When running the official PMON firmware for the Fuloong 2E, we see
8-bit and 16-bit accesses to PCI config space:
$ qemu-system-mips64el -M fuloong2e -bios pmon_2e.bin \
-trace -trace bonito\* -trace pci_cfg\*
pci_cfg_write vt82c686b-pm 05:4 @0x90 <- 0xeee1
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x4d2, size: 2
pci_cfg_write vt82c686b-pm 05:4 @0xd2 <- 0x1
pci_cfg_write vt82c686b-pm 05:4 @0x4 <- 0x1
pci_cfg_write vt82c686b-isa 05:0 @0x4 <- 0x7
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
pci_cfg_read vt82c686b-isa 05:0 @0x81 -> 0x0
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x81, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x81 <- 0x80
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x83, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x83 <- 0x89
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x3
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x5a, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x5a <- 0x7
bonito_spciconf_small_access PCI config address is smaller then 32-bit, addr: 0x85, size: 1
pci_cfg_write vt82c686b-isa 05:0 @0x85 <- 0x1
Also this is what the Linux kernel does since it supports the Bonito
north bridge:
https://elixir.bootlin.com/linux/v2.6.15/source/arch/mips/pci/ops-bonito64.c#L85
So it seems safe to assume the datasheet is incomplete or outdated
regarding the address constraints.
This problem was exposed by commit 911629e6d3
("vt82c686: Fix SMBus IO base and configuration registers").
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210624202747.1433023-4-f4bug@amsat.org>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Per the datasheet section "5.7.5. Accessing PCI configuration space"
the address must be 32-bit aligned. Trace eventual accesses not
aligned to 32-bit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210624202747.1433023-3-f4bug@amsat.org>
Extract 4900 lines from the huge translate.c to a new file,
'nanomips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
Extract 3200+ lines from the huge translate.c to a new file,
'micromips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>
Extract 1100+ lines from the huge translate.c to a new file,
'mips16e_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>
We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.
We will first extract this code as included source files (.c.inc),
then make them new compilation units afterward.
The following methods are going to be used externally:
micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd);
micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ...
micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ...
mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ...
To avoid too much code churn, it is simpler to declare these
prototypes in "translate.h" now.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>
This patch *doesn't* update all of the docstring standards across the
QEMU package directory to make our docstring usage consistent. It
*doesn't* fix the formatting to make it look pretty or reasonable in
generated output. It *does* fix a few small instances where Sphinx would
emit a build warning because of malformed ReST -- If we built our Python
docs with Sphinx.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
For reasons that at-present escape me, pipenv insists on creating a stub
pyproject.toml file. This file is a nuisance, because its mere presence
changes the behavior of various tools.
For instance, this stub file will cause "pip install --user -e ." to
fail in spectacular fashion with misleading errors. "pip install -e ."
works okay, but for some reason pip does not support editable installs
to the user directory when using PEP517.
References:
https://github.com/pypa/pip/pull/9990https://github.com/pypa/pip/issues/7953
As outlined in ea1213b7cc, it is still too early for us to consider
moving to a PEP-517 exclusive package. We must support older
distributions, so squash the annoyance for now. (Python 3.6 shipped Dec
2016, PEP517 support showed up in pip sometime in 2019 or so.)
Add 'pyproject.toml' to the 'make clean' target, and also delete it
after every pipenv invocation issued by the Makefile.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update for visual parity with all the remaining targets.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update for visual parity with the other targets.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is a *third* way to run the Python tests. Unlike the first two
(check-pipenv, check-tox), this version does not require any specific
interpreter version -- making it a lot easier to tell people to run it
as a quick smoketest prior to submission to GitLab CI.
Summary:
Checked via GitLab CI:
- check-pipenv: tests our oldest python & dependencies
- check-tox: tests newest dependencies on all non-EOL python versions
Executed only incidentally:
- check-dev: tests newest dependencies on whichever python version
('make check' does not set up any environment at all, it just runs the
tests in your current environment. All four invocations perform the
exact same tests, just in different execution environments.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-12-jsnow@redhat.com
[Maintainer edit: added .dev-venv/ to .gitignore. --js]
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I missed the 'check-tox' target. Add that, but split the large .PHONY
specifier at the top into its component pieces and move them near the
targets they describe so that they're much harder to forget to update.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move it up near the check-pipenv help text, and update it to suggest parity.
(At the time I first added it, I wasn't sure if I would be keeping it,
but I've come to appreciate it as it has actually helped uncover bugs I
would not have noticed without it. It should stay.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Well, Cleber was right, this is a better name.
In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.
Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.
Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's not encouraged, but it's legitimate to want to know how to do.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Clarifying a few points; removing the reference to 'setuptools' because
it isn't referenced anywhere else in this document and doesn't really
provide any useful information to a Python newcomer.
Adjusting the language elsewhere to be less ambiguous and have fewer
run-on sentences.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.
The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.
Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.
(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Pylint updated to 2.9.0 upstream, adding new warnings for things that
re-use the 'err' variable. Luckily, this only breaks the
python-check-tox job, which is allowed to fail as a warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmDbap8ACgkQTeGvMW1P
Denz9wf9GtU4z7G0pQpFlv1smWPvQfv9qlkGiRvGcIQjEgPjcKjEsJC1CqtG6nZ5
BGYzey706iM7NAs6wPkyUyHgWXl+N/Ku5nNBvNJuzTN5J9aHgnqehe8civvS6ONU
0WtAQEEZCLu0Qbvw6KawCShXrJ6Jpmu+bYGggYEy5+baumLF0Qj50l2wRiDbImNu
rE3iZuhEenwnNNSTTkyt2RT8lSzizAtth4bAqzl3Zw1Q3NO+qDCL0wPOWD7YuD8p
LTZ8/ojB1+YUI3JrMM4MlzbJyGstdk2Y5zq6QpAcf86agaaFEmS0iqjOic52ImpL
VzmZZZ0W7kmhJVc5H/Q5y/KAFIHnFA==
=efjI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging
hw/nvme patches
* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)
# gpg: Signature made Tue 29 Jun 2021 19:46:55 BST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* remotes/nvme/tags/nvme-next-pull-request: (23 commits)
hw/nvme: add 'zoned.zasl' to documentation
hw/nvme: fix pin-based interrupt behavior (again)
hw/nvme: fix missing check for PMR capability
hw/nvme: documentation fix
hw/nvme: fix endianess conversion and add controller list
Partially revert "hw/block/nvme: drain namespaces on sq deletion"
hw/nvme: reimplement format nvm to allow cancellation
hw/nvme: reimplement zone reset to allow cancellation
hw/nvme: reimplement the copy command to allow aio cancellation
hw/nvme: add dw0/1 to the req completion trace event
hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_check
hw/nvme: remove assert from nvme_get_zone_by_slba
hw/nvme: save reftag when generating pi
hw/nvme: reimplement dsm to allow cancellation
hw/nvme: add nvme_block_status_all helper
hw/nvme: reimplement flush to allow cancellation
hw/nvme: default for namespace EUI-64
hw/nvme: namespace parameter for EUI-64
hw/nvme: fix csi field for cns 0x00 and 0x11
hw/nvme: add param to control auto zone transitioning to zone state closed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TCG_TARGET_HAS_MEMORY_BSWAP is already unset for this backend,
which means that MO_BSWAP be handled by the middle-end and
will never be seen by the backend. Thus the indexes used with
qemu_{ld,st}_helpers will always be zero.
Tidy the comments and asserts in tcg_out_qemu_{ld,st}_direct.
It is not that we do not handle bswap "yet", but never will.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory bswap support in the aarch64 backend merely dates from
a time when it was required. There is nothing special about the
backend support that could not have been provided by the middle-end
even prior to the introduction of the bswap flags.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the middle-end can replicate the same tricks as tcg/arm
used for optimizing bswap for signed loads and for stores, do not
pretend to have these memory ops in the backend.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were two bugs here: (1) the required endianness was
not present in the MemOp, and (2) we were not providing a
zero-extended input to the bswap as semantics required.
The best fix is to fold the bswap into the memory operation,
producing the desired result directly.
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove TCG_BSWAP_IZ and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a break instead of an ifdefed else.
There's no need to move the values through s->T0.
Remove TCG_BSWAP_IZ and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The new bswap flags can implement the semantics exactly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can eliminate the requirement for a zero-extended output,
because the following store will ignore any garbage high bits.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For the sf version, we are performing two 32-bit bswaps
in either half of the register. This is equivalent to
performing one 64-bit bswap followed by a rotate.
For the non-sf version, we can remove TCG_BSWAP_IZ
and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By removing TCG_BSWAP_IZ we indicate that the input is
not zero-extended, and thus can remove an explicit extend.
By removing TCG_BSWAP_OZ, we allow the implementation to
leave high bits set, which will be ignored by the store.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can perform any required sign-extension via TCG_BSWAP_OS.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice when the input is known to be zero-extended and force
the TCG_BSWAP_IZ flag on. Honor the TCG_BSWAP_OS bit during
constant folding. Propagate the input to the output mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The existing interpreter zero-extends, ignoring high bits.
Simply add a separate sign-extension opcode if required.
Ensure that the interpreter supports ext16s when bswap16 is enabled.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap32 and tcg_out_bswap32s.
Use the flags in the internal uses for loads and stores.
For mips32r2 bswap32 with zero-extension, standardize on
WSBH+ROTR+DEXT. This is the same number of insns as the
previous DSBH+DSHD+DSRL but fits in better with the flags check.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap16 and tcg_out_bswap16s. Use the flags
in the internal uses for loads and stores.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For INDEX_op_bswap16_i64, use 64-bit instructions so that we can
easily provide the extension to 64-bits. Drop the special case,
previously used, where the input is already zero-extended -- the
minor code size savings is not worth the complication.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For INDEX_op_bswap32_i32, pass 0 for flags: input not zero-extended,
output does not need extension within the host 64-bit register.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the use of a suitable temporary, we can use the same
algorithm when src overlaps dst. The result is the same
number of instructions either way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly require sari in other context;
split out both for cleanliness sake.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly require these in other context;
make the expansion as clear as possible.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
