Mixed declarations do come in handy at the top of #ifdef blocks.
Reluctantly allow this particular usage and suggest an alternative.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com>
Message-Id: <11ac63e95d88551f1c2c9b1216b15d3cb8ba4468.1437346779.git.carlos.torres@rackspace.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrapper for strtoull() function. Include unit tests.
Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com>
Message-Id: <e0f0f611c9a81f3c29f451d0b17d755dfab1e90a.1437346779.git.carlos.torres@rackspace.com>
[Use uint64_t in prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrapper for strtoll() function. Include unit tests.
Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com>
Message-Id: <7454a6bb9ec03b629e8beb4f109dd30dc2c9804c.1437346779.git.carlos.torres@rackspace.com>
[Use int64_t in prototype, since that's what QEMU uses. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrapper for strtoul() function. Include unit tests.
Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com>
Message-Id: <9621b4ae8e35fded31c715c2ae2a98f904f07ad0.1437346779.git.carlos.torres@rackspace.com>
[Fix tests for 32-bit build. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrapper for strtol() function. Include unit tests.
Signed-off-by: Carlos L. Torres <carlos.torres@rackspace.com>
Message-Id: <07199f1c0ff3892790c6322123aee1e92f580550.1437346779.git.carlos.torres@rackspace.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
l1_map is based on physical addresses in full-system mode, as pointed
out in an earlier comment. Said comment also mentions that virtual
addresses are only used in l1_map in user-only mode.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-11-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were unlocking this lock after fork, which is wrong since
only the thread that holds a mutex is allowed to unlock it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-9-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using ccache with CCACHE_BASEDIR set to $(SRC_PATH) or a parent will
rewrite all absolute paths to relative paths. This interacts poorly with
QEMU's two-level build directory scheme. For example, lets say
BUILD_DIR=$(SRC_PATH)/build so build/blockdev.d will contain:
blockdev.o: ../blockdev.c ../include/sysemu/block-backend.h \
Now the target build under build/x86_64-softmmu or similar will depend
on ../blockdev.o which in turn will get make to source ../blockdev.d to
check its dependencies. Since make always considers paths relative to
the current working directory rather than the makefile the path appeared
in the relative path to ../blockdev.c is useless.
This change simply adds the top level build directory to vpath so paths
relative to the source directory, top build directory, and target build
directory all work just fine.
Signed-off-by: Michael Marineau <michael.marineau@coreos.com>
Message-Id: <1439103775-11836-1-git-send-email-michael.marineau@coreos.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439547914-18249-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signals are slow and do not exist on Win32. The previous patches
have done most of the legwork to introduce memory barriers (some
of them were even there already for the sake of Windows!) and
we can now set the flags directly in the iothread.
qemu_cpu_kick_thread is not used anymore on TCG, since the TCG thread is
never outside usermode while the CPU is running (not halted). Instead run
the content of the signal handler (now in qemu_cpu_kick_no_halt) directly.
qemu_cpu_kick_no_halt is also used in qemu_mutex_lock_iothread to avoid
the overhead of qemu_cond_broadcast.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the same API to trigger interruption of a CPU, no matter if
under TCG or KVM. There is no difference: these calls come from
the CPU thread, so the qemu_cpu_kick calls will send a signal
to the running thread and it will be processed synchronously,
just like a call to cpu_exit. The only difference is in the
overhead, but neither call to cpu_exit (now qemu_cpu_kick)
is in a hot path.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synchronize the remaining pair of accesses in cpu_signal. These should
be necessary on Windows as well, at least in theory. Probably
SuspendProcess and ResumeProcess introduce some implicit memory
barrier.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG has not been reading cpu->current_tb from signal handlers for years.
The code that synchronized cpu_exec with the signal handler is not
needed anymore.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TLS is now required on all platforms, so DECLARE_TLS/DEFINE_TLS is not
needed anymore. Removing it does not break Windows because of the
previous patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already useful on Windows in order to remove tls.h, because
accesses to current_cpu are done from a different thread on that
platform. It will be used on POSIX platforms as soon TCG stops using
signals to interrupt the execution of translated code.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is unused. cpu_exit now is almost exclusively an internal function
to the CPU execution loop. In a few patches, we'll change the remaining
occurrences to qemu_cpu_kick, making it truly internal.
Reviewed-by: Richard henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i8257 DMA controller uses an idle bottom half, which by default
does not cause the main loop to exit. Therefore, the DMA_schedule
function is there to ensure that the CPU relinquishes the iothread
mutex to the iothread.
However, this is not enough since the iothread will call
aio_compute_timeout() and go to sleep again. In the iothread
world, forcing execution of the idle bottom half is much simpler,
and only requires a call to qemu_notify_event(). Do it, removing
the need for the "cpu_request_exit" pseudo-irq. The next patch
will remove it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been reported that at least tgtd returns a block size of 0
for LUN 0. To avoid running into divide by zero later on and protect
against other problematic block sizes validate the block size right
at connection time.
Cc: qemu-stable@nongnu.org
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1439552016-8557-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iohandler.c shares the same interface with aio, but with duplicated
code. It's better to rebase iohandler, also because that aio is a
more friendly interface to multi-threads.
Create a global AioContext instance and let its GSource handle the
iohandler events.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1441596538-4412-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU starts the RCU thread executes qemu_mutex_lock_thread
causing error "qemu:qemu_cpu_kick_thread: No such process" and exits.
This isn't occur frequently but in glibc the thread id can exist and
this not guarantee that the thread is on active/running state. If is
inserted a sleep(1) after newthread assignment [1] the issue appears.
So not make assumption that thread exist if first_cpu->thread is set
then change the validation of cpu to created that is set into cpu
threads (kvm, tcg, dummy).
[1] https://sourceware.org/git/?p=glibc.git;a=blob;f=nptl/pthread_create.c;h=d10f4ea8004e1d8f3a268b95cc0f8d93b8d89867;hb=HEAD#l621
Cc: qemu-stable@nongnu.org
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Message-Id: <1441313313-3040-1-git-send-email-anibal.limon@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change we make sure that the compiler will not
optimise the read of the sequence number in any way.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-8-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-7-git-send-email-cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guest_base must be used only in linux-user mode.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1440757421-9674-1-git-send-email-laurent@vivier.eu
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a capitalization error in the OS X build instructions;
this was picked up in review of commit b352153f5f and intended to be
corrected before I applied it, but I accidentally didn't include it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-doc.texi: Add information on compiling source code on Mac OS X
Add information to the documentation on how to build QEMU
on Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed a minor capitalization error]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C7Zf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/weil/tags/pull-tci-20150826' into staging
tci patch queue
# gpg: Signature made Wed 26 Aug 2015 19:51:07 BST using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2 B78A E08C 21D5 6774 50AD
* remotes/weil/tags/pull-tci-20150826:
exec-all: Translate TCI return addresses backwards too
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This subtraction of return addresses applies directly to TCI as well as
host-TCG. This fixes Linux boots for at least Microblaze, CRIS, ARM and
SH4 when using TCI.
[sw: Removed indentation for preprocessor statement]
[sw: The patch also fixes Linux boot for x86_64]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The _cmp_bytes variable added by commit "bea60dd ui/vnc: fix potential
memory corruption issues" can become negative. Result is (possibly
exploitable) memory corruption. Reason for that is it uses the stride
instead of bytes per scanline to apply limits.
For the server surface is is actually fine. vnc creates that itself,
there is never any padding and thus scanline length always equals stride.
For the guest surface scanline length and stride are typically identical
too, but it doesn't has to be that way. So add and use a new variable
(guest_ll) for the guest scanline length. Also rename min_stride to
line_bytes to make more clear what it actually is. Finally sprinkle
in an assert() to make sure we never use a negative _cmp_bytes again.
Reported-by: 范祚至(库特) <zuozhi.fzz@alibaba-inc.com>
Reviewed-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the AArch64 TLBI operations which take an intermediate
physical address and invalidate stage 2 translations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-7-git-send-email-peter.maydell@linaro.org
Implement the remaining stage 1 TLB invalidate operations
visible from EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-6-git-send-email-peter.maydell@linaro.org
Implement the missing TLBI operations that exist only
if EL2 is implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-5-git-send-email-peter.maydell@linaro.org
Now we have the ability to flush the TLB only for specific MMU indexes,
update the AArch64 TLB maintenance instruction implementations to only
flush the parts of the TLB they need to, rather than doing full flushes.
We take the opportunity to remove some duplicate functions (the per-asid
tlb ops work like the non-per-asid ones because we don't support
flushing a TLB only by ASID) and to bring the function names in line
with the architectural TLBI operation names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-4-git-send-email-peter.maydell@linaro.org
Move the two regdefs for TLBI ALLE1 and TLBI ALLE1IS down so that the
whole set of AArch64 TLBI regdefs is arranged in numeric order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-3-git-send-email-peter.maydell@linaro.org
Guest CPU TLB maintenance operations may be sufficiently
specialized to only need to flush TLB entries corresponding
to a particular MMU index. Implement cputlb functions for
this, to avoid the inefficiency of flushing TLB entries
which we don't need to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-2-git-send-email-peter.maydell@linaro.org
Implement the AArch32 ATS1H* operations which perform
Hyp mode stage 1 translations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-6-git-send-email-peter.maydell@linaro.org
Apply the correct conditions in the ats_access() function for
the ATS12NSO* address translation operations:
* succeed at EL2 or EL3
* normal UNDEF trap from NS EL1
* trap to EL3 from S EL1 (only possible if EL3 is AArch64)
(This change means they're now available in our EL3-supporting
CPUs when they would previously always UNDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-5-git-send-email-peter.maydell@linaro.org
Some coprocessor register access functions need to be able
to report "trap to EL3 with an 'uncategorized' syndrome";
add the necessary CPAccessResult enum and handling for it.
I don't currently know of any registers that need to trap
to EL2 with the 'uncategorized' syndrome, but adding the
_EL2 enum as well is trivial and fills in what would
otherwise be an odd gap in the handling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-4-git-send-email-peter.maydell@linaro.org
Wire up the AArch64 EL2 and EL3 address translation operations
(AT S12E1*, AT S12E0*, AT S1E2*, AT S1E3*), and correct some
errors in the ats_write64() function in previously unused code
that would have done the wrong kind of lookup for accesses from
EL3 when SCR.NS==0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-3-git-send-email-peter.maydell@linaro.org
For EL2 stage 1 translations, there is no TTBR1. We were already
handling this for 64-bit EL2; add the code to take the 'no TTBR1'
code path for 64-bit EL2 as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-2-git-send-email-peter.maydell@linaro.org
We already implemented ACTLR_EL1; add the missing ACTLR_EL2 and
ACTLR_EL3, for consistency.
Since we don't currently have any CPUs that need the EL2/EL3
versions to reset to non-zero values, implement as RAZ/WI.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-5-git-send-email-peter.maydell@linaro.org
The AFSR registers are implementation dependent auxiliary fault
status registers. We already implemented a RAZ/WI AFSR0_EL1 and
AFSR_EL1; add the missing AFSR{0,1}_EL{2,3} for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-4-git-send-email-peter.maydell@linaro.org
The AMAIR registers are for providing auxiliary implementation
defined memory attributes. We already implemented a RAZ/WI
AMAIR_EL1; add the EL2 and EL3 versions for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-3-git-send-email-peter.maydell@linaro.org
Paolo Bonzini
Carlos L. Torres
Emilio G. Cota
Michael Marineau
Dr. David Alan Gilbert
Andrey Smetanin
Peter Lieven
Fam Zheng
Aníbal Limón
Laurent Vivier
Peter Maydell
G 3
Peter Crosthwaite
Gerd Hoffmann