Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Sergey Fedorov: eliminate the field entirely in user-mode]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[rth: merged followup fixup]
Message-Id: <1462982777-4513-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unify the code of this function with tb_jmp_remove_from_list(). Making
these functions similar improves their readability. Also this could be a
step towards making this function thread-safe.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Move the code for removing jumps to a TB out of tb_phys_invalidate() to
a separate static inline function tb_jmp_unlink(). This simplifies
tb_phys_invalidate() and improves code structure.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
tb_jmp_remove() was only used to remove the TB from a list of all TBs
jumping to the same TB which is n-th jump destination of the given TB.
Put a comment briefly describing the function behavior and rename it to
better reflect its purpose.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The check is to make sure that another thread hasn't already done the
same while we were outside of tb_lock. Mention this in a comment.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Initialize TB's direct jump list data fields and reset the jumps before
tb_link_page() puts it into the physical hash table and the physical
page list. So TB is completely initialized before it becomes visible.
This is pure rearrangement of code to a more suitable place, though it
could be a preparation for relaxing the locking scheme in future.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These fields do not contain pure pointers to a TranslationBlock
structure. So uintptr_t is the most appropriate type for them.
Also put some asserts to assure that the two least significant bits of
the pointer are always zero before assigning it to jmp_list_first.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.
Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
tb_next_offset => jmp_reset_offset
tb_jmp_offset => jmp_insn_offset
tb_next => jmp_target_addr
jmp_next => jmp_list_next
jmp_first => jmp_list_first
Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The setting of tcg_ctx.code_gen_buffer_size is done by the only caller of
size_code_gen_buffer(), which is code_gen_alloc():
$ git grep size_code_gen_buffer
translate-all.c:static inline size_t size_code_gen_buffer(size_t tb_size)
translate-all.c: tcg_ctx.code_gen_buffer_size = size_code_gen_buffer(tb_size);
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1461283314-2353-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in MIPS is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-11-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Merged the deposit32 followup.]
[rth: Merged the following followup.]
Message-Id: <1462210518-26522-1-git-send-email-sergey.fedorov@linaro.org>
Ensure direct jump patching in SPARC is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1461341333-19646-10-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in AArch64 is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-9-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in ARM is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-8-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in s390 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-7-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in i386 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
tcg_out_nopn() implementation:
Suggested-by: Richard Henderson <rth@twiddle.net>.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-6-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in PPC is atomic by:
* limiting translation buffer size in 32-bit mode to be addressable by
Branch I-form instruction;
* using atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1461341333-19646-5-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in TCI is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() to load/store the address.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-4-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These macros provide a convenient way to n-byte align pointers up and
down and check if a pointer is n-byte aligned.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-3-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.
Compile-tested for all targets.
Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NbjJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 12 May 2016 14:37:05 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (69 commits)
qemu-iotests: iotests: fail hard if not run via "check"
block: enable testing of LUKS driver with block I/O tests
block: add support for encryption secrets in block I/O tests
block: add support for --image-opts in block I/O tests
qemu-io: Add 'write -z -u' to test MAY_UNMAP flag
qemu-io: Add 'write -f' to test FUA flag
qemu-io: Allow unaligned access by default
qemu-io: Use bool for command line flags
qemu-io: Make 'open' subcommand more like command line
qemu-io: Add missing option documentation
qmp: add monitor command to add/remove a child
quorum: implement bdrv_add_child() and bdrv_del_child()
Add new block driver interface to add/delete a BDS's child
qemu-img: check block status of backing file when converting.
iotests: fix the redirection order in 083
block: Inactivate all children
block: Drop superfluous invalidating bs->file from drivers
block: Invalidate all children
nbd: Simplify client FUA handling
block: Honor BDRV_REQ_FUA during write_zeroes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* blizzard, omap_lcdc: code cleanup to remove DEPTH != 32 dead code
* QOMify various ARM devices
* bcm2835_property: use cached values when querying framebuffer
* hw/arm/nseries: don't allocate large sized array on the stack
* fix LPAE descriptor address masking (only visible for EL2)
* fix stage 2 exec permission handling for AArch32
* first part of supporting syndrome info for data aborts to EL2
* virt: NUMA support
* work towards i.MX6 support
* avoid unnecessary TLB flush on TCR_EL2, TCR_EL3 writes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RL/g
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160512' into staging
target-arm queue:
* blizzard, omap_lcdc: code cleanup to remove DEPTH != 32 dead code
* QOMify various ARM devices
* bcm2835_property: use cached values when querying framebuffer
* hw/arm/nseries: don't allocate large sized array on the stack
* fix LPAE descriptor address masking (only visible for EL2)
* fix stage 2 exec permission handling for AArch32
* first part of supporting syndrome info for data aborts to EL2
* virt: NUMA support
* work towards i.MX6 support
* avoid unnecessary TLB flush on TCR_EL2, TCR_EL3 writes
# gpg: Signature made Thu 12 May 2016 14:29:14 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20160512: (43 commits)
hw/arm: QOM'ify versatilepb.c
hw/arm: QOM'ify strongarm.c
hw/arm: QOM'ify stellaris.c
hw/arm: QOM'ify spitz.c
hw/arm: QOM'ify pxa2xx_pic.c
hw/arm: QOM'ify pxa2xx.c
hw/arm: QOM'ify integratorcp.c
hw/arm: QOM'ify highbank.c
hw/arm: QOM'ify armv7m.c
target-arm: Avoid unnecessary TLB flush on TCR_EL2, TCR_EL3 writes
hw/display/blizzard: Remove blizzard_template.h
hw/display/blizzard: Expand out macros
i.MX: Add sabrelite i.MX6 emulation.
i.MX: Add i.MX6 SOC implementation.
i.MX: Add the Freescale SPI Controller
FIFO: Add a FIFO32 implementation
i.MX: Add i.MX6 System Reset Controller device.
ARM: Factor out ARM on/off PSCI control functions
ACPI: Virt: Generate SRAT table
ACPI: move acpi_build_srat_memory to common place
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXNIZVAAoJEDuxQgLoOKytrQcH/1PleLZ6jzu1ZQLmrCx73OBf
B8pLjSNvGxGQaFfc0SZi4kLhsVtk5s7CZwwY2i0xSnYetcrOa/w9ioLj4j9CkSpb
zU80k+HeYagLGpF5TbVbMaBcZK0UAu0ti4eWGcbwN5rdpmO4sdpTrR5rx8n0dziW
qj20p7Z9NfDPEQfMJ45Aco0cQ//NsAh4FaPCHdJvgIsrL7uoD9dQ6CN+DrstXQsq
GRSS/doWCxohtdX01C5OLATvTKkEO10hrO9INo27Db/XC0PovaELZTa5lfQgYBlD
zx4Xv2ga/dEf3pYWTj2/wPmBa06GUV3xts3WpWJqjbXkYbczWllYoqA4z7R0/lw=
=A6+m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-05-12' into queue-block
Block patches for 2.7
# gpg: Signature made Thu May 12 15:34:13 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-05-12:
qemu-iotests: iotests: fail hard if not run via "check"
block: enable testing of LUKS driver with block I/O tests
block: add support for encryption secrets in block I/O tests
block: add support for --image-opts in block I/O tests
qemu-io: Add 'write -z -u' to test MAY_UNMAP flag
qemu-io: Add 'write -f' to test FUA flag
qemu-io: Allow unaligned access by default
qemu-io: Use bool for command line flags
qemu-io: Make 'open' subcommand more like command line
qemu-io: Add missing option documentation
qmp: add monitor command to add/remove a child
quorum: implement bdrv_add_child() and bdrv_del_child()
Add new block driver interface to add/delete a BDS's child
qemu-img: check block status of backing file when converting.
iotests: fix the redirection order in 083
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Running an iotests-based Python test directly might appear to work,
but may fail in subtle ways and is insecure:
- It creates files with predictable file names in a world-writable
location (/var/tmp).
- Tests expect the environment to be set up by check. E.g. 041 and 055
may take the wrong code paths if QEMU_DEFAULT_MACHINE is not
set. This can lead to false negatives.
Instead fail hard and tell the user we want to be run via "check".
The actual environment expected by the tests is currently only defined
by the implementation of "check". We use two of the environment
variables set by "check" as indication of whether we're being run via
"check". Anyone writing their own test runner (replacing "check") will
need to replicate the full environment (in a broader sense, not just
environment variables) provided by "check" anyway, including setting
the two environment variables we check. Whereas a regular developer
just trying to invoke the tests usually won't have both of these
defined in their environment so we can catch their mistake and give
out useful advice.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1461094442-16014-1-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for testing the LUKS driver with the block
I/O test framework.
cd tests/qemu-io-tests
./check -luks
A handful of test cases are modified to work with luks
- 004 - whitelist luks format
- 012 - use TEST_IMG_FILE instead of TEST_IMG for file ops
- 048 - use TEST_IMG_FILE instead of TEST_IMG for file ops.
don't assume extended image contents is all zeros,
explicitly initialize with zeros
Make file size smaller to avoid having to decrypt
1 GB of data.
- 052 - don't assume initial image contents is all zeros,
explicitly initialize with zeros
- 100 - don't assume initial image contents is all zeros,
explicitly initialize with zeros
With this patch applied, the results are as follows:
Passed: 001 002 003 004 005 008 009 010 011 012 021 032 043
047 048 049 052 087 100 134 143
Failed: 033 120 140 145
Skipped: 007 013 014 015 017 018 019 020 022 023 024 025 026
027 028 029 030 031 034 035 036 037 038 039 040 041
042 043 044 045 046 047 049 050 051 053 054 055 056
057 058 059 060 061 062 063 064 065 066 067 068 069
070 071 072 073 074 075 076 077 078 079 080 081 082
083 084 085 086 087 088 089 090 091 092 093 094 095
096 097 098 099 101 102 103 104 105 107 108 109 110
111 112 113 114 115 116 117 118 119 121 122 123 124
128 129 130 131 132 133 134 135 136 137 138 139 141
142 144 146 148 150 152
The reasons for the failed tests are:
- 033 - needs adapting to use image opts syntax with blkdebug
and test image in order to correctly set align property
- 120 - needs adapting to use correct -drive syntax for luks
- 140 - needs adapting to use correct -drive syntax for luks
- 145 - needs adapting to use correct -drive syntax for luks
The vast majority of skipped tests are exercising code that is
qcow2 specific, though a couple could probably be usefully
enabled for luks too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-4-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The LUKS block driver tests will require the ability to specify
encryption secrets with block devices. This requires using the
--object argument to qemu-img/qemu-io to create a 'secret'
object.
When the IMGKEYSECRET env variable is set, it provides the
password to be associated with a secret called 'keysec0'
The _qemu_img_wrapper function isn't modified as that needs
to cope with differing syntax for subcommands, so can't be
made to use the image opts syntax unconditionally.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-3-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently all block tests use the traditional syntax for images
just specifying a filename. To support the LUKS driver without
resorting to JSON, the tests need to be able to use the new
--image-opts argument to qemu-img and qemu-io.
This introduces a new env variable IMGOPTSSYNTAX. If this is
set to 'true', then qemu-img/qemu-io should use --image-opts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1462896689-18450-2-git-send-email-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make it easier to control whether the BDRV_REQ_MAY_UNMAP flag
can be passed through a write_zeroes command, by adding the '-u'
flag to qemu-io 'write -z' and 'aio_write -z'. To be useful,
the device has to be opened with BDRV_O_UNMAP (done by default
in qemu-io, but can be made explicit with '-d unmap').
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1462677405-4752-7-git-send-email-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make it easier to test block drivers with BDRV_REQ_FUA in
.supported_write_flags, by adding the '-f' flag to qemu-io to
conditionally pass the flag through to specific writes ('write',
'write -z', 'writev', 'aio_write', 'aio_write -z'). You'll want
to use 'qemu-io -t none' to actually make -f useful (as
otherwise, the default writethrough mode automatically sets the
FUA bit on every write).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-6-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There's no reason to require the user to specify a flag just so
they can pass in unaligned numbers. Keep 'read -p' and 'write -p'
as no-ops so that I don't have to hunt down and update all users
of qemu-io, but otherwise make their behavior default as 'read' and
'write'. Also fix 'write -z', 'readv', 'writev', 'writev',
'aio_read', 'aio_write', and 'aio_write -z'. For now, 'read -b',
'write -b', and 'write -c' still require alignment (and 'multiwrite',
but that's slated to die soon).
qemu-iotest 23 is updated to match, as the only test that was
previously explicitly expecting an error on an unaligned request.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-5-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We require a C99 compiler; let's use it to express what we
really mean.
(Yes, we now have an instance of 'if (bool + bool + bool > 1)',
which, although semantically valid C, looks ugly; it gets
cleaned up later.)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1462677405-4752-4-git-send-email-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The command line defaults to BDRV_O_UNMAP, but can use
-d to reset it. Meanwhile, the 'open' subcommand was
defaulting to no discards, with no way to set it.
The command line has both -n and -tMODE to set a variety
of cache modes, but the 'open' subcommand had only -n.
The 'open' subcommand had no way to set BDRV_O_NATIVE_AIO.
Note that the 'reopen' subcommand uses '-c' where the
command line and 'open' use -t. Making that consistent
would be a separate patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-3-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The Usage: summary is missing several options, but rather than
having to maintain it, it's simpler to just state [OPTIONS],
since the options are spelled out below.
Commit 499afa2 added --image-opts, but forgot to document it in
--help. Likewise for commit 9e8f183 and -d/--discard.
Commit e3aff4f6 put "-o/--offset" in the long opts, but it has
never been honored.
Add a note that '-n' is short for '-t none'.
Commit 9a2d77ad killed the -C option, but forgot to undocument
it for the 'open' subcommand.
Finally, commit 10d9d75 removed -g/--growable, but forgot to
cull it from the valid short options.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1462677405-4752-2-git-send-email-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The new QMP command name is x-blockdev-change. It's just for adding/removing
quorum's child now, and doesn't support all kinds of children, all kinds of
operations, nor all block drivers. So it is experimental now.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1462865799-19402-4-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In some cases, we want to take a quorum child offline, and take
another child online.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1462865799-19402-2-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When converting images, check the block status of its backing file chain
to avoid needlessly reading zeros.
Signed-off-by: Ren Kimura <rkx1209dev@gmail.com>
Message-id: 1461773098-20356-1-git-send-email-rkx1209dev@gmail.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It should redirect stdout to /dev/null first,
then redirect stderr to whatever stdout currently points at.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-id: 1461665601-14908-1-git-send-email-weijg.fnst@cn.fujitsu.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently we only inactivate the top BDS. Actually bdrv_inactivate
should be the opposite of bdrv_invalidate_cache.
Recurse into the whole subtree instead.
Because a node may have multiple parents, and because once
BDRV_O_INACTIVE is set for a node, further writes are not allowed, we
cannot interleave flag settings and .bdrv_inactivate calls (that may
submit write to other nodes in a graph) within a single pass. Therefore
two passes are used here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now they are invalidated by the block layer, so it's not necessary to
do this in block drivers' implementations of .bdrv_invalidate_cache.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we only recurse to bs->file, which will miss the children in quorum
and VMDK.
Recurse into the whole subtree to avoid that.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the block layer honors per-bds FUA support, we don't
have to duplicate the fallback flush at the NBD layer. The
static function nbd_co_writev_flags() is no longer needed, and
the driver can just directly use nbd_client_co_writev().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
