Raw CPSR writes should skip the architectural checks for whether
we're allowed to set the A or F bits and should also not do
the switching of register banks if the mode changes. Handle
this inside cpsr_write(), which allows us to drop the "manually
set the mode bits to avoid the bank switch" code from all the
callsites which are using CPSRWriteRaw.
This fixes a bug in 32-bit KVM handling where we had forgotten
the "manually set the mode bits" part and could thus potentially
trash the register state if the mode from the last exit to userspace
differed from the mode on this exit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
If we can't find details for the debug exception in our debug state
then we can assume the exception is due to debugging inside the guest.
To inject the exception into the guest state we re-use the TCG exception
code (do_interrupt).
However while guest debugging is in effect we currently can't handle the
guest using single step as we will keep trapping to back to userspace.
GDB makes heavy use of single-step behind the scenes which effectively
means the guest's ability to debug itself is disabled while it is being
debugged.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-6-git-send-email-alex.bennee@linaro.org
[PMM: Fixed a few typos in comments and commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.
The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for single-step. There isn't much to do on the QEMU
side as after we set-up the request for single step via the debug ioctl
it is all handled within the kernel.
The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the
common code. If the kernel doesn't support guest debug the ioctl will
simply error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-4-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.
All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we haven't always had guest debug support we need to probe for it.
Additionally we don't do this in the start-up capability code so we
don't fall over on old kernels.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-2-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduces reusable definitions for CPU affinity masks/shifts and gets rid
of hardcoded magic numbers.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 7e6def4d0d91ae64615cdd2035b94d408d0a23c6.1441366248.git.p.fedin@samsung.com
[PMM: folded overlong line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some registers like the CNTVCT register should only be written to the
kernel as part of machine initialization or on vmload operations, but
never during runtime, as this can potentially make time go backwards or
create inconsistent time observations between VCPUs.
Introduce a list of registers that should not be written back at runtime
and check this list on syncing the register state to the KVM state.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1437046488-10773-1-git-send-email-christoffer.dall@linaro.org
[PMM: tweaked a few comments, added the new argument to the stub
write_list_to_kvmstate() in target-arm/kvm-stub.c]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
commit message.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code was negatively indexing the cpu state array and not
synchronizing banked spsr register state with the current mode's spsr
state, causing occasional failures with migration.
Some munging is done to take care of the aarch64 mapping and also to
ensure the most current value of the spsr is updated to the banked
registers (relevant for KVM<->TCG migration).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For migration to work we need to sync all of the register state. This is
especially noticeable when GCC starts using FP registers as spill
registers even with integer programs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the saving and restore of the current Multi-Processing state
of the machine. While the KVM_GET/SET_MP_STATE API exposes a number of
potential states for x86 we only use two for ARM. Either the process is
running or not. We then save this state into the cpu_powered TCG state
to avoid changing the serialisation format.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 32-bit to/from 64-bit register synchronization on register gets and puts.
Set EL1_32BIT feature flag passed to KVM
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1423736974-14254-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds:
1. Call write_kvmstate_to_list() and write_list_to_cpustate()
in kvm_arch_get_registers() to sync guest register state.
2. Call write_list_to_kvmstate() in kvm_arch_put_registers()
to sync guest register state.
These changes are already there for kvm32 in target-arm/kvm32.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-2-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before we launch a guest we query KVM for the list of "co-processor"
registers it knows about. This is used to synchronize system
register state for the bulk of coprocessor/system registers.
Move this code from the 32-bit specific vcpu init function into
a common routine and call it also from the 64-bit vcpu init.
This allows system registers to migrate correctly when using
KVM, and also permits QEMU code to see the current KVM register
state (which will be needed to support big-endian guests, since
the virtio endianness callback must check for some system register
settings).
Since vcpu reset also has to sync registers, we move the
32 bit kvm_arm_reset_vcpu() into common code as well and
share it with the 64 bit version.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: just copy the 32-bit code rather than improving it along the way;
don't share reg_syncs_via_tuple_list() between 32 and 64 bit;
tweak function names; move reset]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Break out code to save/restore AArch64 SP into functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1402994746-8328-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We require to know the PSCI version available to given CPU at
potentially many places. Currently, we need to know PSCI version
when generating DTB for virt machine.
This patch introduce per-CPU 32bit field representing the PSCI
version available to the CPU. The encoding of this 32bit field
is same as described in PSCI v0.2 spec.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402901605-24551-8-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To implement kvm_arch_reset_vcpu(), we simply re-init the VCPU
using kvm_arm_vcpu_init() so that all registers of VCPU are set
to their reset values by in-kernel KVM code.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402901605-24551-7-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Latest linux kernel supports in-kernel emulation of PSCI v0.2 but
to enable it we need to select KVM_ARM_VCPU_PSCI_0_2 feature using
KVM_ARM_VCPU_INIT ioctl.
Also, we can use KVM_ARM_VCPU_PSCI_0_2 feature for VCPU only when
linux kernel has KVM_CAP_ARM_PSCI_0_2 capability.
This patch updates kvm_arch_init_vcpu() to enable KVM_ARM_VCPU_PSCI_0_2
feature for VCPU when KVM ARM/ARM64 has KVM_CAP_ARM_PSCI_0_2 capability.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402901605-24551-6-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a common kvm_arm_vcpu_init() for doing KVM_ARM_VCPU_INIT
ioctl in KVM ARM and KVM ARM64. This also helps us factor-out few
common code lines from kvm_arch_init_vcpu() for KVM ARM/ARM64.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402901605-24551-5-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No functional change.
Prepares for future additions of the EL2 and 3 versions of this reg.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1400980132-25949-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a CPU object with a reset method, it is better to
keep the KVM reset close to the CPU reset. Using qemu_register_reset
as we do now keeps them far apart.
With this patch, PPC no longer calls the kvm_arch_ function, so
it can get removed there. Other arches call it from their CPU
reset handler, and the function gets an ARMCPU/X86CPU/S390CPU.
Note that ARM- and s390-specific functions are called kvm_arm_*
and kvm_s390_*, while x86-specific functions are called kvm_arch_*.
That follows the convention used by the different architectures.
Changing that is the topic of a separate patch.
Reviewed-by: Gleb Natapov <gnatapov@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the AArch64 SPSR_EL1. For compatibility with how KVM
handles SPSRs and with the architectural mapping between AArch32
and AArch64, we put this in the banked_spsr[] array in the slot
that is used for SVC in AArch32. This means we need to extend the
array from uint32_t to uint64_t, which requires some reworking
of the 32 bit KVM save/restore code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement handling for the AArch64 SP_EL0 system register.
This holds the EL0 stack pointer, and is only accessible when
it's not being used as the stack pointer, ie when we're in EL1
and EL1 is using its own stack pointer. We also provide a
definition of the SP_EL1 register; this isn't guest visible
as a system register for an implementation like QEMU which
doesn't provide EL2 or EL3; however it is useful for ensuring
the underlying state is migrated.
We need to update the state fields in the CPU state whenever
we switch stack pointers; this happens when we take an exception
and also when SPSEL is used to change the bit in PSTATE which
indicates which stack pointer EL1 should use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add the AArch64 ELR_EL1 register.
Note that this does not live in env->cp15: for KVM migration
compatibility we need to migrate it separately rather than
as part of the system registers, because the KVM-to-userspace
interface puts it in the struct kvm_regs rather than making
them visible via the ONE_REG ioctls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
* CPU initialization
* minimal get/put register functions which only handle the
basic state of the CPU
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
* code lives in kvm64.c rather than using #ifdefs
* support '-cpu host' rather than implicitly using whatever the
host's CPU is regardless of what the user requests
* fix bug attempting to get/set nonexistent X[31]
* fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
