UEFI on ia32 never really took off. Basically the BIOS -> UEFI shift
came too late, x64 was widespread already, so vendors went from BIOS
straight to UEFI on x64.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
master snapshot, most recent commit from Aug 23th
shortlog
========
Andrew Grasso (1):
[intel] Add INTEL_NO_PHY_RST for I218LM
Ben Bleything (1):
[intel] Set INTEL_NO_PHY_RST on i218v
Bobby Lockwood (1):
[libgcc] Change __divmoddi4 from int64 [unknown] to int64_t
Bruce Rogers (1):
[build] Be explicit about -fcommon compiler directive
Christian Nilsson (1):
[intel] Add PCI ID for I219-V and -LM 6 to 9
Daniel Johnson (1):
[deflate] Fix typo in comment describing length codes
David Decotigny (2):
[pcbios] Fix "out of memory" detection when expanding bottom area
[pcbios] Take alignment into account when checking for available space
Dentcho Ludmilov Bankov (1):
[comboot] Fix stack pointer retrieval after COM32 binary returns
Ignat Korchagin (3):
[snp] Try promiscuous multicast receive filter if the regular one fails
[snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec
[efi] Check the status code from AllocatePool()
Joe Groocock (1):
[cmdline] Add "--timeout" parameter to "ifconf" command
Joseph Wong (1):
[bnxt] Add driver support for Broadcom NetXtreme-E Adapters
LaDerrick H (1):
[sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140
Michael Brown (105):
[init] Show startup and shutdown function names in debug messages
[efi] Blacklist the Dell Ip4ConfigDxe driver
[tls] Support stateful session resumption
[tls] Fix incorrectly duplicated error number
[tls] Support stateless session resumption
[crypto] Use x509_name() in validator debug messages
[tls] Display cross-certificate and OCSP status messages
[tls] Display validator messages only while validation is in progress
[tcp] Display "connecting" status until connection is established
[ocsp] Accept response certID with missing hashAlgorithm parameters
[pci] Add support for PCI MSI-X interrupts
[vlan] Provide vlan_netdev_rx() and vlan_netdev_rx_err()
[intelxl] Use VLAN tag in receive descriptor if present
[intelxl] Allow for virtual function admin queue register maps
[intelxl] Use one admin queue buffer per admin queue descriptor
[intelxl] Allow admin queues to be reinitialised
[intelxl] Allow admin cookie to hold extended opcode and return code
[intelxl] Provide a mechanism for handling "send to VF" events
[intelxl] Use 32-byte receive descriptors
[intelxl] Allow for arbitrary placement of ring tail registers
[intelxl] Split out ring creation from context programming
[intelxl] Allow for arbitrary placement of interrupt control register
[intelxl] Expose functions required by virtual function driver
[intelxl] Choose to operate in non-PXE mode
[intelxl] Add driver for Intel 40 Gigabit Ethernet NIC virtual functions
[build] Fix use of inline assembly on GCC 8 ARM64 builds
[arm] Provide dummy implementations for {in,out}[s]{b,w,l}
[efi] Return only registered EFI devices from efidev_parent()
[fdt] Add ability to parse a MAC address from a flattened device tree
[efi] Register a device tree if provided by the platform firmware
[smsc95xx] Fetch MAC from device tree for Raspberry Pi
[build] Add named configuration for Raspberry Pi
[smscusb] Fetch MAC from device tree for Raspberry Pi Model B+
[build] Do not apply WORKAROUND_CFLAGS for host compiler
[build] Move predefined all-drivers build shortcut to Makefile
[build] Add predefined shortcut for Raspberry Pi builds
[process] Add PROC_INIT() for initialising static processes
[peerdist] Start block download timers from within opener methods
[peerdist] Limit number of concurrent raw block downloads
[tls] Add missing call to tls_tx_resume() when restarting negotiation
[crypto] Drag in configured digestInfo prefixes for any use of RSA
[crypto] Profile the various stages of modular multiplication
[coverity] Override assumptions about wcrtomb() and hmac_init()
[ethernet] Avoid false positive Coverity warning
[golan] Fix address-of-pointer bug for multicast attach/detach
[efi] Report failed control transfers as expected by the USB core
[efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown
[lan78xx] Always enable automatic speed and duplex detection
[peerdist] Allow PeerDist to be globally enabled or disabled
[peerdist] Allow for the use of a hosted cache server
[build] Construct full version number automatically from git revision
[travis] Ensure that most recent tag is always available
[tftp] Eliminate unnecessary variable-length stack allocation
[infiniband] Eliminate variable-length stack allocation
[slam] Eliminate variable-length stack allocation
[slam] Allow for the possibility of IPv6 multicast addresses
[settings] Eliminate variable-length stack allocation
[iscsi] Eliminate variable-length stack allocations in CHAP handlers
[iscsi] Eliminate variable-length stack allocation in URI parsing
[bios] Define macros for constructing partition table entries
[int13con] Create log partition only when CONSOLE_INT13 is enabled
[efi] Disambiguate errors returned by ConnectController
[png] Fix potential integer overflow
[efi] Work around UEFI specification bug in LoadImage
[efi] Work around UEFI specification bug in LoadImage for SAN boot
[uri] Avoid appearing to access final byte of a potentially empty string
[efi] Attempt to connect our driver directly if ConnectController fails
[tls] Allow a minimum TLS protocol version to be specified
[tls] Default to supporting only TLSv1.1 or above
[crypto] Allow algorithms to be included without being OID-identifiable
[crypto] Ensure that test code drags in required ASN.1 object identifiers
[crypto] Disable MD5 as an OID-identifiable algorithm by default
[snp] Retry initialisation if link is reported as down
[util] Treat empty integer strings as invalid
[parseopt] Treat empty integer strings in user input as invalid
[efi] Enable stack protection where possible
[ocsp] Accept SHA1 certID responses even if SHA1 is not enabled
[intel] Avoid spurious compiler warning on GCC 10
[golan] Add explicit type casts for nodnic_queue_pair_type
[build] Disable position-independent code for ARM64 EFI builds
[efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations
[efi] Raise TPL during driver entry point
[axge] Handle non-gigabit link speeds
[usb] Clear device endpoint halt before resetting host endpoint
[usb] Add missing usb_recycle() for completed hub interrupt transfers
[usb] Do not attempt to disable USB3 hub ports
[xhci] Set link state to RxDetect after disabling USB3 root hub port
[usb] Avoid unnecessary calls to usb_hub_set_drvdata()
[xhci] Increase link state settling delay to 100ms
[axge] Reapply USB device configuration when opening network device
[usb] Leave port enabled after a failed device registration
[crypto] Avoid temporarily setting direction flag in bigint_is_geq()
[libc] Provide an unoptimised generic_memcpy_reverse()
[efi] Avoid setting direction flag on EFI platforms
[libc] Add bit-rotation functions for unsigned long values
[efi] Distribute available entropy within stack cookie
[efi] Ensure NUL byte is at lowest address within stack cookie
[efi] Claim SNP devices early in efi_download_start()
[xfer] Remove address family from definition of a socket opener
[dns] Use all configured DNS servers
[wpa] Fix erroneous debug message in wpa_derive_ptk
[efi] Match EDK2 numbering for USB ports
[efi] Use device path to locate filesystem from which we were loaded
[efi] Attempt NII initialisation both with and without cable detection
[build] Fix building on older versions of gcc
Michael J. Bazzinotti (1):
[libc] Fix memcmp() to return proper values
Mohammed (1):
[golan] Add various new PCI device IDs
Rob Taglang (1):
[intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs
Tobias Kortkamp (1):
[build] Fix a GNUism that FreeBSD's sed(1) cannot deal with
Valentine Barshak (2):
[build] Fix "'%s' directive argument is null" error
[build] Workaround compilation error with gcc 9.1
bit (1):
[build] Fix default target in sdsk image
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Changes:
* If only one bootable device is available, boot from it.
* Silence PDC warnings with HP-UX 11.11
* Inform Linux about fw_cfg port addresses
* Make power switch button configurable from qemu
* Clear screen on machine reset
* Add fw_cfg option to enable runtime debug info
* Fix panic on OpenBSD/6.7 regarding STI console
* Set text planes and used_bits in STI fields
* Fix mon_tbl entries
* Convert sti_region_list to an initialized struct
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX0bPowAKCRD3ErUQojoP
X43sAPwP4Prb0NQTw68l5oSwOoIcuWb4GZBjxOPecDis/0K2ogD/WswDJ8qk3RAQ
7XYGY8LuMdhwfcsx15TsuB/HAUie3QM=
=wIGS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging
artist out of bounds fixes
# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-v3-pull-request:
hw/display/artist: Fix invalidation of lines near screen border
hw/display/artist: Fix invalidation of lines in artist_draw_line()
hw/display/artist: Unbreak size mismatch memory accesses
hw/display/artist: Prevent out of VRAM buffer accesses
Revert "hw/display/artist: Avoid drawing line when nothing to display"
hw/display/artist: Refactor artist_rop8() to avoid buffer over-run
hw/display/artist: Check offset in draw_line to avoid buffer over-run
hw/hppa/lasi: Don't abort on invalid IMR value
hw/display/artist.c: fix out of bounds check
hw/hppa: Implement proper SeaBIOS version check
seabios-hppa: Update to SeaBIOS hppa version 1
hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RISC-V generic platform is a flattened device tree (FDT) based
platform where all platform specific functionality is provided based
on FDT passed by previous booting stage. The support was added in
the upstream OpenSBI v0.8 release recently.
Update our Makefile to build the generic platform instead of building
virt and sifive_u separately for RISC-V OpenSBI firmware, and change
to use fw_dynamic type images as well.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upgrade OpenSBI from v0.7 to v0.8.
The v0.8 release includes the following commits:
1bb00ab lib: No need to provide default PMP region using platform callbacks
a9eac67 include: sbi_platform: Combine reboot and shutdown into one callback
6585fab lib: utils: Add SiFive test device
4781545 platform: Add Nuclei UX600 platform
3a326af scripts: adapt binary archive script for Nuclei UX600
5bdf022 firmware: fw_base: Remove CSR_MTVEC update check
e6c1345 lib: utils/serial: Skip baudrate config if input frequency is zero
01a8c8e lib: utils: Improve fdt_parse_uart8250() API
0a0093b lib: utils: Add fdt_parse_uart8250_node() function
243b0d0 lib: utils: Remove redundant clint_ipi_sync() declaration
e3ad7c1 lib: utils: Rename fdt_parse_clint() to fdt_parse_compat_addr()
a39cd6f lib: utils: Add FDT match table based node lookup
dd33b9e lib: utils: Make fdt_get_node_addr_size() public function
66185b3 lib: utils: Add fdt_parse_sifive_uart_node() function
19e966b lib: utils: Add fdt_parse_hart_id() function
44dd7be lib: utils: Add fdt_parse_max_hart_id() API
f0eb503 lib: utils: Add fdt_parse_plic_node() function
1ac794c include: Add array_size() macro
8ff2b94 lib: utils: Add simple FDT timer framework
76f0f81 lib: utils: Add simple FDT ipi framework
75322a6 lib: utils: Add simple FDT irqchip framework
76a8940 lib: utils: Add simple FDT serial framework
7cc6fa4 lib: utils: Add simple FDT reset framework
4d06353 firmware: fw_base: Introduce optional fw_platform_init()
f1aa9e5 platform: Add generic FDT based platform support
1f21b99 lib: sbi: Print platform hart count at boot time
2ba7087 scripts: Add generic platform to create-binary-archive.sh
4f18c6e platform: generic: Add Sifive FU540 TLB flush range limit override
13717a8 platform: Remove qemu/virt directory
65c06b0 platform: Remove spike directory
d626037 docs: Add missing links in platform.md
7993ca2 include: sbi: Remove redundant page table related defines
5338679 lib: sbi_tlb: Fix remote TLB HFENCE VVMA implementation
dc38929 lib: sbi: Improve misa_string() implementation
433bac7 docs: platform/generic: Add details about stdout-path DT property
b4efa70 docs: platform/generic: Add details about IPI and timer expectations
dfd9dd6 docs: Add platform requirements document
c2286b6 docs: Fix ordering of pages in table of contents
7be75f5 docs: Don't use italic text in page title
63a513e lib: Rename unprivileged trap handler
aef9a60 lib: Add csr detect support
13ca20d lib: Create a separate math helper function file
79d0fad lib: utils: Update reserved memory fdt node even if PMP is not present
6a053f6 lib: Add support for hart specific features
b2df751 platform: Move platform features to hart
4938024 platform: fpga: Remove redundant platform specific features
ec0d2a7 lib: timer: Provide a hart based timer feature
1f235ec lib: Add platform features in boot time print
22c4334 lib: Add hart features in boot time print
36833ab lib: Optimize inline assembly for unprivilege access functions
38a4b54 firmware: Correct spelling mistakes
28b4052 lib: sbi: detect features before everything else in sbi_hart_init()
4984183 lib: sbi: Improve get_feature_str() implementation and usage
3aa1036 lib: sbi: Remove extra spaces from boot time prints
3a8fc81 lib: sbi: Print platform HART count just before boot HART id
63b0f5f include: sbi: Use scratch pointer as parmeter in HART feature APIs
2966510 lib: sbi: Few cosmetic improvements to HART feature detection
a38bea9 lib: sbi_hart: Detect number of supported PMP regions
89ba634 include: sbi: Add firmware extension constants
73d6ef3 lib: utils: Remove redundant parameters from PLIC init functions
446a9c6 lib: utils: Allow PLIC functions to be used for multiple PLICs
2c685c2 lib: utils: Extend fdt_find_match() Implementation
d30bb68 lib: utils/irqchip: Initialize all matching irqchip DT nodes
a9a9751 lib: utils: Allow CLINT functions to be used for multiple CLINTs
569dd64 lib: utils: Add fdt_parse_clint_node() function
6956e83 lib: utils/ipi: Initialize all matching ipi DT nodes
a63f05f lib: utils/timer: Initialize all matching timer DT nodes
30b6040 Makefile: Fix builtin DTB compilation for out-of-tree platforms
64f1408 firmware: fw_base: Make builtin DTB available to fw_platform_init()
4ce6b7a firmware: fw_base: Don't OR forced FW_OPTIONS
86ec534 firmware: Allow fw_platform_init() to return updated FDT location
c6c65ee Makefile: Preprocess builtin DTS
4e3876d Makefile: Add mechanism for platforms to have multiple builtin DTBs
72019ee platform: kendryte/k210: Use new mechanism of builtin DTB
51f0e4a firmware: Remove FW_PAYLOAD_FDT and related documentation
1b8c012 lib: Add RISC-V hypervisor v0.6.1 support
79bfd67 docs: Use doxygen config to mark the main page
106b888 docs: Remove redundant documentation about combined payload use case
9802906 platform: Add AE350 platform specific SBI handler
32f87e5 platform: Add AE350 cache control SBIs
e2c3f01 lib: Fix __sbi_hfence_gvma_vmid_gpa() and __sbi_hfence_vvma_asid_va()
6966ad0 platform/lib: Allow the OS to map the regions that are protected by PMP
518e85c platform: Update Nuclei ux600 platform support
d5725c2 lib: Don't print delegation CSRs if there is no S-Mode
637b348 lib: Fix the SBI_HART_HAS_MCOUNTEREN feature check
db56ef3 platform: Add support for Shakti C-class SoC from IIT-M
9bd5f8f lib: sbi: Fix 32/64 bits variable compatibility
2314101 lib: Don't return any invalid error from SBI ecall
a98258d include: Bump-up version to 0.8
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Due to 1.14 release being delayed it missed qemu 5.1.
The last snapshot has all code changes though, so this
changes only the version string in the binaries.
shortlog
========
Kevin O'Connor (1):
docs: Note v1.14.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Changes include:
* gcc-10 compile fix
* NetBSD boot fix due to wrong power button address
* Fix endian bug in romfile_loadint()
* Introduce SeaBIOS firmware version check
* Implement QEMU fw_cfg interface support
Required for proper version checking and gcc-10 update on Debian.
Signed-off-by: Helge Deller <deller@gmx.de>
seabios master branch got a few bugfixes, so update
to a newer snapshot to pick them up for 5.1-rc3.
shortlog
========
Kevin O'Connor (2):
vgabios: Fix preserve memory flag in handle_1000
ldnoexec: Add script to remove ET_EXEC flag from intermediate build objects
Paul Menzel (1):
nvme: Increase `nvme_cmd_readwrite()` message log level from 3 to 5
Stefan Reiter (1):
virtio-scsi: fix boot prio detection by using correct lun
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds tcgbios (this was posted earlier [1] but got lost)
and fixes FDT update at ibm,client-architecture-support
for huge guests.
The full list of changes:
Alexey Kardashevskiy (4):
make: Define default rule for .c when V=1 or V=2
version: update to 20200513
fdt: Avoid recursion when traversing tree
version: update to 20200717
Gustavo Romero (1):
board-qemu: Fix comment about SLOF start address
Stefan Berger (6):
tcgbios: Only write logs for PCRs that are allocated
tcgbios: Fix the vendorInfoSize to be of type uint8_t
tcgbios: Add support for SHA3 type of algorithms
elf: Implement elf_get_file_size to determine size of an ELF image
tcgbios: Implement tpm_hash_log_extend_event_buffer
tcgbios: Measure the bootloader file read from disk
[1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
seabios 1.14 release is planned for end of july,
early enough to make it into qemu 5.1-rc2 if
everything goes as planned.
Update seabios to a master snapshot now, so it'll get
test coverage during the freeze and the update to the
final version is much smaller (and should have bugfixes
only).
seabios git shortlog
--------------------
Alexey Kirillov (2):
boot: Detect strict boot order (HALT record) in function
virtio: Do not init non-bootable devices
Christian Ehrhardt (1):
build: use -fcf-protection=none when available
Gerd Hoffmann (25):
boot: cache HALT priority
virtio-scsi: skip initializing non-bootable devices
nvme: skip initializing non-bootable devices
timer: add tsctimer_setfreq()
kvm: detect unconditionally
kvm: add support for reading tsc frequency via cpuid.
kvm: add support for reading tsc frequency from kvmclock
sercon: vbe modeset is int 10h function 4f02 not 4f00
pci: factor out ioconfig_cmd()
pci: add mmconfig support
qemu: factor out qemu_cfg_detect()
qemu: rework e820 detection
qemu: check rtc presence before reading cpu count from cmos
virtio-mmio: device probing and initialization.
virtio-mmio: add support to vp_*() functions
virtio-mmio: add support for scsi devices.
virtio-mmio: add support for block devices.
virtio-mmio: print device type
acpi: add xsdt support
acpi: add dsdt parser
acpi: skip kbd init if not present
acpi: find and register virtio-mmio devices
rewrap Makefile lines.
pci: fix mmconfig support
vga: fix cirrus bios
Jason Andryuk (1):
serialio: Preserve Xen DebugOutputPort
Kevin O'Connor (3):
usb-hid: Improve max packet size checking
Revert "ps2port: adjust init routine to fix PS/2 keyboard issues"
boot: Fixup check for only one item in boot list
Matt DeVillier (4):
hw/usb-hid: Don't abort if setting key repeat rate fails
Skip boot menu and timeout with only one boot device
ps2port: adjust init routine to fix PS/2 keyboard issues
boot: Fix logic for boot menu display
Paul Menzel (4):
std/tcg: Replace zero-length array with flexible-array member
boot: Extend `etc/show-boot-menu` to configure skipping boot menu with only one device
boot: Log, if boot menu is skipped
cdrom: Demote `scsi_is_ready` return print to debug level
Roman Bolshakov (1):
timer: Handle decrements of PIT counter
Stefan Berger (3):
tcgbios: Only write logs for PCRs that are in active PCR banks
tcgbios: Fix the vendorInfoSize to be of type u8
tcgbios: Add support for SHA3 type of algorithms
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Upgrade OpenSBI from v0.6 to v0.7 and the pre-built bios images.
The v0.7 release includes the following commits:
f64f4b9 lib: Add a new platform feature to bringup secondary harts
b677a9b lib: Implement hart hotplug
5b48240 lib: Add possible hart status values
e3f69fc lib: Implement Hart State Management (HSM) SBI extension
6704216 lib: Check MSIP bit after returning from WFI
82ae8e8 makefile: Do setup of the install target more flexible
e1a5b73 platform: sifive: fu540: allow sv32 as an mmu-type
8c83fb2 lib: Fix return type of sbi_hsm_hart_started()
00d332b include: Move bits related defines and macros to sbi_bitops.h
a148996 include: sbi_bitops: More useful bit operations
4a603eb platform: kendryte/k210: Set per-HART stack size to 8KB
678c3c3 include: sbi_scratch: Set per-HART scratch size to 4KB
2abc55b lib: Sort build objects in alphabetical order
6e87507 platform: ae350: Sort build objects in alphabetical order
650c0e5 lib: sbi: Fix coding style issues
078686d lib: serial: Fix coding style issues
3226bd9 lib: Simple bitmap library
c741abc include: Simple hartmask library
d6d7e18 lib: sbi_init: Don't allow HARTID greater than SBI_HARTMASK_MAX_BITS
a4a6a81 lib: Introduce SBI_TLB_INFO_INIT() helper macro
d963164 lib: sbi_tlb: Use sbi_hartmask in sbi_tlb_info
71d2b83 lib: Move all coldboot wait APIs to sbi_init.c
2b945fc lib: sbi_init: Use hartmask for coldboot wait
44ce5b9 include: Remove disabled_hart_mask from sbi_platform
2db381f lib: Introduce sbi_hsm_hart_started_mask() API
61f7768 lib: sbi_ecall_legacy: Use sbi_hsm_hart_started_mask() API
466fecb lib: sbi_system: Use sbi_hsm_hart_started_mask() API
9aad831 lib: sbi_ipi: Use sbi_hsm_hart_started_mask() API
eede1aa lib: sbi_hart: Remove HART available mask and related APIs
757bb44 docs: Remove out-of-date documentation
86d37bb lib: sbi: Fix misaligned trap handling
ffdc858 platform: ariane-fpga: Change license for ariane-fpga from GPL-2.0 to BSD-2
4b2f594 sbi: Add definitions for true/false
0cfe49a libfdt: Add INT32_MAX and UINT32_MAX in libfdt_env.h
baac7e0 libfdt: Upgrade to v1.5.1 release
f92147c include: Make sbi_hart_id_to_scratch() as macro
eeae3d9 firmware: fw_base: Optimize _hartid_to_scratch() implementation
16e7071 lib: sbi_hsm: Optimize sbi_hsm_hart_get_state() implementation
823345e include: Make sbi_current_hartid() as macro in riscv_asm.h
9aabba2 Makefile: Fix distclean make target
9275ed3 platform: ariane-fpga: Set per-HART stack size to 8KB
2343efd platform: Set per-HART stack size to 8KB in the template platform codes
72a0628 platform: Use one unified per-HART stack size macro for all platforms
327ba36 scripts: Cover sifive/fu540 in the 32-bit build
5fbcd62 lib: sbi: Update pmp_get() to return decoded size directly
dce8846 libfdt: Compile fdt_addresses.c
fcb1ded lib: utils: Add a fdt_reserved_memory_fixup() helper
666be6d platform: Clean up include header files
6af5576 lib: utils: Move PLIC DT fix up codes to fdt_helper.c
e846ce1 platform: andes/ae350: Fix up DT for reserved memory
8135520 platform: ariane-fpga: Fix up DT for reserved memory
c9a5268 platform: qemu/virt: Fix up DT for reserved memory
6f9bb83 platform: sifive/fu540: Fix up DT for reserved memory
1071f05 platform: sifive/fu540: Remove "stdout-path" fix-up
dd9439f lib: utils: Add a fdt_cpu_fixup() helper
3f1c847 platform: sifive/fu540: Replace cpu0 node fix-up with the new helper
db6a2b5 lib: utils: Add a general device tree fix-up helper
3f8d754 platform: Update to call general DT fix-up helper
87a7ef7 lib: sbi_scratch: Introduce HART id to scratch table
e23d3ba include: Simplify HART id to scratch macro
19bd531 lib: sbi_hsm: Simplify hart_get_state() and hart_started() APIs
3ebfe0e lib: sbi_tlb: Simplify sbi_tlb_entry_process() function
209134d lib: Handle failure of sbi_hartid_to_scratch() API
bd6ef02 include: sbi_platform: Improve sbi_platform_hart_disabled() API
c9f60fc lib: sbi_scratch: Don't set hartid_to_scratch table for disabled HART
680b098 lib: sbi_hsm: Don't use sbi_platform_hart_count() API
db187d6 lib: sbi_hsm: Remove scratch parameter from hart_started_mask() API
814f38d lib: sbi_hsm: Don't use sbi_platform_hart_disabled() API
75eec9d lib: Don't use sbi_platform_hart_count() API
c51f02c include: sbi_platform: Introduce HART index to HART id table
315a877 platform: sifive/fu540: Remove FU540_ENABLED_HART_MASK option
a0c88dd lib: Fix sbi_ecall_register_extension to prevent extension IDs overlap
9a74a64 lib: Check MSIP bit after returning from WFI
5968894 platform: Move ariane standalone fpga project to its own project
ed265b4 platform: fpga/ariane: Remove redundant plic address macros
fb84879 platform: Add OpenPiton platform support
d1d6560 platform: fpga/common: Add a fdt parsing helper functions
040e4e2 lib: utils: Move fdt fixup helper routines to a different file
4c37451 platform: openpiton: Read the device configurations from device tree
4d93586 lib: prevent coldboot_lottery from overflowing
550ba88 scripts: Extend create-binary-archive.sh for unified binary tar ball
160c885 lib: utils: Improve fdt_cpu_fixup() implementation
1de66d1 lib: Optimize unpriv load/store implementation
626467c lib: Remove scratch parameter from unpriv load/store functions
cb78a48 lib: sbi_trap: Remove scratch parameter from sbi_trap_redirect()
d11c79c lib: sbi_emulate_csr: Remove scratch and hartid parameter
5a7bd0c lib: sbi_illegal_insn: Remove mcause, scratch and hartid parameters
fe37d7d lib: sbi_misaligned_ldst: Remove mcause, scratch and hartid parameters
7487116 lib: sbi_ecall: Remove mcause, scratch and hartid parameters
40b221b lib: sbi_trap: Simplify sbi_trap_handler() API
7b211ff include: sbi_platform: Remove priv parameter from hart_start() callback
5b6957e include: Use more consistent name for atomic xchg() and cmpxchg()
dd0f21c lib: sbi_scratch: Introduce sbi_scratch_last_hartid() API
54b2779 include: sbi_tlb: Remove scratch parameter from sbi_tlb_request()
9e52a45 include: sbi_ipi: Remove scratch parameter from most functions
ec0d80f include: sbi_system: Remove scratch parameter and redundant functions
0a28ea5 include: sbi_timer: Remove scratch parameter from most funcitons
648507a include: sbi_console: Remove scratch parameter from sbi_dprintf()
e5a7f55 platform: thead/c910: Use HSM extension to boot secondary cores
f281de8 lib: irqchip/plic: Fix maximum priority threshold value
6c7922e lib: Support vector extension
615587c docs: Update README about supported SBI versions
66d0184 lib: Allow overriding SBI implementation ID
9f1b72c include: Bump-up version to 0.7
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is a single regression fix for for 5.0:
Greg Kurz (1):
slof: Only close stdout for virtio-serial devices
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only change here is moving the decision about rtas-size
to QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This mainly fixes virtio-serial with and without
enabled iommu-platform.
The full list of changes is:
Alexey Kardashevskiy (3):
llfw: Fix debug printf warnings
virtio-serial: Close device completely
version: update to 20200312
Cédric Le Goater (1):
virtio: Fix typo in virtio_serial_init()
Greg Kurz (2):
virtio-serial: Don't override some words
virtio-serial: Rework shutdown sequence
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Although the real world SiFive HiFive Unleashed board is a 64-bit
hardware configuration, with QEMU it is possible to test 32-bit
configuration with the same hardware features.
This updates the roms Makefile to add the build rules for creating
the 32-bit OpenSBI firmware image for sifive_u machine. A pre-built
OpenSBI v0.6 image has been added as the default bios for 32-bit
sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Upgrade OpenSBI from v0.5 to v0.6 and the pre-built bios images.
The v0.6 release includes the following commits:
dd8ef28 firmware: Fix compile error for FW_PAYLOAD with latest GCC binutils
98f4a20 firmware: Introduce relocation lottery
f728a0b include: Sync-up encoding with priv v1.12-draft and hypervisor v0.5-draft
18897aa include: Use _UL() and _ULL() for defines in riscv_encoding.h
7a13beb firmware: Add preferred boot HART field in struct fw_dynamic_info
215421c lib: Remove date and time from init message
838657c include: Remove ilen member of struct unpriv_trap
b1d8c98 lib: No need to set VSSTATUS.MXR bit in get_insn()
0e1322b lib: Better naming of unpriv APIs for wider use
75f903d lib: Simplify trap parameters in sbi_ecall functions
c96cc03 lib: Fix CPU capabilities detection function
ab14f94 lib: Fix probe extension
813f7f4 lib: Add error detection for misa_extension
dc40042 include: sbi_platform: fix compilation for GCC-9
bd732ae include: Add guest external interrupt related defines
6590a7d lib: Delegate guest page faults to HS-mode
4370f18 include: Extend struct sbi_trap_info for mtval2 and mtinst
086dbdf lib: Fix sbi_get_insn() for load guest page fault
2be424b lib: Extend trap redirection for hypervisor v0.5 spec
7219477 lib: Use MTINST CSR in misaligned load/store emulation
b8732fe lib: Add replacement extension and function ids
aa0ed1d lib: Remove redundant IPI types
1092663 lib: Add TIME extension in SBI
9777aee lib: Add IPI extension in SBI
9407202 lib: Add hfence instruction encoding
331ff6a lib: Support stage1 and stage2 tlb flushing
86a31f5 lib: Implement RFENCE extension
c7d1b12 firmware: Return real DTB address when FW_xyz_FDT_ADDR is not defined
9beb573 firmware: Improve comments for fw_prev_arg1() and fw_next_arg1()
fc6bd90 docs: Improve docs for FDT address passing
46a90d9 lib: utils: Support CLINT with 32bit MMIO access on RV64 system
c0849cd platform: Add T-head C910 initial support
e746673 lib: Remove unnecessary checks from init_coldboot() and init_warmboot()
c3e406f lib: Add initial sbi_exit() API
55e191e lib: Add system early_exit and final_exit APIs
6469ed1 lib: Add timer exit API
b325f6b lib: Add ipi exit API
1993182 lib: Add irqchip exit API
2aa43a1 lib: save/restore MIE CSR in sbi_hart_wait_for_coldboot()
b0c9787 lib: do sbi_exit() upon halt IPI
15ed1e7 lib: improve system reboot and shutdown implementation
73c19e6 lib: zero-out memory allocated using sbi_scratch_alloc_offset()
a67fd68 lib: Add sbi_init_count() API
049ad0b build: Use -ffreestanding
e340bbf include: Add OPENSBI_EXTERNAL_SBI_TYPES in sbi_types.h
b28b8ac docs: Add description of using OPENSBI_EXTERNAL_SBI_TYPES
adf8b73 platform: thead/c910: Remove SBI_PLATFORM_HAS_PMP
f95dd39 docs: platform: Update SiFive FU540 doc as-per U-Boot v2020.01
6ffe1be firmware: Fix placement of .align directives
7daccae platform: thead/c910: Don't enable L2 cache in warm boot
a73d45c platform: thead/c910: Don't set plic/clint address in warm boot
30cdf00 scripts: Add C910 to platform list in the binary archive script
0492c5d include: Typo fix in comment for SBI_SCRATCH_SIZE define
046cc16 lib: Move struct sbi_ipi_data definition to sbi_ipi.c
3d2aaac lib: Introduce sbi_ipi_send_smode() API
da9b76b lib: Introduce sbi_ipi_send_halt() API
a8b4b83 lib: Introduce sbi_tlb_fifo_request() API
5f762d1 lib: Introduce sbi_ipi_event_create/destroy() APIs
817d50d lib: Drop _fifo from the name of various sbi_tlb_fifo_xyz() functions
84cd4fc lib: Initialize TLB management directly from coldboot/warmboot path
0a411bf include: Add generic and simple list handling APIs
37923c4 lib: Add dynamic registration of SBI extensions
7668502 lib: Factor-out SBI legacy extension
161b348 lib: Factor-out SBI replacement extensions
43ac621 lib: Factor-out SBI vendor extension
021b9e7 lib: Factor-out SBI base extension
85647a1 platform: template: typo fix in system reboot/shutdown names
ac1c229 platform: Update UART base addresses for qemu/sifve_u
d79173b platform: Add an platform ops to return platform specific tlb flush limit
2c2bbe7 platform: sifive/fu540: Set tlb range flush limit to zero
5ff1ab0 makefile: add support for building on macOS
6d0b4c5 platform: Drop qemu/sifive_u support
9a717ec platform: sifive: fu540: Add platform specific 'make run' cmd
d6fa7f9 doc: sifive: fu540: Update QEMU instruction when using U-Boot as the payload
179edde lib: sbi_scratch: use bitwise ops in sbi_scratch_alloc_offset()
897b8fb lib: Use __builtin_ctzl() in pmp_get()
1a8ca08 lib: Initialize out value in SBI calls
c2bfa2b lib: irqchip/plic: Disable all contexts and IRQs
c2f23cc platform: Add Spike initial support
a062200 platform: Remove stale options from config.mk files
c03c8a1 scripts: Add Spike to platform list of binary archive script
29bb2a6 docs: platform: Add documentation for Spike platform
48b06ad ThirdPartyNotices: Fix doc styles
892e879 doc: coreboot: Fix doc styles
fdfb533 doc: payload_linux: Fix doc styles
44d1296 doc: andes-ae350: Fix doc styles
a8ef0b5 doc: ariane-fpga: Fix doc styles
82fd42f doc: qemu_virt: Fix doc styles
f8ce996 doc: sifive_fu540: Fix doc styles
27a5c7f doc: thead-c910: Fix doc styles
0b41453 Revert "lib: Use __builtin_ctzl() in pmp_get()"
c66543d lib: utils: htif: Fix 32-bit build
bc874e3 lib: Don't check MIDELEG and MEDELEG at end of delegate_traps()
24c3082 lib: Print interrupt and exception delegation in boot prints
66fb729 platform: sifive: fu540: Add 32-bit specific fdt/payload addresses
3e7d666 platform: qemu: virt: Correct the typo in config.mk
c3b3b8f lib: Fix typo in atomic exchange functions
3936243 lib: Use available hart mask for correct hbase value
f8b3bb8 lib: Simplify the for-loop in sbi_ipi_send_many()
ac5e821 include: Bump-up version to 0.6
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This adds vTPM support, full-FDT-rebuild-on-CAS fixes and
basic ext4 support.
The full changelog is:
Alexey Kardashevskiy (10):
disk-label: Prepare for extenting
disk-label: Support Linux GPT partition type
ext2: Prepare for extending
ext2: Rename group-desc-size
ext2: Read size of group descriptors
ext2: Read all 64bit of inode number
ext2/4: Add basic extent tree support
elf64: Add LE64 ABIv1/2 support for loading images to given address
fdt: Fix creating new nodes at H_CAS
version: update to 20200221
Greg Kurz (2):
fdt: Fix update of "interrupt-controller" node at CAS
fdt: Delete nodes of devices removed between boot and CAS
Stefan Berger (8):
slof: Implement SLOF_get_keystroke() and SLOF_reset()
slof: Make linker script variables accessible
qemu: Make print_version variable accessible
tpm: Add TPM CRQ driver implementation
tpm: Add sha256 implementation
tcgbios: Add TPM 2.0 support and firmware API
tcgbios: Implement menu to clear TPM 2 and activate its PCR banks
tcgbios: Measure the GPT table
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Helge Deller (13):
Add PDC_MEM_MAP and ENTRY_INIT_SRCH_FRST for OSF/MkLinux
Return non-existant BTLB for PDC_BLOCK_TLB
Add serial, parallel and LAN port support of LASI chip
Implement ENTRY_IO_BBLOCK_IN IODC function
Do not print \r on parisc SeaBIOS
Fix serial ports and add PDC_MODEL functions for special instructions enablement
Implement SeaBIOS returning additional addresses. Fixes HP-UX boot.
Fix mod_pgs (number of pages) for graphic cards
Merge pull request #3 from svenschnelle/sti
Merge pull request #4 from svenschnelle/parisc-qemu-4.1.0
parisc: Implement PDC rendenzvous
parisc: Improve soft power button emulation
parisc: Fix line wrapping in STI console code
Sven Schnelle (7):
parisc: fix PDC info for graphics adapter
parisc: add missing header guard to hppa.h
parisc: add LASI PS/2 emulation.
parisc: Add STI support
parisc: wire up graphics console
parisc: Add support for setting STI screen resolution
parisc: support LASI RTC register
Required for STI and LASI support. Also adds a few Bugfixes.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Debian (based) distributions currently provides 2 ARM
toolchains, documented as [1]:
* The ARM EABI (armel) port targets a range of older 32-bit ARM
devices, particularly those used in NAS hardware and a variety
of *plug computers.
* The newer ARM hard-float (armhf) port supports newer, more
powerful 32-bit devices using version 7 of the ARM architecture
specification.
For various reasons documented in [2], the EDK2 project suggests
to use the softfloat toolchain (named 'armel' by Debian).
Force the softfloat cross toolchain prefix on Debian distributions.
[1] https://www.debian.org/ports/arm/#status
[2] https://github.com/tianocore/edk2/commit/41203b9a
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Update to the final 1.13 release. No code changes.
git shortlog
============
Kevin O'Connor (1):
docs: Note v1.13.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes PCI bridges support regression.
This enables IOMMU support in virtio drivers.
The full list of changes is:
Alexey Kardashevskiy (12):
allocator: Fix format strings for DEBUG
virtio: Make virtio_set_qaddr static
client: Load initramdisk location
sloffs: Fix -Wunused-result gcc warnings in read/write
pci-phb: Reimplement dma-map-in/out
virtio: Store queue descriptors in virtio_device
virtio-net: Init queues after features negotiation
virtio: Enable IOMMU
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191206
version: update to 20191217
Michael Roth (1):
dma: Define default dma methods for using by client/package instances
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Due to lchs support merge in upstream seabios gone wrong (applied v3
instead of v4) here is another seabios snapshot update with the
mis-merge fixed up, so lchs support should actually work in -rc2.
Also picked up two tpm bugfixes.
git shortlog from previous snapshot
===================================
Gerd Hoffmann (4):
Revert "geometry: Apply LCHS values for boot devices"
Revert "config: Add toggle for bootdevice information"
Revert "geometry: Add boot_lchs_find_*() utility functions"
Revert "geometry: Read LCHS from fw_cfg"
Sam Eiderman (4):
geometry: Read LCHS from fw_cfg
boot: Build ata and scsi paths in function
geometry: Add boot_lchs_find_*() utility functions
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tpm: Require a response to have minimum size of a valid response header
tcgbios: Check for enough bytes returned from TPM2_GetCapability
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
-----BEGIN PGP SIGNATURE-----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=vwgx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-rc2' into staging
RISC-V Fixes for 4.2-rc2
This contains a handful of patches that I'd like to target for 4.2:
* OpenSBI upgrade to 0.5
* Increase in the flash size of the virt board.
* A non-functional cleanup.
* A cleanup to our MIP handling that avoids atomics.
This passes "make check" and boots OpenEmbedded for me.
# gpg: Signature made Thu 14 Nov 2019 18:39:27 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-rc2:
riscv/virt: Increase flash size
opensbi: Upgrade from v0.4 to v0.5
target/riscv: Remove atomic accesses to MIP CSR
remove unnecessary ifdef TARGET_RISCV64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This release has:
Lot of critical fixes
Hypervisor extension support
SBI v0.2 base extension support
Debug prints support
Handle traps when doing unpriv load/store
Allow compiling without FP support
Use git describe to generate boot-time banner
Andes AE350 platform support
ShortLog:
Anup Patel (14):
platform: sifive/fu540: Move FDT further up
lib: Allow compiling without FP support
lib: Introduce sbi_dprintf() API
lib: Use sbi_dprintf() for invalid CSRs
lib: Handle traps when doing unpriv load/store in get_insn()
lib: Delegate supervisor ecall to HS-mode when H extension available
lib: Extend sbi_hart_switch_mode() to support hypervisor extension
lib: Extend sbi_trap_redirect() for hypervisor extension
lib: Redirect WFI trapped from VS/VU mode to HS-mode
include: Extend get_insn() to read instruction from VS/VU mode
lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR
Makefile: Minor fix in OPENSBI_VERSION_GIT
lib: Fix coldboot race condition observed on emulators/simulators
include: Bump-up version to 0.5
Atish Patra (16):
lib: Provide an atomic exchange function unsigned long
lib: Fix race conditions in tlb fifo access.
platform: Remove the ipi_sync method from all platforms.
lib: Fix timer for 32 bit
lib: Support atomic swap instructions
lib: Upgrade to full flush if size is at least threshold
docs: Update the fu540 platform guide as per U-Boot documents.
lib: Change tlb range flush threshold to 4k page instead of 1G
lib: provide a platform specific tlb range flush threshold
lib: Fix tlb flush range limit value
Test: Move test payload related code out of interface header
lib: Align error codes as per SBI specification.
lib: Rename existing SBI implementation as 0.1.
lib: Remove redundant variable assignment
lib: Implement SBI v0.2
lib: Provide a platform hook to implement vendor specific SBI extensions.
Bin Meng (6):
platform: sifive: fu540: Use standard value string for cpu node status
README: Document 32-bit / 64-bit images build
treewide: Use conventional names for 32-bit and 64-bit
platform: sifive: fu540: Expand FDT size before any patching
firmware: Use macro instead of magic number for boot status
docs: platform: Update descriptions for qemu/sifive_u support
Damien Le Moal (4):
kendryte/k210: Use sifive UART driver
kendryte/k210: remove sysctl code
README: Update license information
kendryte/k210: remove unused file
Georg Kotheimer (1):
utils: Use cpu_to_fdt32() when writing to fdt
Jacob Garber (4):
lib: Use bitwise & instead of boolean &&
lib: Use correct type for return value
lib: Prevent unintended sign extensions
lib: Correct null pointer check
Lukas Auer (1):
firmware: do not use relocated _boot_status before it is valid
Nylon Chen (3):
firmware: Fix the loop condition of _wait_relocate_copy_done section
platform: Add Andes AE350 initial support
scripts: Add AE350 to platform list in the binary archive script
Palmer Dabbelt (1):
Include `git describe` in OpenSBI
Zong Li (1):
Write MSIP by using memory-mapped control register
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
seabios 1.13 will be released later this month. This patch updates the
seabios submodule and binaries in qemu to a snapshot of git master.
That will increase the test coverage of the upcoming seabios release and
will also make the number of changes smaller when we update to the final
1.13 release during qemu code freeze for 4.2.
v3: add ahci bugfix
v2: build binaries with gcc 4.8.5 instead of gcc 8.3.1 (rhel7).
git shortlog rel-1.12.1..
=========================
David Woodhouse (2):
csm: Sanitise alignment constraint in Legacy16GetTableAddress
csm: Fix boot priority translation
Denis Plotnikov (1):
virtio: extend virtio queue size to 256
Gerd Hoffmann (21):
vga: move modelist from bochsvga.c to new svgamodes.c
vga: make memcpy_high() public
vga: add atiext driver
vga: add ati bios tables
vbe: add edid support.
ati: add edid support.
bochsvga: add edid support.
bochsdisplay: add edid support.
bochsdisplay: parse resolution from edid.
add get_keystroke_full() helper
bootmenu: add support for more than 9 entries
optionrom: disallow int19 redirect for pnp roms.
ati-vga: make less verbose
ati-vga: fix ati_read()
ati-vga: make i2c register and bits configurable
ati-vga: try vga ddc first
ati-vga: add rage128 edid support
bochsdisplay: add copyright and license to bochsdisplay.c
ramfb: add copyright and license to ramfb.c
cp437: add license to cp437.c
ahci: zero-initialize port struct
Joseph Pacheco-Corwin (1):
bootsplash: Added support for 16/24/32bpp in one function
Kevin O'Connor (10):
output: Avoid thunking to 16bit mode in printf() if no vgabios
docs: Update mailing list archive links
docs: Fix cut-and-paste error in Mailinglist.md archive link
usb-ehci: Clear pipe token on pipe reallocate
pciinit: Use %pP shorthand for printing device ids in intel_igd_setup()
virtio-pci: Use %pP format in dprintf() calls
Makefile: Build with -Wno-address-of-packed-member
svgamodes: Add copyright notice to vgasrc/svgamodes.c
docs: Add developer-certificate-of-origin
docs: Note release date for v1.12.1
Liran Alon (1):
pvscsi: ring_desc do not have to be page aligned
Sam Eiderman (6):
smbios: Add missing zero byte to Type 0
geometry: Read LCHS from fw_cfg
boot: Reorder functions in boot.c
geometry: Add boot_lchs_find_*() utility functions
config: Add toggle for bootdevice information
geometry: Apply LCHS values for boot devices
Stefan Berger (2):
tcgbios: Use table to convert hash to buffer size
tcgbios: Implement TPM 2.0 menu item to activate and deactivate PCR banks
Stefano Garzarella (1):
qemu: avoid debug prints if debugcon is not enabled
Stephen Douthit (1):
tpm: Check for TPM related ACPI tables before attempting hw probe
Uwe Kleine-König (3):
cbvga: reuse svga modes definitions from svgamodes.c
Add additional resolutions for 16:9 displays: 1600x900 and 2560x1440
Remove dos line endings introduced in the last two commits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This aims v4.2 and fixes:
1. full FDT rendering;
2. gcc9 -Waddress-of-packed-member.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
boot both PVH images and bzImages without relying on option roms.
This characteristics make it an ideal companion for the microvm
machine type.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
drop Python2 dependency in EDK2 build scripts.
-----BEGIN PGP SIGNATURE-----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=BE2l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20191007' into staging
Improve scripts relying on the EDK2 submodule,
drop Python2 dependency in EDK2 build scripts.
# gpg: Signature made Mon 07 Oct 2019 14:31:38 BST
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/edk2-next-20191007:
edk2 build scripts: work around TianoCore#1607 without forcing Python 2
edk2 build scripts: honor external BaseTools flags with uefi-test-tools
roms: Add a 'make help' target alias
roms/Makefile.edk2: don't pull in submodules when building from tarball
make-release: pull in edk2 submodules so we can build it from tarballs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It turns out that forcing python2 for running the edk2 "build" utility is
neither necessary nor sufficient.
Forcing python2 is not sufficient for two reasons:
- QEMU is moving away from python2, with python2 nearing EOL,
- according to my most recent testing, the lacking dependency information
in the makefiles that are generated by edk2's "build" utility can cause
parallel build failures even when "build" is executed by python2.
And forcing python2 is not necessary because we can still return to the
original idea of filtering out jobserver-related options from MAKEFLAGS.
So do that.
While at it, cut short edk2's auto-detection of the python3.* minor
version, by setting PYTHON_COMMAND to "python3" (which we expect to be
available wherever we intend to build edk2).
With this patch, the guest UEFI binaries that are used as part of the BIOS
tables test, and the OVMF and ArmVirtQemu platform firmwares, will be
built strictly in a single job, regardless of an outermost "-jN" make
option. Alas, there appears to be no reliable way to build edk2 in an
(outer make, inner make) environment, with a jobserver enabled.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Various C projects provide a 'make help' target. Our root directory
does so. The roms/ directory lacks a such rule, but already displays
a help output when the default target is called.
Add a 'help' target aliased to the default one, to avoid:
$ make -C roms help
make: *** No rule to make target 'help'. Stop.
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920171159.18633-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently the `make efi` target pulls submodules nested under the
roms/edk2 submodule as dependencies. However, when we attempt to build
from a tarball this fails since we are no longer in a git tree.
A preceding patch will pre-populate these submodules in the tarball,
so assume this build dependency is only needed when building from a
git tree.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org # v4.1.0
Reported-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190912231202.12327-3-mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This fixes USB host bus adapter name in the device tree to match QEMU's
one.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real hardware.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This allocates space for FWNMI log in RTAS and fixes phandles at
the ibm,client-architecture-support stage.
The full list is:
* libnet: Fix the check of the argument lengths of the "ping" command
* fdt: Update phandles after H_CAS
* rtas: Reserve space for FWNMI log
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we fail to boot a qemu powernv machine with a Power9
processor:
PLAT: Detected generic platform
PLAT: Detected BMC platform generic
CPU: All 1 processors called in...
CHIPTOD: Unknown TOD type !
CHIPTOD: Failed ChipTOD detection !
Aborting!
With v6.4 we can boot both a Power8 and Power9 powernv machine.
Built from submodule with powerpc64le-linux-gnu-gcc (Debian 8.3.0-2).
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20190718054218.9581-1-joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only change that SLOF does not rely on QEMU providing an RTAS blob
and provides one itself:
https://git.qemu.org/?p=SLOF.git;a=commitdiff;h=5e4ed1fd0f39e
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the make rules are wrongly using qemu/virt opensbi image
for sifive_u machine. Correct it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1564812484-20385-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add OpenSBI version 0.4 as a git submodule and as a prebult binary.
OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
specifications for platform-specific firmwares executing in M-mode. For all
supported platforms, OpenSBI provides several runtime firmware examples.
These example firmwares can be used to replace the legacy riscv-pk bootloader
and enable the use of well-known bootloaders such as U-Boot.
OpenSBI is distributed under the terms of the BSD 2-clause license
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
In this case all of the code we are using from OpenSBI is BSD 2-clause
as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt
is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being
linked with QEMU either it is just being included with QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This only has a fix for ipv4-after-ipv6 booting problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(1) For TianoCore Bugzilla
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
the majority of the edk2 tree was relicensed under the
BSD-2-Clause-Patent license:
https://spdx.org/licenses/BSD-2-Clause-Patent.html>
Edk2 commit f53de8aecb12 ("edk2: Add License-History.txt", 2019-04-09)
added a new file called "License-History.txt", describing license and
contributor agreement changes over time.
(2) For advacing edk2's OpenSSL git submodule to the 1.1.1b release, a
more up-to-date ArmSoftFloatLib instance became necessary, on 32-bit
ARM. Therefore, the embedded (and by now, obsolete) Berkeley SoftFloat
library was replaced with a git submodule of the same, checked out at
the latest release ("3e", plus a typo fix on top -- commit
b64af41c3276). This was implemented for TianoCore Bugzilla
https://bugzilla.tianocore.org/show_bug.cgi?id=1845
in edk2 commit range b6cfa686e42d..371e7001e8d5.
Include the edk2 project's "License-History.txt" file, and the Berkeley
SoftFloat library's "COPYING.txt", in our generated
"pc-bios/edk2-licenses.txt" text file.
Cc: Philippe Mathieu-Daud <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
At tag "edk2-stable201905", the build flags HTTP_BOOT_ENABLE and
TLS_ENABLE have become useless. Their roles have been taken by
NETWORK_HTTP_BOOT_ENABLE and NETWORK_TLS_ENABLE, respectively. Remove the
old build flags.
Cc: Philippe Mathieu-Daud <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Due to edk2 commits 631195044ff0 ("OvmfPkg: Update DSC/FDF to use
NetworkPkg's include fragment file.", 2019-05-16) and 157a3b1aa50f
("ArmVirtPkg: Update DSC/FDF to use NetworkPkg's include fragment file.",
2019-05-16), we'll have to pefix the HTTP_BOOT_ENABLE and TLS_ENABLE build
flags with "NETWORK_", for building edk2 at tag "edk2-stable201905".
Right now the new flags are no-ops, so we can insert them separately,
before advancing our edk2 submodule reference. We will remove the old
flags afterwards.
Cc: Philippe Mathieu-Daud <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1831477
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
In commit 1cab464136 we incorrectly described the
EDK2_BASETOOLS_OPTFLAGS can pass CPPFLAGS and CFLAGS
options to the EDK2 build tools, but it only expands
the CFLAGS (not to the CPPFLAGS).
Update the description to be more accurate.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190506141923.12183-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add the "efi" target to "Makefile".
Introduce "Makefile.edk2" for building and cleaning the firmware images
and varstore templates.
Collect the common bits from the recipes in the helper script
"edk2-build.sh".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
We don't (can't) have a recipe for building just $(EDK2_EFIROM);
therefore, while we call the target $(EDK2_EFIROM), we actually build all
of the edk2 BaseTools. Rename the target to edk2-basetools, and update the
iPXE prerequisite accordingly. This will let other targets depend on
"edk2-basetools", where an $(EDK2_EFIROM) pre-requisite would be
misleading.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The edk2 "build" utility natively supports building modules (that is, INF
files) in parallel. The feature is not useful when building a single
module (with the "-m" option), but it is useful for platform firmware
builds (which include many modules). Add a function that determines the
"-n" option argument for "build", from the MAKEFLAGS variable (i.e. based
on the presence of a make job server).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Update the roms/edk2 submodule hash from edk2-stable201811 to
edk2-stable201903. The release notes are available at
<https://github.com/tianocore/edk2/releases/tag/edk2-stable201903>.
$ git shortlog edk2-stable201811..edk2-stable201903
Achin Gupta (9):
ArmPkg: Add PCDs needed for MM communication driver.
ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
ArmPkg/Include: Add MM interface SVC return codes.
ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
StandaloneMmPkg: Add missing dependency on PL011UartClockLib
StandaloneMmPkg: Enforce alignment check for AArch64
StandaloneMmPkg: Zero data structure explicitly
StandaloneMmPkg: Replace dependency on ArmMmuLib
StandaloneMmPkg: Update dependency on PeCoffExtraActionLib
Albecki, Mateusz (1):
MdeModulePkg/SdMmcPciHcDxe Fix eMMC HS400 switch sequence
Alex James (2):
StdLib/sys/termios: Define cc_t as unsigned
StdLib/Environs: Avoid infinite recursion in _Exit
Antoine Coeur (5):
ArmVirtPkg: Fix various typos
CryptoPkg: Fix various typos
CorebootPayloadPkg: Fix various typos
CorebootModulePkg: Fix various typos
BaseTools: Various typo
Ard Biesheuvel (116):
MdePkg/BaseIoLibIntrinsicArmVirt ARM: avoid double word loads and stores
ArmPkg/ArmGicDxe ARM: fix encoding for GICv3 interrupt acknowledge
ArmPlatformPkg: clear frame pointer in startup code
ArmVirtPkg/PrePi: clear frame pointer in startup code
ArmPkg/ArmSmcPsciResetSystemLib: add missing call to ExitBootServices()
ArmPkg: remove now unused BsdLib.h
ArmPlatformPkg/NorFlashDxe: prepare for devicepath format change
ArmPlatformPkg/NorFlashDxe: use one GUID plus index to identify flash banks
ArmVirtPkg/FdtClientDxe: take DT node 'status' properties into account
ArmVirtPkg/NorFlashQemuLib: discover NOR flash banks dynamically
ArmPlatformPkg/NorFlashPlatformLib: remove unused Guid member from struct
ArmPkg/ArmPkg.dsc: move ArmMmuStandaloneMmLib.inf to AARCH64 section
EmbeddedPkg/TemplateSec: remove unused module
EmbeddedPkg/PrePiHobLib: drop CreateHobList() from library
ArmVirtPkg/FdtPciHostBridgeLib: map ECAM and I/O spaces in GCD memory map
ArmVirtPkg/QemuVirtMemInfoLib: remove 1:1 mapping of top of PA range
MdePkg/ProcessorBind.h AARCH64: limit MAX_ADDRESS to 48 bits
ArmPkg/ArmLib: add support for reading the max physical address space size
ArmVirtPkg/XenVirtMemInfoLib: refactor reading of the PA space size
ArmPkg/ArmMmuLib: take the CPU supported maximum PA space into account
ArmPkg/CpuPei: base GCD memory space size on CPU's PA range
ArmPlatformPkg/PrePi: base GCD memory space size on CPU's PA range
ArmVirtPkg/PrePi: base GCD memory space size on CPU's PA range
BeagleBoardPkg/PrePi: base GCD memory space size on CPU's PA range
ArmPlatformPkg/PlatformPei: drop unused PCD references
EmbeddedPkg/PrePiLib: drop unused PCD reference
ArmVirtPkg: drop PcdPrePiCpuMemorySize assignments from all platforms
EmbeddedPkg/EmbeddedPkg.dec: drop PcdPrePiCpuMemorySize declarations
ArmPkg/ArmMmuLib ARM: handle unmapped section in GetMemoryRegion()
ArmPkg/ArmMmuLib ARM: handle unmapped sections when updating permissions
ArmVirtPkg/NorFlashQemuLib: disregard our primary FV
ArmVirtPkg/QemuVirtMemInfoLib: trim the MMIO region mapping
BaseTools/CommonLib: avoid using 'native' word size in IP address handling
BaseTools/CommonLib: use explicit 64-bit type in Strtoi()
BaseTools/DevicePath: use explicit 64-bit number parsing routines
BaseTools/CommonLib: add definition of MAX_UINT32
BaseTools/DevicePath: use MAX_UINT32 as default device path max size
BaseTools/CommonLib: get rid of 'native' type string parsing routines
BaseTools/CommonLib: drop definition of MAX_UINTN
BaseTools/CommonLib: drop the use of MAX_ADDRESS
Revert "MdePkg/ProcessorBind.h AARCH64: limit MAX_ADDRESS to 48 bits"
MdeModulePkg/FileExplorerLib: avoid packed struct for program data
BaseTools/tools_def AARCH64 RELEASE: move GCC49/GGC5 to 4 KB alignment
ArmVirtPkg/ArmVirtQemuKernel ARM: make some PCD settings apply to ARM
ArmVirtPkg/PrePiUniCoreRelocatable CLANG38: work around build issues
BaseTools/GenFw ARM: don't permit R_ARM_GOT_PREL relocations
MdePkg/BaseMemoryLibOptDxe ARM: add missing function annotations
BaseTools/tools_def ARM CLANG35: work around -mno-movt option name change
ArmVirtPkg/PrePi ARM CLANG35: drop incompatible command line option
ArmVirtPkg/ArmVirt.dsc.inc: define TcpIoLib resolution unconditionally
ArmPkg: remove redundant _ARM_PLATFORM_FLAGS overrides
EmbeddedPkg: remove GdbDebugAgent library
BaseTools/tools_def ARM: emit PIC veneers
ArmPkg/DefaultExceptionHandlerLib ARM: avoid endless loop in RELEASE builds
MdePkg/Base: introduce MAX_ALLOC_ADDRESS
MdeModulePkg/Dxe/Gcd: disregard memory above MAX_ALLOC_ADDRESS
MdeModulePkg/Dxe/Page: take MAX_ALLOC_ADDRESS into account
ArmPkg/ArmMmuLib: take MAX_ALLOC_ADDRESS into account
ArmPlatformPkg/MemoryInitPeim: take MAX_ALLOC_ADDRESS into account
ArmVirtPkg/MemoryInitPeiLib: split memory HOB based on MAX_ALLOC_ADDRESS
MdePkg/Arm/ProcessorBind.h: fix copy/paste error
ArmPlatformPkg/SP805WatchdogDxe: cosmetic cleanup
ArmPlatformPkg/SP805WatchdogDxe: switch to interrupt mode
ArmPkg/GenericWatchdogDxe: clean up the code
ArmPkg/GenericWatchdogDxe: implement RegisterHandler() method
ArmPlatformPkg/PL011SerialPortLib: use untyped PCD for register base
BaseTools/tools_def ARM: use softfloat target for CLANG3x
BaseTools/GenFds: permit stripped MM_CORE_STANDALONE binaries
BaseTools/Conf/tools_def.template: drop ARM/AARCH support from GCC46/GCC47
ArmPkg/ArmMmuLib ARM: add missing support for non-shareable cached mappings
ArmPkg/ArmMmuLib ARM: fix thinko in second level page table handling
MdePkg: implement MmServicesTableLib based on traditional SMM
BaseTools/tools_def GCC5: disable LTO for ASLC invocations
ArmPkg/ArmMmuLib ARM: disregard high memory when setting permissions
ArmPkg/ArmMmuLib AARCH64: fix out of bounds access
MdeModulePkg/MdeModulePkg.dsc: add MmServicesTableLib resolution
OvmfPkg: add MmServicesTableLib resolution
QuarkPlatformPkg: add MmServicesTableLib resolution
Vlv2TbltDevicePkg: add MmServicesTableLib resolution
MdeModulePkg/FaultTolerantWriteDxe: factor out boot service accesses
MdeModulePkg/FaultTolerantWriteDxe: implement standalone MM version
MdeModulePkg/VariableRuntimeDxe: factor out boot service accesses
MdeModulePkg/VariableRuntimeDxe: implement standalone MM version
MdePkg: introduce standalone MM entry point library class
MdePkg: introduce standalone MM entry point library implementation
MdePkg: add MM_STANDALONE implementation of MmServicesTableLib
MdeModulePkg: implement NULL instance of HobLib library class
MdeModulePkg: implement NULL instance of MemoryAllocationLib library class
MdeModulePkg/MdeModulePkg/dsc: move DxeDebugSupportDxe to x86 only section
MdeModulePkg/AuthVariableLibNull: add MM_STANDALONE support
MdeModulePkg/VarCheckLib: add MM_STANDALONE support
MdeModulePkg/MdeModulePkg.dsc: add MM_STANDALONE FTW and variable modules
ArmPkg/DebugAgentSymbolsBaseLib: remove exception handling
ArmPkg/DefaultExceptionHandlerLib: declare the permitted usage context
ArmVirtPkg: drop reference to ArmPkg/DefaultExceptionHandlerLibBase
ArmPkg/DefaultExceptionHandlerLib: drop BASE variant
ArmPkg/DefaultExceptionHandlerLib: use console if available
EmbeddedPkg/NorFlashInfoLib: convert to BASE library
ArmPkg/DefaultExceptionHandlerLib: add missing UefiLib include
CryptoPkg/SmmCryptLib: permit use by MM_STANDALONE modules
SecurityPkg/PlatformSecureLibNull: permit use by MM_STANDALONE modules
MdeModulePkg/VarCheckUefiLib: permit use by MM_STANDALONE modules
MdePkg/UefiDevicePathLib: permit use by MM_STANDALONE modules
StandaloneMmPkg: add HobLib implementation for MM_STANDALONE modules
StandaloneMmPkg: add MM_STANDALONE MemoryAllocationLib implementation
StandaloneMmPkg/StandaloneMmCoreHobLib: restrict to MM_CORE_STANDALONE
StandaloneMmPkg/StandaloneMmCpu: fix typo Standlone -> Standalone
StandaloneMmPkg/StandaloneMmCoreEntryPoint: use %a modifier for ASCII strings
StandaloneMmPkg/StandaloneMmCoreEntryPoint: remove bogus ASSERT_EFI_ERROR()s
StandaloneMmPkg/StandaloneMmPeCoffExtraActionLib: ignore runtime attribute
StandaloneMmPkg/Core/Dispatcher: don't copy dispatched image twice
StandaloneMmPkg/StandaloneMmCoreEntryPoint: permit the use of TE images
MdeModulePkg/MdeModulePkg.dsc: ignore standalone MM modules for EBC or XCODE5
ArmPkg/ArmMmuLib ARM: trim high memory regions instead of rejecting them
ArmPkg/ArmMmuLib AARCH64: get rid of needless TLB invalidation
MdePkg/BaseLib: implement SpeculationBarrier() for ARM and AArch64
Ashish Singhal (6):
MdeModulePkg/SdMmcPciHcDxe: Add SDMMC HC v4 and above Support.
MdePkg/UefiLib: Abstract driver model protocol uninstallation
NetworkPkg/IScsiDxe: Use UEFILib APIs to uninstall protocols.
NetworkPkg: Protocol Uninstallation Cleanup
DynamicTablesPkg/DynamicTableManagerDxe: Update DEPEX
DynamicTablesPkg/AcpiSpcrLibArm: Support 16550 UART.
Bret Barkelew (4):
MdePkg/IndustryStandard: Introduce a correctly spelled macro
SecurityPkg/Tcg: Fix typos in TcgDxe.c and Tcg2Dxe.c
MdePkg/IndustryStandard: Remove an incorrectly spelled macro
MdePkg/UefiLib: Add a new API GetVariable3
Chasel, Chiu (16):
IntelFsp2WrapperPkg: Support FSP Dispatch mode
IntelFsp2WrapperPkg: Revert 90c5bc08
IntelFsp2WrapperPkg: Support FSP Dispatch mode
IntelFsp2WrapperPkg: Fix line ending format issue
IntelFsp2WrapperPkg: Fix constant if statements issue
Maintainers.txt: Change package maintainer of IntelFsp*Pkg
BaseTools/GenFv: Support SecCore and PeiCore in different FV
IntelFsp2Pkg: Add FspmArchConfigPpi to support Dispatch mode
IntelFsp2Pkg: Remove unused keyword in new PPI header
IntelFsp2Pkg: Add function to get bootloader stack pointer
IntelFsp2Pkg: FSP can utilize bootloader stack
MdePkg: Support EFI_PEI_CORE_FV_LOCATION_PPI
MdeModulePkg/PeiMain: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Wrong Debug Information for SecCore
Chen A Chen (18):
SecurityPkg: Remove dead code and inf redundant definitions.
SecurityPkg: Remove code under UserIdentification folder.
FatPkg: Break down Part.c file.
MdePkg/UefiGpt.h: Add new definition for enable GPT support
FatPkg: Add GPT check in FatPei to support Capsule-on-Disk feature.
MdePkg/UefiSpec.h: Add definition to support Capsule-on-Disk feature
MdeModulePkg/CapsuleApp: Add a function used to get next DevicePath
MdeModulePkg/CapsuleApp: Add functions to support Capsule-on-Disk
MdeModulePkg/CapsuleApp: Enhance CapsuleApp to support Capsule-on-Disk
FatPkg/FatPei/Gpt.c: Fix uninitialized variable issue
MdeModulePkg/CapsuleApp: Fix potential NULL pointer dereference issue
MdeModulePkg/CapsuleApp: Fix potential NULL pointer dereference issue
MdeModulePkg/CapsuleApp: Fix memory leak issue.
UefiCpuPkg/Microcode: Fix incorrect checksum issue for extended table
IntelSiliconPkg/MicrocodeUpdate: Fix incorrect checksum issue
MdeModulePkg: Rename confusion function name
UefiCpuPkg/Microcode: Fix InComplete CheckSum32 issue
UefiCpuPkg/Microcode.c: Add verification before calculate CheckSum32
Chu, Maggie (2):
SecurityPkg: Incorrect warning message for Opal admin revert action
SecurityPkg: Add a PCD to skip Opal password prompt
Dandan Bi (12):
MdeModulePkg/DisplayEngine: Remove useless NULL ptr check for NewPos
MdePkg: check Length para before use in DevPathToTextUsbWWID
MdePkg: Check input Ptrs in GetSectionFromAnyFvByFileType
BaseTools/VfrCompile: report error for Integer overflow
MdeModulePkg/NonDiscoverablePciDevice: Remove the redundant check
MdePkg/BasePeCoffLib: Add more check for relocation data
MdePkg/BasePeCoffLib: Correct the address of RelocBaseEnd
ShellPkg/UefiShellAcpiViewCommandLib: Fix VS tool chain build failure
MdeModulePkg: Fix coding style issues
MdePkg: Fix coding style issues
MdePkg/StatusCodeDataTypeId.h: Add new definition per PI1.7 Spec
MdeModulePkg/BmBoot: Report status when fail to load/start boot option
Derek Lin (1):
BaseTools: Fix GenFds error doesn't break build.
Edgar Handal (1):
MdeModulePkg/SdMmcPciHcDxe: Use 16/32-bit IO widths
Eric Dong (9):
UefiCpuPkg/Cpuid.h: Sync CPUID definition to latest SDM.
UefiCpuPkg/Cpuid: Add code to support new definition.
UefiCpuPkg/RegisterCpuFeaturesLib: Enhance debug message.
UefiCpuPkg/RegisterCpuFeaturesLib: Avoid AP calls PeiService.
UefiCpuPkg/S3Resume2Pei: check 64BIT_WAKE_F in FACS.OSPMFlags.
MdeModulePkg/BootScriptExecuteorDxe: check 64BIT_WAKE_F in FACS.OSPMFlags
UefiCpuPkg/RegisterCpuFeaturesLib: Replace AcquireSpinLock.
SecurityPkg/OpalPassword: Update strings on Opal Setup page
SecurityPkg/OpalPassword: Add NULL pointer check before using it
Felix Polyudov (1):
BaseTools: Fix incorrect formatting of GenFds command dictionary
Feng, Bob C (52):
BaseTools: Fix the problem using FILE_GUID override in .dsc
BaseTools: Enable Pcd Array support.
BaseTool: Filter out unused structure pcds
BaseTools: Replace the sqlite database with list
BaseTools: Optimize string concatenation
BaseTools: Customize deepcopy function.
BaseTools: Correct CCFLAG for PcdValueInit
BaseTools: Fix PcdNvStoreDefaultValueBuffer Value.
BaseTools: Fixed bugs in CopyDict function
BaseTools: Fixed the build fail issue for cases
BaseTools: Fix PcdArray issue
BaseTools: Fixed metafile parser issues
BaseTools: Reset FdsGlobalVariable
BaseTools: Fixed build report issue.
BaseTools: Correct PcdArray value assigment statement
BaseTools: Report Error if use SET in Dsc
BaseTools: Remove unused logic for EDKI
BaseTools: Remove unused logic for IPF
BaseTools: Remove unused logic from C tools
BaseTools: Enable component override functionality
BaseTools: Remove unused logic for EDKI
BaseTools: Remove EDK_SOURCE keyword from ECC Tool
BaseTools: Remove EDK_SOURCE keyword from GenFds tool.
BaseTools: Remove EDK_SOURCE keyword from Inf Parser.
BaseTools: Allow empty value for HiiPcd in Dsc
BaseTools: Fix build report issue.
BaseTools: use OrderedDict instead of sdict
BaseTools: Make sure AllPcdList valid.
BaseTools:File open failed for VPD MapFile
BaseTools:Fixed Rsa issue and a set define issue.
BaseTools:ord() don't match in py2 and py3
BaseTools: the list and iterator translation
BaseTools: Handle the bytes and str difference
BaseTools: ECC tool Python3 adaption
BaseTools: Eot tool Python3 adaption
BaseTools: Enable CODE format in DEC file
BaseTools: Fixed incorrect line number in PcdValueInit.c
BaseTools: Correct the error message for UPT
BaseTools: Fixed a build report issue.
BaseTools: Fix the build report issue about Structure PCD
BaseTools: Fixed an issue about StructurePcd
BaseTools: Add MaxSizeUserSet to Pcd deepcopy function
BaseTools: Fix a ParseDevPathValue function issue.
BaseTools: Fixed a bug in Vpd handling
BaseTools: Fixed a code bug for Pcd Array.
BaseTools: replace Sdict with OrderedDict in UPT
BaseTool: Fixed incremental rebuild issue.
BaseTools: Fix a bug about Structure PCD
BaseTools: Add parameter check for the AsciiStringToUint64
BaseTools: Eot failed when enable python3
BaseTools: Fix a Eot issue.
BaseTools: Add python3-distutils Ubuntu package checking
Gary Lin (2):
MdePkg ACPI: fix the typos in Acpi61.h and Acpi62.h
MdeModulePkg/UefiBootManagerLib: Match the nested partitions
Gonzalez Del Cueto, Rodrigo (1):
SecurityPkg/TcgConfigDxe: Allow enabling TPM 1.2 device from disabled state.
Hao Wu (25):
MdePkg/BaseLib: Introduce new SpeculationBarrier API
MdeModulePkg/FaultTolerantWrite: Update to consume SpeculationBarrier
MdeModulePkg/SmmLockBox: Update to consume SpeculationBarrier
MdeModulePkg/Variable: Update to consume SpeculationBarrier
UefiCpuPkg/PiSmmCpuDxeSmm: Update to consume SpeculationBarrier
UefiCpuPkg: Merge StuffRsb.inc files into one in UefiCpuPkg/Include
MdeModulePkg/SdMmcPciHcDxe: Fix VS2015 IA32 NOOPT build failure
MdeModulePkg/SdMmcPciHcDxe: Update comment for spec compliance status
MdeModulePkg: Add definitions for ATA AHCI host controller PPI
MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI
MdeModulePkg: Add definitions for Storage Security Command PPI
MdeModulePkg: Add GUID for LockBox to save storage dev to init in S3
MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable
MdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI
MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox
MdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI
MdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_'
MdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox()
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
OvmfPkg/LockBoxLib: Update the comments for API UpdateLockBox()
SecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI
SecurityPkg/HddPassword: Add Security feature set support for ATA dev
MdeModulePkg/UfsBlockIoPei: Correct use of 'DeviceIndex' in BlkIO PPI
MdeModulePkg/PartitionDxe: Ensure blocksize holds MBR (CVE-2018-12180)
MdeModulePkg/RamDiskDxe: Restrict on RAM disk size (CVE-2018-12180)
Hess Chen (1):
BaseTools/ECC: Add a new type of exception
Hsueh, Hong-chihX (1):
MdePkg/BasePeCoffLib: skip runtime relocation if reloc info is invalid
Jaben Carsey (14):
BaseTools: Move Identification file to Eot
BaseTools: cleanup LongFilePathSupport usage
BaseTools: create and use a standard shared variable for '*'
BaseTools: fix imports
MdeModulePkg: fix comments in BaseSortLib
BaseTools/build/build: refactor and move functions
BaseTools/Workspace/InfBuildData: move functions
BaseTools/DscBuildData: move function
BaseTools/AutoGen: move functions
BaseTools/GenFds/Capsule: move function logic
BaseTools/Common/Misc: move private functions
BaseTools/Common/Misc: remove uncalled code
BaseTools/Common/Misc: Cleanup the imports
BaseTools/build/build: delete variable
Jagadeesh Ujja (2):
SecurityPkg/AuthVariableLib: allow MM_STANDALONE drivers to use this library
MdePkg/Include: add MmServicesTableLib header file
Jeff Brasen (5):
MdeModulePkg/SdDxe: Fix potential NULL pointer access
EmbeddedPkg/PrePiMemoryAllocationLib: Added AllocateZeroPool()
MdeModulePkg/BaseSortLib: Enable for all module types
ArmPkg/ArmScmiDxe: Add clock enable function
EmbeddedPkg/PrePiLib: Correct function name
Jian J Wang (7):
CryptoPkg/IntrinsicLib: add missing BaseLib declaration
Upgrade OpenSSL to 1.1.0j
CryptoPkg/BaseCryptLib: split CryptPkcs7Verify.c on behalf of runtime
MdePkg/UefiDevicePathLib: Add sanity check for FilePath device path
MdePkg/UefiDevicePathLibDevicePathProtocol: Add sanity check for FilePath device path
UefiCpuPkg: restore strict page attributes via #DB in nonstop mode only
Maintainers.txt: remove unexpected unicode BOM
Jiaxin Wu (7):
MdeModulePkg/Dhcp4Dxe: Remove unnecessary NULL pointer check.
NetworkPkg/IScsiDxe: Remove unnecessary NULL pointer check.
NetworkPkg/DnsDxe: Remove unnecessary NULL pointer check.
MdeModulePkg/Ip4Dxe: Uninstall protocols when error happen in Driver Binding Start.
NetworkPkg/Ip6Dxe: Uninstall protocols when error happen in Driver Binding Start.
NetworkPkg/Ip6Dxe: Clean the invalid IPv6 configuration during driver start.
NetworkPkg/DnsDxe: [CVE-2018-12178] Check the received packet size before parsing the message.
Jiewen Yao (6):
MdeModulePkg/LockboxNullLib: clean up INF file.
BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
MdePkg/Include: Add Nasm.inc
MdePkg/BaseLib: Add Shadow Stack Support for X86.
UefiCpuPkg/ExceptionLib: Add CET support.
UefiCpuPkg/PiSmmCpu: Add Shadow Stack Support for X86 SMM.
Jordan Justen (1):
OvmfPkg/build.sh: Enable flash for qemu 3 or later
Julien Grall (1):
Maintainers.txt: Update e-mail address for Julien Grall
Krzysztof Koch (1):
ShellPkg/UefiShellAcpiViewCommandLib: Add support for PPTT
Laszlo Ersek (47):
EmulatorPkg: require GCC48 or later
OvmfPkg: require GCC48 or later
Vlv2TbltDevicePkg: assume GCC48 or later
BaseTools/tools_def.template: fix up LF-only line terminator
BaseTools/tools_def.template: strip trailing whitespace
BaseTools/tools_def.template: remove GCC48_IA32_X64_DLINK_COMMON dead-end
BaseTools/tools_def.template: remove GCC47 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC47 references
BaseTools/tools_def.template: remove GCC47 documentation
BaseTools/tools_def.template: remove GCC46 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC46 references
BaseTools/tools_def.template: remove GCC46 documentation
BaseTools/tools_def.template: remove GCC45 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC45 references
BaseTools/tools_def.template: remove GCC45 documentation
BaseTools/tools_def.template: remove GCC44 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC44 references
BaseTools/tools_def.template: rename GCC44_ALL_CC_FLAGS to GCC48_ALL_CC_FLAGS
BaseTools/tools_def.template: eliminate GCC44_IA32_X64_DLINK_FLAGS
BaseTools/tools_def.template: rename GCC44_IA32_X64_DLINK_COMMON to GCC48_IA32_X64_DLINK_COMMON
BaseTools/tools_def.template: remove comment about GCC44 + LzmaF86Compress
BaseTools/tools_def.template: remove GCC44 documentation
ArmPkg/ArmSoftFloatLib: drop build flags specific to GCC46/GCC47
CryptoPkg/BaseCryptLib: drop build flags specific to GCC44
Revert "MdePkg: avoid __builtin_unreachable() on GCC v4.4"
BaseTools/BuildReport: fix report for platforms/arches without struct PCDs
ArmVirtPkg/ArmVirtQemuKernel: don't set PcdCPUCoresStackBase
ArmVirtPkg: don't set PcdRelocateVectorTable
ArmVirtPkg/{ArmVirtQemu,ArmVirtQemuKernel}: don't set PcdTrustzoneSupport
ArmVirtPkg: don't set PcdPostCodePropertyMask
ArmVirtPkg: clean up PcdSetNxForStack setting (applies to ArmVirtQemu only)
ArmVirtPkg/PrePi: drop wrong PcdCoreCount dependency
ArmVirtPkg: don't set PcdCoreCount
ArmVirtPkg: don't set PcdDebugClearMemoryValue
ArmVirtPkg: don't set PcdDebugPrintErrorLevel in RELEASE builds
ArmVirtPkg/ArmVirtXen: don't set PcdPL031RtcBase
ArmVirtPkg/ArmVirtXen: don't set PcdTerminalTypeGuidBuffer
ArmVirtPkg/ArmVirtXen: don't set PcdShellFile
ArmVirtPkg/ArmVirtXen: don't set PcdTurnOffUsbLegacySupport
ArmVirtPkg/ArmVirtXen: don't set Pcd*ImageVerificationPolicy
Maintainers: add TPM2 reviewers for OvmfPkg
Maintainers: specify the scope for OvmfPkg/ArmVirtPkg Xen module reviewers
MdeModulePkg/UefiBootManagerLib: fix LoadImage/StartImage status code rep.
OvmfPkg: add library to track boot option loading/starting on the console
OvmfPkg/PlatformBootManagerLib: display boot option loading/starting
ArmVirtPkg/ArmVirtQemu*: enable minimal Status Code Routing in DXE
ArmVirtPkg/PlatformBootManagerLib: display boot option loading/starting
Leif Lindholm (8):
ArmPkg: fix StandaloneMmMmuLib subdirectory case
ArmPkg: drop ArmBds remnant Pcds from .dec
ArmPkg: delete unused ArmTrustZoneSmc.h
AppPkg: fix webserver build for !Ia32/X64
IntelFrameworkModulePkg: fix build for AARCH64/ARM
IntelFrameworkPkg: fix build for AARCH64/ARM
SecurityPkg: fix package build on ARM
SignedCapsulePkg: enable package build for AARCH64/ARM
Liming Gao (12):
OvmfPkg: Don't include TftpDynamicCommand in XCODE5 tool chain
MdeModulePkg PCD: Add DynamicEx PcdVpdBaseAddress64 for non SPI platform
Maintainers.txt: Add the rule to hand over the package maintain role
BaseTools Script: Update ConvertFceToStructurePcd to report warning messages
MdeModulePkg: Correct PCD name in MdeModulePkg.uni
Readme.md: Add edk2 release tag and edk2 release plan
BaseTools GenFw: Fix XCODE5 build issue
BaseTools VolInfo: Fix XCODE5 build issue
BaseTools: Update PYTHON env to PYTHON_COMMAND
MdeModulePkg DxeCapsuleLibFmp: Update SupportCapsuleImage() for Fake Capsule
BaseTools: Remove unused txt files
Revert "BaseTools:BaseTools supports to the driver combination."
Liu Yu (1):
EmulatorPkg/build.sh: Fix 'run' path to simulator host executable
Marcin Wojtas (2):
MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhase
MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency
Max Knutsen (1):
MdeModulePkg/ReportStatusCodeLib: Avoid using AllocatePool if possible
Meenakshi Aggarwal (1):
EmbeddedPkg: Fix Command Argument for SD/eMMC R/W operation.
Mike Maslenkin (1):
UefiCpuPkg/CpuExceptionHandlerLib: Fix spelling issue
Mike Turner (4):
MdePkg/BaseLib: Introduce CharToUpper and AsciiCharToUpper publicly
MdePkg/UefiDevicePathLib: Add a checking step
BaseTools/DevicePath: Add a checking step
MdePkg/BaseLib: Add Base64Encode() and Base64Decode()
Pete Batard (2):
EmbeddedPkg/Library: Add VirtualRealTimeClockLib
EmbeddedPkg/VirtualRealTimeClockLib: Fix correctness issues
Philippe Mathieu-Daude (1):
BaseTools: Fix build failure when specifying multiple BUILDTARGET
Ray Ni (10):
MdeModulePkg/PciBus: Shadow option ROM after BARs are programmed
MdeModulePkg/PciBus: Fix system hang when no PCI Option ROM exists
Maintainers.txt: Update mail address
MdeModulePkg/PciBus: Change PCI_IO_DEVICE.RomSize to UINT32 type
MdeModulePkg/PciBus: Correct typos
MdeModulePkg/PciBus: Fix a bug PPB MEM32 BAR isn't restored sometimes
UefiCpuPkg/MtrrLib: Fix a bug that may wrongly set memory <1MB to UC
ShellBinPkg: Ia32/X64 Shell binary update.
MdeModulePkg/HiiDatabase: Fix potential integer overflow (CVE-2018-12181)
MdeModulePkg/HiiImage: Fix stack overflow when corrupted BMP is parsed (CVE-2018-12181)
Sami Mujawar (36):
Maintainers.txt: Change DynamicTablesPkg maintainer
DynamicTablesPkg: Dynamic Tables Framework
DynamicTablesPkg: Table Generator definition
DynamicTablesPkg: Acpi Table Generator
DynamicTablesPkg: SMBIOS Table Generator
DynamicTablesPkg: DT Table Generator
DynamicTablesPkg: Standard NameSpace Objects
DynamicTablesPkg: Arm NameSpace Objects
DynamicTablesPkg: Configuration Manager Objects
DynamicTablesPkg: Configuration Manager Protocol
DynamicTablesPkg: Configuration Manager Helper
DynamicTablesPkg: Table Helper Library
DynamicTablesPkg: Dynamic Table Factory Protocol
DynamicTablesPkg: Dynamic Table Factory Dxe
DynamicTablesPkg: Dynamic Table Manager Dxe
DynamicTablesPkg: Arm Raw/DSDT/SSDT Generator
DynamicTablesPkg: Arm ACPI FADT Generator
DynamicTablesPkg: Arm ACPI MADT Generator
DynamicTablesPkg: Arm ACPI GTDT Generator
DynamicTablesPkg: Arm SPCR Table Generator
DynamicTablesPkg: Arm DBG2 Table Generator
DynamicTablesPkg: Arm PCI MCFG Table Generator
DynamicTablesPkg: Arm IORT Table Generator
DynamicTablesPkg: Fix protocol section
DynamicTablesPkg: Rename enum used for ID Mapping
DynamicTablesPkg: Add OEM Info
DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI
DynamicTablesPkg: Remove GIC Distributor Id field
DynamicTablesPkg: Minor updates and fix typos
ArmPkg: Fix writes to GICv3 GICD_IROUTER<n> reg
Revert "DynamicTablesPkg: Minor updates and fix typos"
Revert "DynamicTablesPkg: Remove GIC Distributor Id field"
Revert "DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI"
Revert "DynamicTablesPkg: Add OEM Info"
Revert "DynamicTablesPkg: Rename enum used for ID Mapping"
Revert "DynamicTablesPkg: Fix protocol section"
Sean Brogan (1):
MdeModulePkg/NvmExpressDxe: Report StatusCode for device init failure
Shenglei Zhang (37):
EmulatorPkg: Remove EdkShellBinPkg in FDF and DEC
Nt32Pkg: Remove EdkShellBinPkg in FDF and DEC
OvmfPkg: Remove EdkShellBinPkg in FDF
Vlv2TbltDevicePkg: Remove EdkShellBinPkg with ShellPkg
EdkShellBinPkg: Remove EdkShellBinPkg
EdkShellPkg: Remove EdkShellPkg
Maintainers.txt: Remove EdkShellPkg and EkdShellBinPkg
UnixPkg: Remove UnixPkg and update Maintainers.txt
MdeModulePkg: Remove PcdIdentifyMappingPageTablePtr
ShellPkg: Remove ShellPkg wrapper header files
BaseTools: Remove GenVtf
DuetPkg: Remove DuetPkg
BaseTools: Remove tools only used by DuetPkg
Maintainers.txt: Remove DuetPkg
ShellPkg/UefiShellDebug1CommandsLib: Remove the unused function CharToUpper
MdeModulePkg/EbcDebugger: Change function names
MdePkg/BaseLib: Remove definitions of two functions
MdeModulePkg/EbcDebugger: Use AsciiCharToUpper and CharToUpper
MdeModulePkg/DxeHttpLib: Use BaseLib api AsciiCharToUpper
ShellPkg/Shell: Use BaseLib api CharToUpper
ShellPkg/UefiShellLib: Use BaseLib api CharToUpper
MdePkg: Change function parameter type
MdeModulePkg/S3SaveStateDxe: Change function parameter types
MdeModulePkg/SmmS3SaveStateDxe: Change function parameter types
BaseTools/tools_def.template: Remove CYGGCC
OptionRomPkg/ReadMe.txt: Remove CYGGCC
BaseTools: Update MYTOOLS
BaseTools/tools_def.template: Remove VS2003 and VS2005
OptionRomPkg/ReadMe.txt: Remove VS2005
BaseTools/tools_def.template: Remove UNIXGCC
OvmfPkg/README: Remove UNIXGCC
BaseTools/tools_def.template: Remove ELFGCC
BaseTools/tools_def.template: Remove DDK3790
BaseTools/build_rule.template: Remove GCCLD
MdePkg/BaseLib: Change a variable type in a bitwise operation
MdeModulePkg/PropertiesTableAttributesDxe: Remove this driver
IntelSiliconPkg/MicrocodeUpdateDxe: Error message enhancement
Siyuan Fu (8):
ArmVirtPkg: Replace obsoleted network drivers from platform DSC/FDF.
ArmVirtPkg: Remove redundant library instances in ArmVirtQemuKernel.dsc
MdeModulePkg: Delete Tcp4Dxe in MdeModulePkg.
NetworkPkg: Remove some clarification from TcpDxe.inf
MdeModulePkg: Delete IScsiDxe in MdeModulePkg.
NetworkPkg: Remove some clarification from IScsiDxe.inf
MdeModulePkg: Delete UefiPxeBcDxe in MdeModulePkg.
NetworkPkg: Remove some clarification from UefiPxeBcDxe.inf
Solanki, Digant H (1):
IntelSiliconPkg\Include\IndustryStandard: Update IGD_OPREGION_MBOX3 Structure
Songpeng Li (3):
ShellPkg/TftpDynamicCommand: Change file writing method in tftp
NetworkPkg/IScsiDxe: Remove unused global variables.
NetworkPkg/Dhcp6Dxe: Remove an unused global variable.
Star Zeng (30):
Maintainers.txt: Update FmpDevicePkg maintainer
Maintainers.txt: Update MdeModulePkg maintainers
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxPeimPerFv
SecurityPkg Tcg(2)Pei: Remove the using of PcdPeiCoreMaxFvSupported
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxFvSupported
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxPpiSupported
OvmfPkg: Remove PcdPeiCoreMaxXXX PCDs' statement
Vlv2TbltDevicePkg: Remove PcdPeiCoreMaxXXX PCDs' statement
MdeModulePkg: Remove PcdPeiCoreMaxXXX PCDs
MdeModulePkg Variable: Add some missing changes for 9b18845
MdeModulePkg Variable: Abstract InitRealNonVolatileVariableStore
MdeModulePkg Variable: Move "extern XXX" to Variable.h
MdeModulePkg Variable: Not get NV PCD in VariableWriteServiceInitialize
MdeModulePkg Variable: Abstract VariableWriteServiceInitializeDxe/Smm
MdeModulePkg Variable: Remove CacheOffset in UpdateVariable()
MdeModulePkg Variable: type case VolatileBase to UINTN directly
MdeModulePkg: Add PcdEmuVariableNvModeEnable in dec
MdeModulePkg: Refine description a little for PcdEmuVariableNvStoreReserved
MdeModulePkg Variable: Add emulated variable NV mode support
MdeModulePkg VariablePei: Don't check BOOT_IN_RECOVERY_MODE
ArmVirtXen: Use merged variable driver for emulated NV mode
ArmVirtXen: Link VarCheckUefiLib NULL class library instance
BeagleBoardPkg: Use merged variable driver for emulated NV mode
QuarkMin: Use merged variable driver for emulated NV mode
CorebootPayloadPkg: Use merged variable driver for emulated NV mode
MdeModulePkg VariableStandaloneMm: Add PcdEmuVariableNvModeEnable in inf
MdeModulePkg: Remove EmuVariableRuntimeDxe
MdeModulePkg/PeiCore: Ensure FfsFileHeader 8 bytes aligned
MdeModulePkg/DxeCore: Ensure FfsFileHeader 8 bytes aligned
IntelFrameworkModulePkg/FwVolDxe: Ensure FfsFileHeader 8 bytes aligned
Stefan Berger (1):
OvmfPkg: Add TCG2 Configuration menu to the Device Manager menu
Sughosh Ganu (3):
ArmPkg/Include: Fix the SPM version SVC ID
StandaloneMM: Include the newly added library class for MMU functions
StandaloneMM: Update permissions for Standalone MM drivers memory area
Sumit Garg (2):
ArmPkg/OpteeLib: Add dummy RPC handler
ArmPkg/OpteeLib: Add OPTEE_SUCCESS return code
Sun, Zailiang (1):
Maintainers.txt: update Vlv2*Pkg maintainers.
Tomasz Michalec (2):
MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol
MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverride
Vijayenthiran Subramaniam (2):
MdeModulePkg/Variable: add debug logs in VariableServiceSetVariable
NetworkPkg/IScsiDxe: add debug logs for failed SetVariable attempts
Vladimir Olovyannikov (1):
MdeModulePkg/NonDiscoverablePciDeviceDxe: add missing validation
Vladimir Olovyannikov via edk2-devel (1):
ShellPkg/TftpDynamicCommand: Return proper status
Wang Fan (2):
NetworkPkg: Add WiFi Connection Manager to NetworkPkg
NetworkPkg: Fix Duplicate FreePool Error in WCM
Ye Ting (1):
Maintainers.txt: Change package maintainer and reviewer of CryptoPkg.
Yonghong Zhu (1):
Maintainers.txt: Update BaseTools maintainers
Yunhua Feng (3):
BaseTools: nametuple not have verbose parameter in python3
BaseTools: Remove unnecessary super function
BaseTools: replace long by int
Zhang, Chao B (6):
SecurityPkg: TCG Add more Event type
SecurityPkg: Update TCG PFP spec revision.
SecurityPkg/Tcg: Fix Warnings and Remarks reported by IASL
SecurityPkg/TCG: Upgrade UEFI supporting TCG spec info
MdeModulePkg:Tpm2Acpi.h: Upgrade UEFI supporting TCG spec info
Maintainers.txt: Change package maintainer and reviewer of SecurityPkg.
Zhao, ZhiqiangX (1):
BaseTools: AutoGen and GenFds share the parser data.
Zhichao Gao (8):
ShellPkg: add array index check for shell delay option
MdeModulePkg: change the function name ResetSystem
MdeModulePkg: Add the new API ResetSystem in the head file
MdeModulePkg: Add a new API ResetSystem for DXE ResetSystemLib
MdeModulePkg: Add a new API ResetSystem for Null version
MdeModulePkg: Add a new API ResetSystem for PEI ResetSystemLib
MdeModulePkg: Add a runtime library instance of ResetSystemLib
MdeModulePkg: Add the runtime ResetSystemLib in MdeModulePkg.dsc
Zhijux Fan (38):
BaseTools: Update nasm file build rule to support $(INC)
BaseTools: Add $(INC)-like support when compiling .nasm files
BaseTools:Build fail when PCD use in the [DEPEX] section of INF files
BaseTools:build break if the Path contains SingleFile.Ext
BaseTools:The BuildOptionPcd value is wrong
BaseTools: Fix Pcd Array changes build report issue.
BaseTools:Define Macro in Inf file, the pcdvalue Can't convert
BaseTool:Rename xrange() to range()
BaseTools:use iterate list to replace the itertools
BaseTools: Rename iteritems to items
BaseTools: replace get_bytes_le() to bytes_le
BaseTools:Solve the data sorting problem use python3
BaseTools: Update argparse arguments since it not have version now
BaseTools:Similar to octal data rectification
BaseTools/UPT:merge UPT Tool use Python2 and Python3
BaseTools: update Test scripts support python3
BaseTools/Scripts: Porting PackageDocumentTools code to use Python3
Basetools: It went wrong when use os.linesep
BaseTools:Fv BaseAddress must set If it not set
BaseTools:TestTools character encoding issue
BaseTools:Double carriage return inserted from Trim.py on Python3
BaseTools: change the Division Operator
BaseTools:There is extra blank line in datalog
BaseTools: Similar to octal data rectification
BaseTools: Update windows and linux run scripts file to use Python3
BaseTools:Update build tool to print python version information
BaseTools:Linux Python highest version check.
BaseTools: PCD value incorrect in structure pcd sku case.
BaseTools:StructurePCD value display incorrect in "Not used" section.
BaseTools:Fix a ECC issue
BaseTools:BaseTools supports to the driver combination.
BaseTools:Fixed build failure when specifying multiple BUILDTARGET
BaseTools:PCD value error in structure pcd sku case.
BaseTools:Build fail if define [DEPEX] in library inf
BaseTools:Some build generated files content are not ordered on linux
BaseTools:PackageDocumentTools import lib error occurs.
BaseTools:The BOM character is processed when python reads a file
BaseTools:Run packagedoc_cli.py to generate doc failed
yuchenlin (5):
Revert "OvmfPkg/QemuVideoDxe: list "UnalignedIoInternal.h" in the INF file"
Revert "OvmfPkg/QemuVideoDxe: VMWare SVGA device support"
Revert "OvmfPkg/QemuVideoDxe: Helper functions for unaligned port I/O."
Revert "OvmfPkg: VMWare SVGA display device register definitions"
OvmfPkg: simply use the Bochs interface for vmsvga
zwei4 (1):
Vlv2TbltDevicePkg:Fix build and boot failure of Minnowboard Max platform.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Adapt the qemu_edk2_get_toolchain() function in "roms/edk2-funcs.sh" in
advance to edk2 commit 8d7cdfae8cb8 ("OvmfPkg: require GCC48 or later",
2019-01-08), which is part of the "edk2-stable201903" tag.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Extract the dense logic for architecture and toolchain massaging from
"tests/uefi-test-tools/build.sh", to a set of small functions. We'll reuse
these functions for building full platform firmware images.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Since commit f590a812c2 we build the EDK2 EfiRom utility
unconditionally.
Some distributions require to use extra compiler/linker flags,
i.e. SUSE which enforces the PIE protection (see [*]).
EDK2 build tools already provide a set of variables for that,
use them to allow the caller to easily inject compiler/linker
options..
Now build scripts can pass extra options, example:
$ make -C roms \
EDK2_BASETOOLS_OPTFLAGS='-fPIE' \
efirom
[*] https://lists.opensuse.org/opensuse-factory/2017-06/msg00403.html
Reported-by: Olaf Hering <olaf@aepfle.de>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190409134536.15548-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The iPXE's 'veryclean' recipe removes $(EFIROM) even if the EFIROM
macro originates from elsewhere:
$ git checkout f590a812c21~
$ make -C roms clean EFIROM=$(type -P EfiRom)
make: Entering directory '/source/qemu/roms'
[...]
make -C ipxe/src veryclean
make[1]: Entering directory '/source/qemu/roms/ipxe/src'
rm -f bin{,-*}/*.* bin{,-*}/.certificate.* bin{,-*}/.certificates.* bin{,-*}/.private_key.* bin{,-*}/errors bin{,-*}/NIC ./util/zbin ./util/elf2efi32 ./util/elf2efi64 /usr/bin/EfiRom ./util/efifatbin ./util/iccfix ./util/einfo TAGS bin{,-*}/symtab
rm: cannot remove '/usr/bin/EfiRom': Permission denied
make[1]: *** [Makefile.housekeeping:1564: clean] Error 1
make[1]: Leaving directory '/source/qemu/roms/ipxe/src'
make: *** [Makefile:152: clean] Error 2
make: Leaving directory '/source/qemu/roms'
Before f590a812c2 this variable could be overridden or unset,
and the 'veryclean' Makefile rule would not complain.
Commit f590a812c2 enforces this variable to the Intel EfiRom
tool provided by the EDK2 project.
To avoid the name clash and make the difference between the
projects obvious, rename the variable used by the EDK2 project
as EDK2_EFIROM.
Fixes: f590a812c2
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190409134536.15548-2-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report machine checks to the kernel.
It is now using these for probing missing devices.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It includes better support for POWER9 processor and the QEMU platform.
DD1.0 workarounds have been removed which simplifies a bit the XIVE
PowerNV model.
Built from submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190310175338.22266-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch fixes two issues in the hppa/parisc emulation:
1. The CPU HPA was wrong in the sense that we had negative module
offsets in the firmware-internal module table (which we ignored up to
now). Get it correct by changing the CPU HPA to 0xfffb0000 which is
greater than the DINO_HPA of 0xfff80000.
This change requires the seabios-firmware update.
2. Sven noticed that the FPU register cr10 is only able to reference up
to 8 FPUs, so let's reduce the maximum amount of SMP CPUs too.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190315164130.GA7800@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2019.01 to make sure users don't feel
like they're using out of date software.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20190304103930.16319-1-agraf@csgraf.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Building the EfiRom utility from "roms/edk2/BaseTools" should make
"roms/Makefile" more self-contained. Otherwise, we'd call the system-wide
EfiRom for building the combined iPXE option ROMs, but call the sibling
utilities from "roms/edk2/BaseTools" for building "roms/edk2" content.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190204160325.4914-3-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
implemented later),
- build the EfiRom tool on the fly, which is used in roms/Makefile, for
building the "efirom" target,
- build UEFI test applications (to be run in guests), for qtest support.
Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest
"stable tag", namely "edk2-stable201811".
The edk2 repository tracks some binary files that should not be removed by
QEMU's top-level "make clean"; exempt the full pathnames from the "find"
command.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190204160325.4914-2-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This update to qemu_vga.ndrv includes the following changes:
- Build guest resolution list from QEMU EDID data if enabled
- Fixes to re-enable 256 color mode
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes spapr-vio and usb-storage fixes, phandles fix for NVLink2
pass through support and other compile improvements.
The full list of changes is:
* vio-vscsi: Support multiple channels / buses
* board-qemu/slof/vio-vscsi: Scan up to 64 SCSI IDs
* usb/storage: Implement block write support
* usb/storage: Invert the logic of the IF-statements
* fdt: Fix phandles for NVLink/NVLink2
* fdt: Factor out code to replace a phandle in place
* pci: use appropriate base class ids
* Makefile: Set a proper DRIVER_NAME when building from a git tree
* romfs/tools: Silence more compiler warnings with GCC 8.1
* romfs/tools: Silence GCC 8.1 compiler warning with FLASHFS_MAGIC
* romfs/tools: Remove superfluous union around the rom header struct
* make.rules: Compile SLOF with -fno-asynchronous-unwind-tables
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
git shortlog ipxe-qemu-20170717-0600d3ae94-0..ipxe-qemu-20190122-de4565cbe7-0
-----------------------------------------------------------------------------
Aaron Young (1):
[libc] Fix strcmp()/strncmp() to return proper values
Ameer Mahagneh (1):
[golan] Set log_max_qp to 1
Bruce Rogers (1):
[build] Disable gcc stringop-truncation warnings
Christian Hesse (1):
[build] Handle R_X86_64_PLT32 from binutils 2.31
Hannes Reinecke (1):
[iscsi] Parse IPv6 address in root path
Heinrich Schuchardt (2):
[efi] Accept (and ignore) R_ARM_V4BX relocations
[efi] Add support for R_ARM_REL32 relocations
Ignat Korchagin (1):
[efi] Fix error handling path in efi_snp_probe
Janos Mattyasovszky (1):
[intel] Add PCI device ID for X550-T2
Joseph Wong (1):
[tg3] Add support for SerDes PHY initialization
Ladi Prosek (1):
[crypto] Fail fast if cross-certificate source is empty
Laurent Gourvénec (1):
[acpi] Compute and check checksum for ACPI tables
Martin Habets (2):
[netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported()
[sfc] Add support for X25xx adapters
Michael Brown (88):
[efi] Enumerate PCI BARs in same order as SnpDxe
[build] Conditionalise use of -mabi=lp64 for ARM64 builds
[build] Fix use of inline assembly on GCC 4.8 ARM64 builds
[build] Fix ARM32 EFI builds with current EDK2 headers
[acpi] Fix spurious uninitialised-variable warning on some gcc versions
[hyperv] Do not steal ownership from the Gen 2 UEFI firmware
[shell] Enable "shell" command even when BANNER_TIMEOUT is zero
[romprefix] Avoid unaligned accesses within ROM headers
[malloc] Avoid false positive warnings from valgrind
[linux] Impose receive quota on tap driver
[efi] Raise TPL when calling UNDI entry point
[netdevice] Cancel all pending transmissions on any transmit error
[monojob] Check for job progress only once per timer tick
[job] Allow jobs to report an arbitrary status message
[downloader] Allow underlying downloads to provide detailed job progress
[monojob] Display job status message, if present
[peerdist] Gather and report peer statistics during download
[netdevice] Add "hwaddr" setting
[resolv] Use pass-through interfaces for name resolution multiplexer
[dns] Report current DNS query as job progress status message
[efi] Check buffer length for packets retrieved via our SNP protocol
[efi] Match behaviour of SnpDxe for truncated received packets
[dns] Ensure DNS names are NUL-terminated when used as diagnostic strings
[efi] Continue to connect remaining handles after connection errors
[build] Exclude selected directories from Secure Boot builds
[efi] Inhibit our driver Start() method during disconnection attempts
[efi] Allow for building with older versions of elf.h system header
[crypto] Fix endianness typo in comment
[crypto] Eliminate repetitions in MD5 round constant table
[crypto] Add MD4 message digest algorithm
[ntlm] Add support for NTLM authentication mechanism
[http] Gracefully handle offers of multiple authentication schemes
[http] Handle parsing of WWW-Authenticate header within authentication scheme
[http] Add support for NTLM authentication
[xen] Skip probing of any unsupported device types
[http] Include error messages for 4xx and 5xx response codes
[http] Report unsuccessful response status lines at DBGVL_LOG
[image] Omit URI query string and fragment from download progress messages
[legal] Add missing FILE_LICENCE declarations
[legal] Add missing FILE_LICENCE declarations
[build] Avoid use of "ld --oformat binary"
[ena] Add driver for Amazon ENA virtual function NIC
[skel] Remove MII interface
[ena] Fix spurious uninitialised variable warning on older versions of gcc
[xhci] Assume an invalid PSI table if any invalid PSI value is observed
[intel] Work around broken reset mechanism in i219 devices
[http] Allow for domain names within NTLM user names
[xhci] Consume event TRB before reporting completion to USB core
[efi] Run at TPL_CALLBACK to protect against UEFI timers
[efi] Raise TPL within EFI_SIMPLE_NETWORK_PROTOCOL entry points
[efi] Raise TPL within EFI_USB_IO_PROTOCOL entry points
[process] Include process name in debug messages
[efi] Drop to TPL_APPLICATION when gathering entropy
[efi] Raise TPL within EFI_DRIVER_BINDING_PROTOCOL entry points
[librm] Add facility to provide register and stack dump for CPU exceptions
[golan] Do not assume all devices are identical
[lacp] Mark link as blocked if partner is not yet up and running
[lacp] Fix debug message to match documentation
[tftp] Prevent potential division by zero
[profile] Prevent potential division by zero
[ocsp] Centralise test for whether or not an OCSP check is required
[ocsp] Allow OCSP checks to be disabled
[lacp] Check the partner's own state when checking for blocked links
[efi] Provide Map_Mem() and associated UNDI callbacks
[time] Add support for the ACPI power management timer
[rng] Use fixed-point calculations for min-entropy quantities
[build] Prevent use of MMX and SSE registers
[undi] Treat invalid IRQ numbers as non-fatal errors
[librm] Provide symbols for inline code placed into other sections
[librm] Ensure that inline code symbols are unique
[tls] Ensure received data list is initialised before calling tls_free()
[list] Add list_is_first_entry() and list_is_last_entry()
[tls] Rename tls_session to tls_connection
[tls] Ensure that window change is propagated to plainstream interface
[efi] Release SNP devices before starting SAN boot image
[efi] Do not raise TPL within EFI_DRIVER_BINDING_PROTOCOL.Supported()
[undi] Include subsystem IDs in broken interrupt device check
[rhine] Fix usage of mii_read()
[velocity] Fix usage of mii_read() and mii_write()
[mii] Separate concepts of MII interface and MII device
[tcp] Add missing packed attribute on struct tcp_header
[mii] Fix typo in parameter name
[http] Work around stateful authentication schemes
[build] Use positive-form tests when checking for supported warnings
[rndis] Clean up error handling path in register_rndis()
[ethernet] Use standard 1500 byte MTU unless explicitly overridden
[intelxl] Add driver for Intel 40 Gigabit Ethernet NICs
[zbin] Fix compiler warning with GCC 9
Peter von Konigsmark (2):
[exanic] Power up optical PHYs (if present)
[exanic] Add PCI device ID for another X40 variant
Petr Borsodi (3):
[pci] Correct invalid base-class/sub-class/prog-if order in PCIR
[util] Improve processing of ROM images in Option::ROM
[util] Add support for EFI ROM images
Richard Moore (1):
[intel] Add various PCI device IDs
Rob Taglang (3):
[intel] Add PCI_ROM entry for Intel i354 NIC
[intelx] Add PCI_ROM entry for Intel X553 NIC
[efi] Exclude link-layer header length from MaxPacketSize
Robin Smidsrød (1):
[util] Support reversed sort ordering when generating NIC list
Roman Kagan (2):
[rndis] Register netdev with MAC filled
[vmbus] Do not expect version in version_response
Steven Haber (1):
[intelx] Add support for Intel X552 NIC
Sylvie Barlow (3):
[mii] Add mii_find()
[mii] Add bit-bashing interface
[icplus] Add driver for IC+ network card
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SeaBIOS introduced CROSS_PREFIX in 2013 but it's not set in roms
Makefile.
With the change it's possible to cross-compile SeaBIOS on macOS,
if acpica/iasl is installed:
cd roms
export PATH=/path/to/cross/x86_64-unknown-linux-gnu/bin:$PATH
make bios system=unknown-linux-gnu
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20181121203720.75916-1-r.bolshakov@yadro.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Seabios 1.12 has been released yesterday. Update
our snapshot builds to the final release.
git shortlog
============
Kevin O'Connor (2):
shadow: Rework bios copy code to prevent gcc array-bounds warning
docs: Note v1.12.0 release
Shmuel Eiderman (1):
pvscsi: Scan all 64 possible targets
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
seabios 1.12 release is planned for november.
update seabios to a master branch snapshot so it gets more testing
and to make the delta smaller when updating to -final during freeze.
git shortlog rel-1.11.2..14221cd86e
===================================
Gerd Hoffmann (12):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
pretty boot menu entry for cdrom drives
Jing Liu (3):
pci: fix the return value for truncated capability
pci: clean up the debug message for pci capability found
pci: recognize RH PCI legacy bridge resource reservation capability
Kevin O'Connor (8):
docs: Add sercon-port to Runtime_config.md documentation
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
build: Use git describe --always
docs: Update Download.md to use git clone via https
ssdt: Fix building of legacy acpi tables on current iasl compiler
docs: Update download file link
sdcard: Increase SDHCI_POWER_ON_TIME to 5ms
Marc-André Lureau (4):
x86: add readq()
tpm: generalize init_timeout()
tpm: use get_tpm_version() callback
tpm: add TPM CRB device support
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Matt DeVillier (2):
nvme: fix I/O queue length calculation overflow
SeaVGABios/cbvga: Fix bpp for coreboot framebuffer
Nikolay Nikolov (11):
floppy: Introduce the floppy_dor_read() function
floppy: Introduce floppy_dor_mask()
floppy: Introduce FLOPPY_DOR_XXX constants
floppy: Preserve motor and drive sel bits when resetting the floppy controller
floppy: Reset the floppy motor count in floppy_drive_pio()
floppy: Use timer_check() in floppy_wait_irq()
floppy: hold the DOR reset bit low for 4 microseconds, when resetting
floppy: Execute a SPECIFY command after sensing the media type
floppy: Support up to 4 floppy drives when turning on the floppy motor
floppy: Wait for the floppy motor to reach a stable speed, after starting
floppy: Send 4 sense interrupt commands during controller initialization
Paul Menzel (1):
docs/Download: Use more secure HTTPS URLs where possible
Stefan Berger (5):
tpm: Add support for TPM2 ACPI table
tpm: Wait for tpmRegValidSts flag on CRB interface before probing
tpm: revert return values for successful/failed CRB probing
tpm: when CRB is active, select, lock it, and check addresses
tpm: Request access to locality 0
Stephen Douthit (3):
tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
tpm: Wait for interface startup when probing
tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes gcc8.1 fixes and the image is compiled using gcc 8.1 as well.
The full list of changes is:
> Fix bad assembler statements for compiling with gcc 8.1 / as 2.30
> libelf: Add REL32 to the list of ignored relocations
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Update the submodule and u-boot-sam460-20100605.bin to include
following fixes from Sebastian Bauer:
- Fix build with newer gcc
- Decrease unnecessary delay which fixes slow booting from CD
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's the old, lgpl vgabios implementation.
Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressions. It's unused since years
now, reportedly doesn't even build, and lacks support for recently (and
not so recently) added display devices.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QNX reportedly requires this to boot.
Should also speed up booting other guests.
Note: Upstream seabios defaults this to 'n' to due to known problems
on physical hardware (qemu not affected), and wouldn't flip the default
to 'y'. So we adjust our local build config accordingly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Both bochs-display and ramfb are devices with a simple framebuffer and
no vga emulation or text mode. seavgabios has support for text mode
emulation (at vgabios call level), we are using that to provide some
vga compatibility support for these devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
git shortlog rel-1.11.1..rel-1.11.2
-----------------------------------
Gerd Hoffmann (11):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The changes are:
1. fixed broken_sc1;
2. added switching between boot consoles;
3. added PXE boot.
The full list is:
> lib/libnet/pxelinux: Fix two off-by-one bugs in the pxelinux.cfg parser
> lib/libnet/pxelinux: Make the size handling for pxelinux_load_cfg more logical
> libc: Add a simple implementation of an assert() function
> libnet: Support UUID-based pxelinux.cfg file names
> slof: Add a helper function to get the contents of a property in C code
> libnet: Add support for DHCPv4 options 209 and 210
> libnet: Wire up pxelinux.cfg network booting
> libnet: Add functions for downloading and parsing pxelinux.cfg files
> libnet: Put code for determing TFTP error strings into a separate function
> libc: Add the snprintf() function
> libnet: Pass ip_version via struct filename_ip
> resolve ihandle and xt handle in the input command (like for the output)
> Fix output word
> obp-tftp: Make sure to not overwrite paflof in memory
> libnet: Get rid of unused huge_load and block_size parameters
> libc: Check for NULL pointers in free()
> libc: Implement strrchr()
> libnet: Get rid of unnecessary (char *) casts
> broken_sc1: check for H_PRIVILEGE
> OF: Use new property "stdout-path" for boot console
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
-----BEGIN PGP SIGNATURE-----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=hMax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180619' into staging
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
# gpg: Signature made Tue 19 Jun 2018 10:33:06 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180619:
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
s390x/cpumodels: add z14 Model ZR1
s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW
vfio-ccw: remove orb.c64 (64 bit data addresses) check
vfio-ccw: add force unlimited prefetch property
virtio-ccw: clean up notify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a mirror of this repo on git.qemu.org change the
submodule to use that and update it to latest commit which fixes a
dangling symlink and removes two big binaries that are not needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>