When doing bitblt copy in backward mode, we should minus the
blt width first just like the adding in the forward mode. This
can avoid the oob access of the front of vga's vram.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
{ kraxel: with backward blits (negative pitch) addr is the topmost
address, so check it as-is against vram size ]
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: d3532a0db0 (CVE-2014-8106)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485938101-26602-1-git-send-email-kraxel@redhat.com
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Apply the cirrus_addr_mask to cirrus_blt_dstaddr and cirrus_blt_srcaddr
right after assigning them, in cirrus_bitblt_start(), instead of having
this all over the place in the cirrus code, and missing a few places.
Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485338996-17095-1-git-send-email-kraxel@redhat.com
The rops used by cirrus_bitblt_common_patterncopy only use
the destination pitch, so the source pitch shoul allowed to
be zero and the blit with used for the range check around the
source address.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485272138-23249-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cirrus_invalidate_region() calls memory_region_set_dirty()
on a per-line basis, always ranging from off_begin to
off_begin+bytesperline. With a negative pitch off_begin
marks the top most used address and thus we need to do an
initial shift backwards by a line for negative pitches of
backward blits, otherwise the first iteration covers the
line going from the start offset forwards instead of
backwards.
Additionally since the start address is inclusive, if we
shift by a full `bytesperline` we move to the first address
*not* included in the blit, so we only shift by one less
than bytesperline.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485352137-29367-1-git-send-email-w.bumiller@proxmox.com
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace variables with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity points out that calculating src_len by multiplying
src_width by rows could overflow. This can only happen in
the implausible case of a framebuffer larger than 4GB, but
we may as well fix it, placating Coverity. (CID1005515)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't truncate the multiplication and do a 64 bit one instead
because the result is stored in a 64 bit variable.
This fixes a similar coverity warning to commit 237a8650d6,
in a similar way, and is the other half of the fix for
coverity CID 1167561.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Coverity points out that if we fail in the "creating resources"
loop in virtio_gpu_load() we will leak various resources (CID 1356431).
Failing a VM load is going to leave the simulation in a complete mess,
but we can tidy up to the point that a full system reset should
get us back to sanity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483969123-14839-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'hostmem' field in VirtIOGPU is used to track the total memory
used in pixmaps so that we can impose a maximum limit on it.
However this field is neither migrated nor recalculated on
VM load, which means that after a migration it will be incorrectly
too low, which can allow the guest to use more pixmap memory
than it should. The per-resource hostmem fields are not filled
in either as we reallocate them in the load function.
Recalculate the memory used for each pixmap and the total memory
used as we reallocate the pixmaps in virtio_gpu_load().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483969123-14839-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 4299b90 added a check which is too broad, given that the source
pitch value is not required to be initialized for solid fill operations.
This patch refines the blit_is_unsafe() check to ignore source pitch in
that case. After applying the above commit as a security patch, we
noticed the SLES 11 SP4 guest gui failed to initialize properly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20170109203520.5619-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In virgl_cmd_get_capset function, it uses g_malloc to allocate
a response struct to the guest. As the 'resp'struct hasn't been full
initialized it will lead the 'resp->padding' field to the guest.
Use g_malloc0 to avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 58188cae.4a6ec20a.3d2d1.aff2@mx.google.com
[ kraxel: resolved conflict ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a return value to the event handler. Some I2C devices will
NAK if they have no data, so allow them to do this. This required
the following changes:
Go through all the event handlers and change them to return int
and return 0.
Modify i2c_start_transfer to terminate the transaction on a NAK.
Modify smbus handing to not assert if a NAK occurs on a second
operation, and terminate the transaction and return -1 instead.
Add some information on semantics to I2CSlaveClass.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the resource attach backing function, everytime it will
allocate 'res->iov' thus can leading a memory leak. This
patch avoid this.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-id: 1483003721-65360-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the virgl_renderer_resource_attach_iov function fails the
'res_iovs' will be leaked. Add check of the return value to
free the 'res_iovs' when failing.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1482999086-59795-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the guest destroy the resource before detach banking, the 'iov'
and 'addrs' field in resource is not freed thus leading memory
leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1480386565-10077-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes virtio-gpu track host memory allocations for ressources
and applies a limit (configurable 256M by default). When exceeding the
limit virtio-gpu throws VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY errors (like
it already does today when pixman image allocations fail).
This patch covers 2d mode only. For 3d mode we have to figure how we
are going to handle this best. qemu doesn't track resources in case
virglrenderer is used, so I guess we should extend virglrenderer to
allow setting a limit, then let qemu set the limit and catch
virgl_renderer_resource_create failures.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1480423356-22255-1-git-send-email-kraxel@redhat.com
Virtio GPU device while processing 'VIRTIO_GPU_CMD_GET_CAPSET'
command, retrieves the maximum capabilities size to fill in the
response object. It continues to fill in capabilities even if
retrieved 'max_size' is zero(0), thus resulting in OOB access.
Add check to avoid it.
Reported-by: Zhenhao Hong <zhenhaohong@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20161214070156.23368-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In Cirrus CLGD 54xx VGA Emulator, if cirrus graphics mode is VGA,
'cirrus_get_bpp' returns zero(0), which could lead to a divide
by zero error in while copying pixel data. The same could occur
via blit pitch values. Add check to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1476776717-24807-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In update_cursor_data_virgl function, if the 'width'/ 'height'
is not equal to current cursor's width/height it will return
without free the 'data' allocated previously. This will lead
a memory leak issue. This patch fix this issue.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 58187760.41d71c0a.cca75.4cb9@mx.google.com
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In virgl_cmd_get_capset_info dispatch function, the 'resp' hasn't
been full initialized before writing to the guest. This will leak
the 'resp.padding' and 'resp.hdr.padding' fieds to the guest. This
patch fix this issue.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5818661e.0860240a.77264.7a56@mx.google.com
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if the client keeps sending the same monitor config to
QEMU/spice-server, QEMU will always raise
a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG regardless of whether there was a
change or not.
Guest-side (with fedora 25), the kernel QXL KMS driver will also forward the
event to user-space without checking if there were actual changes.
Next in line are gnome-shell/mutter (on a default f25 install), which
will try to reconfigure everything without checking if there is anything
to do.
Where this gets ugly is that when applying the resolution changes,
gnome-shell/mutter will call drmModeRmFB, drmModeAddFB, and
drmModeSetCrtc, which will cause the primary surface to be destroyed and
recreated by the QXL KMS driver. This in turn will cause the client to
resend a client monitors config message, which will cause QEMU to reemit
an interrupt with an unchanged monitors configuration, ...
This causes https://bugzilla.redhat.com/show_bug.cgi?id=1266484
This commit makes sure that we only emit
QXL_INTERRUPT_CLIENT_MONITORS_CONFIG when there are actual configuration
changes the guest should act on.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161028144840.18326-1-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prepare xen_be_find_xendev to be shared with frontends:
* xen_be_find_xendev -> xen_pv_find_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_send_notify to be shared with frontends:
* xen_be_send_notify -> xen_pv_send_notify
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_unbind_evtchn to be shared with frontends:
* xen_be_unbind_evtchn -> xen_pv_unbind_evtchn
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_printf to be used by both backend and frontends:
* xen_be_printf -> xen_pv_printf
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes:
* WARNING: line over 80 characters
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes the following errors:
* ERROR: line over 90 characters
* ERROR: code indent should never use tabs
* ERROR: space prohibited after that open square bracket '['
* ERROR: do not initialise statics to 0 or NULL
* ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Don't truncate the multiplication and do a 64 bit one instead because
because the result is stored in a 64 bit variable.
Spotted by coverity, CID 1167561.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In virtio gpu resource create dispatch, if the pixman format is zero
it doesn't free the resource object allocated previously. Thus leading
a host memory leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 57df486e.8379240a.c3620.ff81@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 20161023091816.3839-5-zxq_yx_007@163.com
[PMM: added accidentally dropped blank line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Bumps version number because we now use the VMSTATE_SSI_SLAVE that
only uses a byte rather than a 32bit (for saving a bool 'cs').
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1472035246-12483-2-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't hotplug display adapters in qemu, tag virtio-gpu-pci
accordingly (virtio-vga already has this).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1473319037-27645-1-git-send-email-kraxel@redhat.com
When processing svga command DEFINE_CURSOR in vmsvga_fifo_run,
the computed BITMAP and PIXMAP size are checked against the
'cursor.mask[]' and 'cursor.image[]' array sizes in bytes.
Correct these checks to avoid OOB memory access.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1473338754-15430-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
