Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On ARM, the Top Byte Ignore feature means that only 56 bits of
the address are significant in the virtual address. We are
required to give the entire 64-bit address to FAR_ELx on fault,
which means that we do not "clean" the top byte early in TCG.
This new interface allows us to flush all 256 possible aliases
for a given page, currently missed by tlb_flush_page*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201016210754.818257-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect all MIPS store instructions in cpu_signal_handler for all available
MIPS versions, and set is_write if encountering such store instructions.
This fixed the error while dealing with self-modified code for MIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Kele Huang <kele.hwang@gmail.com>
Signed-off-by: Xu Zou <iwatchnima@gmail.com>
Message-Id: <20201002081420.10814-1-kele.hwang@gmail.com>
[rth: Use uintptr_t for pc to fix n32 build error.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
--
v4 changes:
- inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée)
Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt poll is not a real interrupt event. It is needed only for
thread safety. This interrupt is used for i386 and converted
to hardware interrupt by cpu_handle_interrupt function.
Therefore it is not needed to be recorded, because hardware
interrupt will be recorded after converting.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
--
v4 changes:
- Condition check refactoring (suggested by Alex Bennée)
Message-Id: <160174517124.12451.12983410242461131737.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
current_machine is always set before accelerators are initialized,
so use that instead of MACHINE(qdev_get_machine()).
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the error handling in kvm_init_vcpu so we can see what went
wrong more easily.
Make it take an Error ** and fill it out with what failed, including
the cpu id, so you can tell if it only fails at a given ID.
Replace the remaining DPRINTF by a trace.
This turns a:
kvm_init_vcpu failed: Invalid argument
into:
kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument
and with the trace you then get to see:
19049@1595520414.310107:kvm_init_vcpu index: 169 id: 212
19050@1595520414.310635:kvm_init_vcpu index: 170 id: 256
qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (256): Invalid argument
which makes stuff a lot more obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200723160915.129069-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for KVM as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for qtest as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG is the first accelerator to register a "CpusAccel" interface
on initialization, providing functions for starting a vcpu,
kicking a vcpu, sychronizing state and getting virtual clock
and ticks.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is only meanful to initialize a X86/PC machine,
rename it as xen_hvm_init_pc().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Last uses of memory_region_clear_global_locking() have been
removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked")
and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O
path to TLB path").
Remove memory_region_clear_global_locking() and the now unused
'global_locking' field in MemoryRegion.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200806150726.962-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This has no functional change.
The current function structure is:
inline QEMU_ALWAYSINLINE
store_memop() {
switch () {
...
default:
qemu_build_not_reached();
}
}
inline QEMU_ALWAYSINLINE
store_helper() {
...
if (span_two_pages_or_io) {
...
helper_ret_stb_mmu();
}
store_memop();
}
helper_ret_stb_mmu() {
store_helper();
}
Whereas GCC will generate an error at compile-time when an always_inline
function is not inlined, Clang does not. Nor does Clang prioritize the
inlining of always_inline functions. Both of these are arguably bugs.
Both `store_memop` and `store_helper` need to be inlined and allow
constant propogations to eliminate the `qemu_build_not_reached` call.
However, if the compiler instead chooses to inline helper_ret_stb_mmu
into store_helper, then store_helper is now self-recursive and the
compiler is no longer able to propagate the constant in the same way.
This does not produce at current QEMU head, but was reproducible
at v4.2.0 with `clang-10 -O2 -fexperimental-new-pass-manager`.
The inline recursion problem can be fixed solely by marking
helper_ret_stb_mmu as noinline, so the compiler does not make an
incorrect decision about which functions to inline.
In addition, extract store_helper_unaligned as a noinline subroutine
that can be shared by all of the helpers. This saves about 6k code
size in an optimized x86_64 build.
Reported-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_XEN is generated by configure and stored in "config-target.h",
which is (obviously) only include for target-specific objects.
This is a problem for target-agnostic objects as CONFIG_XEN is never
defined and xen_enabled() is always inlined as 'false'.
Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE
when we don't know to force the call of the non-inlined function,
returning the xen_allowed boolean.
Fixes: da278d58a0 ("accel: Move Xen accelerator code under accel/xen/")
Reported-by: Paul Durrant <pdurrant@amazon.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200804074930.13104-2-philmd@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
It turns out there are some 64 bit systems that have relatively low
amounts of physical memory available to them (typically CI system).
Even with swapping available a 1GB translation buffer that fills up
can put the machine under increased memory pressure. Detect these low
memory situations and reduce tb_size appropriately.
Fixes: 600e17b261 ("accel/tcg: increase default code gen buffer size for 64 bit")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200724064509.331-7-alex.bennee@linaro.org>
I missed Emilio's review comments:
Message-ID: <20200718205107.GA994221@sff>
and the patch got merged. Correcting the comments now.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200720122358.26881-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When single-stepping with a debugger attached to QEMU, and when an
interrupt is raised, the debugger misses the first instruction after
the interrupt.
Tested-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/757702
Message-Id: <20200717163029.2737546-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When single-stepping with a debugger attached to QEMU, and when an
exception is raised, the debugger misses the first instruction after the
exception:
$ qemu-system-aarch64 -M virt -display none -cpu cortex-a53 -s -S
$ aarch64-linux-gnu-gdb
GNU gdb (GDB) 9.2
[...]
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x0000000000000000 in ?? ()
(gdb) # writing nop insns to 0x200 and 0x204
(gdb) set *0x200 = 0xd503201f
(gdb) set *0x204 = 0xd503201f
(gdb) # 0x0 address contains 0 which is an invalid opcode.
(gdb) # The CPU should raise an exception and jump to 0x200
(gdb) si
0x0000000000000204 in ?? ()
With this commit, the same run steps correctly on the first instruction
of the exception vector:
(gdb) si
0x0000000000000200 in ?? ()
Buglink: https://bugs.launchpad.net/qemu/+bug/757702
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200716193947.3058389-1-luc.michel@greensocs.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Any write to a device might cause a re-arrangement of memory
triggering a TLB flush and potential re-size of the TLB invalidating
previous entries. This would cause users of qemu_plugin_get_hwaddr()
to see the warning:
invalid use of qemu_plugin_get_hwaddr
because of the failed tlb_lookup which should always succeed. To
prevent this we save the IOTLB data in case it is later needed by a
plugin doing a lookup.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200713200415.26214-7-alex.bennee@linaro.org>
The TCG helpers were added in b92e5a22ec in softmmu_template.h.
probe_write() was added in there in 3b4afc9e75 to be moved out
to accel/tcg/cputlb.c in 3b08f0a925, and was later refactored
as probe_access() in c25c283df0.
Since it is a TCG specific helper, add a stub to avoid failures
when building without TCG, such:
target/arm/helper.o: In function `probe_read':
include/exec/exec-all.h:362: undefined reference to `probe_access'
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the CONFIG_TCG selector to let minikconf.py uses it.
When building with --disable-tcg build, this helps to deselect
devices that are TCG-dependent.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the accel selectors from the global Kconfig.host to their
own Kconfig file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit used Coccinelle to convert from checking the Error
object to checking the return value. Convert a few more manually.
Also tweak control flow in places to conform to the conventional "if
error bail out" pattern.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-20-armbru@redhat.com>
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
Discarding memory does not work as expected. At the time this is called,
we cannot have anyone active that relies on discards to work properly.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road. At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html
Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).
However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants. By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.
Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).
I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use. As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:
Use of MIN when MIN_CONST is needed:
In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
249 | ({ \
| ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
92 | char array[MIN(1, 2)] = "";
| ^~~
Use of MIN_CONST when MIN is needed:
/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
1225 | i = MIN_CONST(i, n);
| ^
Use of MIN in the preprocessor:
In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
249 | ({ \
| ^
Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros. cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.
It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced in the
kernel, tweak the userspace side to detect and enable this
capability.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200304025554.2159-1-jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The radix tree is append-only, but we can fail to insert
a PageDesc if the insertion races with another thread.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-8-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-11-alex.bennee@linaro.org>
