Commit Graph

693 Commits

Author SHA1 Message Date
Aurelien Jarno 777c98c32c target-s390x: basic PER event handling
This patch add basic support to generate PER exceptions. It adds two
fields to the cpu structure to record for the PER address and PER
code & ATMID values. When an exception is triggered and a PER event is
pending, the two PER values are copied to the lowcore area.

At the end of an instruction, an helper is checking for a possible
pending PER event and triggers an exception in that case. For that to
work with branches, we need to disable TB chaining when PER is
activated. Fortunately it's already in the TB flags.

Finally in case of a SERVICE CALL exception, we need to trigger the PER
exception immediately after.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:52 +02:00
Aurelien Jarno d453d10383 target-s390x: add get_per_in_range function
This function checks if an address is in between the PER starting
address and the PER ending address, taking care of a possible
address range loop.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:52 +02:00
Aurelien Jarno a8f931a931 target-s390x: add get_per_atmid function
This function returns the ATMID field that is stored in the
per_perc_atmid lowcore entry.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:51 +02:00
Aurelien Jarno fb01bf4c6b target-s390x: add PER related constants
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:51 +02:00
Aurelien Jarno 6da528d14d target-s390x: mvc_fast_memmove: access memory through softmmu
mvc_fast_memmove is bypassing the softmmu functions, getting the
physical source and destination addresses using the mmu_translate
function and accessing the corresponding physical memory. This
prevents watchpoints to work correctly.

Instead use the tlb_vaddr_to_host function to get the host addresses
corresponding to the guest source and destination addresses through the
softmmu code and fallback to the byte level code in case the
corresponding address are not in the QEMU TLB or being examined through
a watchpoint. As a bonus it works even for area crossing pages by
splitting the are into chunks contained in a single page, bringing some
performances improvements. We can therefore remove the 8-byte
loads/stores method, as it is now quite unlikely to be used.

At the same time change the name of the function to fast_memmove as it's
not specific to mvc and use the same argument order as the C memmove
function.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:51 +02:00
Aurelien Jarno fc89efe693 target-s390x: mvc_fast_memset: access memory through softmmu
mvc_fast_memset is bypassing the softmmu functions, getting the
physical address using the mmu_translate function and accessing the
corresponding physical memory. This prevents watchpoints to work
correctly.

Instead use the tlb_vaddr_to_host function to get the host address
corresponding to the guest address through the softmmu code and fallback
to the byte level code in case the corresponding address is not in the
QEMU TLB or being examined through a watchpoint. As a bonus it works
even for area crossing pages by splitting the are into chunks contained
in a single page, bringing some performances improvements.

At the same time change the name of the function to fast_memset as it's
not specific to mvc and use the same argument order as the C memset
function.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:51 +02:00
Aurelien Jarno d7ce6b7a0b target-s390x: function to adjust the length wrt page boundary
This patch adds a function to adjust the length of a transfer so that
it doesn't cross a page boundary in softmmu mode. It does nothing in
user mode.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:51 +02:00
Alexander Graf ad8a4570ad target-s390x: wire up I/O instructions in TCG mode
The code handling the I/O instructions for KVM decodes the instruction
itself. In TCG mode also pass the full instruction word to the helpers.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno 2ecacb0b4b target-s390x: wire up DIAG REIPL in TCG mode
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno 8df7eef305 target-s390x: wire up DIAG IPL in TCG mode
DIAG IPL is already implemented for KVM, but not wired from TCG. For
that change the format of the instruction so that we can get R1 and R3
numbers in addition to the function code.

The diag function can change plenty of things, including CC, so we
should enter with a static CC. Also it doesn't set the value of general
register 2 to 0 as in the current code. We also need to exit the CPU
loop after a reset, which means a new PSW.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno cbed0ba78f target-s390x: fix s390_cpu_initial_reset
The s390_cpu_initial_reset function zeroes a big part of the CPU state
structure, including CPU_COMMON, and thus the QEMU TLB structure. As
they should not be initialized with zeroes only, we need to call the
tlb_flush to initialize it correctly.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno cc0d079d45 target-s390x: initialize I/O interrupt queue
env->io_index[] should be set to -1 during CPU reset to mark the
I/O interrupt queue as empty.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno 7107e5a756 target-s390x: correctly initialize ext interrupt queue
env->ext_index should be initialized to -1 to mark the external
interrupt queue as emtpy. This should not be done in s390_cpu_initfn
as all the interrupt fields are later reset to 0 by the memset in
s390_cpu_initial_reset or s390_cpu_full_reset. Move the initialization
there.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno 06e3c077da target-s390x: fix setcc in TCG mode
In TCG mode we should store the CC value in env->cc_op. However do it
inconditionnaly because:
- the tcg_enabled function is not inlined
- it's probably faster to always store the value, especially given it
  is likely in the same cache line than env->psw.mask.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno a499973ff3 virtio-ccw: disable ioevent bit when ioeventfds are not enabled
This remove the corresponding error messages in TCG mode, and allow to
simplify the s390_assign_subch_ioeventfd() function.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Alexander Graf d49f4ab48e s390/ioinst: fix endianness in ioinst_schib_valid
The ioinst_schib_valid gets a SCHIB in guest endianness, we should
byteswap the fields we access.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Aurelien Jarno ae52e585bf s390/ioinst: fix IO_INT_WORD_ISC macro
The I/O-Interruption Subclass field corresponds to bits 2 to 5 (BE
notation) of the Interruption-Identification Word. The value should
be shift by 27 instead of 24.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17 12:40:50 +02:00
Peter Maydell 46bca5404b s390x/kvm/watchdog
1. Implement a diag288 based watchdog
 2. Fix virtio-ccw BIOS for gcc >= 4.9
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVfri5AAoJEBF7vIC1phx8ME4P/AgMYstY5sjzmSYKAXLhwmZl
 vDaxZ1MqoRZQfzPWXcPGavNFb9lnebLkedWO4FvYWWoVRxUHThKF2d5PDz8qsS7C
 lNhp0YNiMHcvSv8mlAr9TVP3ssKbp0YFyhZAIEtjlAesnbHl0URfPUulx0TpKHsg
 EqEiwFPB+eUHD1GiBa+x7bTCnyp8Ppn9SrGItJR0Mq7AjLzvjtwATPZbLk+I6mwN
 Nqd0uhYScbi6NX4UlifzaYYePjAQmN2ZhLwzuasqHhhJtAm8M6EPXkwxb9X5elWJ
 cZmCEkYMD+j5G6Lqm3ZV44g1fSM9k4ZctcOUpQzPmS+sDj48ydDDkgy/hiY/Fu6e
 Xf3Ti6ChSQMjQc9vcYWHtdAt+rvYAxOqTK//hHp87MADsREYjhVXVBMubJZ5h+z0
 eEtuKo6npZg1AD8lFdCMEyvqWHqldVYiZfJwTBoCbX26bEpkbQhy11PjD7Sm3lP0
 EVad06C1Rv4Gr6uiL+4Pqulm6G8CqATiLMUrE9VkI7WhtwOa81OQS6v+dlVIERLF
 ueKt7bhCBIQrmdsAsNlC5nvP39pCkkBjogdw+S7UttTFA9KEKr8gMjHVAdNNk/Or
 OBi1YBJOCc2CcE/0mVpC8okgprOP3AOjPGn+wmlRNw2s3TOlmVN/rz/d6lr/rPFV
 VIpdMY0RuQSQY36qUdEo
 =WVga
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150615' into staging

s390x/kvm/watchdog

1. Implement a diag288 based watchdog
2. Fix virtio-ccw BIOS for gcc >= 4.9

# gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150615:
  s390/bios: build with -fdelete-null-pointer-checks
  watchdog: Add new Virtual Watchdog action INJECT-NMI
  nmi: Implement inject_nmi() for non-monitor context use
  s390x/watchdog: diag288 migration support
  s390x/kvm: diag288 instruction interception and handling
  s390x/watchdog: introduce diag288 watchdog device
  watchdog: change option wording to allow for more watchdogs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 13:24:51 +01:00
Juan Quintela 5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Xu Wang 8fc639af4b s390x/kvm: diag288 instruction interception and handling
Intercept the diag288 requests from kvm guests, and hand the
requested command to the diag288 watchdog device for further
handling.

Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-11 17:45:49 +02:00
Peter Maydell 44ee94e486 s390x/virtio-ccw: migration and virtio for 2.4
1. Migration fixups
 2. virtio 9pfs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVdp0FAAoJEBF7vIC1phx8oZcP/RVDTZ8OOz+OkSqDQITTezmM
 yziWEjoWqFsGWBuwZp8eztQKdF/Jpx+YgE3XnFFFFFiH+HvsBhG8dJIHjKEPqP5W
 vdd2ZgO0VeXH8v5PW8TbZG6jUBjoNWjNGeFwxIunqbyViUXI98rwEIHj0ntXkPRR
 KhPuiPTpE4/cZOdGmC3qLC3m1nFVTTfnaXiVJGedcATkjJeDs5VbgstZd6YgXRkG
 HfUDJzkvD8FpdYW9/XBChfKPPWYvFa1wabGdrC/FJYmrcPuJUDWHpERsyAM8vF7F
 daAuYG2iF6EGv7H+XKJb4ZLnSkfHA3OCeGeMYApo/DIyWb3w6jwU0xjv2PVatSPa
 KMWOFq8um5pM9fV1+TQIbh2sFSq6aHcpG6r/vdt6cpbO2c9O3Xt/W8DgTNFMyBaC
 NUTs+8mKp165EzwbLZvAztcBE+2frHlXas+jFwLJm2S70pZTAw3uv4MbyLAePzd1
 2cn2zmDGxpmgwCrjSZA8mNq/DPVXtc1/ACFv6ymYItz5Cnrls+SRdOmbwwZZRyXo
 SNmUyQxQCm+C8J52pVMC7hGZYiegSJjZRJYsR9zpUKzB/Y8ghoFTDPSTw8llWtLD
 wxiAOxPTo8gql1IpCdpPSLQqyxOvgKIhxU5yRs1H2b3xov65amc3CyYAS+DdJQ2g
 XHTKOR31driw82O6glu9
 =s6YP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150609' into staging

s390x/virtio-ccw: migration and virtio for 2.4

1. Migration fixups
2. virtio 9pfs

# gpg: Signature made Tue Jun  9 09:00:05 2015 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150609:
  s390x/migration: add comment about floating point migration
  s390x/kvm: always ignore empty vcpu interrupt state
  virtio-ccw/migration: Migrate config vector for virtio devices
  virtio-ccw: add support for 9pfs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-09 11:07:41 +01:00
Christian Borntraeger 6028ef0757 s390x/migration: add comment about floating point migration
commit 46c804def4 ("s390x: move fpu regs into a subsection
of the vmstate") moved the fprs into a subsection and bumped
the version number. This will allow to not transfer fprs in
the future if necessary. Add a comment to mark the return true
as intentional.

CC: Juan Quintela <quintela@redhat.com>
CC: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1433758884-2997-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-06-09 09:54:57 +02:00
Alexander Graf 9814fed0af target-s390x: Only access allocated storage keys
We allocate ram_size / PAGE_SIZE storage keys, so we need to make sure that
we only access that many. Unfortunately the code can overrun this array by
one, potentially overwriting unrelated memory.

Fix it by limiting storage keys to their scope.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-05 01:38:00 +02:00
Aurelien Jarno 068593deea target-s390x: fix MVC instruction when areas overlap
The MVC instruction and the memmove C funtion do not have the same
semantic when memory areas overlap:

MVC: When the operands overlap, the result is obtained as if the
operands were processed one byte at a time and each result byte were
stored immediately after fetching the necessary operand byte.

memmove: Copying takes place as though the bytes in src are first copied
into a temporary array that does not overlap src or dest, and the bytes
are then copied from the temporary array to dest.

The behaviour is therefore the same when the destination is at a lower
address than the source, but not in the other case. This is actually a
trick for propagating a value to an area. While the current code detects
that and call memset in that case, it only does for 1-byte value. This
trick can and is used for propagating two or more bytes to an area.

In the softmmu case, the call to mvc_fast_memmove is correct as the
above tests verify that source and destination are each within a page,
and both in a different page. The part doing the move 8 bytes by 8 bytes
is wrong and we need to check that if the source and destination
overlap, they do with a distance of minimum 8 bytes before copying 8
bytes at a time.

In the user code, we should check check that the destination is at a
lower address than source or than the end of the source is at a lower
address than the destination before calling memmove. In the opposite
case we fallback to the same code as the softmmu one. Note that l
represents (length - 1).

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno a3084e8055 target-s390x: use softmmu functions for mvcp/mvcs
mvcp and mvcs helper get access to the physical memory by a call to
mmu_translate for the virtual to real conversion and then using ldb_phys
and stb_phys to physically access the data. In practice this is quite
slow because it bypasses the QEMU softmmu TLB and because stb_phys calls
try to invalidate the corresponding memory for each access.

Instead use cpu_ldb_{primary,secondary} for the loads and
cpu_stb_{primary,secondary} for the stores. Ideally this should be
further optimized by a call to memcpy, but that already improves the
boot time of a guest by a factor 1.8.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno c255ac6012 target-s390x: support non current ASC in s390_cpu_handle_mmu_fault
s390_cpu_handle_mmu_fault currently looks at the current ASC mode
defined in PSW mask instead of the MMU index. This prevent emulating
easily instructions using a specific ASC mode. Fix that by using the
MMU index converted back to ASC using the just added cpu_mmu_idx_to_asc
function.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 4decd76d71 target-s390x: add a cpu_mmu_idx_to_asc function
Use constants to define the MMU indexes, and add a function to do
the reverse conversion of cpu_mmu_index.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno a1f12d855b target-s390x: implement high-word facility
Besides RISBHG and RISBLG, all high-word instructions are not
implemented. Fix that.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 782a847952 target-s390x: implement load-and-trap facility
At the same time move the trap code from op_ct into gen_trap and use it
for all new functions. The value needs to be stored back to register
before the exception, but also before the brcond (as we don't use
temp locals). That's why we can't use wout helper.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 375ee58bed target-s390x: implement miscellaneous-instruction-extensions facility
RISBGN is the same as RISBG, but without setting the condition code.
CLT and CLGT are the same as CLRT and CLGRT, but using memory for the
second operand.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno df46283ce7 target-s390x: implement LPDFR and LNDFR instructions
This complete the floating point support sign handling facility.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 3f4de6756c target-s390x: implement TRANSLATE EXTENDED instruction
It is part of the basic zArchitecture instructions.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 54f0077509 target-s390x: implement TRANSLATE AND TEST instruction
It is part of the basic zArchitecture instructions. Allow it to be call
from EXECUTE.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno ed0bcecec1 target-s390x: implement LOAD FP INTEGER instructions
This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno 9182886d79 target-s390x: move SET DFP ROUNDING MODE to the correct facility
It belongs to the DFP rounding facility.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno f7c2114067 target-s390x: move STORE CLOCK FAST to the correct facility
STORE CLOCK FAST should be in the SCF facility.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 74266b4a58 target-s390x: change CHRL and CGHRL format to RIL-b
Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 1dedb9b76f target-s390x: fix CLGIT instruction
The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 111d7f4a69 target-s390x: fix exception for invalid operation code
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.

This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno a1c7610a68 target-s390x: implement LAY and LAEY instructions
This complete the general-instructions-extension facility, enable it.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 92892330e7 target-s390x: move a few instructions to the correct facility
LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 4a33565f9f target-s390x: detect tininess before rounding for FP operations
The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno f821135cdd target-s390x: silence NaNs for LOAD LENGTHENED and LOAD ROUNDED
LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 1f65958d9c target-s390x: fix MMU index computation
The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.

This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).

At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno 9bebf9863b target-s390x: fix PSW value on dynamical exception from helpers
runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno aa752a4afc target-s390x: fix LOAD MULTIPLE instruction on page boundary
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.

This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.

Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.

This fixes random segmentation faults seen in the guest.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno b8ae94bd39 target-s390x: implement STPT helper
Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.

This allow the Linux kernel to correctly do time accounting.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno aa9e14e684 target-s390x: implement STCKC helper
The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno d9d55f1108 target-s390x: streamline STCK helper
Now that clock_value is only used in one place, we can inline it in
the STCK helper.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno c941f07485 target-s390x: simplify SCKC helper
The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno 9cb32c442e target-s390x: add a tod2time function
Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno a91a1b20a2 target-s390x: remove unused helpers
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno d30107814c target-s390x: optimize (negative-) abs computation
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno 2aaa194068 target-s390x: fix CC computation for LOAD POSITIVE instructions
LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
  0: Result zero; no overflow
  1: --
  2: Result greater than zero; no overflow
  3: Overflow

The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno ee0d0be168 target-s390x: fix CC computation for EX instruction
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).

This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Sascha Silbe b853d4cbf2 s390x/kvm: always ignore empty vcpu interrupt state
kvm_s390_vcpu_interrupt_pre_save() and
kvm_s390_vcpu_interrupt_post_load() are essentially no-ops on hosts
without KVM_CAP_S390_IRQ_STATE. Move the capability check after the
check for saved IRQ state in kvm_s390_vcpu_interrupt_post_load() so that
migration between hosts without KVM_CAP_S390_IRQ_STATE (including save /
restore on the same host) continues to work.

Fixes: 3cda44f7ba ("s390x/kvm: migrate vcpu interrupt state")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-03 18:07:09 +02:00
Eric Auger 1850b6b7d0 kvm: introduce kvm_arch_msi_data_to_gsi
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Eric Farman 46ca6b3bc9 s390x: Enable vector processing capability
Everything is finally in place, inform the kernel that user space
supports vector registers.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:04 +02:00
Eric Farman b2ac0ff5d9 s390x: Migrate vector registers
When migrating a guest, be sure to include the vector registers.
The vector registers are defined in a subsection, similar to the
existing subsection for floating point registers.  Since the
floating point registers are always present (and thus migrated),
we can skip them when performing the migration of the vector
registers which may or may not be present.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman 3ceeb2930f s390x: Add vector registers to ELF dump
Create ELF notes for the vector registers where applicable, so that
their contents can be examined by utilities such as crash or readelf.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman 56c4227149 s390x: Add vector registers to HMP output
There are mechanisms to dump registers via the qemu HMP interface,
such as the "info registers" command.  Expand this output to dump
the new vector registers.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman ca343c7a84 s390x: gdb updates for vector registers
gdb allows registers to be displayed/modified, and is being updated
to account for the new vector registers.  Mirror these changes in
the gdb stub in qemu so that this can be performed when gdb is
attached to the qemu gdbserver.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman abec53565d s390x: Store Additional Status SIGP order
Add handling for the Store Additional Status at Address order
that exists for the Signal Processor (SIGP) instruction.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman fcb79802e0 s390x: Vector Register IOCTLs
Handle the actual syncing of the vector registers with kernel space,
via the get/put register IOCTLs.

The vector registers that were introduced with the z13 overlay
the existing floating point registers.  FP registers 0-15 are
the high-halves of vector registers 0-15.  Thus, remove the
freg fields and replace them with the equivalent vector field
to avoid errors in duplication.  Moreover, synchronize either the
vector registers via kvm_sync_regs, or floating point registers
via the GET/SET FPU IOCTLs.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Eric Farman c498d8e36e s390x: Common access to floating point registers
Provide a routine to access the correct floating point register,
to simplify future expansion.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27 17:52:03 +02:00
Alexander Graf 57af7289f2 s390x: Add interlocked access facility 1 instructions
We're currently missing all instructions defined by the "interlocked-access
facility 1" which is part of zEC12. This patch implements all of them except
for LPD and LPDG.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-05-13 14:48:54 +02:00
Alexander Graf 13f67dd582 s390x: Add some documentation in opcode list
I find it really hard to grasp what each field in the opcode list means.
Slowly walking through its semantics myself, I figured I'd write a small
summary at the top of the file to make life easier for me and whoever
looks at the file next.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-05-13 14:48:54 +02:00
Alexander Graf c095ed731c s390x: Fix stoc direction
The store conditional instruction wants to store when the condition
is fulfilled, so we should branch out when it's not true.

The code today branches out when the condition is true, clearly
reversing the logic. Fix it up by negating the condition.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-05-13 14:48:54 +02:00
Peter Maydell b951cda21d - build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
 - KVM support for memory transaction attributes
 - one more small step towards unlocked MMIO dispatch
 - one piece of the qemu-nbd errno fixes
 - trivial-ish patches from Denis and Thomas
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
 OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
 GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
 j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
 JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
 LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
 =Z/UD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas

# gpg: Signature made Fri May  8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  qemu-nbd: only send a limited number of errno codes on the wire
  rules.mak: Force CFLAGS for all objects in DSO
  configure: require __thread support
  exec: move rcu_read_lock/unlock to address_space_translate callers
  kvm: add support for memory transaction attributes
  mtree: also print disabled regions
  mtree: tag & indent a bit better
  apic_common: improve readability of apic_reset_common
  kvm: Silence warning from valgrind

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-11 12:01:09 +01:00
Jens Freimann 3cda44f7ba s390x/kvm: migrate vcpu interrupt state
This patch adds support to migrate vcpu interrupts.
We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE
to get/set the complete interrupt state for a vcpu.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08 10:36:19 +02:00
David Hildenbrand 46c804def4 s390x: move fpu regs into a subsection of the vmstate
Let's move the floating point registers into a seperate subsection and
bump up the version id. This cleans up the current vmstate and will
allow for a future extension with vector registers in a compatible way.

This patch is based on a patch from Eric Farman.

Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08 10:36:19 +02:00
Jens Freimann 1191c94963 s390x/kvm: use ioctl KVM_S390_IRQ for vcpu interrupts
KVM_S390_INT uses only two parameter fields. This is not
enough to pass all required information for certain interrupts.

A new ioctl KVM_S390_IRQ is available which allows us to
inject all local interrupts as defined in the Principles of
Operation. It takes a struct kvm_s390_irq as a parameter
which can store interrupt payload data for all interrupts.

Let's use the new ioctl for injecting vcpu interrupts.

Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08 10:36:19 +02:00
Paolo Bonzini 4c66375252 kvm: add support for memory transaction attributes
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30 16:55:32 +02:00
Peter Maydell f90f5b9a9a trivial patches for 2015-04-30
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVQikmAAoJEL7lnXSkw9fb4XUH/25cUpHNks1UUdwMBLAO/Et+
 KK9JE6c2o7HLsn6okPbNhWTbszRpFHC4cGFIozoYoSr780EjLgO/M73kzmSyGHqB
 jUgyLO0CgHFN1bBRpXj/E6hgmWrB1U6wTQsRFSzNDQ8f3xl/WqQAGnNg2jVtNIA5
 AWm4LWzorQldKEFenCRoINW7YqJfR5/x7ijTG6TYLmru67BJhpOrt4SuEa5dPVVy
 Tzl4Bc8P85hlRcB6N2aoyCLqtH2NSGXfilrAmNrzbzxV1fNze0gMkWG+eL69Ci44
 2RldU7O9oc55AuJyFhuLvsSygIie3f5c7XlX6t8Cnu3EpOZEDlX9gHBJ9wYDkAw=
 =vysd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-04-30' into staging

trivial patches for 2015-04-30

# gpg: Signature made Thu Apr 30 14:07:50 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-04-30: (42 commits)
  openrisc: cpu: Remove unused cpu_get_pc
  microblaze: fix memory leak
  tcg: Delete unused cpu_pc_from_tb()
  kvm: Silence warning from valgrind
  vhost-user: remove superfluous '\n' around error_report()
  target-mips: fix memory leak
  qmp-commands: Fix typo
  linux-user/elfload: use QTAILQ_FOREACH instead of open-coding it
  coroutine: remove unnecessary parentheses in qemu_co_queue_empty
  qemu-char: remove unused list node from FDCharDriver
  input: remove unused mouse_handlers list
  cpus: use first_cpu macro instead of QTAILQ_FIRST(&cpus)
  microblaze: cpu: delete unused cpu_interrupts_enabled
  microblaze: cpu: Renumber EXCP_* constants to close gap
  microblaze: cpu: Delete EXCP_NMI
  microblaze: cpu: Remove unused CC_OP enum
  microblaze: cpu: Remote unused cpu_get_pc
  microblaze: mmu: Delete flip_um fn prototype
  defconfigs: Piggyback microblazeel on microblaze
  libcacard: do not use full paths for include files in the same dir
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-30 15:18:30 +01:00
Stefan Weil 631b22ea20 misc: Fix new collection of typos
All of them were reported by codespell.
Most typos are in comments, one is in an error message.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:48 +03:00
Alexander Yarygin 6cb1e49de5 s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctl
Access register mode is one of the modes that control dynamic address
translation. In this mode the address space is specified by values of
the access registers. The effective address-space-control element is
obtained from the result of the access register translation. See
the "Access-Register Introduction" section of the chapter 5 "Program
Execution" in "Principles of Operations" for more details.

When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must
know which access register number to use for address translation.
This patch does several things:
- add new parameter 'uint8_t ar' to that function
- decode ar number from intercepted instructions
- pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it
to the KVM_S390_MEM_OP ioctl.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Thomas Huth a9bcd1b871 s390x/mmu: Use ioctl for reading and writing from/to guest memory
Add code to make use of the new ioctl for reading from / writing to
virtual guest memory. By using the ioctl, the memory accesses are now
protected with the so-called ipte-lock in the kernel.

[CH: moved error message into kvm_s390_mem_op()]
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Ekaterina Tumanova f07177a559 s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIB
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows
userspace to intercept execution, and fill in the values, that are
known to qemu: machine name (8 chars), extended machine name (256
chars), extended machine name encoding (equals 2 for UTF-8) and UUID.

STSI322 qemu handler also finds a highest virtualization level in
level-3 virtualization stack that doesn't support Extended Names
(Ext Name delimiter) and propagates zero Ext Name to all levels below,
because this level is not capable of managing Extended Names of lower
levels.

Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Thomas Huth 217a4acb21 s390x/mmu: Use access type definitions instead of magic values
Since there are now proper definitions for the MMU access type,
let's use them in the s390x MMU code, too, instead of the
hard-to-understand magic values.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30 13:21:42 +02:00
Peter Maydell 2dfe7d07e2 Final batch of s390x enhancements/fixes for 2.3:
- handle TOD clock during migration
 - CPACF key wrap options
 - limit amount of pci device code we build
 - ensure big endian accesses for ccws
 - various fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJVBqoIAAoJEN7Pa5PG8C+v1XQP/2eZN3Ok9XjpHS/+tGSKcS7k
 1UIFffWRoez5bcBez6EMaenOeI6PbBGX/6V+MRmdDCjijcvxcTYeXjbhOOLAmEaN
 ByKLEOVKkuYTKn3jdffWa9wU9f0tyAqeRs2wJPGFUtYEQ/mxR+A4zJAXFJPzr+ZU
 RoghwK7ii7CACsarVKShQSVvfj33Ick3f1t3bB031Rq4yBdPP+fubKBp4DyYgPui
 fU5NpkPDcblBfXTnwqOeCgxCR6JF9KuEvLsiGgb62zZrXcu/1kluROEUkgBSxdBs
 DLui2plFbx7RYxzJIH+wOl3ENwhbuPg54hXSd1JVFDBA4kiDepTjRzo3fcLzBHZZ
 PLf6Awf7xCmJluwHwlv9rkkNCJiGKabiI2vmQ+G8uIXMR23VGjuNKcOy2ugPX0RJ
 /dyn9to44TWpyc9uVmMTQh7qTx4wJbw8FjqJOlMObeswUwwjAWYVKa+Kwk/bur0H
 FFCHrqgrmPobI0x0xgYznKojJkZ/cHr7FkJTGrYxk05vu7wPV2mkBXxN9uVq9F0e
 byTk3/IrBtDdj1UlLHJLGfRrleLMFkRb74FqvFYAOZlg8K5z0hXIoZiV10V6QEVU
 dFD//CFPCO3KxeB8Mcak6osO2thEScNZurq3x5QrebeMUW7gwAwDYvzT8OPdmqR9
 yLmGZ8KJ8pE5OVzW23Yq
 =wS11
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150316' into staging

Final batch of s390x enhancements/fixes for 2.3:
- handle TOD clock during migration
- CPACF key wrap options
- limit amount of pci device code we build
- ensure big endian accesses for ccws
- various fixes and cleanups

# gpg: Signature made Mon Mar 16 10:01:44 2015 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20150316:
  s390x/config: Do not include full pci.mak
  s390x/pci: fix length in sei_nt2 event
  s390x/ipl: remove dead code
  s390x/virtio-bus: Remove unused function s390_virtio_bus_console()
  s390x: CPACF: Handle key wrap machine options
  s390x/kvm: make use of generic vm attribute check
  kvm: encapsulate HAS_DEVICE for vm attrs
  virtio-ccw: assure BE accesses
  s390x/kvm: Guest Migration TOD clock synchronization
  s390x: Replace unchecked qdev_init() by qdev_init_nofail()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16 11:44:55 +00:00
Tony Krowiak 2eb1cd0768 s390x: CPACF: Handle key wrap machine options
Check for the aes_key_wrap and dea_key_wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.

This patch introduces two new machine options for indicating the state of
AES/DEA key wrapping functions.  This controls whether the guest will
have access to the AES/DEA crypto functions.

aes_key_wrap="on | off" is changed to aes-key-wrap="on | off"
dea_key_wrap="on | off" is changed to dea-key-wrap="on | off"

Check for the aes-key-wrap and dea-key-wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:20:11 +01:00
Dominik Dingel 2b147555f7 s390x/kvm: make use of generic vm attribute check
By using the new introduced generic interface we
can remove redundancies and clean up.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:15:45 +01:00
Jason J. Herne 3f9e59bb53 s390x/kvm: Guest Migration TOD clock synchronization
Synchronizes the guest TOD clock across a migration by sending the guest TOD
clock value to the destination system. If the guest TOD clock is not preserved
across a migration then the guest's view of time will snap backwards if the
destination host clock is behind the source host clock. This will cause the
guest to hang immediately upon resuming on the destination system.

Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>

Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:15:44 +01:00
Richard Henderson 42a268c241 tcg: Change translator-side labels to a pointer
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.

Note that the code generating backends still manipulate labels as int.

With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13 12:28:18 -07:00
Peter Maydell a195fdd028 misc fixes and cleanups
A bunch of fixes all over the place, some of the
 bugs fixed are actually regressions.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
 pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
 xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
 oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
 JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
 V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
 =RUld
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

misc fixes and cleanups

A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (25 commits)
  virtio-scsi: remove empty wrapper for cmd
  virtio-scsi: clean out duplicate cdb field
  virtio-scsi: fix cdb/sense size
  uapi/virtio_scsi: allow overriding CDB/SENSE size
  virtio-scsi: drop duplicate CDB/SENSE SIZE
  exec: don't include hw/boards for linux-user
  acpi: specify format for build_append_namestring
  MAINTAINERS: drop aliguori@amazon.com
  tpm: Move memory subregion function into realize function
  virtio-pci: Convert to realize()
  pci: Convert pci_nic_init() to Error to avoid qdev_init()
  machine: query mem-merge machine property
  machine: query dump-guest-core machine property
  hw/boards: make it safe to include for linux-user
  machine: query phandle-start machine property
  machine: query kvm-shadow-mem machine property
  kvm: add machine state to kvm_arch_init
  machine: query kernel-irqchip property
  machine: allowed/required kernel-irqchip support
  machine: replace qemu opts with iommu property
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-12 09:13:07 +00:00
Marcel Apfelbaum b16565b396 kvm: add machine state to kvm_arch_init
Needed to query machine's properties.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11 18:16:17 +01:00
Peter Maydell 165fa4091e s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
 - make the ccw bios relocatable. This allows for bigger ramdisks
   or smaller guests
 - Handle all slow SIGPs in QEMU (instead of kernel) for better
   compliance and correctness
 - tell the KVM module the maximum guest size. This allows KVM
   to reduce the number or page table levels
 - Several fixes/cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVABYpAAoJEBF7vIC1phx8M/kP/AsuFTCrWebziX5qdeIFX8Cu
 RBcnqm7Dgt7lg+fyt/mj7g7/PVZEoe9AQ5hWoXmguR850/PmMuEDfHhY6pAfKU+r
 RokYiQR2pHDWFU9D2qf3ggEcI4suym1mmuMjx4TEs9318zpREHu9fGpzfJxlQgXa
 SUqQDZWElYyiF1nu8cxvH7wqeJLalKSiQBRtkM3w2oG8Nw1TgFxt/xiYHkiz/rkr
 U2sQrCabOCcVC/nlDAaWajBq18rzqhFk6QZEZsf9O4jsxy8Pbmkw2cqSp68KBMeB
 o50lRrguGhuejQg6g4AXZWGgUt5YnNL0CIHmTXp0KTnijGSAHnWUPf+qCOOR/sfn
 1roTNwCH8rjSfpEPKAhmiLRcPTVzy6IYxaT+J7KniCRAyHdIk2NBF3cHzDBy47uC
 pre1pIHnKkwBkxv/xkj8CHlfcpCjp8sXhW6FSXoX9On5SKiROnQUwiLoUjtnvRXe
 kQZRhtgJSKnLTtEEZ3XWh/UDyD2QJiwnm1E5SjXEa/mdDqgUmsVsPtz29f/xDKJA
 GZGNOCsIew0286C+tf5M88JpIXqpAiEYXA9vw5ZUqzxh3ArNuT0GJGxrlWxbqD8j
 tbvjHIja62IbCxM8dtZ9v0M4YFNU+VLHdKEREziK6RKS9Ek7rJmSh8128JNQhJ/X
 RjiUxdcbApvEunZInwB/
 =6Cw+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging

s390x/kvm: Features and fixes for 2.3

- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
  or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
  compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
  to reduce the number or page table levels
- Several fixes/cleanups

# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150310:
  s390-ccw: rebuild BIOS
  s390/bios: Make the s390-ccw.img relocatable
  elf-loader: Provide the possibility to relocate s390 ELF files
  s390-ccw.img: Reinitialize guessing on reboot
  s390-ccw.img: Allow bigger ramdisk sizes or offsets
  s390x/kvm: passing max memory size to accelerator
  virtio-ccw: Convert to realize()
  virtio-s390: Convert to realize()
  virtio-s390: s390_virtio_device_init() can't fail, simplify
  s390x/kvm: enable the new SIGP handling in user space
  s390x/kvm: deliver SIGP RESTART directly if stopped
  s390x: add function to deliver restart irqs
  s390x/kvm: SIGP START is only applicable when STOPPED
  s390x/kvm: implement handling of new SIGP orders
  s390x/kvm: trace all SIGP orders
  s390x/kvm: helper to set the SIGP status in SigpInfo
  s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
  s390x/kvm: more details for SIGP handler with one destination vcpu
  s390x: introduce defines for SIGP condition codes
  synchronize Linux headers to 4.0-rc3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 15:11:58 +00:00
Eduardo Habkost 2994fd96d9 cpu: Make cpu_init() return QOM CPUState object
Instead of making cpu_init() return CPUArchState, return CPUState.

Changes were made using the Coccinelle semantic patch below.

  @@
  typedef CPUState;
  identifier e;
  expression args;
  type CPUArchState;
  @@
  -   e =
  +   cpu =
          cpu_init(args);
  -   if (!e) {
  +   if (!cpu) {
          ...
      }
  -   cpu = ENV_GET_CPU(env);
  +   e = cpu->env_ptr;

  @@
  identifier new_env, new_cpu, env, cpu;
  type CPUArchState;
  expression args;
  @@
  -{
  -   CPUState *cpu = ENV_GET_CPU(env);
  -   CPUArchState *new_env = cpu_init(args);
  -   CPUState *new_cpu = ENV_GET_CPU(new_env);
  +{
  +   CPUState *cpu = ENV_GET_CPU(env);
  +   CPUState *new_cpu = cpu_init(args);
  +   CPUArchState *new_env = new_cpu->env_ptr;
      ...
  }

  @@
  identifier c, cpu_init_func, cpu_model;
  type StateType, CPUType;
  @@
  -static inline StateType* cpu_init(const char *cpu_model)
  -{
  -   CPUType *c = cpu_init_func(cpu_model);
  (
  -   if (c == NULL) {
  -       return NULL;
  -   }
  -   return &c->env;
  |
  -   if (c) {
  -       return &c->env;
  -   }
  -   return NULL;
  )
  -}
  +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model))

  @@
  identifier cpu_init_func;
  identifier model;
  @@
  -#define cpu_init(model) (&cpu_init_func(model)->env)
  +#define cpu_init(model) CPU(cpu_init_func(model))

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
[AF: Fixed up cpu_copy() manually]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-10 17:33:51 +01:00
Dominik Dingel a310b283e3 s390x/kvm: passing max memory size to accelerator
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to
do some optimizations based on the guest memory limit.

The guest memory limit is computed by the initial definition and with the notion of
hotplugged memory.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand f16d3f5874 s390x/kvm: enable the new SIGP handling in user space
All required SIGP handlers have been implemented in QEMU.

Let's enable the new sigp handling in user space if the kernel supports it.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-11-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand e3b7b57807 s390x/kvm: deliver SIGP RESTART directly if stopped
According to the PoP, a restart irq has to be delivered "without first honoring
any other pending interruptions", if a cpu is in the STOPPED state.

While it is hard to implement this case in kvm, it can easily be handled in qemu.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-10-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand 3f10341ffb s390x: add function to deliver restart irqs
This patch adds a helper function to deliver restart irqs. To be able to be used
by kvm, the psw load/store methods have to perform special cc-code handling only
when running with tcg.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-9-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
David Hildenbrand 4f2b55d184 s390x/kvm: SIGP START is only applicable when STOPPED
In preparation for other CPU states, SIGP START will only start a VCPU if it is
in the STOPPED state.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-8-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 18ff949474 s390x/kvm: implement handling of new SIGP orders
This patch adds handling code for the following SIGP orders:
- SIGP SET ARCHITECTURE
- SIGP SET PREFIX
- SIGP STOP
- SIGP STOP AND STORE STATUS
- SIGP STORE STATUS AT ADDRESS

SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever
(and may only be interrupted by resets), so special care has to be taken about
them. Their status also has to be tracked within QEMU. This patch takes
care of migrating this status (e.g. if migration happens during a SIGP STOP).

Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a
time. According to the PoP, BUSY should be returned if another SIGP order is
currently being executed on a VCPU. This can only be implemented when the BQL
does not protect all handlers. For now, all SIGP orders on all VCPUs will be
serialized, which will be okay for the first shot.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 56dba22b7d s390x/kvm: trace all SIGP orders
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 36b5c84556 s390x/kvm: helper to set the SIGP status in SigpInfo
Whenever we set the SIGP status in the status register, we have to wipe out
the lower 4 bytes and keep the higher 4 bytes. Also the condition code will
always be set to STATUS_STORED.

Let's introduce the wrapper for SigpInfo, as this will avoid most duplicate
code in the future.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-5-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 22740e3fc0 s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
The parameter of the SIGP instruction will be neded in the future. Let's read it
out and store it in the struct sigp_info, so it can be passed to the sigp
handlers.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 6eb8f212d2 s390x/kvm: more details for SIGP handler with one destination vcpu
Whenever a sigp order is to be executed by a target vcpu, we use run_on_cpu().
As we have only one pointer to pass all data to these sigp handlers, let's
introduce the struct sigp_info and use it as a transport container.

All orders targeting a single vcpu are now  dispatched from a separate
handler. The destination vcpu is only valid for these orders and must not be
checked for SIGP SET ARCHITECTURE.

The sigp_info is filled with life in this new handler and used to pass the
information about the sigp order to the existing handlers. The cc is set
within these handlers.

Rename sigp_cpu_start() and sigp_cpu_restart() on the way to match the SIGP
order names (in order to avoid touching affected lines several times).

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
David Hildenbrand 5172b780c5 s390x: introduce defines for SIGP condition codes
This patch introduces defines for the SIGP condition codes and replaces all
occurrences of numeral condition codes with the new defines.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:22 +01:00
Gonglei 81b07353c5 Remove superfluous '\n' around error_report()
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:33 +03:00