vga_mmio_init() is used only one time and not very helpful,
inline and remove it.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce TYPE_VGA_MMIO, a sysbus device.
While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise we run the error handling code even for successful requests.
Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
Quote from:
High Definition Audio Specification 1.0a, section 3.3.35
Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.
Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.
[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Add SDHC support for SD card SPI-mode (Frank Chang)
-----BEGIN PGP SIGNATURE-----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=PEEr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging
SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20220108:
hw/sd: Add SDHC support for SD card SPI-mode
hw/sd/sdcard: Rename Write Protect Group variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 316011b8a7.
Fixes: 316011b8a7 ("virtio-pci: decouple the single vector from the interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 634f7c89fb.
Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 081f864f56.
Fixes: 081f864f56 ("virtio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f7220a7ce2.
Fixes: f7220a7ce2 ("vhost: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 497679d510.
Fixes: 497679d510 ("virtio-net: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit d48185f1a4.
Fixes: d48185f1a4 ("virtio-mmio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit d5d24d859c.
Fixes: d5d24d859c ("virtio-pci: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The macfb VRAM memory region was configured with coalescing rather than dirty
memory logging enabled, causing some areas of the screen not to redraw after
a full screen update.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108164147.30813-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"qemu-system-m68k -M q800 -bios /dev/null" crashes with a segfault
in q800_init().
This happens because the code doesn't check that rom_ptr() returned
a non-NULL pointer .
To avoid NULL pointer, don't allow 0 sized file and use bios_size with
rom_ptr().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/756
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220107105049.961489-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When realising the SoC use error_fatal instead of error_abort as the
process can fail and report useful information to the user.
Currently a user can see this:
$ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
QEMU 6.1.93 monitor - type 'help' for more information
(qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
qemu-system-riscv64: OTP drive size < 16K
Aborted (core dumped)
Which this patch addresses
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-8-alistair.francis@opensource.wdc.com>
We can remove the original sifive_plic_irqs_pending() function and
instead just use the sifive_plic_claim() function (renamed to
sifive_plic_claimed()) to determine if any interrupts are pending.
This requires move the side effects outside of sifive_plic_claimed(),
but as they are only invoked once that isn't a problem.
We have also removed all of the old #ifdef debugging logs, so let's
cleanup the last remaining debug function while we are here.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-5-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-4-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-2-alistair.francis@opensource.wdc.com>
It's obvious that PDMA supports 64-bit access of 64-bit registers, and
in previous commit, we confirm that PDMA supports 32-bit access of
both 32/64-bit registers. Thus, we configure 32/64-bit memory access
of PDMA registers as valid in general.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20220104063408.658169-3-jim.shu@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
New virtio mem options.
A vhost-user cleanup.
Control over smbios entry point type.
Config interrupt support for vdpa.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHY2zEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpCiEH/jv5tHUffDdGz5M2pN7FTWPQ9UAMQZXbn5AS
PPVutOI/B+ILYBuNjYLvMGeq6ymG4/0DM940/jkQwCWD4ku1OG0ReM5T5klUR8lY
df5y1SCDv3Yoq0vxpQCnssKqbgm8Kf9tnAFjni7Lvbu3oo6DCq77m6MWEapLoEUu
IkM+l60NKmHAClnE6RF4KobLa5srIlDTho1iBXH5S39CRF1LvP9NgnYzl7nqiEkq
ZYQEqkKO5XGxZji9banZPJD2kxt1iL7s24QI6OJG2Lz8Hf86b0Yo7XJpmw4ShP9h
Vl1SL3m/HhHSMBuXOb7w/EkCm59b7whXCmoyYBF/GqaxtZkvVnM=
=4VIN
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes,cleanups
New virtio mem options.
A vhost-user cleanup.
Control over smbios entry point type.
Config interrupt support for vdpa.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 07 Jan 2022 04:30:41 PM PST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (55 commits)
tests: acpi: Add updated TPM related tables
acpi: tpm: Add missing device identification objects
tests: acpi: prepare for updated TPM related tables
virtio/vhost-vsock: don't double close vhostfd, remove redundant cleanup
hw/scsi/vhost-scsi: don't double close vhostfd on error
hw/scsi/vhost-scsi: don't leak vqs on error
docs: reSTify virtio-balloon-stats documentation and move to docs/interop
hw/i386/pc: Add missing property descriptions
acpihp: simplify acpi_pcihp_disable_root_bus
tests: acpi: SLIC: update expected blobs
tests: acpi: add SLIC table test
tests: acpi: whitelist expected blobs before changing them
acpi: fix QEMU crash when started with SLIC table
intel-iommu: correctly check passthrough during translation
virtio-mem: Set "unplugged-inaccessible=auto" for the 7.0 machine on x86
virtio-mem: Support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
linux-headers: sync VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
MAINTAINERS: Add a separate entry for acpi/VIOT tables
virtio: signal after wrapping packed used_idx
virtio-mem: Support "prealloc=on" option
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add missing TPM device identification objects _STR and _UID. They will
appear as files 'description' and 'uid' under Linux sysfs.
Following inspection of sysfs entries for hardware TPMs we chose
uid '1'.
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/708
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com>
Message-id: 20211223022310.575496-3-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-3-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
In case of an error during initialization in vhost_dev_init, vhostfd is
closed in vhost_dev_cleanup. Remove close from err_virtio as it's both
redundant and causes a double close on vhostfd.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129125204.1108088-1-d-tatianin@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init calls vhost_dev_cleanup on error, which closes vhostfd,
don't double close it.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-2-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init calls vhost_dev_cleanup in case of an error during
initialization, which zeroes out the entire vsc->dev as well as the
vsc->dev.vqs pointer. This prevents us from properly freeing it in free_vqs.
Keep a local copy of the pointer so we can free it later.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-1-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running "qemu-system-x86_64 -M pc,help" I noticed that some
properties were still missing their description. Add them now so
that users get at least a slightly better idea what they are all
about.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206134255.94784-1-thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of the static variable that keeps track of whether hotplug has been
disabled on the root pci bus. Simply use qbus_is_hotpluggable() api to
perform the same check. This eliminates additional if conditional and
simplifies the function.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1640764674-7784-1-git-send-email-ani@anirban.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
if QEMU is started with used provided SLIC table blob,
-acpitable sig=SLIC,oem_id='CRASH ',oem_table_id="ME",oem_rev=00002210,asl_compiler_id="",asl_compiler_rev=00000000,data=/dev/null
it will assert with:
hw/acpi/aml-build.c:61:build_append_padded_str: assertion failed: (len <= maxlen)
and following backtrace:
...
build_append_padded_str (array=0x555556afe320, str=0x555556afdb2e "CRASH ME", maxlen=0x6, pad=0x20) at hw/acpi/aml-build.c:61
acpi_table_begin (desc=0x7fffffffd1b0, array=0x555556afe320) at hw/acpi/aml-build.c:1727
build_fadt (tbl=0x555556afe320, linker=0x555557ca3830, f=0x7fffffffd318, oem_id=0x555556afdb2e "CRASH ME", oem_table_id=0x555556afdb34 "ME") at hw/acpi/aml-build.c:2064
...
which happens due to acpi_table_begin() expecting NULL terminated
oem_id and oem_table_id strings, which is normally the case, but
in case of user provided SLIC table, oem_id points to table's blob
directly and as result oem_id became longer than expected.
Fix issue by handling oem_id consistently and make acpi_get_slic_oem()
return NULL terminated strings.
PS:
After [1] refactoring, oem_id semantics became inconsistent, where
NULL terminated string was coming from machine and old way pointer
into byte array coming from -acpitable option. That used to work
since build_header() wasn't expecting NULL terminated string and
blindly copied the 1st 6 bytes only.
However commit [2] broke that by replacing build_header() with
acpi_table_begin(), which was expecting NULL terminated string
and was checking oem_id size.
1) 602b45820 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
2)
Fixes: 4b56e1e4eb ("acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/786
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-2-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Denis Lisov <dennis.lissov@gmail.com>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When scalable mode is enabled, the passthrough more is not determined
by the context entry but PASID entry, so switch to use the logic of
vtd_dev_pt_enabled() to determine the passthrough mode in
vtd_do_iommu_translate().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220105041945.13459-2-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set the new default to "auto", keeping it set to "off" for compat
machines. This property is only available for x86 targets.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we signal the VM that reading
unplugged memory is not supported. We have to fail feature negotiation
in case the guest does not support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.
First, VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE is required to properly handle
memory backends (or architectures) without support for the shared zeropage
in the hypervisor cleanly. Without the shared zeropage, even reading an
unpopulated virtual memory location can populate real memory and
consequently consume memory in the hypervisor. We have a guaranteed shared
zeropage only on MAP_PRIVATE anonymous memory.
Second, we want VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE to be the default
long-term as even populating the shared zeropage can be problematic: for
example, without THP support (possible) or without support for the shared
huge zeropage with THP (unlikely), the PTE page tables to hold the shared
zeropage entries can consume quite some memory that cannot be reclaimed
easily.
Third, there are other optimizations+features (e.g., protection of
unplugged memory, reducing the total memory slot size and bitmap sizes)
that will require VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE.
We really only support x86 targets with virtio-mem for now (and
Linux similarly only support x86), but that might change soon, so prepare
for different targets already.
Add a new "unplugged-inaccessible" tristate property for x86 targets:
- "off" will keep VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE unset and legacy
guests working.
- "on" will set VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE and stop legacy guests
from using the device.
- "auto" selects the default based on support for the shared zeropage.
Warn in case the property is set to "off" and we don't have support for the
shared zeropage.
For existing compat machines, the property will default to "off", to
not change the behavior but eventually warn about a problematic setup.
Short-term, we'll set the property default to "auto" for new QEMU machines.
Mid-term, we'll set the property default to "on" for new QEMU machines.
Long-term, we'll deprecate the parameter and disallow legacy
guests completely.
The property has to match on the migration source and destination. "auto"
will result in the same VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE setting as long
as the qemu command line (esp. memdev) match -- so "auto" is good enough
for migration purposes and the parameter doesn't have to be migrated
explicitly.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134039.29670-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Packed Virtqueues wrap used_idx instead of letting it run freely like
Split Virtqueues do. If the used ring wraps more than once there is no
way to compare vq->signalled_used and vq->used_idx in
virtio_packed_should_notify() since they are modulo vq->vring.num.
This causes the device to stop sending used buffer notifications when
when virtio_packed_should_notify() is called less than once each time
around the used ring.
It is possible to trigger this with virtio-blk's dataplane
notify_guest_bh() irq coalescing optimization. The call to
virtio_notify_irqfd() (and virtio_packed_should_notify()) is deferred to
a BH. If the guest driver is polling it can complete and submit more
requests before the BH executes, causing the used ring to wrap more than
once. The result is that the virtio-blk device ceases to raise
interrupts and I/O hangs.
Cc: Tiwei Bie <tiwei.bie@intel.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211130134510.267382-1-stefanha@redhat.com>
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For scarce memory resources, such as hugetlb, we want to be able to
prealloc such memory resources in order to not crash later on access. On
simple user errors we could otherwise easily run out of memory resources
an crash the VM -- pretty much undesired.
For ordinary memory devices, such as DIMMs, we preallocate memory via the
memory backend for such use cases; however, with virtio-mem we're dealing
with sparse memory backends; preallocating the whole memory backend
destroys the whole purpose of virtio-mem.
Instead, we want to preallocate memory when actually exposing memory to the
VM dynamically, and fail plugging memory gracefully + warn the user in case
preallocation fails.
A common use case for hugetlb will be using "reserve=off,prealloc=off" for
the memory backend and "prealloc=on" for the virtio-mem device. This
way, no huge pages will be reserved for the process, but we can recover
if there are no actual huge pages when plugging memory. Libvirt is
already prepared for this.
Note that preallocation cannot protect from the OOM killer -- which
holds true for any kind of preallocation in QEMU. It's primarily useful
only for scarce memory resources such as hugetlb, or shared file-backed
memory. It's of little use for ordinary anonymous memory that can be
swapped, KSM merged, ... but we won't forbid it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211217134611.31172-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the four lm75s behind the mux on bus 13.
Tested by booting the firmware:
lm75 42-0048: hwmon0: sensor 'lm75'
lm75 43-0049: supply vs not found, using dummy regulator
lm75 43-0049: hwmon1: sensor 'lm75'
lm75 44-0048: supply vs not found, using dummy regulator
lm75 44-0048: hwmon2: sensor 'lm75'
lm75 45-0049: supply vs not found, using dummy regulator
lm75 45-0049: hwmon3: sensor 'lm75'
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220102215844.2888833-5-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In several places we have a local variable max_l2_entries which is
the number of entries which will fit in a level 2 table. The
calculations done on this value are correct; rename it to
num_l2_entries to fit the convention we're using in this code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The ITS code has to check whether various parameters passed in
commands are in-bounds, where the limit is defined in terms of the
number of bits that are available for the parameter. (For example,
the GITS_TYPER.Devbits ID register field specifies the number of
DeviceID bits minus 1, and device IDs passed in the MAPTI and MAPD
command packets must fit in that many bits.)
Currently we have off-by-one bugs in many of these bounds checks.
The typical problem is that we define a max_foo as 1 << n. In
the Devbits example, we set
s->dt.max_ids = 1UL << (GITS_TYPER.Devbits + 1).
However later when we do the bounds check we write
if (devid > s->dt.max_ids) { /* command error */ }
which incorrectly permits a devid of 1 << n.
These bugs will not cause QEMU crashes because the ID values being
checked are only used for accesses into tables held in guest memory
which we access with address_space_*() functions, but they are
incorrect behaviour of our emulation.
Fix them by standardizing on this pattern:
* bounds limits are named num_foos and are the 2^n value
(equal to the number of valid foo values)
* bounds checks are either
if (fooid < num_foos) { good }
or
if (fooid >= num_foos) { bad }
In this commit we fix the handling of the number of IDs
in the device table and the collection table, and the number
of commands that will fit in the command queue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Use FIELD macros to handle CTEs, rather than ad-hoc mask-and-shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The comment says that in our CTE format the RDBase field is 36 bits;
in fact for us it is only 16 bits, because we use the RDBase format
where it specifies a 16-bit CPU number. The code already uses
RDBASE_PROCNUM_LENGTH (16) as the field width, so fix the comment
to match it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé
Gerd Hoffmann
Volker Rümelin
zhenwei pi
Dario Binacchi
Peter Maydell
Michael S. Tsirkin
Mark Cave-Ayland
Laurent Vivier
Alistair Francis
Jim Shu
Richard Henderson
Stefan Berger
Daniil Tatianin
Thomas Huth
Ani Sinha
Igor Mammedov
Jason Wang
David Hildenbrand
Stefan Hajnoczi
Patrick Venture
Shengtan Mao
Chris Rauer