Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmFxhbgdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/Z6gf/Wt/iI+cwM8+eNYgV
fFrvkN2YUBS4B7QBVs7axbUmHs+/B8PIyBjo9WLmkMTdgnj13JiXmvE879PZwryr
zlh/2KqKBq+87L5CMOfPXtePizlZI/TuxJL0koIMW/L85ABEYOMyaDp0bDqhJHHb
UNBxvlxHgBmZUpBkmJKWoOKxQ9Jz8M5jpoUjKFCxhMHqbzAQOjS0B0IR6E4n8R4o
pKiWStc2TB7aGtVRY/Jm4EaSy9n3g77K40Yxkn6txN8Eqm/QxCLq9uwEZM2YMR5h
IJUxdUVNT31mCd2EhSAlHqpCrKuFaGCb+t8fQxLkd73AT5Unm5jJl5alfsO8khgV
TgipUA==
=boXv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into staging
Introduce cpu topology support
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
# gpg: Signature made Thu 21 Oct 2021 08:22:32 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211021:
tests/data/acpi/virt: Update the empty expected file for PPTT
hw/arm/virt-acpi-build: Generate PPTT table
tests/data/acpi/virt: Add an empty expected file for PPTT
hw/acpi/aml-build: Add PPTT table
hw/acpi/aml-build: Add Processor hierarchy node structure
hw/arm/virt: Add cpu-map to device tree
device_tree: Add qemu_fdt_add_path
hw/arm/virt: Only describe cpu topology since virt-6.2
bios-tables-test: Generate reference table for virt/DBG2
hw/arm/virt_acpi_build: Generate DBG2 table
tests/acpi: Add void table for virt/DBG2 bios-tables-test
hw/elf_ops.h: switch to ssize_t for elf loader return type
hw/arm/sbsa-ref: Fixed cpu type error message typo.
roms/edk2: Only initialize required submodules
roms/edk2: Only init brotli submodule to build BaseTools
hw/arm/virt: Don't create device-tree node for empty NUMA node
tests/acpi: Generate reference blob for IORT rev E.b
hw/arm/virt-acpi-build: IORT upgrade up to revision E.b
tests/acpi: Get prepared for IORT E.b revision upgrade
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the Processor Properties Topology Table (PPTT) used to
describe CPU topology information to ACPI guests.
Note, a DT-boot Linux guest with a non-flat CPU topology will
see socket and core IDs being sequential integers starting
from zero, which is different from ACPI-boot Linux guest,
e.g. with -smp 4,sockets=2,cores=2,threads=1
a DT boot produces:
cpu: 0 package_id: 0 core_id: 0
cpu: 1 package_id: 0 core_id: 1
cpu: 2 package_id: 1 core_id: 0
cpu: 3 package_id: 1 core_id: 1
an ACPI boot produces:
cpu: 0 package_id: 36 core_id: 0
cpu: 1 package_id: 36 core_id: 1
cpu: 2 package_id: 96 core_id: 2
cpu: 3 package_id: 96 core_id: 3
This is due to several reasons:
1) DT cpu nodes do not have an equivalent field to what the PPTT
ACPI Processor ID must be, i.e. something equal to the MADT CPU
UID or equal to the UID of an ACPI processor container. In both
ACPI cases those are platform dependant IDs assigned by the
vendor.
2) While QEMU is the vendor for a guest, if the topology specifies
SMT (> 1 thread), then, with ACPI, it is impossible to assign a
core-id the same value as a package-id, thus it is not possible
to have package-id=0 and core-id=0. This is because package and
core containers must be in the same ACPI namespace and therefore
must have unique UIDs.
3) ACPI processor containers are not mandatorily required for PPTT
tables to be used and, due to the limitations of which IDs are
selected described above in (2), they are not helpful for QEMU,
so we don't build them with this patch. In the absence of them,
Linux assigns its own unique IDs. The maintainers have chosen not
to use counters from zero, but rather ACPI table offsets, which
explains why the numbers are so much larger than with DT.
4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
match the logical CPU IDs, because these IDs must be equal to the
MADT CPU UID (as no processor containers are present), and QEMU
uses the logical CPU ID for these MADT IDs.
So in summary, with QEMU as the vendor for the guests, we simply
use sequential integers starting from zero for the non-leaf nodes
but with ID-valid flag unset, so that guest will ignore them and
use table offsets as unique container IDs. And we use logical CPU
IDs for the leaf nodes with the ID-valid flag set, which will be
consistent with MADT.
Currently the implementation of PPTT generation complies with ACPI
specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at:
https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On existing older machine types, without cpu topology described
in ACPI or DT, the guest will populate one by default. With the
topology described, it will read the information and set up its
topology as instructed, but that may not be the same as what was
getting used by default. It's possible that an user application
has a dependency on the default topology and if the default one
gets changed it will probably behave differently.
Based on above consideration we'd better only describe topology
information to the guest on 6.2 and later machine types.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211020142125.7516-2-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
and use them to set and test the ASSERTED bit of LSI sources.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211004212141.432954-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until now, int was used as the return type for all the ELF
loader related functions. The returned value is the sum of all loaded
program headers "MemSize" fields.
Because of the overflow check in elf_ops.h, trying to load an ELF bigger
than INT_MAX will fail. Switch to ssize_t to remove this limitation.
Signed-off-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211014194325.19917-1-lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new auxmode GPIO that is updated when port B bit 6 is changed indicating
whether the hardware is configured for A/UX mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements the control virtqueue support for vhost. This
requires virtio-net to figure out the datapath queue pairs and control
virtqueue via is_datapath and pass the number of those two types
of virtqueues to vhost_net_start()/vhost_net_stop().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a new field in the vhost_dev structure to record
the last virtqueue index for the virtio device. This will be useful
for the vhost backends with 1:N model to start or stop the device
after all the vhost_dev structures were started or stopped.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most of the time, "queues" really means queue pairs. So this patch
switch to use "queue_pairs" to avoid confusion.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost-vdpa uses one device multiqueue queue (pairs) model. So we need
to classify the one time request (e.g SET_OWNER) and make sure those
request were only called once per device.
This is used for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a random number generator (RNG) backend that communicates
with a vhost-user server to retrieve entropy. That way other VMM
that comply with the vhost user protocl can use the same vhost-user
daemon without having to write yet another RNG driver.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20211012205904.4106769-2-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop base_name and turn generic_name into
"virtio-iommu-pci". This is more in line with
other modern-only devices.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211013191755.767468-3-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check vdpa device range before updating memory regions so we don't add
any outside of it, and report the invalid change if any.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211014141236.923287-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Other functions in the VT82xx chips need to raise ISA interrupts. Keep
a reference to them in the device state and add via_isa_set_irq() to
allow setting their state.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <778c04dc2c8affac060b8edf9e8d7dab3c3e04eb.1634259980.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This reverts commit 1b36e4f5a5.
Despite a comment saying why cpu_common_props cannot be placed in
a file that is compiled once, it was moved anyway. Revert that.
Since then, Property is not defined in hw/core/cpu.h, so it is now
easier to declare a function to install the properties rather than
the Property array itself.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QDicts are both what QMP natively uses and what the keyval parser
produces. Going through QemuOpts isn't useful for either one, so switch
the main device creation function to QDicts. By sharing more code with
the -object/object-add code path, we can even reduce the code size a
bit.
This commit doesn't remove the detour through QemuOpts from any code
path yet, but it allows the following commits to do so.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-15-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of accessing the global QemuOptsList, which really belong to the
command line parser and shouldn't be accessed from devices, store a
pointer to the QemuOpts in a new VirtIONet field.
This is not the final state, but just an intermediate step to get rid of
QemuOpts in devices. It will later be replaced with an options QDict.
Before this patch, two "primary" devices could be hidden for the same
standby device, but only one of them would actually be enabled and the
other one would be kept hidden forever, so this doesn't make sense.
After this patch, configuring a second primary device is an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-13-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hide_device() is used for virtio-net failover, where the standby virtio
device delays creation of the primary device. It only makes sense to
have a single primary device for each standby device. Adding a second
one should result in an error instead of hiding it and never using it
afterwards.
Prepare for this by adding an Error parameter to the hide_device()
callback where virtio-net is informed about adding a primary device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-12-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DeviceState.id is a pointer to a string that is stored in the QemuOpts
object DeviceState.opts and freed together with it. We want to create
devices without going through QemuOpts in the future, so make this a
separately allocated string.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-9-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move qmp_query_sgx() and hmp_info_sgx() from target/i386/monitor.c
to hw/i386/sgx.c, removing the sgx_get_info() indirection and the
"hw/i386/sgx.h" header.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qmp_query_sgx_capabilities() from target/i386/monitor.c to
hw/i386/sgx.c, removing the sgx_get_capabilities() indirection.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211005052604.1674891-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This model implements enough behaviour to do basic functionality tests
such as device initialisation and read out of dummy sample values. The
sample value generation strategy is similar to the STM ADC already in
the tree.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[clg : support for multiple engines (AST2600) ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[pdel : refactored engine register struct fields to regs[] array field]
[pdel : added guest-error checking for upper-8 channel regs in AST2600]
[pdel : allow 16-bit reads of the channel data registers]
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211005052604.1674891-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The gpio array is declared as a dense array:
qemu_irq gpios[ASPEED_GPIO_NR_PINS];
(AST2500 has 228, AST2400 has 216, AST2600 has 208)
However, this array is used like a matrix of GPIO sets
(e.g. gpio[NR_SETS][NR_PINS_PER_SET] = gpio[8][32])
size_t offset = set * GPIOS_PER_SET + gpio;
qemu_set_irq(s->gpios[offset], !!(new & mask));
This can result in an out-of-bounds access to "s->gpios" because the
gpio sets do _not_ have the same length. Some of the groups (e.g.
GPIOAB) only have 4 pins. 228 != 8 * 32 == 256.
To fix this, I converted the gpio array from dense to sparse, to that
match both the hardware layout and this existing indexing code.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211008033501.934729-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce an AspeedI2CBus SysBusDevice model and attach the associated
memory region and IRQ to the newly instantiated objects.
Before this change, the I2C bus IRQs were all attached to the
SysBusDevice model of the I2C controller. Adapt the AST2600 SoC
realize routine to take into account this change.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The AST2400 SPI controller has a transitional HW interface and it
stores the address width currently in use in a different register than
all the other SMC controllers. It needs special handling when working
in 4B mode.
Make it clear through a class handler. This also removes another use
of the segments array.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This simplifies the reset handler and has the benefit to remove some
"bad" use of the segments array as an identifier of the controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AspeedSMCFlash is a small structure representing the AHB memory window
through which the contents of a flash device can be accessed with MMIOs.
Introduce an AspeedSMCFlash SysBusDevice model and attach the associated
memory region to the newly instantiated objects.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'cs' is a more appropriate name to index SPI flash devices.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AspeedSMCFlash::size is only used to compute the initial size of the
boot_rom region. Not very useful, so directly call memory_region_size()
instead.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to keep a reference of the flash qdev in the AspeedSMCFlash
state: the SPI bus takes ownership and will release its resources. Remove
AspeedSMCFlash::flash.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The characteristics of the Aspeed controllers are described in a
AspeedSMCController structure which is redundant with the
AspeedSMCClass. Move all attributes under the class and adapt the code
to use class attributes instead.
This is a large change but it is functionally equivalent.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The MacOS driver expects a 60.15Hz vertical blank interrupt to be generated by
the framebuffer which in turn schedules the mouse driver via the Vertical Retrace
Manager.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The monitor modes table is found by experimenting with the Monitors Control
Panel in MacOS and analysing the reads/writes. From this it can be found that
the mode is controlled by writes to the DAFB_MODE_CTRL1 and DAFB_MODE_CTRL2
registers.
Implement the first block of DAFB registers as a register array including the
existing sense register, the newly discovered control registers above, and also
the DAFB_MODE_VADDR1 and DAFB_MODE_VADDR2 registers which are used by NetBSD to
determine the current video mode.
These experiments also show that the offset of the start of video RAM and the
stride can change depending upon the monitor mode, so update macfb_draw_graphic()
and both the BI_MAC_VADDR and BI_MAC_VROW bootinfo for the q800 machine
accordingly.
Finally update macfb_common_realize() so that only the resolution and depth
supported by the display type can be specified on the command line, and add an
error hint showing the list of supported resolutions and depths if the user tries
to specify an invalid display mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the available resolutions and colour depths are determined by the attached
display type, add a qdev property to allow the display type to be specified.
The main resolutions of interest are high resolution 1152x870 with 8-bit colour
and SVGA resolution up to 800x600 with 24-bit colour so update the q800 machine
to allow high resolution mode if specified and otherwise fall back to SVGA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS toolbox ROM uses the monitor sense to detect the display type and then
offer a fixed set of resolutions and colour depths accordingly. Implement the
monitor sense using information found in Apple Technical Note HW26: "Macintosh
Quadra Built-In Video" along with some local experiments.
Since the default configuration is 640 x 480 with 8-bit colour then hardcode
the sense register to return MACFB_DISPLAY_VGA for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Embed SerialMM in MchpPfSoCMMUartState and QOM-initialize it
- Alias SERIAL_MM 'chardev' property on MCHP_PFSOC_UART
- Forward SerialMM sysbus IRQ in mchp_pfsoc_mmuart_realize()
- Add DeviceReset() method
- Add vmstate structure for migration
- Register device in 'input' category
- Keep mchp_pfsoc_mmuart_create() behavior
Note, serial_mm_init() calls qdev_set_legacy_instance_id().
This call is only needed for backwards-compatibility of incoming
migration data with old versions of QEMU which implemented migration
of devices with hand-rolled code. Since this device didn't previously
handle migration at all, then it doesn't need to set the legacy
instance ID.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-4-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our device have 2 different I/O regions:
- a 16550 UART mapped for 32-bit accesses
- 13 extra registers
Instead of mapping each region on the main bus, introduce
a container, map the 2 devices regions on the container,
and map the container on the main bus.
Before:
(qemu) info mtree
...
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-000000002010101f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-000000002010301f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-000000002010501f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-000000002010701f (prio 0, i/o): mchp.pfsoc.mmuart
After:
(qemu) info mtree
...
0000000020100000-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020102000-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020104000-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020106000-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20210925133407.1259392-3-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current MCHP_PFSOC_MMUART_REG_SIZE definition represent the
size occupied by all the registers. However all registers are
32-bit wide, and the MemoryRegionOps handlers are restricted to
32-bit:
static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
.read = mchp_pfsoc_mmuart_read,
.write = mchp_pfsoc_mmuart_write,
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
Avoid being triskaidekaphobic, simplify by using the number of
registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-2-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Despite the comment, the members were not kept at the end.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change caf108bc58 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
selects an IO address range for acpi based PCI hotplug for q35 arbitrarily. It
starts at address 0x0cc4 and ends at 0x0cdb. At the time when the patch was
written but the final version of the patch was not yet pushed upstream, this
address range was free and did not conflict with any other IO address ranges.
However, with the following change, this address range was no
longer conflict free as in this change, the IO address range
(value of ACPI_PCIHP_SIZE) was incremented by four bytes:
b32bd763a1 ("pci: introduce acpi-index property for PCI device")
This can be seen from the output of QMP command 'info mtree' :
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc4-0000000000000cdb (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
It shows that there is a region of conflict between IO regions of acpi
pci hotplug and acpi cpu hotplug.
Unfortunately, the change caf108bc58 did not update the IO address range
appropriately before it was pushed upstream to accommodate the increased
length of the IO address space introduced in change b32bd763a1.
Due to this bug, windows guests complain 'This device cannot find
enough free resources it can use' in the device manager panel for extended
IO buses. This issue also breaks the correct functioning of pci hotplug as the
following shows that the IO space for pci hotplug has been truncated:
(qemu) info mtree -f
FlatView #0
AS "I/O", root: io
Root memory region: io
0000000000000cc4-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000cf7 (prio 0, i/o): acpi-cpu-hotplug
Therefore, in this fix, we adjust the IO address range for the acpi pci
hotplug so that it does not conflict with cpu hotplug and there is no
truncation of IO spaces. The starting IO address of PCI hotplug region
has been decremented by four bytes in order to accommodate four byte
increment in the IO address space introduced by change
b32bd763a1 ("pci: introduce acpi-index property for PCI device")
After fixing, the following are the corrected IO ranges:
0000000000000600-0000000000000603 (prio 0, i/o): acpi-evt
0000000000000604-0000000000000605 (prio 0, i/o): acpi-cnt
0000000000000608-000000000000060b (prio 0, i/o): acpi-tmr
0000000000000620-000000000000062f (prio 0, i/o): acpi-gpe0
0000000000000630-0000000000000637 (prio 0, i/o): acpi-smi
0000000000000cc0-0000000000000cd7 (prio 0, i/o): acpi-pci-hotplug
0000000000000cd8-0000000000000ce3 (prio 0, i/o): acpi-cpu-hotplug
This change has been tested using a Windows Server 2019 guest VM. Windows
no longer complains after this change.
Fixes: caf108bc58 ("hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/561
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20210916132838.3469580-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian
conversions when building table and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
while at it, replace packed structure with endian agnostic
build_append_FOO() API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
while at it, replace packed structure with endian agnostic
build_append_FOO() API.
PS:
Spec is Microsoft hosted, however 1.02 is no where to be found
(MS lists only the current revision) and the current revision is 1.07,
so bring comments in line with 1.07 as this is the only available spec.
There is no content change between originally implemented 1.02
(using QEMU code as reference) and 1.07. The only change is renaming
'Reserved2' field to 'Language', with the same 0 value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building IORT table use endian agnostic build_append_int_noprefix()
API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210924122802.1455362-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Richard Henderson
Andrew Jones
Yanan Wang
Cédric Le Goater
Luc Michel
Mark Cave-Ayland
Jason Wang
Mathieu Poirier
Eric Auger
Eugenio Pérez
BALATON Zoltan
Kevin Wolf
Philippe Mathieu-Daudé
Andrew Jeffery
Peter Delevoryas
Philippe Mathieu-Daudé
Ani Sinha
Igor Mammedov