Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6638 c046a42c-6fe2-441c-8c8c-71466251a162
pthread_cond_timedwait is allowed to both consume the signal and
return with the value indicating the timeout, hence predicate should
always be (re)checked before taking an action
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6634 c046a42c-6fe2-441c-8c8c-71466251a162
Avoid repeated creation/initalization/destruction of attr and calls to
getpid
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6633 c046a42c-6fe2-441c-8c8c-71466251a162
Broadcast was used so that the I/O threads would wakeup, reset their
ts values and all but one go to sleep, in other words an optimization
to prevent threads from exiting in presence of continuing I/O
activity. Spurious wakeups make the looping around cond_timedwait with
ever reinitialized ts potentially unsafe and as such ts in no longer
reinitilized inside the loop, hence switch to signal is warranted and
this benefits of this particlaur optimization are lost.
(It's worth noting that timed variants of pthread calls use realtime
clock by default, and therefore can hang "forever" should the host
time be changed. Unfortunatelly not all host systems QEMU runs on
support CLOCK_MONOTONIC and/or pthread_condattr_setclock with this
value)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6632 c046a42c-6fe2-441c-8c8c-71466251a162
KVM uses cpu_physical_memory_rw() to access the I/O devices. When a
read or write with a length of 8-byte is requested, it is split into 2
4-byte accesses.
This has been broken in revision 5849. After this revision, only the
first 4 bytes are actually read/write to the device, as the target
address is changed, so on the next iteration of the loop the next 4
bytes are actually read/written elsewhere (in the RAM for the graphic
card).
This patch fixes screen corruption (and most probably data corruption)
with FreeBSD/amd64. Bug #2556746 in KVM bugzilla.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6628 c046a42c-6fe2-441c-8c8c-71466251a162
No need to check for failing qemu_malloc anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6626 c046a42c-6fe2-441c-8c8c-71466251a162
For STS register bit are cleared by writing 1 into it.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6624 c046a42c-6fe2-441c-8c8c-71466251a162
cirrus_do_copy() in hw/cirrus_vga.c seems to make some incorrect assumptions
about video memory layout. It tries to convert addresses to coordinates
assuming that one row of data is (width * depth) bytes long. The correct way
seems to be to use the pitch fields in the CirrusVGAState structure instead.
Without this patch, I get lots of screen corruption when I try to drag a window
under X as it's passing the wrong coordinates to the display surface for the
copy. With this patch I can drag a window with no screen corruption.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6622 c046a42c-6fe2-441c-8c8c-71466251a162
Change structure associated with a display from VncState to a new structure
VncDisplay. Remove client specific fields from VncDisplay. Remove display
specific fields from VncState. Maintain a linked list of VncStates per
VncDisplay structure, update as necessary. When updates/resizes/copies come in
from the hardware, dispatch to all clients.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6621 c046a42c-6fe2-441c-8c8c-71466251a162
Incrementing the array index was missed in the previous series which causes
us to not store all the values.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6617 c046a42c-6fe2-441c-8c8c-71466251a162
[ As requested, broken out of the monitor rework series. ]
Avoid a segfault when the user issues 'change vnc' without having vnc
enabled on startup.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6616 c046a42c-6fe2-441c-8c8c-71466251a162
For qemu_realloc with size == 0 a result of NULL is perfectly fine
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6615 c046a42c-6fe2-441c-8c8c-71466251a162
Since we don't generate any "old op" anymore, the old_op_count
is unneeded.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6614 c046a42c-6fe2-441c-8c8c-71466251a162
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success.
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
Save QEMUMachine necessary for drive_init.
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
This code parses full PCI device addresses. It then rejects domains
other than zero, because these are not supported in QEMU.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6609 c046a42c-6fe2-441c-8c8c-71466251a162
Enable the corresponding bit on the PCIST region and trigger the SCI
and handle the _EJ0 notifications.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6608 c046a42c-6fe2-441c-8c8c-71466251a162
If the io port is unassigned, the previous private pointer is
meaningless.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6606 c046a42c-6fe2-441c-8c8c-71466251a162
Otherwise the PCI size for such regions can be calculated erroneously.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6604 c046a42c-6fe2-441c-8c8c-71466251a162
Unregister the pci device, unassign its IO and memory regions, and free
associated data.
Add a callback so drivers can free device state.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6603 c046a42c-6fe2-441c-8c8c-71466251a162
So drivers can clear their mem io table entries on exit back to unassigned
state.
Also make the io mem index allocation dynamic.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6601 c046a42c-6fe2-441c-8c8c-71466251a162
Export net/drive add/remove functions for device hotplug usage.
Return the table index on add.
Return failure instead of exiting if limit has been reached
on drive_add.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6599 c046a42c-6fe2-441c-8c8c-71466251a162
Device hotplug will use that structure from a separate
file.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6598 c046a42c-6fe2-441c-8c8c-71466251a162
Record PCIDev on the BlockDriverState structure to locate for release
on hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6597 c046a42c-6fe2-441c-8c8c-71466251a162
To be used by hot-remove.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6596 c046a42c-6fe2-441c-8c8c-71466251a162
Dynamically allocate nic info index, so to reuse indexes when devices are
removed.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6595 c046a42c-6fe2-441c-8c8c-71466251a162
Change the PCI network drivers init functions to return the PCIDev, to
inform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on
hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
Add pci_find_bus/pci_find_device to be used by PCI hotplug.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
