Keep a separate list of migration notifiers for each migration mode.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-8-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Define MigrationNotifyFunc to improve type safety and simplify migration
notifiers.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Passing MigrationState to notifiers is unsound because they could access
unstable migration state internals or even modify the state. Instead, pass
the minimal info needed in a new MigrationEvent struct, which could be
extended in the future if needed.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Change all migration notifiers to type NotifierWithReturn, so notifiers
can return an error status in a future patch. For now, pass NULL for the
notifier error parameter, and do not check the return value.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-4-git-send-email-steven.sistare@oracle.com
[peterx: dropped unexpected update to roms/seabios-hppa]
Signed-off-by: Peter Xu <peterx@redhat.com>
Remove the error object from opaque data passed to notifiers.
Use the new error parameter passed to the notifier instead.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Pass an error object as the third parameter to "notifier with return"
notifiers, so clients no longer need to bundle an error object in the
opaque data. The new parameter is used in a later patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Both socket_send_channel_destroy() and multifd_send_channel_destroy() are
unnecessary wrappers to destroy an IOC, as the only thing to do is to
release the final IOC reference. We have plenty of code that destroys an
IOC using direct unref() already; keep that style.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240222095301.171137-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
outgoing_args is a global cache of socket address to be reused in multifd.
Freeing the cache in per-channel destructor is more or less a hack. Move
it to multifd_send_cleanup_state() so it only get checked once. Use a
small helper to do so because it's internal of socket.c.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240222095301.171137-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
With a clear definition of p->c protocol, where we only set it up if the
channel is fully established (TLS or non-TLS), registered_yank boolean will
have equal meaning of "p->c != NULL".
Drop registered_yank by checking p->c instead.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240222095301.171137-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit a1af605bd5 ("migration/multifd: fix hangup with TLS-Multifd due to
blocking handshake") introduced a thread for TLS channels, which will
resolve the issue on blocking the main thread. However in the same commit
p->c is slightly abused just to be able to pass over the pointer "p" into
the thread.
That's the major reason we'll need to conditionally free the io channel in
the fault paths.
To clean it up, using a separate structure to pass over both "p" and "tioc"
in the tls handshake thread. Then we can make it a rule that p->c will
never be set until the channel is completely setup. With that, we can drop
the tricky conditional unref of the io channel in the error path.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240222095301.171137-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now that multifd_recv_terminate_threads() is called only once, release
the recv side sem_sync earlier like we do for the send side.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Like we did on the sending side, replace the p->quit per-channel flag
with a global atomic 'exiting' flag.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The fd URI supports an fd that is backed by a file. The code should
select between QIOChannelFile and QIOChannelSocket, depending on the
type of the fd. Add a test for that.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Next patch adds another fd test. Rename the existing one closer to
what's used on other tests, with the 'precopy' prefix.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
When adding the support for file migration with the file: transport,
we missed adding documentation for it.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
* Add support for UART0, in preparation of AST2700 models
-----BEGIN PGP SIGNATURE-----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=gFeX
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu into staging
aspeed queue:
* Add support for UART0, in preparation of AST2700 models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmXd2nMACgkQUaNDx8/7
# 7KErPBAAjKRmJQF9aMEgf7uqsPnJojAVumFe63NE9Gqnvy4MzgoZWfdSnLl2Ddba
# im5IfR7MYv0tzJtqCVtz7o4JwXhhDwesWALQZBM/ms48aacPSNP+7Gn141yLuCCS
# Vr8NBSIz156lSsnFGnRUArcQTDKjDp/1TLRiGcS8SDm/S4Nn++nur+T054EZgbKR
# CMWDeavgzZRb9HPepvWDwqb9qs11hq5/onCqC886dVNznxEKAVYcd0FVbSn3OfDF
# 2EPvKh+fxHlW37wcctlGPnbJK5rRvFi78yZf5utSt+mlVhyiEXjQJ6p8zBIh2w5A
# NlsmUo/UYv1F41yC/vCFRR8KJ2wO5VW7zL6UCGMV6I9hxhu/Qw+FYqWdBbAZWsOO
# GFOkFbe8zbJFXTr/W7P5upBlA7U1/B9VbRj71eu01dqT+n8OGsk8yfnWVs1SjpoD
# 89ZIhpb7lSolQmjPPxrVyfUe3/8ncTx64+CZuAZjxPh/9HA8wDXwVRPtAbIvvGaZ
# YPQ4Qmd4m6nAANAvTg2ufj19WT64XKwrQ6O3IkmGcn0BzHl08GFjru8IUp6rbduG
# m6WqulL1Ej1PrYaiw5ktpJ4Fkoy6iEFXJOWfl3oTLp2KWE5VAohyRKI00AFnHiAC
# frK+cxT4bqDtJR8QbNyJy5d3ZGZV1R6ZA0XjQ1jtb8ty2qISysw=
# =gFeX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 27 Feb 2024 12:49:55 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu:
aspeed: fix hardcode boot address 0
aspeed: introduce a new UART0 device name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-42-sergey.kambalin@auriga.com
[PMM: list PCIE and GENET as 'missing' for now, until we land
the patches which add those devices]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our model of the bcm2835 mailbox is missing a few properties
that we need for the raspi4 kernel:
* RPI_FWREQ_GET_CLOCKS
* RPI_FWREQ_GET_THROTTLED
* RPI_FWREQ_VCHIQ_INIT
Add minimal implementations of them.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-40-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improved commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-31-sergey.kambalin@auriga.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Comment out use of USB, which depends on PCI]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds RPi4B device tree modifications:
- disable pcie, rng200, thermal sensor and genet devices
(they're going to be re-enabled in the following commits)
- create additional memory region in device tree
if RAM amount exceeds VC base address.
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-12-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-11-sergey.kambalin@auriga.com
[PMM: Change name to 'raspi4b', not 'raspi4b-2g']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pre-setup for raspberry pi 4 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-4-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pre setup for BCM2838 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-2-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that system reset uses a three-phase-reset, update the reset
documentation to include a section describing how this works.
Include documentation of the current major beartrap in reset, which
is that only devices on the qbus tree will get automatically reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-11-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Move the reset of the sysbus (and thus all devices and buses anywhere
on the qbus tree) from qemu_register_reset() to qemu_register_resettable().
This is a behaviour change: because qemu_register_resettable() is
aware of three-phase reset, this now means that:
* 'enter' phase reset methods of devices and buses are called
before any legacy reset callbacks registered with qemu_register_reset()
* 'exit' phase reset methods of devices and buses are called
after any legacy qemu_register_reset() callbacks
Put another way, a qemu_register_reset() callback is now correctly
ordered in the 'hold' phase along with any other 'hold' phase methods.
The motivation for doing this is that we will now be able to resolve
some reset-ordering issues using the three-phase mechanism, because
the 'exit' phase is always after the 'hold' phase, even when the
'hold' phase function was registered with qemu_register_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-10-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reimplement qemu_register_reset() via qemu_register_resettable().
We define a new LegacyReset object which implements Resettable and
defines its reset hold phase method to call a QEMUResetHandler
function. When qemu_register_reset() is called, we create a new
LegacyReset object and add it to the simulation_reset
ResettableContainer. When qemu_unregister_reset() is called, we find
the LegacyReset object in the container and remove it.
This implementation of qemu_unregister_reset() means we'll end up
scanning the ResetContainer's list of child objects twice, once
to find the LegacyReset object, and once in g_ptr_array_remove().
In theory we could avoid this by having the ResettableContainer
interface include a resettable_container_remove_with_equal_func()
that took a callback method so that we could use
g_ptr_array_find_with_equal_func() and g_ptr_array_remove_index().
But we don't expect qemu_unregister_reset() to be called frequently
or in hot paths, and we expect the simulation_reset container to
usually not have many children.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-9-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement new functions qemu_register_resettable() and
qemu_unregister_resettable(). These are intended to be
three-phase-reset aware equivalents of the old qemu_register_reset()
and qemu_unregister_reset(). Instead of passing in a function
pointer and opaque, you register any QOM object that implements the
Resettable interface.
The implementation is simple: we have a single global instance of a
ResettableContainer, which we reset in qemu_devices_reset(), and
the Resettable objects passed to qemu_register_resettable() are
added to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-8-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement a ResetContainer. This is a subclass of Object, and it
implements the Resettable interface. The container holds a list of
arbitrary other objects which implement Resettable, and when the
container is reset, all the objects it contains are also reset.
This will allow us to have a 3-phase-reset equivalent of the old
qemu_register_reset() API: we will have a single "simulation reset"
top level ResetContainer, and objects in it are the equivalent of the
old QEMUResetHandler functions.
The qemu_register_reset() API manages its list of callbacks using a
QTAILQ, but here we use a GPtrArray for our list of Resettable
children: we expect the "remove" operation (which will need to do an
iteration through the list) to be fairly uncommon, and we get simpler
code with fewer memory allocations.
Since there is currently no listed owner in MAINTAINERS for the
existing reset-related source files, create a new section for
them, and add these new files there also.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-7-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Add the usual boilerplate license/copyright comment to reset.h (using
the text from reset.c), and document the existing functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-6-peter.maydell@linaro.org
We have an OBJECT_DEFINE_TYPE_EXTENDED macro, plus several variations
on it, which emits the boilerplate for the TypeInfo and ensures it is
registered with the type system. However, all the existing macros
insist that the type being defined has its own FooClass struct, so
they aren't useful for the common case of a simple leaf class which
doesn't have any new methods or any other need for its own class
struct (that is, for the kind of type that OBJECT_DECLARE_SIMPLE_TYPE
declares).
Pull the actual implementation of OBJECT_DEFINE_TYPE_EXTENDED out
into a new DO_OBJECT_DEFINE_TYPE_EXTENDED which parameterizes the
value we use for the class_size field. This lets us add a new
OBJECT_DEFINE_SIMPLE_TYPE which does the same job as the various
existing OBJECT_DEFINE_*_TYPE_* family macros for this kind of simple
type, and the variant OBJECT_DEFINE_SIMPLE_TYPE_WITH_INTERFACES for
when the type will implement some interfaces.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240220160622.114437-5-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Currently the qemu_register_reset() API permits the reset handler functions
registered with it to remove themselves from within the callback function.
This is fine with our current implementation, but is a bit odd, because
generally reset is supposed to be idempotent, and doesn't fit well in a
three-phase-reset world where a resettable object will get multiple
callbacks as the system is reset.
We now have only one user of qemu_register_reset() which makes use of
the ability to unregister itself within the callback:
restore_boot_order(). We want to change our implementation of
qemu_register_reset() to something where it would be awkward to
maintain the "can self-unregister" feature. Rather than making that
reimplementation complicated, change restore_boot_order() so that it
doesn't unregister itself but instead returns doing nothing for any
calls after it has done the "restore the boot order" work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240220160622.114437-4-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
I'm far from confident this handling here is correct. Hence
RFC. In particular not sure on what locks I should hold for this
to be even moderately safe.
The function already appears to be inconsistent in what it returns
as the CONFIG_ATOMIC64 block returns the endian converted 'eventual'
value of the cmpxchg whereas the TCG_OVERSIZED_GUEST case returns
the previous value.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240219161229.11776-1-Jonathan.Cameron@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This property allows users to change flash model on command line as
below.
ex: "-M xlnx-versal-virt,ospi-flash=mt35xu02gbba"
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Message-id: 20240220091721.82954-3-sai.pavan.boddu@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Micro 2Gb OSPI flash part with sfdp data.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20240220091721.82954-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PL031 allows you to read RTCLR, which is meant to give you the last
value written. PL031State has an lr field which is used when reading
from RTCLR, and is present in the VM migration state, but we never
actually update it, so it always reads as its initial 0 value.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240222000341.1562443-1-jrtc27@jrtc27.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds a QTest that verifies each input line of a specific
EXTI OR gate can influence the output line.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240220184145.106107-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OSPI DMA reads flash data through the OSPI linear address space (the
iomem_dac region), because of this the reentrancy guard introduced in
commit a2e1753b ("memory: prevent dma-reentracy issues") is disabled for
the memory region.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Message-id: 20240219105637.65052-1-sai.pavan.boddu@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
