Commit Graph

20 Commits

Author SHA1 Message Date
Gleb Natapov 1ca4d09ae0 Add bootindex parameter to net/block/fd device
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:32:46 +00:00
Gleb Natapov dc1a46b609 Add get_fw_dev_path callback to IDE bus.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:27:48 +00:00
Gleb Natapov 3835510f10 Store IDE bus id in IDEBus structure for easy access.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:27:47 +00:00
Gleb Natapov 779206de67 Introduce fw_name field to DeviceInfo structure.
Add "fw_name" to DeviceInfo to use in device path building. In
contrast to "name" "fw_name" should refer to functionality device
provides instead of particular device model like "name" does.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 21:27:44 +00:00
Blue Swirl 2446333cd5 Rearrange block headers
Changing block.h or blockdev.h resulted in recompiling most objects.

Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24 15:22:24 +00:00
Markus Armbruster c4d74df726 ide: Make ide_init_drive() return success
It still always succeeds.  The next commits will add failures.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:49 +02:00
Markus Armbruster f597627ff5 ide: Improve error messages
Use error_report(), because it points to the error location.

Reword "tried to assign twice" messages to make it clear that we're
complaining about the unit property.

Report invalid unit property instead of failing silently.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:49 +02:00
Markus Armbruster c0897e0cb9 pc: Fix CMOS info for drives defined with -device
Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster 18846dee1a block: Catch attempt to attach multiple devices to a blockdev
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.

Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place.  Detach before the second attach
there.

Also catch attempt to delete while a guest device model is attached.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster f8b6cc0070 qdev: Decouple qdev_prop_drive from DriveInfo
Make the property point to BlockDriverState, cutting out the DriveInfo
middleman.  This prepares the ground for block devices that don't have
a DriveInfo.

Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device.  I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.

Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=...  Use drive_get_by_blockdev() there.

Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster fa12fbbece ide: Make it explicit that ide_create_drive() can't fail
All callers of ide_create_drive() ignore its value.  Currently
harmless, because it fails only when qdev_init() fails, which fails
only when ide_drive_initfn() fails, which never fails.

Brittle.  Change it to die instead of silently ignoring failure.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:01 +02:00
Markus Armbruster 666daa6823 blockdev: Collect block device code in new blockdev.c
Anything that moves hundreds of lines out of vl.c can't be all bad.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 15:20:47 +02:00
Markus Armbruster 0343240725 ide: Fix info qtree for ide-drive.ver
Show the actual default value instead of <null> when the property has
not been set.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster 6ced55a57d ide: Turn drive serial into a qdev property ide-drive.serial
It needs to be a qdev property, because it belongs to the drive's
guest part.

Bonus: info qtree now shows the serial number.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster 57dac7ef8a ide: Remove redundant IDEState member conf
Commit 428c149b added IDEState member conf to let commit 0009baf1 find
the BlockConf from there.  It exists only for qdev drives, created via
ide_drive_initfn(), not for drives created via ide_init2().

But for a qdev drive, we can just as well reach its IDEDevice, which
contains the BlockConf.  Do that, and revert the parts of commit
428c149b that add IDEState member conf.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Christoph Hellwig 428c149b0b block: add topology qdev properties
Add three new qdev properties to export block topology information to
the guest.  This is needed to get optimal I/O alignment for RAID arrays
or SSDs.

The options are:

 - physical_block_size to specify the physical block size of the device,
   this is going to increase from 512 bytes to 4096 kilobytes for many
   modern storage devices
 - min_io_size to specify the minimal I/O size without performance impact,
   this is typically set to the RAID chunk size for arrays.
 - opt_io_size to specify the optimal sustained I/O size, this is
   typically the RAID stripe width for arrays.

I decided to not auto-probe these values from blkid which might easily
be possible as I don't know how to deal with these issues on migration.

Note that we specificly only set the physical_block_size, and not the
logial one which is the unit all I/O is described in.  The reason for
that is that IDE does not support increasing the logical block size and
at last for now I want to stick to one meachnisms in queue and allow
for easy switching of transports for a given backing image which would
not be possible if scsi and virtio use real 4k sectors, while ide only
uses the physical block exponent.

To make this more common for the different block drivers introduce a
new BlockConf structure holding all common block properties and a
DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring
what is done for network drivers.  Also switch over all block drivers
to use it, except for the floppy driver which has weird driveA/driveB
properties and probably won't require any advanced block options ever.

Example usage for a virtio device with 4k physical block size and
8k optimal I/O size:

  -drive file=scratch.img,media=disk,cache=none,id=scratch \
  -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192

aliguori: updated patch to take into account BLOCK events

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 16:53:25 -06:00
Gerd Hoffmann 47c0634030 ide: device version property
This patch adds a new property named 'ver' to ide-drive which allows to
specify the version which the virtual disk/cdrom should report to the
guest.  By default this is the qemu version (i.e. 0.12).  usage:

  -drive if=none,id=disk,file=...
  -device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42

You can also switch the version for all ide drives using:

  -global ide-drive.ver=42

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:04 -06:00
Markus Armbruster 5c17ca2505 Clean up test for qdev_init() failure
Some callers test for != 0, some for < 0.  Normalize to < 0.

Patchworks-ID: 35171
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07 08:54:55 -05:00
Gerd Hoffmann 1f850f1064 switch ide bus to inplace allocation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:47 -05:00
Gerd Hoffmann da4d04197a ide/qdev: add ide bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15 19:23:34 +00:00