The Cortex-A7 core is only available when TCG is enabled (see
commit 80485d88f9 "target/arm: Restrict v7A TCG cpus to TCG accel").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230405100848.76145-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the limit check. If the limit is less than the compare value,
the timer can never reach this value, thus it will never fire.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1491
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-2@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue reported by Coverity.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-1@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cubieboard tests end with comment "reboot not functioning; omit test".
Fix this so reboot is done at the end of each test.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-5-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-H3 and Orangepi-PC.
WDT is added as an overlay to the Timer module memory area.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-A10 and Cubieboard.
WDT is added as an overlay to the Timer module memory map.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds basic support for Allwinner WDT.
Both sun4i and sun6i variants are supported.
However, interrupt generation is not supported, so WDT can be used only to trigger system reset.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-2-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One of the debug printfs in exynos4210_gcomp_find() will
access outside the 's->g_timer.reg.comp[]' array if there
was no active comparator and 'res' is -1. Add a conditional
to avoid this.
This doesn't happen in normal use because the debug printfs
are by default not compiled in.
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Message-id: 20230404074506.112615-1-jiangfeng@kylinos.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Adjusted commit message to clarify that the overrun
only happens if you've enabled debug printfs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230409200526.1156456-1-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Last patches found:
- peter xu preempt channel fixes.
needed for backward compatibility with old machine types.
- lukas fix to get compress working again.
- fix ram on s390x. Get back to the old code, even when it shouldn't
be needed, but as it fails on s390x, just revert.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=kW3P
-----END PGP SIGNATURE-----
Merge tag 'migration-20230412-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request for 8.0
Last patches found:
- peter xu preempt channel fixes.
needed for backward compatibility with old machine types.
- lukas fix to get compress working again.
- fix ram on s390x. Get back to the old code, even when it shouldn't
be needed, but as it fails on s390x, just revert.
Later, Juan.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmQ3HgQACgkQ9IfvGFhy
# 1yPXGQ/+Pf6HepNUlIr7naYOcpRriXPQF+q1zqo74F9fy2vrGcwJOI6qmRTjsX4E
# 9KgXipOz7+b5wSemF7PDKcnBiwyt6UHCH+XXe0h4TpyuORbtABKRgtOhA1/sa84D
# HnKp0TwImpAO26tzPa7u49aau/EEVBKAzFVcyn4w56S9qiDWicOpd5kG0CJBIsMJ
# Mnvy5fXaqQRewnKiwFoJGWfyhzEToDO6Z/SkT5xYON94P+eiM2xMwXOC5WcGfmY7
# wFGDB+SuyEP8TTn7mV0mmnlFjYe4G07hVARHSDFX3ho4b6q5F+WzfW095G6QKiu9
# n3Pzr7IBGX3sgetPtYwOwGsE9JrfHMFzBRxQZZwq5GSmjk7+agkbXmV7RyV82EYs
# KYOhuNF91ca0qvCrGA/eGbbJqVrd7SR5FhS4SQ7oKd5n2au/ZHoKwAgm5lBdcvES
# 2TB0MBN1s0JPh6KMV8tPB2miZyqPRa++oA8qIX7Asoe1X4xVT1FwiDaFL8TO8i2A
# 7uBis3KLZqOHC6dAiXlCDtaADAWgQxjcdoS1l8jTF6MgBSe+zQhXG+pcIDuSiV9N
# WfDiUPY97iqPTvpzdz3Is+LbBax2uY5ZR05KSdmCBpIgfvSWMqXtwRydclt6G5h7
# ZiOcTwrgMpXdbhdsFZTqVWAJG2sTkj4TA+IezVpXzPeQNLZ+T8k=
# =kW3P
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Apr 2023 22:09:24 BST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230412-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: fix ram_state_pending_exact()
migration/ram.c: Fix migration with compress enabled
migration: Recover behavior of preempt channel creation for pre-7.2
migration: Fix potential race on postcopy_qemufile_src
io: tls: Inherit QIO_CHANNEL_FEATURE_SHUTDOWN on server side
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity spotted a double-free (CID 1508254); we g_string_free(path) and
then for some reason immediately call free(path) too.
We should just use g_autoptr() for it anyway, which simplifies the code
a bit.
Fixes: 7a8a749da7 ("hw/xen: Move xenstore_store_pv_console_info to xen_console.c")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I removed that bit on commit:
commit c8df4a7aef
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Oct 3 02:00:03 2022 +0200
migration: Split save_live_pending() into state_pending_*
Fixes: c8df4a7aef
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since ec6f3ab9, migration with compress enabled was broken, because
the compress threads use a dummy QEMUFile which just acts as a
buffer and that commit accidentally changed it to use the outgoing
migration channel instead.
Fix this by using the dummy file again in the compress threads.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In 8.0 devel window we reworked preempt channel creation, so that there'll
be no race condition when the migration channel and preempt channel got
established in the wrong order in commit 5655aab079.
However no one noticed that the change will also be not compatible with
older qemus, majorly 7.1/7.2 versions where preempt mode started to be
supported.
Leverage the same pre-7.2 flag introduced in the previous patch to recover
the behavior hopefully before 8.0 releases, so we don't break migration
when we migrate from 8.0 to older qemu binaries.
Fixes: 5655aab079 ("migration: Postpone postcopy preempt channel to be after main")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_qemufile_src object should be owned by one thread, either the main
thread (e.g. when at the beginning, or at the end of migration), or by the
return path thread (when during a preempt enabled postcopy migration). If
that's not the case the access to the object might be racy.
postcopy_preempt_shutdown_file() can be potentially racy, because it's
called at the end phase of migration on the main thread, however during
which the return path thread hasn't yet been recycled; the recycle happens
in await_return_path_close_on_source() which is after this point.
It means, logically it's posslbe the main thread and the return path thread
are both operating on the same qemufile. While I don't think qemufile is
thread safe at all.
postcopy_preempt_shutdown_file() used to be needed because that's where we
send EOS to dest so that dest can safely shutdown the preempt thread.
To avoid the possible race, remove this only place that a race can happen.
Instead we figure out another way to safely close the preempt thread on
dest.
The core idea during postcopy on deciding "when to stop" is that dest will
send a postcopy SHUT message to src, telling src that all data is there.
Hence to shut the dest preempt thread maybe better to do it directly on
dest node.
This patch proposed such a way that we change postcopy_prio_thread_created
into PreemptThreadStatus, so that we kick the preempt thread on dest qemu
by a sequence of:
mis->preempt_thread_status = PREEMPT_THREAD_QUIT;
qemu_file_shutdown(mis->postcopy_qemufile_dst);
While here shutdown() is probably so far the easiest way to kick preempt
thread from a blocked qemu_get_be64(). Then it reads preempt_thread_status
to make sure it's not a network failure but a willingness to quit the
thread.
We could have avoided that extra status but just rely on migration status.
The problem is postcopy_ram_incoming_cleanup() is just called early enough
so we're still during POSTCOPY_ACTIVE no matter what.. So just make it
simple to have the status introduced.
One flag x-preempt-pre-7-2 is added to keep old pre-7.2 behaviors of
postcopy preempt.
Fixes: 9358982744 ("migration: Send requested page directly in rp-return thread")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
TLS iochannel will inherit io_shutdown() from the master ioc, however we
missed to do that on the server side.
This will e.g. allow qemu_file_shutdown() to work on dest QEMU too for
migration.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since the former nfs_get_allocated_file_size is now a coroutine
function, it must suspend rather than poll. Switch BDRV_POLL_WHILE()
to a qemu_coroutine_yield() loop and schedule nfs_co_generic_bh_cb()
in place of the call to bdrv_wakeup().
Fixes: 82618d7bc3 ("block: Convert bdrv_get_allocated_file_size() to co_wrapper", 2023-02-01)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230412112606.80983-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The iocb (and the allocated memory to hold LBA ranges) leaks if reading
the LBA ranges fails.
Fix this by adding a free and an unref of the iocb.
Reported-by: Coverity (CID 1508281)
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Coverity reports a memory leak of memory when parsing ruhids at
namespace initialization. Since this is just working memory, not needed
beyond the scope of the functions, fix this by adding a g_autofree
annotation.
Reported-by: Coverity (CID 1507979)
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The introduction of the graph lock is causing blk_get_geometry, a hot function
used in the I/O path, to create a coroutine. However, the only part that really
needs to run in coroutine context is the call to bdrv_co_refresh_total_sectors,
which in turn only happens in the rare case of host CD-ROM devices.
So, write by hand the three wrappers on the path from blk_co_get_geometry to
bdrv_co_refresh_total_sectors, so that the coroutine wrapper is only created
if bdrv_nb_sectors actually calls bdrv_refresh_total_sectors.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of blk_co_nb_sectors (and blk_nb_sectors) are able to
handle a non-inserted CD-ROM as a zero-length file, they do not need
to raise an error.
Not using blk_co_is_available() aligns the function with
blk_co_get_geometry(), which becomes a simple wrapper for
blk_co_nb_sectors(). It will also make it possible to skip the creation
of a coroutine in the (common) case where bs->bl.has_variable_length
is false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-8-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_geometry is only used in blk_co_get_geometry. Inline it in
there, to reduce the number of wrappers for bs->total_sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Uses of blk_nb_sectors must check whether the result is negative.
Otherwise, underflow can happen. Fortunately, alloc_aio_bitmap()
and bmds_aio_inflight() both have an alternative way to retrieve the
number of sectors in the file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-6-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reopening a BlockDriverState, it's possible that the size of the
underlying file has changed. This for example is covered by test 171.
Right now, this is handled by the raw driver's has_variable_length = true
setting. Since this will be removed by the next patch, handle it on
reopen instead, together with the existing bdrv_refresh_limits.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-4-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filters automatically get has_variable_length from their underlying
BlockDriverState. There is no need to mark them as variable-length
in the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-3-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 8461bfdca9 we added the TYPE_AW_I2C_SUN6I, which is a
minor variant of the TYPE_AW_I2C device. However, we didn't quite
get the class hierarchy right. We made the new TYPE_AW_I2C_SUN6I a
subclass of TYPE_SYS_BUS_DEVICE, which means that you can't validly
use a pointer to this object via the AW_I2C() cast macro, which
insists on having something that is an instance of TYPE_AW_I2C or
some subclass of that type.
This only causes a problem if QOM cast macro debugging is enabled;
that is supposed to be on by default, but a mistake in the meson
conversion in commit c55cf6ab03 meant that it ended up disabled by
default, and we didn't catch this bug.
Fix the problem by arranging the classes in the same way we do for
TYPE_PL011 and TYPE_PL011_LUMINARY in hw/char/pl011.c -- make the
variant class be a subclass of the "normal" version of the device.
This was reported in
https://gitlab.com/qemu-project/qemu/-/issues/1586 but this fix alone
isn't sufficient, as there is a separate cast-related issue in the
CXL code in pci_expander_bridge.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The corruption occurs when a BAT entry aligned to 4096 bytes is changed.
Specifically, the corruption occurs during the creation of the LOG Data
Descriptor. The incorrect behavior involves copying 4088 bytes from the
original 4096 bytes aligned offset to `tmp[8..4096]` and then copying
the new value for the first BAT entry to the beginning `tmp[0..8]`.
This results in all existing BAT entries inside the 4K region being
incorrectly moved by 8 bytes and the last entry being lost.
This bug did not cause noticeable corruption when only sequentially
writing once to an empty dynamic VHDX (e.g.
using `qemu-img convert -O vhdx -o subformat=dynamic ...`), but it
still resulted in invalid values for the (unused) Sector Bitmap BAT
entries.
Importantly, this corruption would only become noticeable after the
corrupted BAT is re-read from the file.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/727
Cc: qemu-stable@nongnu.org
Signed-off-by: Lukas Tschoke <lukts330@gmail.com>
Message-Id: <6cfb6d6b-adc5-7772-c8a5-6bae9a0ad668@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For both _CALL_SYSV and _CALL_DARWIN, return is by reference,
not in 4 integer registers. For _CALL_SYSV, argument is also
by reference.
This error resulted in
$ ./qemu-system-i386 -nographic
qemu-system-i386: tcg/ppc/tcg-target.c.inc:185: \
tcg_target_call_oarg_reg: Assertion `slot >= 0 && slot <= 1' failed.
Fixes: 5427a9a760 ("tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128")
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return is by reference, not in 4 integer registers.
This error resulted in
qemu-system-i386: tcg/mips/tcg-target.c.inc:140: \
tcg_target_call_oarg_reg: Assertion `slot >= 0 && slot <= 1' failed.
Fixes: 5427a9a760 ("tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can arrive here on _WIN64 because Int128 is passed by reference.
Change the assert to check that the immediate is in range,
instead of attempting to check the host ABI.
Fixes: 6a6d772e30 ("tcg: Introduce tcg_out_addi_ptr")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1581
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The guarded bit comes from the stage1 walk.
Fixes: Coverity CID 1507929
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only perform the extract of GP during the stage1 walk.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a crash writing to 't3', which is now a constant.
Instead, write the result of the remu to 't0'.
Fixes: 7058ff5231 ("target/ppc: Avoid tcg_const_* in translate.c")
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ clg: amend commit log s/t1/t0/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix use-after-free errors in the code path that called error_handle(). A
call to error_handle() will now either free the passed Error 'err' or
assign it to '*errp' if '*errp' is currently NULL. This ensures that 'err'
either has been freed or is assigned to '*errp' if this function returns.
Adjust the two callers of this function to not assign the 'err' to '*errp'
themselves, since this is now handled by error_handle().
Fixes: commit 3ffef1a55c ("error: add global &error_warn destination")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230406154347.4100700-1-stefanb@linux.ibm.com
This reverts commit 6da2434186
("memory: Optimize replay of guest mapping").
This change breaks the mps3-an547 board under TCG (and
probably other TCG boards using an IOMMU), which now
assert:
$ ./build/x86/qemu-system-arm --machine mps3-an547 -serial stdio
-kernel /tmp/an547-mwe/build/test.elf
qemu-system-arm: ../../softmmu/memory.c:1903:
memory_region_register_iommu_notifier: Assertion `n->end <=
memory_region_size(mr)' failed.
This is because tcg_register_iommu_notifier() registers
an IOMMU notifier which covers the entire address space,
so the assertion added in this commit is not correct.
For the 8.0 release, just revert this commit as it is
only an optimization.
Fixes: 6da2434186 ("memory: Optimize replay of guest mapping")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 917c1c552b2d1b732f9a86c6a90684c3a5e4cada.1680640587.git.mst@redhat.com
