This patch switches to initialize dev.nvqs from the VhostNetOptions
instead of assuming it was 2. This is useful for implementing control
virtqueue support which will be a single vhost_net structure with a
single cvq.
Note that nvqs is still set to 2 for all users and this patch does not
change functionality.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Switch to use unsigned int for nvqs since it's not expected to be
negative.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The nvqs and vqs have been initialized during vhost_net_init() and are
not expected to change during the life cycle of vhost_net
structure. So this patch removes the meaningless assignment.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should return error code instead of zero, otherwise there's no way
for the caller to detect the failure.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"acked_features" is unused, let's remove that.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a typo in the help message printed by vhost-user-bridge.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210901152713.25701-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user-bridge binary accepts a UNIX socket path on
the command line. Sanity check that this is short enough to
fit into a sockaddr_un before copying it in.
Fixes: Coverity CID 1432866
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210901152632.25511-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Qemu will crash on vhost backend unexpected exit and re-connect │
in some case due to access released memory.
Signed-off-by: Yuwei Zhang <zhangyuwei.9149@bytedance.com>
Message-Id: <20210830123433.45727-1-zhangyuwei.9149@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_free_region_cache() is called within call_rcu(),
always with a non-NULL argument. Ensure new code keep it
that way by replacing the NULL check by an assertion.
Add a comment this function is called within call_rcu().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210826172658.2116840-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
While virtio_queue_packed_empty_rcu() uses the '_rcu' suffix,
it is not obvious it is called within rcu_read_lock(). All other
functions from this file called with the RCU locked have a comment
describing it. Document this one similarly for consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210826172658.2116840-2-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
I have developed an interest in this space and hopefully can lend some
helping hand to Igor and Michael in reviewing simpler patches.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210825031949.919376-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no need to use fresh typecasts to get references to pci device structs
when there is an existing reference to pci device struct. Use existing reference.
Minor cleanup.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210825031949.919376-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit c0e427d6eb ("hw/acpi/ich9: Enable ACPI PCI hot-plug") removed all
uses of find_i440fx() function. This has been replaced by the more generic call
acpi_get_i386_pci_host() which maybe able to find the root bus both for i440fx
machine type as well as for the q35 machine type. There seems to be no more any
need to maintain a i440fx specific version of the api call. Remove it.
Tested by building from a clean tree successfully.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210825031949.919376-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commits aa57020774 ("numa: move numa global variable
nb_numa_nodes into MachineState") and 7e721e7b10 ("numa: move
numa global variable numa_info into MachineState"), we can get
NUMA information completely from MachineState::numa_state.
Remove PCMachineState::numa_nodes and PCMachineState::node_mem,
since they are just copied from MachineState::numa_state.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20210823011254.28506-1-jingqi.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost used to compare the dma_as against the address_space_memory to
detect whether the IOMMU is enabled or not. This might not work well
since the virito-bus may call get_dma_as if VIRTIO_F_IOMMU_PLATFORM is
set without an actual IOMMU enabled when device is plugged. In the
case of PCI where pci_get_address_space() is used, the bus master as
is returned. So vhost actually tries to enable device IOTLB even if
the IOMMU is not enabled. This will lead a lots of unnecessary
transactions between vhost and Qemu and will introduce a huge drop of
the performance.
For PCI, an ideal approach is to use pci_device_iommu_address_space()
just for get_dma_as. But Qemu may choose to initialize the IOMMU after
the virtio-pci which lead a wrong address space is returned during
device plugged. So this patch switch to use transport specific way via
iommu_enabled() to detect the IOMMU during vhost start. In this case,
we are fine since we know the IOMMU is initialized correctly.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210804034803.1644-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements the PCI transport version of iommu_enabled. This
is done by comparing the address space returned by
pci_device_iommu_address_space() against address_space_memory.
Note that an ideal approach is to use pci_device_iommu_address_space()
in get_dma_as(), but it might not work well since the IOMMU could be
initialized after the virtio-pci device is initialized.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210804034803.1644-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce a new method for the virtio-bus for the transport
to report whether or not the IOMMU is enabled for the device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210804034803.1644-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's compress the code a bit to improve readability. We can drop the
vm_running check in virtio_balloon_free_page_start() as it's already
properly checked in the single caller.
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210708095339.20274-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Postcopy never worked properly with 'free-page-hint=on', as there are
at least two issues:
1) With postcopy, the guest will never receive a VIRTIO_BALLOON_CMD_ID_DONE
and consequently won't release free pages back to the OS once
migration finishes.
The issue is that for postcopy, we won't do a final bitmap sync while
the guest is stopped on the source and
virtio_balloon_free_page_hint_notify() will only call
virtio_balloon_free_page_done() on the source during
PRECOPY_NOTIFY_CLEANUP, after the VM state was already migrated to
the destination.
2) Once the VM touches a page on the destination that has been excluded
from migration on the source via qemu_guest_free_page_hint() while
postcopy is active, that thread will stall until postcopy finishes
and all threads are woken up. (with older Linux kernels that won't
retry faults when woken up via userfaultfd, we might actually get a
SEGFAULT)
The issue is that the source will refuse to migrate any pages that
are not marked as dirty in the dirty bmap -- for example, because the
page might just have been sent. Consequently, the faulting thread will
stall, waiting for the page to be migrated -- which could take quite
a while and result in guest OS issues.
While we could fix 1) comparatively easily, 2) is harder to get right and
might require more involved RAM migration changes on source and destination
[1].
As it never worked properly, let's not start free page hinting in the
precopy notifier if the postcopy migration capability was enabled to fix
it easily. Capabilities cannot be enabled once migration is already
running.
Note 1: in the future we might either adjust migration code on the source
to track pages that have actually been sent or adjust
migration code on source and destination to eventually send
pages multiple times from the source and and deal with pages
that are sent multiple times on the destination.
Note 2: virtio-mem has similar issues, however, access to "unplugged"
memory by the guest is very rare and we would have to be very
lucky for it to happen during migration. The spec states
"The driver SHOULD NOT read from unplugged memory blocks ..."
and "The driver MUST NOT write to unplugged memory blocks".
virtio-mem will move away from virtio_balloon_free_page_done()
soon and handle this case explicitly on the destination.
[1] https://lkml.kernel.org/r/e79fd18c-aa62-c1d8-c7f3-ba3fc2c25fc8@redhat.com
Fixes: c13c4153f7 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210708095339.20274-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
OBJECT_CHECK(PciHostState, ..., TYPE_PCI_HOST_BRIDGE) is exactly
what the PCI_HOST_BRIDGE macro does. We can just use the macro
instead of using OBJECT_CHECK manually.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210805193431.307761-7-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The macro never worked and never will, because the
AcpiGedX86State type never existed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210805193431.307761-2-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This would previously give error messages like
> Received unexpected msg type.Expected 0 received 1
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Message-Id: <20210806143926.315725-1-hi@alyssa.is>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just a small refactor patch.
vhost_set_backend_type() gets called only in vhost.c, so we can move the
function there and make it static. We can then extern the visibility of
kernel_ops, to match the other VhostOps in vhost-backend.h.
The VhostOps constants now make more sense in vhost.h
Suggested-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Tiberiu Georgescu <tiberiu.georgescu@nutanix.com>
Message-Id: <20210809134015.67941-1-tiberiu.georgescu@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci
hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on.
This brings in support for whole lot of subsystems that some targets like
mips does not need. They are added just to satisfy symbol dependencies. This
is ugly and should be avoided. Targets should be able to pull in just what they
need and no more. For example, mips only needs support for PIIX4 and does not
need acpi pci hotplug support or cpu hotplug support or memory hotplug support
etc. This change is an effort to clean this up.
In this change, new config variables are added for various acpi hotplug
subsystems. Targets like mips can only enable PIIX4 support and not the rest
of all the other modules which were being previously pulled in as a part of
CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but
are not required by mips (for example, symbols specific to pci hotplug etc)
are available to satisfy the dependencies.
Currently, this change only addresses issues with mips malta targets. In future
we might be able to clean up other targets which are similarly pulling in lot
of unnecessary hotplug modules by enabling ACPI_X86.
This change should also address issues such as the following:
https://gitlab.com/qemu-project/qemu/-/issues/221https://gitlab.com/qemu-project/qemu/-/issues/193
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210812071409.492299-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Related: https://bugzilla.redhat.com//show_bug.cgi?id=1985924
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210812102341.3316254-1-kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being
used for both q35 and i440fx machine types, it is better that we defined this
property string at a single place within a header file like other PIIX4
properties. We can then use this single definition at all the places that needs
it instead of duplicating the string everywhere. While at it, this change also
adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses
this definition at all places that were formally using the string value.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210816083214.105740-1-ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On vhost-user-blk migration, qemu normally sends a number of commands
to enable logging if VHOST_USER_PROTOCOL_F_LOG_SHMFD is negotiated.
Qemu sends VHOST_USER_SET_FEATURES to enable buffers logging and
VHOST_USER_SET_VRING_ADDR per each started ring to enable "used ring"
data logging.
The issue is that qemu doesn't wait for reply from the vhost daemon
for these commands which may result in races between qemu expectation
of logging starting and actual login starting in vhost daemon.
The race can appear as follows: on migration setup, qemu enables dirty page
logging by sending VHOST_USER_SET_FEATURES. The command doesn't arrive to a
vhost-user-blk daemon immediately and the daemon needs some time to turn the
logging on internally. If qemu doesn't wait for reply, after sending the
command, qemu may start migrateing memory pages to a destination. At this time,
the logging may not be actually turned on in the daemon but some guest pages,
which the daemon is about to write to, may have already been transferred
without logging to the destination. Since the logging wasn't turned on,
those pages won't be transferred again as dirty. So we may end up with
corrupted data on the destination.
The same scenario is applicable for "used ring" data logging, which is
turned on with VHOST_USER_SET_VRING_ADDR command.
To resolve this issue, this patch makes qemu wait for the command result
explicitly if VHOST_USER_PROTOCOL_F_REPLY_ACK is negotiated and logging enabled.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210809104824.78830-1-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If call virtio_queue_set_host_notifier_mr fails, should free
host-notifier memory-region.
Fixes: 44866521bd ("vhost-user: support registering external host notifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Message-Id: <1629077555-19907-1-git-send-email-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the introduction of the batch hinting, meaningless batches can be
created with no IOTLB updates if the memory region was skipped by
vhost_vdpa_listener_skipped_section. This is the case of host notifiers
memory regions, device un/realize, and others. This causes the vdpa
device to receive dma mapping settings with no changes, a possibly
expensive operation for nothing.
To avoid that, VHOST_IOTLB_BATCH_BEGIN hint is delayed until we have a
meaningful (not skipped section) mapping or unmapping operation, and
VHOST_IOTLB_BATCH_END is not written unless at least one of _UPDATE /
_INVALIDATE has been issued.
v3:
* Use a bool instead of a counter avoiding potential number wrapping
* Fix bad check on _commit
* Move VHOST_BACKEND_F_IOTLB_BATCH check to
vhost_vdpa_iotlb_batch_begin_once
v2 (from RFC):
* Rename misleading name
* Abstract start batching function for listener_add/del
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210812140933.226288-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ec6M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/a1xndr/tags/fuzz-pull-2021-09-01' into staging
Fuzzing Patches for 2021-09-01
# gpg: Signature made Wed 01 Sep 2021 12:42:00 BST
# gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E
* remotes/a1xndr/tags/fuzz-pull-2021-09-01:
MAINTAINERS: add fuzzing reviewer
MAINTAINERS: Add myself as a reviewer for Device Fuzzing
fuzz: unblock SIGALRM so the timeout works
fuzz: use ITIMER_REAL for timeouts
fuzz: add an instrumentation filter
fuzz: make object-name matching case-insensitive
fuzz: adjust timeout to allow for longer inputs
fuzz: fix sparse memory access in the DMA callback
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
-----BEGIN PGP SIGNATURE-----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=0tJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz/tags/pull-block-2021-09-01' into staging
Block patches:
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
# gpg: Signature made Wed 01 Sep 2021 16:01:54 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz/tags/pull-block-2021-09-01: (56 commits)
block/file-win32: add reopen handlers
block/export/fuse.c: fix fuse-lseek on uclibc or musl
block/block-copy: block_copy_state_new(): drop extra arguments
iotests/image-fleecing: add test-case for copy-before-write filter
iotests/image-fleecing: prepare for adding new test-case
iotests/image-fleecing: rename tgt_node
iotests/image-fleecing: proper source device
iotests.py: hmp_qemu_io: support qdev
iotests: move 222 to tests/image-fleecing
iotests/222: constantly use single quotes for strings
iotests/222: fix pylint and mypy complains
python:QEMUMachine: template typing for self returning methods
python/qemu/machine: QEMUMachine: improve qmp() method
python/qemu/machine.py: refactor _qemu_args()
qapi: publish copy-before-write filter
block/copy-before-write: make public block driver
block/block-copy: make setting progress optional
block/copy-before-write: initialize block-copy bitmap
block/copy-before-write: cbw_init(): use options
block/copy-before-write: bdrv_cbw_append(): drop unused compress arg
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v9fs_walk() utilizes the v9fs_co_run_in_worker({...}) macro to run the
supplied fs driver code block on a background worker thread.
When either the 'Twalk' client request was interrupted or if the client
requested fid for that 'Twalk' request caused a stat error then that
fs driver code block was left by 'break' keyword, with the intention to
return from worker thread back to main thread as well:
v9fs_co_run_in_worker({
if (v9fs_request_cancelled(pdu)) {
err = -EINTR;
break;
}
err = s->ops->lstat(&s->ctx, &dpath, &fidst);
if (err < 0) {
err = -errno;
break;
}
...
});
However that 'break;' statement also skipped the v9fs_co_run_in_worker()
macro's final and mandatory
/* re-enter back to qemu thread */
qemu_coroutine_yield();
call and thus caused the rest of v9fs_walk() to be continued being
executed on the worker thread instead of main thread, eventually
leading to a crash in the transport virtio transport driver.
To fix this issue and to prevent the same error from happening again by
other users of v9fs_co_run_in_worker() in future, auto wrap the supplied
code block into its own
do { } while (0);
loop inside the 'v9fs_co_run_in_worker' macro definition.
Full discussion and backtrace:
https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg05209.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2021-09/msg00174.html
Fixes: 8d6cb10073
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mLTBg-0002Bh-2D@lizzy.crudebyte.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <b51670d2a39399535a035f6bc77c3cbeed85edae.1629208359.git.qemu_oss@crudebyte.com>
The v9fs_walk() function resolves all client submitted path nodes to the
local 'pathes' array. Using a separate string scalar variable 'path'
inside the background worker thread loop and copying that local 'path'
string scalar variable subsequently to the 'pathes' array (at the end of
each loop iteration) is not necessary.
Instead simply resolve each path directly to the 'pathes' array and
don't use the string scalar variable 'path' inside the fs worker thread
loop at all.
The only advantage of the 'path' scalar was that in case of an error
the respective 'pathes' element would not be filled. Right now this is
not an issue as the v9fs_walk() function returns as soon as any error
occurs.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <7dacbecf25b2c9b4a0ce12d689a8a535f09a31e3.1629208359.git.qemu_oss@crudebyte.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmEvbmcACgkQda1lgCoL
QhEmtggAgWR8p/4awhUoTscEkLBoilxJATTZBkxbN8NrRYmOIIn29QShhEDhvuG9
t6ch0DrJuSVMISTnMHtE5XJKBBD8vFS04SaD4Op8NgOyKTd2fQSXx6SyqgQVK0ui
zfZFjcjam9i+onIGVCSoUkGRL5GMOTougTh4SwMndR9sL9cn7lUQEJZbk7kS1II6
5r6uvKPtY4fyvxsi0wcHOYFSeajJfQOVZkav7JCnvuXiiCjQzZw2Aadsvrkmt3Y4
oaOTiOvYWJhNqFhWSuyY7gS4E4fjShwr3UuOcsmKUTu56Uf2GgdA9w4+AfZJQSxG
C1Vi+u5J8+oZzVHna9T1lRKQ5wLfCA==
=IprO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2021-09-01-1' into staging
Merge tpm 2021/09/01 v1
# gpg: Signature made Wed 01 Sep 2021 13:13:27 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2021-09-01-1:
tests: acpi: tpm1.2: Add expected TPM 1.2 ACPI blobs
tests: acpi: Add test cases for TPM 1.2 with TCPA table
tests: Use QMP to check whether a TPM device model is available
tests: acpi: prepare for new TPM 1.2 related tables
tests: tpm: Create TPM 1.2 response in TPM emulator
tests: acpi: tpm2: Add the renamed ACPI files and drop old ones
tests: Add suffix 'tpm2' or 'tpm12' to ACPI table files
tests: acpi: Prepare for renaming of TPM2 related ACPI files
tests: Add tpm_version field to TPMTestState and fill it
tests: Rename TestState to TPMTestState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make 'qemu-img commit' work on Windows.
Command 'commit' requires reopening backing file in RW mode. So,
add reopen prepare/commit/abort handlers and change dwShareMode
for CreateFile call in order to allow further read/write reopening.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/418
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Tested-by: Helge Konetzka <hk@zapateado.de>
Message-Id: <20210825173625.19415-1-viktor.prutyanov@phystech.edu>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Include linux/fs.h to avoid the following build failure on uclibc or
musl raised since version 6.0.0:
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:641:19: error: 'SEEK_HOLE' undeclared (first use in this function)
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
../block/export/fuse.c:641:19: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c:641:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
| SEEK_SET
Fixes:
- http://autobuild.buildroot.org/results/33c90ebf04997f4d3557cfa66abc9cf9a3076137
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20210827220301.272887-1-fontaine.fabrice@gmail.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The only caller pass copy_range and compress both false. Let's just
drop these arguments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-35-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
New fleecing method becomes available: copy-before-write filter.
Actually we don't need backup job to setup image fleecing. Add test
for new recommended way of image fleecing.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-34-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to add a test-case with some behavior modifications. So,
let's prepare a function to be reused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-33-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Actually target of backup(sync=None) is not a final backup target:
image fleecing is intended to be used with external tool, which will
copy data from fleecing node to some real backup target.
Also, we are going to add a test case for "push backup with fleecing",
where instead of exporting fleecing node by NBD, we'll start a backup
job from fleecing node to real backup target.
To avoid confusion, let's rename temporary fleecing node now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-32-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Define scsi device to operate with it by qom-set in further patch.
Give a new node-name to source block node, to not look like device
name.
Job now don't want to work without giving explicit id, so, let's call
it "fleecing".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-31-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20210824083856.17408-30-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Give a good name to test file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-29-vsementsov@virtuozzo.com>
[hreitz: Adjust .gitlab-ci.d/buildtest.yml]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The file use both single and double quotes for strings. Let's be
consistent.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-28-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Here:
- long line
- move to new interface of vm.qmp() (direct passing dict), to avoid
mypy false-positive, as it thinks that unpacked dict is a positional
argument.
- extra parenthesis
- handle event_wait possible None value
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-27-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
mypy thinks that return value of these methods in subclusses is
QEMUMachine, which is wrong. So, make typing smarter.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-26-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
