@linaro.org
2014-02-26 17:19:58 +00:00
Andreas Färber 0618db44b9 stellaris_enet: Fix NetClientInfo::cleanup
Drop freeing stellaris_enet_state - that is done by QOM later on unref.

Both MemoryRegion init and savevm registration happen in SysBusDevice
initfn currently, so move them into an unrealizefn for now.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:59 +02:00
Andreas Färber 2fa30abadf stellaris_enet: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:59 +02:00
Paolo Bonzini eedfac6f38 hw/n*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini 2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Paolo Bonzini d7e35d4a84 hw: move NICs to hw/net/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00