Commit Graph

13 Commits

Author SHA1 Message Date
Blue Swirl a08784dd11 Remove unused sysemu.h include directives
Remove unused sysemu.h include directives to speed up build
with the following patches.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-15 18:25:41 +00:00
Paolo Bonzini 7bd427d801 change all rt_clock references to use millisecond resolution accessors
This was done with:

    sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
        $(git grep -l 'get_clock\>.*rt_clock' )
    sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
        $(git grep -l 'new_timer\>.*rt_clock' )

after checking that get_clock and new_timer never occur twice
on the same line.  There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21 09:23:23 +01:00
Michael S. Tsirkin 3d002df33e migration: allow rate > 4g
I'd like to disable bandwidth limit or make it very high,
Use int64_t all over to make values >= 4g work.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-02 21:13:39 +02:00
Marcelo Tosatti e447b1a603 set proper migration status on ->write error (v5)
If ->write fails, declare migration status as MIG_STATE_ERROR.

Also, in buffered_file.c, ->close the object in case of an
error.

Fixes "migrate -d "exec:dd of=file", where dd fails to open file.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19 08:44:37 -05:00
Avi Kivity 5e77aaa0d7 QEMUFileBuffered: indicate that we're ready when the underlying file is ready
QEMUFileBuffered stops writing when the underlying QEMUFile is not ready,
and tells its producer so.  However, when the underlying QEMUFile becomes
ready, it neglects to pass that information along, resulting in stoppage
of all data until the next tick (a tenths of a second).

Usually this doesn't matter, because most QEMUFiles used with QEMUFileBuffered
are almost always ready, but in the case of exec: migration this is not true,
due to the small pipe buffers used to connect to the target process.  The
result is very slow migration.

Fix by detecting the readiness notification and propagating it.  The detection
is a little ugly since QEMUFile overloads put_buffer() to send it, but that's
the suject for a different patch.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-19 08:44:37 -05:00
malc d0f2c4c602 Do not use dprintf
dprintf is already claimed by POSIX[1], and on at least one system
is implemented as a macro

[1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html

Signed-off-by: malc <av1474@comtv.ru>
2010-02-07 02:03:50 +03:00
lirans@il.ibm.com c163b5cae9 Block live migration
This patch introduces block migration called during live migration. Block
are being copied to the destination in an async way. First the code will
transfer the whole disk and then transfer all dirty blocks accumulted during
the migration.
Still need to improve transition from the iterative phase of migration to the
end phase. For now transition will take place when all blocks transfered once,
all the dirty blocks will be transfered during the end phase (guest is
suspended).

Changes from v4:
- Global variabels moved to a global state structure allocated dynamically.
- Minor coding style issues.
- Poll block.c for tracking of dirty blocks instead of manage it here.

Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17 08:49:30 -06:00
Pierre Riteau 9ab35c6371 Fix compilation warnings when DEBUG_BUFFERED_FILE is defined
gcc 4.3.2 throws warnings when DEBUG_BUFFERED_FILE is defined, because
we are using the wrong format specifiers to print size_t/ssize_t values.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 17:31:26 -05:00
Blue Swirl 0bf9e31af1 Fix most warnings (errors with -Werror) when debugging is enabled
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-20 17:19:25 +00:00
Glauber Costa 19629537bd introduce set_rate_limit function for QEMUFile
This patch converts the current callers of qemu_fopen_ops().

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:30 -05:00
aliguori 1eec614b36 toplevel: remove error handling from qemu_malloc() callers (Avi Kivity)
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05 22:06:18 +00:00
blueswir1 1d6198c3b0 Remove unnecessary trailing newlines
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13 09:32:43 +00:00
aliguori 39b65c2e31 Introduce a buffered file wrapper for QEMUFile
This patch introduces a buffered QEMUFile wrapper.  This allows QEMUFile's to be
rate limited.  It also makes it easier to implement a QEMUFile that is
asynchronous since the current QEMUFile API requires that all reads and writes
be synchronous.

The only real non-obvious part of the API is the "frozen" concept.  If the
backend returns EAGAIN, the QEMUFile is said to be "frozen".  This means no
additional output will be sent to the backend until the file is unfrozen.
qemu_file_put_notify can be used to unfreeze a frozen file.

A synchronous interface is also provided to wait for an unfreeze event.  This is
used during the final part of live migration when the VM is no longer running.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5475 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-13 03:10:22 +00:00