The vga_ram_size argument to machine init functions always has the same
value, and is ignored by many machines (including SPARC32 which has an
obsolete ifdef for VGA_RAM_SIZE).
Remove it and push VGA_RAM_SIZE into vga_int.h.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Now we can safely call AUD_init multiple times we can push it down to
individual audio devices, rather than having to pass it from the board
init.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Failure to initialize the audio subsystem is not handled consistently.
Where it is handled it has guest visible effects, which is wrong.
We already have a "nosound" audio driver as a last resort, so trying to
proceed without an audio backend seems pointless.
Also protect against multiple calls to AUD_init so that this can be
pushed down into individual devices.
Signed-off-by: Paul Brook <paul@codesourcery.com>
All VGA devices share a common field subset; currently they do so by
a macro which defines the common fields inline their state structures,
relying on the the common state being placed at offset 0 in the structure.
This makes refactoring the code difficult and requires a lot of error prone
casts.
Replace the macro by a new VGACommonState structure, and the casts by
regular field access and container_of() for upcasts.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci_register_device already mallocs the pci config space buffer filled
with zeroes.
Doing this again breaks some default config space writes like
setting the subsystem vendor id and subsystem device id.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The linux loader is just an option rom like any other, just with
some special requirements. Right now, our option rom resetting
mechanism is not being applied to it. As a result, users using
-kernel will not be able to successfully reboot their machines
This patch fixes it by saving all the data we generated in
the load_linux() function, to be used later by the option rom
resetting mechanism.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, boot options are not preserved across a system reset.
option roms can modify themselves, or can for instance restore the real
int 0x19 vector after they tried to boot from it.
To properly do that, we need a reset handler registered to deal with option
roms. This patch is based on current version on qemu-kvm.git
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Trivial build warning/fixes when the local DEBUG define is enabled.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pci_register_device() call in PCI nic initialization routines can
fail. Handle this failure and propagate a meaningful error message to
the user instead of generating a SEGV.
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to PnP specification, Appendix B, Option ROMs
that support DDIM (device driver initialization model) should
have their memory space writeable.
KVM deviates from us here, by removing the IO_MEM_ROM flag,
to allow for PCI option ROMs (they require DDIM). However,
there's absolutely no reason we can't do the same.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The inhdr is at the end of the S/G list, not the beginning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here is an updated hardware watchdog patch, which should fix
everything that was raised about the previous version ...
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[had the qemu list address wrong the first time, reply to this message,
not the previous if you were on Cc]
Add support for SG_IO passthru (packet commands) to the virtio-blk
backend. Conceptually based on an older patch from Hannes Reinecke
but largely rewritten to match the code structure and layering in
virtio-blk.
Note that currently we issue the hose SG_IO synchronously. We could
easily switch to async I/O, but that would required either bloating
the VirtIOBlockReq by the size of struct sg_io_hdr or an additional
memory allocation for each SG_IO request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
page0 and friends are ram addresses; a smaller size will overflow and
cause a segfault or random corruption.
Change them to ram_addr_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently IRQ are reinjected as soon as they are acknowledged to
the RTC, but Windows sometimes do acknowledgement in a loop with
global interrupt disabled waiting for interrupt to be cleared and
it does not mask RTC vector in PIC/APIC while doing this. In such
situation interrupt injection always fails and RTC interrupt is never
cleared.
Instead of reinjecting coalesced IRQs on acknowledgement the patch below
reinjects them by accelerating RTC clock a bit. This way RTC interrupt
is not constantly raced after coalesced interrupt.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
this patch adds a buffer_alignment field to BlockDriverState and
implements a qemu_blockalign function that uses that field to allocate a
memory aligned buffer to be used by the block driver.
buffer_alignment is initialized to 512 but each block driver can set
a different value (at the moment none of them do).
This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to
use qemu_blockalign instead of qemu_memalign.
There is only one place left that still uses qemu_memalign to allocate
buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw
because it is not possible to get the BlockDriverState from that
function. However I think it is not important because posix-aio-compat
already deals with driver specific code so it is supposed to know its
own needs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7229 c046a42c-6fe2-441c-8c8c-71466251a162
This adds domain building support for paravirtual domains to qemu.
This allows booting xen guests directly with qemu, without Xend
and the management stack.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu create backend and frontend device entries in
xenstore for devices configured on the command line. It will use
qdisk and qnic backend names, so the qemu internal backends will
be used.
Disks can be created using -drive if=xen,file=...
Nics can be created using -net nic,macaddr=...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a network interface backend driver to qemu. It is a pure
userspace implemention using the gntdev interface. It uses "qnet" as
backend name in xenstore so it doesn't interfere with the netback
backend (aka "vnif").
The network backend is hooked into the corrosponding qemu vlan, i.e.
vif 0 is hooked into vlan 0. To make the packages actually arrive
somewhere you additionally have to link the vlan to the outside world
using the usual qemu command line options such as "-net tap,...".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a block device backend driver to qemu. It is a pure
userspace implemention using the gntdev interface. It uses "qdisk" as
backend name in xenstore so it doesn't interfere with the other existing
backends (blkback aka "vbd" and tapdisk aka "tap").
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It
it based on current xen-unstable code. It has been changed to make
use of the common backend driver code. It also has been changed to
compile with xen headers older than release 3.3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a xenconsole backend driver. It it based on current
xen-unstable code. It has been changed to make use of the common
backend driver code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds infrastructure for xen backend drivers living in qemu,
so drivers don't need to implement common stuff on their own. It's
mostly xenbus management stuff: some functions to access xentore,
setting up xenstore watches, callbacks on device discovery and state
changes, handle event channel, ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
