This patch refactors the way the CPU state is handled that is associated
with a TB. The basic motivation is to move more arch specific code out
of generic files. Specifically the long #ifdef clutter in tb_find_fast()
has to be overcome in order to avoid duplicating it for the gdb
watchpoint fixes (patch "Restore pc on watchpoint hits").
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5736 c046a42c-6fe2-441c-8c8c-71466251a162
as macros should be avoided when possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5735 c046a42c-6fe2-441c-8c8c-71466251a162
KVM keeps track of physical memory based on slots in the kernel. The current
code that translates QEMU memory mappings to slots work but is not robust
in the fact of reregistering partial regions of memory.
This patch does the right thing for reregistering partial regions of memory. It
also prevents QEMU from using KVM private slots.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5734 c046a42c-6fe2-441c-8c8c-71466251a162
when compiling on NetBSD:
warning: array subscript has type 'char'
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162
Set t0 to 0 for unimplemented mfc0/dmfc0 instructions. This fixes a tcg
internal error while booting mips linux.
Noticed by Julia Longtin.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5723 c046a42c-6fe2-441c-8c8c-71466251a162
This patch implemented the setxuid and setxgid syscalls for Alpha.
These syscalls return two values, both uid/euid and gid/egid.
In addition to returning the first value in $v0, the additional
value is returned in the $a4 register.
The syscalls are used instead of the separate syscalls for those values
used on other architectures (this is probably because Alpha Linux started
out syscall compatible with DEC/OSF/Tru64).
With this patch, the perlbmk benchmarks from Spec2000 run properly.
(Vince Weaver)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5722 c046a42c-6fe2-441c-8c8c-71466251a162
Replace POWERPC_EXCP_DEBUG by EXCP_DEBUG as the former can not happen in
user mode emulation, while the later can happen and should be handled.
Noticed by Andrew Stubbs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5721 c046a42c-6fe2-441c-8c8c-71466251a162
Avoid scheduling DMA processing when all channels are stopped or at
end-of-list.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5720 c046a42c-6fe2-441c-8c8c-71466251a162
drive_get_index() returns -1 if a drive isn't found; don't
use -1 to index drives_table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5719 c046a42c-6fe2-441c-8c8c-71466251a162
Warning is:
target-i386/helper.c: In function `cpu_x86_cpuid':
target-i386/helper.c:1373: warning: implicit declaration of function `host_cpuid'
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5718 c046a42c-6fe2-441c-8c8c-71466251a162
Typo. Exposes rdtscp which kills some guests.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5717 c046a42c-6fe2-441c-8c8c-71466251a162
This patch switches the read handle of the signaling pipe into
non-blocking mode. This avoids unwanted blocking reads and also
allows to read all bytes out of the signaling pipe in case we got
signaled more that once before the handler ran.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5716 c046a42c-6fe2-441c-8c8c-71466251a162
The third argument to ioctl is a ... which allows any value to be passed. In
practice, glibc always treats the argument as a void *.
Do the same thing for the kvm ioctls to keep things consistent with a
traditional ioctl.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5715 c046a42c-6fe2-441c-8c8c-71466251a162
In TCP migration, prevent an endless loop trying to retrieve error status. In
exec migration, set the close pointer in the FdMigrationState structure.
Color me embarrassed.
Signed-off-by: Charles Duffy <charles_duffy@messageone.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5713 c046a42c-6fe2-441c-8c8c-71466251a162
The issue was first noticed/addressed by Laurent Vivier in his QEMU on
AIX patches.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5712 c046a42c-6fe2-441c-8c8c-71466251a162
malc found AIX headers leak "hz" and so it can't be used there. Change
the occurences in hw/.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5709 c046a42c-6fe2-441c-8c8c-71466251a162
ffs() is in <strings.h> although bsd compatible systems have it in
<string.h> already. ffs() is used in omap1.c, omap2.c, omap_i2c.c,
bt-sdp.c. These uses can be replaced with clz32() but ffs is more
available. Problem was spotted by malc.
Make host-utils.h formatting more consistent.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5708 c046a42c-6fe2-441c-8c8c-71466251a162
The patch in r5531 which replaced a bunch of strncpy with pstrcpy causes
the x509 credentials from the -vnc parameter to be one character shorter
than entered meaning that there is currently no way to enter x509
certificates...
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5707 c046a42c-6fe2-441c-8c8c-71466251a162
After going through the debug log and scratching my head for quite some
time. I found the following:
The problem was with this block move:
lsi_scsi: SCRIPTS dsp=0fae8e50 opcode 01000028 arg 00f63c40
lsi_scsi: DMA addr=0x00f63c40 len=36
The number of bytes to be transferred (len) should be 40 which corresponds
to the block transfer of length 0x28 (from opcode 01000028). Instead we
have a length of 36 (0x24). The code responsible for this is (in
'lsi_do_dma'):
if (count > s->current_dma_len)
count = s->current_dma_len;
Basically we're overwriting the length 40 with the value 36 which I
think we just left over in that variable from an earlier transfer. In my
patch below I initialize s->current_dma_len to s->dbc before we begin
the DMA transfer during Data In phase.
The attached patch gets Openserver 5.0.5 past the hardware detection
(and it lists the hard drive to boot, woohoo). It appears to stop a
little while later (doesn't seem SCSI related), but it's been so long since
I've booted Openserver I'm not sure what's supposted to happen after the HW
detection using the boot/root disks.
Props go to Craig Ringer for the initial post and the code that he posted
some of which is in this patch.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5706 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes the two following problems for Alpha linux-user:
- termbits.h is incorrectly using host IOC macros and structures
- IOC bitfields sizes are incorrectly set
This patch corrects the ioctl TCGETS done by isatty function call
on Alpha (when running SPEC crafty for instance).
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5704 c046a42c-6fe2-441c-8c8c-71466251a162
Unfortunately, -linux-user doesn't use osdep as it replaces some of those
functions with specific ones. The code #ifdef code in exec.c needs to
remain in place so instead of introducing a qemu_getpagesize() let's just
use getpagesize() in the non-Windows implementation of qemu_vmalloc.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5703 c046a42c-6fe2-441c-8c8c-71466251a162
This is pure code motion. The savevm code is all common code so we can build
it once and share the object with all executables.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5700 c046a42c-6fe2-441c-8c8c-71466251a162
This will improve the build time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5699 c046a42c-6fe2-441c-8c8c-71466251a162
Windows only flushes its cache of a CDROM if it gets a
SENSE_UNIT_ATTENTION CHECK_CONDITION response to a REQUEST_SENSE
command.
Make sure it does so after we change the CD.
Tab damage fixed by Anthony Liguori
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Steven Smith <steven.smith@citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5698 c046a42c-6fe2-441c-8c8c-71466251a162
This switches the tcp, telnet and unix socket support for character
devices (serial/parallel, ...) to the new socket helpers. Thereby they
gain IPv6 support and also get ability to search for a free tcp port.
Syntax is the same as for vnc, using a to= option, like this:
-serial tcp:localhost:5000,to=5099,server
This will check the 5000 -> 5099 port range (inclusive) for a free tcp
port. Likewise you can get auto-allocated unix sockets by specifying an
empty path:
-serial unix:,server
qemu will create a randomly named socket in $TMPDIR then.
tcp also got new "ipv4" and "ipv6" options to make qemu try only the
specified internet protocol version.
You can use the "info chardev" command added by the first patch in this
series to figure the tcp port / unix socket actually allocated.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5697 c046a42c-6fe2-441c-8c8c-71466251a162
This patch switches the vnc code ofer to the new socket helper
functions.
It adds support IPv6 support and for automatically allocating an unused
vnc display port. The latter is handled ising a to= option, specifying
the upper limit for the display number to try. Scanning is started at
the display number given in the display specification, i.e. this command
line:
-vnc localhost:7,to=11
will try displays 7 to 11 (inclusive).
There are also new "ipv4" and "ipv6" options to make qemu try only
the specified internet protocol version.
The display actually allocated can be queried using the "info vnc"
monitor command.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5696 c046a42c-6fe2-441c-8c8c-71466251a162
This patch creates a new source file qemu-sockets.c with a bunch of
helper functions to create listening and connected sockets.
New features of this code are (a) support for searching for a free
port in a given range and (b) support for IPv6.
The following patches put that code into use.
Compile fixes for Windows added by Anthony Liguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5695 c046a42c-6fe2-441c-8c8c-71466251a162
KVM's live migration support included support for exec: URLs, allowing system
state to be written or received via an arbitrary popen()ed subprocess. This
provides a convenient way to pipe state through a compression algorithm or an
arbitrary network transport on its way to its destination, and a convenient way
to write state to disk; libvirt's qemu driver currently uses migration to exec:
targets for this latter purpose.
This version of the patch refactors now-common code from migrate-tcp.c into
migrate.c.
Signed-off-by: Charles Duffy <Charles_Duffy@messageone.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5694 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes the decoding of CVTST /S which was
incorrectly being decoded as CVTTS.
This fixes SPEC2000 gcc with 200.i input.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5693 c046a42c-6fe2-441c-8c8c-71466251a162
Currently tap does not generate signals on I/O; this causes
network latency to be dependent on the timer tick (1ms without
dyntick, guest dependent with dyntick). By generating a signal
on I/O, we can inform the guest immediately that a packet has
arrived.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5688 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori
aurel32
malc
pbrook
blueswir1
edgar_igl
balrog