The logic of handling quick SMBus commands was wrong. If you get a
finish event with no data, that's a quick command.
Document the quick command while we are at it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
i2c_recv() cannot fail, so there is no need to check the return
value. It also returns unt8_t, so comparing with < 0 is not
meaningful.
Fix up various I2C controllers to remove the unneeded code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
It can't fail, and now that it returns a uint8_t a 0xff mask
is unnecessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
It is never supposed to fail and cannot return an error, so just
have it return the proper type. Have it return 0xff on nothing
available, since that's what would happen on a real bus.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
smbus.c and smbus.h had device side code, master side code, and
smbus.h has some smbus_eeprom.c definitions. Split them into
separate files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Set up MMI code to be compiled only for TARGET_MIPS64. This is
needed so that GPRs are 64 bit, and combined with MMI registers,
they will form full 128 bit registers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551183797-13570-2-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for MSA integer max/min instructions. This includes
following instructions:
* MAX_A.B - maximum of absolute of two signed values (bytes)
* MAX_A.H - maximum of absolute of two signed values (halfwords)
* MAX_A.W - maximum of absolute of two signed values (words)
* MAX_A.D - maximum of absolute of two signed values (doublewords)
* MIN_A.B - minimum of absolute of two signed values (bytes)
* MIN_A.H - minimum of absolute of two signed values (halfwords)
* MIN_A.W - minimum of absolute of two signed values (words)
* MIN_A.D - minimum of absolute of two signed values (doublewords)
* MAX_S.B - maximum of two signed values (bytes)
* MAX_S.H - maximum of two signed values (halfwords)
* MAX_S.W - maximum of two signed values (words)
* MAX_S.D - maximum of two signed values (doublewords)
* MIN_S.B - minimum of two signed values (bytes)
* MIN_S.H - minimum of two signed values (halfwords)
* MIN_S.W - minimum of two signed values (words)
* MIN_S.D - minimum of two signed values (doublewords)
* MAX_U.B - maximum of two unsigned values (bytes)
* MAX_U.H - maximum of two unsigned values (halfwords)
* MAX_U.W - maximum of two unsigned values (words)
* MAX_U.D - maximum of two unsigned values (doublewords)
* MIN_U.B - minimum of two unsigned values (bytes)
* MIN_U.H - minimum of two unsigned values (halfwords)
* MIN_U.W - minimum of two unsigned values (words)
* MIN_U.D - minimum of two unsigned values (doublewords)
Each test consists of 80 test cases, so altogether there are 1920
test cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add section on MIPS' Boston board in QEMU user documentation.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-6-git-send-email-aleksandar.markovic@rt-rk.com>
Add section on MIPS' Fulong 2E board in QEMU user documentation.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-5-git-send-email-aleksandar.markovic@rt-rk.com>
Move section on MIPS' mipssim pseudo board to the more
appropriate place.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-4-git-send-email-aleksandar.markovic@rt-rk.com>
Rename function extract_ac_13_12() to extract_ac_15_14().
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-3-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MSA integer compare instructions. This includes
following instructions:
* CEQ.B - integer compare equal (bytes)
* CEQ.H - integer compare equal (halfwords)
* CEQ.W - integer compare equal (words)
* CEQ.D - integer compare equal (doublewords)
* CLE_S.B - signed integer compare less or equal (bytes)
* CLE_S.H - signed integer compare less or equal (halfwords)
* CLE_S.W - signed integer compare less or equal (words)
* CLE_S.D - signed integer compare less or equal (doublewords)
* CLE_U.B - unsigned integer compare less or equal (bytes)
* CLE_U.H - unsigned integer compare less or equal (halfwords)
* CLE_U.W - unsigned integer compare less or equal (words)
* CLE_U.D - unsigned integer compare less or equal (doublewords)
* CLT_S.B - signed integer compare less or equal (bytes)
* CLT_S.H - signed integer compare less or equal (halfwords)
* CLT_S.W - signed integer compare less or equal (words)
* CLT_S.D - signed integer compare less or equal (doublewords)
* CLT_U.B - unsigned integer compare less or equal (bytes)
* CLT_U.H - unsigned integer compare less or equal (halfwords)
* CLT_U.W - unsigned integer compare less or equal (words)
* CLT_U.D - unsigned integer compare less or equal (doublewords)
Each test consists of 80 test cases, so altogether there are 1600 test
cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-2-git-send-email-aleksandar.markovic@rt-rk.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current network services now support encryption via TLS and in some
cases support authentication via SASL. In cases where SASL is not
available, x509 client certificates can be used as a crude authorization
scheme, but using a sub-CA and controlling who you give certs to. In
general this is not very flexible though, so this series introduces a
new standard authorization framework.
It comes with four initial authorization mechanisms
- Simple - an exact username match. This is useful when there is
exactly one user that is known to connect. For example when live
migrating from one QEMU to another with TLS, libvirt would use
the simple scheme to whitelist the TLS cert of the source QEMU.
- List - an full access control list, with optional regex matching.
This is more flexible and is used to provide 100% backcompat with
the existing HMP ACL commands. The caveat is that we can't create
these via the CLI -object arg yet.
- ListFile - the same as List, but with the rules stored in JSON
format in an external file. This avoids the -object limitation
while also allowing the admin to change list entries on the file.
QEMU uses inotify to notice these changes and auto-reload the
file contents. This is likely a good default choice for most
network services, if the "simple" mechanism isn't sufficient.
- PAM - delegate the username lookup to a PAM module, which opens
the door to many options including things like SQL/LDAP lookups.
-----BEGIN PGP SIGNATURE-----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=67pz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/authz-core-pull-request' into staging
Add a standard authorization framework
The current network services now support encryption via TLS and in some
cases support authentication via SASL. In cases where SASL is not
available, x509 client certificates can be used as a crude authorization
scheme, but using a sub-CA and controlling who you give certs to. In
general this is not very flexible though, so this series introduces a
new standard authorization framework.
It comes with four initial authorization mechanisms
- Simple - an exact username match. This is useful when there is
exactly one user that is known to connect. For example when live
migrating from one QEMU to another with TLS, libvirt would use
the simple scheme to whitelist the TLS cert of the source QEMU.
- List - an full access control list, with optional regex matching.
This is more flexible and is used to provide 100% backcompat with
the existing HMP ACL commands. The caveat is that we can't create
these via the CLI -object arg yet.
- ListFile - the same as List, but with the rules stored in JSON
format in an external file. This avoids the -object limitation
while also allowing the admin to change list entries on the file.
QEMU uses inotify to notice these changes and auto-reload the
file contents. This is likely a good default choice for most
network services, if the "simple" mechanism isn't sufficient.
- PAM - delegate the username lookup to a PAM module, which opens
the door to many options including things like SQL/LDAP lookups.
# gpg: Signature made Tue 26 Feb 2019 15:33:46 GMT
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/authz-core-pull-request:
authz: delete existing ACL implementation
authz: add QAuthZPAM object type for authorizing using PAM
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZList object type for an access control list
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZ object as an authorization base class
hw/usb: switch MTP to use new inotify APIs
hw/usb: fix const-ness for string params in MTP driver
hw/usb: don't set IN_ISDIR for inotify watch in MTP driver
qom: don't require user creatable objects to be registered
util: add helper APIs for dealing with inotify in portable manner
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we run "certtool 2>&1 | head -1" the latter command is likely to
complete and exit before certtool has written everything it wants to
stderr. In at least the RHEL-7 gnutls 3.3.29 this causes certtool to
quit with broken pipe before it has finished writing the desired
output file to disk. This causes non-deterministic failures of the
iotest 233 because the certs are sometimes zero length files.
If certtool fails the "head -1" means we also lose any useful error
message it would have printed.
Thus this patch gets rid of the pipe and post-processes the output in a
more flexible & reliable manner.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we abort the iotest early the server.log file might contain useful
information for diagnosing the problem. Ensure its contents are
displayed in this case.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-2-berrange@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
The data type for bytes in Python 3 differs from the one in Python 2.
The type cast that is compatible with both versions was applied.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1551197495-24425-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type,
initializing it from an external file, and optionally, automatically
reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list-file",
"id": "authz0",
"props": {
"filename": "/etc/qemu/vnc.acl",
"refresh": true
}
}
}
If "refresh" is "yes", inotify is used to monitor the file,
automatically reloading changes. If an error occurs during reloading,
all authorizations will fail until the file is next successfully
loaded.
The /etc/qemu/vnc.acl file would contain a JSON representation of a
QAuthZList object
{
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"props": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.
In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"props": {
"identity": "fred"
}
}
}
Or via the command line
-object authz-simple,id=authz0,identity=fred
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.
Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.
There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.
The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The internal inotify APIs allow a lot of conditional statements to be
cleared out, and provide a simpler callback for handling events.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Various functions accepting 'char *' string parameters were missing
'const' qualifiers.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
IN_ISDIR is not a bit that one can request when registering a
watch with inotify_add_watch. Rather it is a bit that is set
automatically when reading events from the kernel.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When an object is in turn owned by another user object, it is not
desirable to expose this in the QOM object hierarchy. It is just an
internal implementation detail, we should be free to change without
exposure to apps managing QEMU.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We missed a bug in a recent patch as we were not testing all the
rounding modes for all operations. However enabling all rounding modes
for mulAdd does slow down the already slowest test and doesn't really
buy us much additional coverage so lets allow the default test flags
to be overridden.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Previously this was only supported for roundAndPackFloat64.
New support in round_canonical, round_to_int, float128_round_to_int,
roundAndPackFloat32, roundAndPackInt32, roundAndPackInt64,
roundAndPackUint64. This does not include any of the floatx80 routines,
as we do not have users for that rounding mode there.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190215170225.15537-1-richard.henderson@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
[AJB: add missing break]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've just added f128_to_ui32 and we missed out the f128_to_ui64 tests
last time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Needed to test: softfloat: Implement float128_to_uint32
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Handling it just like float128_to_uint32_round_to_zero, that hopefully
is free of bugs :)
Documentation basically copied from float128_to_uint64
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Needed on s390x, to test for the data class of a number. So it will
gain soon a user.
A number is considered normal if the exponent is neither 0 nor all 1's.
That can be checked by adding 1 to the exponent, and comparing against
>= 2 after dropping an eventual overflow into the sign bit.
While at it, convert the other floatXX_is_normal functions to use a
similar, less error prone calculation, as suggested by Richard H.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 2cade3d wired up new tests, but did not exclude the
new *.out files produced by running the tests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Using IEC binary prefixes from qemu/units.h provides a more human-friendly value
to size constants.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20190225170155.1972-4-muriloo@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current 0x10000000 value is actually 256MiB, not 128MB as the comment
suggests. Move it to a constant and fix the comment (no change in the size
value).
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20190225170155.1972-3-muriloo@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Building kernel with CONFIG_DEBUG_INFO_REDUCED can generate a ~90MB image and
building with CONFIG_DEBUG_INFO can generate a ~225M one, both exceeds the
current limit of 32MiB.
Increasing kernel size limit to 256MiB should fit for now.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20190225170155.1972-2-muriloo@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both functions, object_initialize() and object_property_add_child() increase
the reference counter of the new object, so one of the references has to be
dropped afterwards to get the reference counting right. Otherwise the child
object will not be properly cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the reference
counting here right.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1550748288-30598-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Patch "target/ppc: Add POWER9 external interrupt model" should have
removed the section covering PPC_FLAGS_INPUT_POWER7.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190219142530.17807-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can easily test this, just like PCI. PHB unplug is not supported
on s390x and x86 ACPI.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059673939.1466090.14354001937819612724.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'dr_phb_enabled' field of that class can be set as part of
machine-specific init code. It will be used to conditionally
enable creation of DRC objects and device-tree description to
facilitate hotplug of PHBs.
Since we can't migrate this state to older machine types,
default the option to true and disable it for older machine
types.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <155059673433.1466090.6188091133769611501.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hotplugging PHBs is a machine-level operation, but PHBs reside on the
main system bus, so we register spapr machine as the handler for the
main system bus.
Provide the usual pre-plug, plug and unplug-request handlers.
Move the checking of the PHB index to the pre-plug handler. It is okay
to do that and assert in the realize function because the pre-plug
handler is always called, even for the oldest machine types we support.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(Fixed interrupt controller phandle in "interrupt-map" and
TCE table size in "ibm,dma-window" FDT fragment, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059672926.1466090.13612804072190051439.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is needed to denote a boot-time PHB as being hot-pluggable.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059672420.1466090.15147504040270659866.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PHB hotplug re-uses PHB device tree generation code and passes
it to a guest via RTAS. Doing this requires knowledge of where
exactly in the device tree the node describing the PHB begins.
Provide this via a new optional pointer that can be used to
store the PHB node's start offset.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059671912.1466090.10891589403973703473.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the existing EPOW event format we use for PCI
devices to emit PHB plug/unplug events.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059671405.1466090.535964535260503283.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This add entries to the root OF node to advertise our PHBs as being
DR-capable in accordance with PAPR specification.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059670897.1466090.10843921337591637414.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059670389.1466090.10015601248906623076.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To support PHB hotplug we need to clean up lingering references,
memory, child properties, etc. prior to the PHB object being
finalized. Generally this will be called as a result of calling
object_unparent() on the PHB object, which in turn would normally
be called as the result of an unplug() operation.
When the PHB is finalized, child objects will be unparented in
turn, and finalized if the PHB was the only reference holder. so
we don't bother to explicitly unparent child objects of the PHB,
with the notable exception of DRCs. This is needed to avoid a QEMU
crash when unplugging a PHB and resetting the machine before the
guest could handle the event. The DRCs are removed from the QOM tree
by pci_unregister_root_bus() and we must make sure we're not leaving
stale aliases under the global /dr-connector path.
The formula that gives the number of DMA windows is moved to an
inline function in the hw/pci-host/spapr.h header because it
will have other users.
The unrealize function is able to cope with partially realized PHBs.
It is hence used to implement proper rollback on the realize error
path.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <155059669881.1466090.13515030705986041517.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
