No test case actually uses the audio backend. Disable audio to prevent
warnings on hosts with no sound hardware present:
GTESTER check-qtest-aarch64
sdl: SDL_OpenAudio failed
sdl: Reason: No available audio device
sdl: SDL_OpenAudio failed
sdl: Reason: No available audio device
audio: Failed to create voice `lm4549.out'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The function fopen() may fail, so check its return value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Liu <john.liuli@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing a real in-use protocol such as NBD is hard; testing blkdebug and
blkverify in its stead is easier and tests basically the same
functionality.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
This test runs dummy function with coroutine by using
two enter and one yield since which is a common usage.
So we can see the cost introduced by corouting for running
one function, for example:
Run operation 20000000 iterations 4.841071 s, 4131K operations/s
242ns per coroutine
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test which tests various combinations of qcow2's cache options
(some of which are valid, some of which are not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a program under test get frozen, the test should finish and report about its
failure.
In such cases the runner waits for 10 minutes until the program ends its
execution. After this time-out the program will be terminated and the test will
be marked as failed.
For current limitation of test image size to 10 MB as a maximum an execution of
each command takes about several seconds in general, so 10 minutes is enough to
discriminate freeze, but not drastically increase an overall test duration.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the specified duration the runner stops executing new tests, but it
doesn't interrupt running ones.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some issues can be found only when a fuzzed image has a partial structure,
e.g. has L1/L2 tables but no refcount ones. Generation of an entirely
defined image limits these cases. Now the Image constructor creates only
a header and a backing file name (if any), other image elements are generated
in the 'create_image' API.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Entries in L1/L2 entries are based on a portion of random guest clusters.
L2 entries contain offsets to host image clusters filled with random data.
Clusters for L1/L2 tables and guest data are selected randomly.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
__init__.py provides the public API required by the test runner
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The layout submodule of the qcow2 package creates a random valid image,
randomly selects some amount of its fields, fuzzes them and write the fuzzed
image to the file. Fuzzing process can be controlled by an external
configuration.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The fuzz submodule of the qcow2 image generator contains fuzzing functions for
image fields.
Each fuzzing function contains a list of constraints and a call of a helper
function that randomly selects a fuzzed value satisfied to one of constraints.
For now constraints include only known as invalid or potentially dangerous
values. But after investigation of code coverage by fuzz tests they will be
expanded by heuristic values based on inner checks and flows of a program
under test.
Now fuzzing of a header, header extensions and a backing file name is
supported.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The purpose of the test runner is to prepare the test environment (e.g. create
a work directory, a test image, etc), execute a program under test with
parameters, indicate a test failure if the program was killed during the test
execution and collect core dumps, logs and other test artifacts.
The test runner doesn't depend on an image format, so it can be used with any
external image generator.
[Fixed path to qcow2 format module "qcow2" instead of "../qcow2" since
runner.py is no longer in a sub-directory.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For libqos debugging purposes, it's nice to
be able to assert that tests and associated libraries
have no memory leaks. To that end, free up the
trivial cmdline leak.
The remaining leaks caused by pc_alloc_init are fixed
instead by my first-fit pc_alloc implementation already
on the qemu-devel mailing list.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch allows qpci_iomap to return the size of the
BAR mapping that it created, to allow driver applications
(e.g, ahci-test) to make determinations about the suitability
or the mapping size, or in the specific case of AHCI, how
many ports are supported by the HBA.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow users the chance to clean up the QPCIBusPC structure
by adding a small cleanup routine. Helps clear up small
memory leaks during setup/teardown, to allow for cleaner
debug output messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes a small memory leak inside of libqtest.
After we produce a test path and glib copies the string
for itself, we should clean up our temporary copy.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix a small memory leak inside of libqos, in the pc_alloc_init routine.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, libqtest allows for memread and memwrite, but
does not offer a simple way to zero out regions of memory.
This patch adds a simple function to do so.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJT7gYeAAoJEH8JsnLIjy/WWhoQAIcD8jfk/pl5tFXpayMLzDis
ihaqYc9IJV29L+cIF0YFAclLkCKrmfJg49vhxomIq2WxxAZ9qX6lfi2V602qg51e
wzxLcTA1eq15w1yTGDORPMStP8lAsxbMhd+37s33teMxukvLsEfiT0Tbd9GbfzYk
jmQ4QYjw8nd/C1NEzR4TTcHmwXvbP0TjGTDhbcBzChB71zxe5q827y2J+I/ki+0A
4MBvf6OCMSAbY5sQo01csXxNABkM/fw9BmNgml8G2a24eFRWg9VU4WuBYVlVys0S
ZZAcc2KiUNs1Zp7SxrTpI8hR0+SsuabVMvAdW8oct/6BRaR4t6toIsoQs1qQuHRD
l18ErqulJpCTP+eMbGNgXKAAYvmb9ylQGOX+mnz9fnNXF3dyLyu77fFtL3FxXedE
KkcQyfFf1l5ENMw/DArzjqwdrHJgm9kcOE2lyAmbq2+Ad6kJqVTTWNR6hojIRx7G
lo2Rn+VLpjnmX8XNTiQokNeMsqKbTAF2M8KwEyYNPEz6WkpRTVWJcy3Cp4fDF65L
TaYsB7M1b30D7CFAZTBx76MLQirhzNq1XxJZlMafXSymfDryZVMrMWSjmlb2bmlX
Fer7iFWpfA8BHI46sZ0NqoGcljKr811dTxAqvsoek5lP6Kn+xnSqjeHSRzqNUl4l
EfQW7ZR1vlRoKtrGqNBQ
=5w3j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 15 Aug 2014 14:07:42 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (59 commits)
block: Catch !bs->drv in bdrv_check()
iotests: Add test for image header overlap
qcow2: Catch !*host_offset for data allocation
qcow2: Return useful error code in refcount_init()
mirror: Handle failure for potentially large allocations
vpc: Handle failure for potentially large allocations
vmdk: Handle failure for potentially large allocations
vhdx: Handle failure for potentially large allocations
vdi: Handle failure for potentially large allocations
rbd: Handle failure for potentially large allocations
raw-win32: Handle failure for potentially large allocations
raw-posix: Handle failure for potentially large allocations
qed: Handle failure for potentially large allocations
qcow2: Handle failure for potentially large allocations
qcow1: Handle failure for potentially large allocations
parallels: Handle failure for potentially large allocations
nfs: Handle failure for potentially large allocations
iscsi: Handle failure for potentially large allocations
dmg: Handle failure for potentially large allocations
curl: Handle failure for potentially large allocations
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test for an image with an unallocated image header; instead of an
assertion, this should result in the image being marked corrupt.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This updates the VDI corruption test to also test static VDI image
creation, as well as the default dynamic image creation.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This can be used to compute the cost of coroutine operations. In the
end the cost of the function call is a few clock cycles, so it's pretty
cheap for now, but it may become more relevant as the coroutine code
is optimized.
For example, here are the results on my machine:
Function call 100000000 iterations: 0.173884 s
Yield 100000000 iterations: 8.445064 s
Lifecycle 1000000 iterations: 0.098445 s
Nesting 10000 iterations of 1000 depth each: 7.406431 s
One yield takes 83 nanoseconds, one enter takes 97 nanoseconds,
one coroutine allocation takes (roughly, since some of the allocations
in the nesting test do hit the pool) 739 nanoseconds:
(8.445064 - 0.173884) * 10^9 / 100000000 = 82.7
(0.098445 * 100 - 0.173884) * 10^9 / 100000000 = 96.7
(7.406431 * 10 - 0.173884) * 10^9 / 100000000 = 738.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that we diverge from the specification with our
implementation. Having a reference image in the test cases may detect
such problems when we introduce a bug that can read what it creates, but
can't handle a real VMDK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These three objects are repeated in multiple times in Makefiles. Let's
just add them to libqemuutil.a, and don't list explicitly elsewhere.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
My version of IASL (from RHEL7) puts two newlines between the head comment
and the DefinitionBlock property. Kill all newlines after the comment,
so that normalize_asl works properly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This replaces the _PRT constant with a method that computes it.
The problem is that the DSDT+SSDT have grown from 2.0 to 2.1,
enough to cross the 8k barrier (we align the ACPI tables to 4k
before putting them in fw_cfg). This causes problems with
migration and the pc-i440fx-2.0 machine type.
The solution to the problem is to hardcode 64k as the limit,
but this doesn't solve the bug with pc-i440fx-2.0. The fix will be
for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the
ACPI tables. First, however, we must make the actual AML
equal or smaller; to do this, rewrite _PRT in a way that saves
over 1k of bytecode.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
new qtest. Michael sent a pull request of his own, so I dropped
the vhost changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4qtI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Andreas's fixes to --enable-modules, two 2.1 regression fixes, and a
new qtest. Michael sent a pull request of his own, so I dropped
the vhost changes.
# gpg: Signature made Fri 18 Jul 2014 14:30:34 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
* remotes/bonzini/tags/for-upstream:
Revert "kvmclock: Ensure time in migration never goes backward"
Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation"
module: Don't complain when a module is absent
module: Simplify module_load()
qtest: new test for wdt_ib700
target-i386: Allow execute from user mode when SMEP is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Smatch also complains about 0 used for pointers, so replace those by
NULL in test-visitor-serialization.c, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the "pause" watchdog action had a regression and it went
unnoticed for a while, let's add a test for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued. Unfortunately it is very
hard to filter out the path due to readline's character-by-character
output (with terminal escape sequences). Just redirect this command to
/dev/null for now.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTyF+IAAoJECgfDbjSjVRpB/AIAJUJLrdwwkZQymAb62e0Xe4L
EYXhWr6R3J/yipgm7oko8e95fR7R40cUNrUHeH4w34Gp3vTMWyIxflYbyvSpd6KG
jQDZEwJG1oIGRU6cL72cN8QuF6XUXk8QPSN6kfWL0OgxeS7hP6KgL/wJRuzDOCm9
jsK3mE4+acFvGMKw36q0SCYJJFUxOrXj78vo1T5szizX1OKidMuQkByL96XNV3VQ
X5RlP7IRpSyQ1JM9n97gwywjaCM/7SlgdO3YRKzGdClFWNgZ8XqO4K6Loi8x2RWC
LrzID/i36M7veAoHAIvgs7AcUKbCyFoDYpL3mdAZB0y/XNIzKecIqrMm9IMtBLM=
=AoMw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,vhost,test fixes
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jul 2014 00:43:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost-user: minor cleanups
qtest: Adapt vhost-user-test to latest vhost-user changes
vhost-user: Fix VHOST_SET_MEM_TABLE processing
qtest: fix vhost-user-test compilation with old GLib
fix typo: apci -> acpi
pc_piix: Reuse pc_compat_1_2() for pc-0.1[0123]
pc: fix qemu exiting with error when -m X < 128 with old machines types
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A new field mmap_offset was added in the vhost-user message, we need to reflect
this change in the test too.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-test uses the linux/vhost.h header, so it must only be
enabled if CONFIG_LINUX is defined. (Previously it was enabled
for CONFIG_POSIX, which broke 'make check' on MacOSX.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The libqos implementation of io_read{b,w,l} and io_write{b,w,l} hooks
was relying on qtest_mem{read,write}() respectively. With d81d410 (usb:
improve ehci/uhci test) this resulted in assertion failures on ppc hosts:
ERROR:tests/usb-hcd-ehci-test.c:78:ehci_port_test: assertion failed: ((value & mask) == (expect & mask))
ERROR:tests/usb-hcd-ehci-test.c:128:pci_uhci_port_2: assertion failed: (pcibus != NULL)
ERROR:tests/usb-hcd-ehci-test.c:150:pci_ehci_port_2: assertion failed: (pcibus != NULL)
qtest_read{b,w,l,q}() and qtest_write{b,w,l,q}() had been introduced
as endian-safe replacement for qtest_mem{read,write}() in I2C in
872536b (qtest: Add MMIO support). Use them for PCI as well.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: c4efe1c qtest: add libqos including PCI support
Fixes: d81d410 usb: improve ehci/uhci test
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mising G_TIME_SPAN_SECOND definition breaks the RHEL6 compilation as GLib
version before 2.26 does not have it. In such case just define it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The buffer was being allocated of size string length plus two.
Around the string two quotes were being added, but no terminating NUL.
It was then compared using g_assert_cmpstr(), resulting in fairly random
assertion failures:
ERROR:tests/test-string-output-visitor.c:213:test_visitor_out_enum: assertion failed (str == str_human): ("\"value1\"" == "\"value1\"\001EEEEEEEEEEEEEE\0171")
There is no g_assert_cmpnstr() counterpart, so use g_strdup_printf()
for safely assembling the string in the first place.
Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Fixes: b4900c0 tests: add human format test for string output visitor
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
