These structures are misnomers, somewhat.
(1) BlockTransactionState is not state for a transaction,
but is rather state for a single transaction action.
Rename it "BlkActionState" to be more accurate.
(2) The BdrvActionOps describes operations for the BlkActionState,
above. This name might imply a 'BdrvAction' or a 'BdrvActionState',
which there isn't.
Rename this to 'BlkActionOps' to match 'BlkActionState'.
Lastly, update the surrounding in-line documentation and comments
to reflect the current nature of how Transactions operate.
This patch changes only comments and names, and should not affect
behavior in any way.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. In
compliance to the bdrv_drain semantics we should make sure it remains
deleted once .bdrv_drain is called.
We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy
the assertion. Do the "plug" and "flush" calls manually.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This command is still experimental, hence the name.
This is the companion to 'blockdev-add'. It allows deleting a
BlockBackend with its associated BlockDriverState tree, or a
BlockDriverState that is not attached to any backend.
In either case, the command fails if the reference count is greater
than 1 or the BlockDriverState has any parents.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6cfc148c77aca1da942b094d811bfa3fcf7ac7bb.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are two ways to check for I/O limits in a BlockDriverState:
- bs->throttle_state: if this pointer is not NULL, it means that this
BDS is member of a throttling group, its ThrottleTimers structure
has been initialized and its I/O limits are ready to be applied.
- bs->io_limits_enabled: if true it means that the throttle_state
pointer is valid _and_ the limits are currently enabled.
The latter is used in several places to check whether a BDS has I/O
limits configured, but what it really checks is whether requests
are being throttled or not. For example, io_limits_enabled can be
temporarily set to false in cases like bdrv_read_unthrottled() without
otherwise touching the throtting configuration of that BDS.
This patch replaces bs->io_limits_enabled with bs->throttle_state in
all cases where what we really want to check is the existence of I/O
limits, not whether they are currently enabled or not.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One of the limitations of the 'blockdev-snapshot-sync' command is that
it does not allow passing BlockdevOptions to the newly created
snapshots, so they are always opened using the default values.
Extending the command to allow passing options is not a practical
solution because there is overlap between those options and some of
the existing parameters of the command.
This patch introduces a new 'blockdev-snapshot' command with a simpler
interface: it just takes two references to existing block devices that
will be used as the source and target for the snapshot.
Since the main difference between the two commands is that one of them
creates and opens the target image, while the other uses an already
opened one, the bulk of the implementation is shared.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will introduce the 'blockdev-snapshot' command that will require
its own struct for the parameters, so we need to rename this one in
order to avoid name clashes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'snapshot-node-name' parameter of blockdev-snapshot-sync allows
setting the node name of the image that is going to be created.
Before creating the image, external_snapshot_prepare() checks that the
name is not already being used. The check is however incomplete since
it only considers existing node names, but node names must not clash
with device IDs either because they share the same namespace.
If the user attempts to create a snapshot using the name of an
existing device for the 'snapshot-node-name' parameter the operation
will eventually fail, but only after the new image has been created.
This patch replaces bdrv_find_node() with bdrv_lookup_bs() to extend
the check to existing device IDs, and thus detect possible name
clashes before the new image is created.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an option to qmp_blockdev_change_medium() which allows changing the
read-only status of the block device whose medium is changed.
Some drives do not have a inherently fixed read-only status; for
instance, floppy disks can be set read-only or writable independently of
the drive. Some users may find it useful to be able to therefore change
the read-only status of a block device when changing the medium.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
qmp_blockdev_change_medium().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement 'change' on block devices by calling blockdev-open-tray,
blockdev-remove-medium, blockdev-insert-medium (a variation of that
which does not need a node-name) and blockdev-close-tray.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement 'eject' by calling blockdev-open-tray and
blockdev-remove-medium.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
And a helper function for that, which directly takes a pointer to the
BDS to be inserted instead of its node-name (which will be used for
implementing 'change' using blockdev-insert-medium).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one slipped through. Although we acquire AioContext when
committing all devices we don't for just a single device.
AioContext must be acquired before calling bdrv_*() functions to
synchronize access with other threads that may be using the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for block-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-16-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This ensures the atomicity of the transaction by avoiding processing of
external requests such as those from ioeventfd.
state->bs is assigned right after bdrv_drained_begin. Because it was
used as the flag for deletion or not in abort, now we need a separate
flag - InternalSnapshotState.created.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to the previous patch, make sure that external events are not
dispatched during transaction operations.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This ensures the atomicity of the transaction by avoiding processing of
external requests such as those from ioeventfd.
Move the assignment to state->bs up right after bdrv_drained_begin, so
that we can use it in the clean callback. The abort callback will still
check bs->job and state->job, so it's OK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This ensures the atomicity of the transaction by avoiding processing of
external requests such as those from ioeventfd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most of the options which blockdev_init() parses for both the
BlockBackend and the root BDS are valid for just the root BDS as well
(e.g. read-only). This patch allows specifying these options even if not
creating a BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract some of the blockdev option extraction code from blockdev_init()
into its own function. This simplifies blockdev_init() and will allow
reusing the code in a different function added in a follow-up patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do not use "rudimentary" BDSs for empty drives any longer (for
freshly created drives).
After a follow-up patch, empty drives will generally use a NULL BDS, not
only the freshly created drives.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the "id" field is missing from the options given to blockdev-add,
just omit the BlockBackend and create the BlockDriverState tree alone.
However, if "id" is missing, "node-name" must be specified; otherwise,
the BDS tree would no longer be accessible.
Many BDS options which are not parsed by bdrv_open() (like caching)
cannot be specified for these BB-less BDS trees yet. A future patch will
remove this limitation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This flag should not be set for the root BDS only, but for any BDS that
is being created while incoming migration is pending, so setting it is
moved from blockdev_init() to bdrv_fill_options().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CONFIG_LINUX_AIO is an implementation detail of raw-posix.c. Don't
mention CONFIG_LINUX_AIO in blockdev.c. Let block drivers decide what
to do with BDRV_O_NATIVE_AIO. They may print an error if it is
unsupported.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remember all parent nodes and just change the pointers there instead of
swapping the contents of the BlockDriverState.
Handling of snapshot=on must be moved further down in bdrv_open()
because *pbs (which is the bs pointer in the BlockBackend) must already
be set before bdrv_append() is called. Otherwise bdrv_append() changes
the BB's pointer to the temporary snapshot, but bdrv_open() overwrites
it with the read-only original image.
We also need to be careful to update callers as the interface changes
(becomes less insane): Previously, the meaning of the two parameters was
inverted when bdrv_append() returns. Now any BDS pointers keep pointing
to the same node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the final step in converting all of the BlockDriverState
pointers that block drivers use to BdrvChild.
After this patch, bs->children contains the full list of child nodes
that are referenced by a given BDS, and these children are only
referenced through BdrvChild, so that updating the pointer in there is
enough for changing edges in the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We use mirror+replace to fix quorum's broken child. bs/s->common.bs
is quorum, and to_replace is the broken child. The new child is target_bs.
Without this patch, the replace node can be any node, and it can be
top BDS with BB, or another quorum's child. We just check if the broken
child is part of the quorum BDS in this patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-id: 55A86486.1000404@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The bps_max/iops_max values are meaningless without corresponding
bps/iops values. Reported an error if bps_max/iops_max is given without
bps/iops.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1438683733-21111-2-git-send-email-stefanha@redhat.com
If bus_size is less than 0, the command fails.
If buf_size is 0, use DEFAULT_MIRROR_BUF_SIZE.
If buf_size % granularity is not 0, mirror_free_init() will
do dangerous things.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 5555A588.3080907@cn.fujitsu.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Draining is not necessary, I/O can happen as soon as the
commit coroutine yields. Draining can be necessary before
reopening the file for read/write, or while modifying the
backing file chain, but that is done separately in
bdrv_reopen_multiple or bdrv_close; this particular
bdrv_drain_all does nothing for that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432822903-25821-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
If specified as "true", it allows discarding on target sectors where source is
not allocated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_close already does that, and in fact hmp_drive_del would need
another drain after the flush (which bdrv_close does). So remove
the duplication.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432822629-25401-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We now finally have TCG support for the basic set of instructions necessary
to run the s390-ccw machine. That means in any aspect possible that machine
type is now superior to the legacy s390-virtio machine.
Switch over to the ccw machine as default. That way people don't get a halfway
broken machine with the s390x target.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=QgYk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
The throttle group support use a cooperative round robin scheduling
algorithm.
The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
timer.
- If a wait must be done the token timer will be armed so the token
will become the next active BDS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
For drive_del, that's easy: hmp_drive_del() sheds its unused last
parameter, and its return value, which the caller ignored anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We often don't need the BlockDriverState for functions
that operate on bitmaps. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_clear_dirty_bitmap and a matching QMP command,
qmp_block_dirty_bitmap_clear that enables a user to reset
the bitmap attached to a drive.
This allows us to reset a bitmap in the event of a full
drive backup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A bitmap successor is an anonymous BdrvDirtyBitmap that is intended to
be created just prior to a sensitive operation (e.g. Incremental Backup)
that can either succeed or fail, but during the course of which we still
want a bitmap tracking writes.
On creating a successor, we "freeze" the parent bitmap which prevents
its deletion, enabling, anonymization, or creating a bitmap with the
same name.
On success, the parent bitmap can "abdicate" responsibility to the
successor, which will inherit its name. The successor will have been
tracking writes during the course of the backup operation. The parent
will be safely deleted.
On failure, we can "reclaim" the successor from the parent, unifying
them such that the resulting bitmap describes all writes occurring since
the last successful backup, for instance. Reclamation will thaw the
parent, but not explicitly re-enable it.
BdrvDirtyBitmap operations that target a single bitmap are protected
by assertions that the bitmap is not frozen and/or disabled.
BdrvDirtyBitmap operations that target a group of bitmaps, such as
bdrv_{set,reset}_dirty will ignore frozen/disabled drives with a
conditional instead.
Internal functions that enable/disable dirty bitmaps have assertions
added to them to prevent modifying frozen bitmaps.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new command pair is added to manage a user created dirty bitmap. The
dirty bitmap's name is mandatory and must be unique for the same device,
but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will
choose a default granularity based on the cluster size if available,
clamped to between 4K and 64K to mirror how the 'mirror' code was
already choosing granularity. If we do not have cluster size info
available, we choose 64K. This code has been factored out into a helper
shared with block/mirror.
This patch also introduces the 'block_dirty_bitmap_lookup' helper,
which takes a device name and a dirty bitmap name and validates the
lookup, returning NULL and setting errp if there is a problem with
either field. This helper will be re-used in future patches in this
series.
The types added to block-core.json will be re-used in future patches
in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image field in BlockDeviceInfo is supposed to contain an ImageInfo
object. However that is being filled in by bdrv_query_info(), not by
bdrv_block_device_info(), which is where BlockDeviceInfo is actually
created.
Anyone calling bdrv_block_device_info() directly will get a null image
field. As a consequence of this, the HMP command 'info block -n -v'
crashes QEMU.
This patch moves the code that fills in that field from
bdrv_query_info() to bdrv_block_device_info().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1429271563-3765-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several error messages that identify a BlockDriverState by
its device name. However those errors can be produced in nodes that
don't have a device name associated.
In those cases we should use bdrv_get_device_or_node_name() to fall
back to the node name and produce a more meaningful message. The
messages are also updated to use the more generic term 'node' instead
of 'device'.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch changes block_job_pause to increase the pause counter and
block_job_resume to decrease it.
The counter will allow calling block_job_pause/block_job_resume
unconditionally on a job when we need to suspend the IO temporarily.
From now on, each block_job_resume must be paired with a block_job_pause
to keep the counter balanced.
The user pause from QMP or HMP will only trigger block_job_pause once
until it's resumed, this is achieved by adding a user_paused flag in
BlockJob.
One occurrence of block_job_resume in mirror_complete is replaced with
block_job_enter which does what is necessary.
In block_job_cancel, the cancel flag is good enough to instruct
coroutines to quit loop, so use block_job_enter to replace the unpaired
block_job_resume.
Upon block job IO error, user is notified about the entering to the
pause state, so this pause belongs to user pause, set the flag
accordingly and expect a matching QMP resume.
[Extended doc comments as suggested by Paolo Bonzini
<pbonzini@redhat.com>.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit
b7b9d39..7c6a4ab added uses of ERROR_CLASS_DEVICE_NOT_FOUND. Replace
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't convert numbers to strings for use with qemu_opt_set(), simply
use qemu_opt_set_number() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Due to different error propagation, this breaks tests 051 and 087; fix
their output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-4-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments. This trickiness has become pointless. Clean
this one up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-3-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When find_block_job() fails, all its callers build the same Error
object. Build it in find_block_job() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-2-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Like BLOCK_OP_TYPE_BACKUP_SOURCE and BLOCK_OP_TYPE_BACKUP_TARGET,
block-commit involves two asymmetric devices.
This change is not user-visible (yet), because commit only works with
device names.
But once we enable backing reference in blockdev-add, or specifying
node-name in block-commit command, we don't want the user to start two
commit jobs on the same backing chain, which will corrupt things because
of the final bdrv_swap.
Before we have per category blockers, splitting this type is still
better.
[Resolved virtio-blk dataplane conflict by replacing
BLOCK_OP_TYPE_COMMIT with both BLOCK_OP_TYPE_COMMIT_{SOURCE, TARGET}.
They are safe since the block job runs in the same AioContext as the
dataplane IOThread.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT op blocker exists but was never
used! Let's fix that so internal snapshots can be blocked.
[Fixed s/external/internal/ typo as pointed out by Paolo Bonzini and Max
Reitz.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The transaction QMP command performs operations atomically on a group of
drives. This command needs to acquire AioContext in order to work
safely when virtio-blk dataplane IOThreads are accessing drives.
The transactional nature of the command means that actions are split
into prepare, commit, abort, and clean functions. Acquire the
AioContext in prepare and don't release it until one of the other
functions is called. This prevents the IOThread from running the
AioContext before the transaction has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-4-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_backup_prepare() assigns DriveBackupState fields to NULL in the
error path. This is unnecessary because the DriveBackupState is
allocated using g_malloc0() and other functions like
external_snapshot_prepare() already rely on this.
Do not explicitly assign fields to NULL so that the error path is
concise and does not require modification when fields are added to
DriveBackupState.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally the transaction QMP command was just for taking snapshots.
The command became more general when drive-backup and abort were added.
It is more accurate to say the command is about performing operations on
an atomic group than to say it is about snapshots.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-2-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add dataplane support to the change-backing-file QMP commands. By
acquiring the AioContext we avoid race conditions with the dataplane
thread which may also be accessing the BlockDriverState.
Note that this command operates on both bs and a node in its chain
(image_bs). The bdrv_chain_contains(bs, image_bs) check guarantees that
bs and image_bs are in the same AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By acquiring the AioContext we avoid race conditions with the dataplane
thread which may also be accessing the BlockDriverState.
Fix up eject, change, and block_passwd in a single patch because
qmp_eject() and qmp_change_blockdev() both call eject_device(). Also
fix block_passwd while we're tackling a command that takes a block
encryption password.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE op blocker exists but was
never used! Let's fix that so snapshot delete can be blocked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add dataplane support to the blockdev-snapshot-delete-internal-sync QMP
command. By acquiring the AioContext we avoid race conditions with the
dataplane thread which may also be accessing the BlockDriverState.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commit block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
One detail here is that the bdrv_drain_all() must be moved inside the
aio_context_acquire() region so requests cannot sneak in between the
drain and acquire.
The completion code in block/commit.c must perform backing chain
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-11-git-send-email-stefanha@redhat.com
The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
The stream block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The tricky part is the completion code which drops part of the backing
file chain. This must be done in the main loop where bdrv_unref() and
bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to
achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
The backup block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The completion code in block/backup.c must call bdrv_unref() from the
main loop. Use block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
This function is correct but we should document the constraint that
everything must be thread-safe.
Emitting QMP events and scheduling BHs are both thread-safe so nothing
needs to be done here.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-5-git-send-email-stefanha@redhat.com
When an emulated storage controller is unrealized it will call
blockdev_mark_auto_del(). This will cancel any running block job (and
that eventually releases its reference to the BDS so it can be freed).
Since the block job may be executing in another AioContext we must
acquire/release to ensure thread safety.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-4-git-send-email-stefanha@redhat.com
Make sure that query-block-jobs acquires the BlockDriverState
AioContext so that the blockjob isn't running in another thread while we
access its state.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-3-git-send-email-stefanha@redhat.com
block-job-set-speed, block-job-cancel, block-job-pause,
block-job-resume, and block-job-complete must acquire the
BlockDriverState AioContext so that it is safe to access bs.
At the moment bs->job is always NULL when dataplane is active because op
blockers prevent blockjobs from starting. Once the rest of the blockjob
API has been made aware of AioContext we can drop the op blocker.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-2-git-send-email-stefanha@redhat.com
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Much more command code needs conversion. I'm converting these now
because they're using bdrv_dev_* functions, which I'm about to lift
into BlockBackend.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_del() has become a trivial wrapper around blk_unref(). Get rid
of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On BlockBackend destruction, unref its BlockDriverState. Replaces the
callers' unrefs.
This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref(). The
back-pointer remains weak.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the BlockBackend own the DriveInfo. Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.
This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586
[Resolved conflict with commit 5abbf0ee4d
("block: Catch simultaneous usage of options and their aliases"). Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While thinking about precedence of conflicting block device options from
different sources, I noticed that you can specify both an option and its
legacy alias at the same time (e.g. readonly=on,read-only=off). Rather
than specifying the order of precedence, we should simply forbid such
combinations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Instead of a series of qemu_opt_rename() calls, use an array that
contains all of the renames and call qemu_opt_rename() in a loop. This
will keep the code readable even when we add an error return to
qemu_opt_rename().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() mixes up BlockDriverState and DriveInfo initialization
Finish the BlockDriverState job before starting to mess with
DriveInfo. Easier on the eyes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some device models, the guest can prevent unplug. Some users need a
way to forcibly revoke device model access to the block backend then, so
the underlying images can be safely used for something else.
drive_del lets you do that. Unfortunately, it conflates revoking access
with destroying the backend.
Commit 9063f81 made drive_del immediately destroy the root BDS. Nice:
the device name becomes available for reuse immediately. Not so nice:
the device model's pointer to the root BDS dangles, and we're prone to
crash when the memory gets reused.
Commit d22b2f4 fixed that by hiding the root BDS instead of destroying
it. Destruction only happens on unplug. "Hiding" means removing it
from bdrv_states and graph_bdrv_states; see bdrv_make_anon().
This "destroy on revoke" is a misfeature we don't want to carry
forward to blockdev-add, just like "destroy on unplug" (commit
2d246f0). So make drive_del fail on anything added with blockdev-add.
We'll add separate QMP commands to revoke device model access and to
destroy backends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
relaxing the license to LGPLv2+ is intentional.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make drive_del safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Note the assumption that AioContext's lifetime exceeds DriveInfo and
BlockDriverState. We release AioContext after DriveInfo and
BlockDriverState are potentially freed.
This is clearly safe with the global AioContext but also with -object
iothread and implicit iothreads created by -device
virtio-blk-pci,x-data-plane=on (their lifetime is tied to DeviceState,
not BlockDriverState).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Name the 'granularity' parameter and give its expected value range.
Previously the device name was mistakenly reported as the parameter
name.
Note that the error class is unchanged from ERROR_CLASS_GENERIC_ERROR.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Make block_resize safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows a user to make a live change to the backing file recorded in
an open image.
The image file to modify can be specified 2 ways:
1) image filename
2) image node-name
Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.
It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.
A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.
[Jeff is offline so I respun this patch in his absence. Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new argument can be used to specify the node-name of the new mirrored BDS.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we check for the RESIZE blocker in bdrv_truncate(), that means a
commit will fail if the overlay layer is larger than the base, due to
the backing blocker.
This is a regression in behavior from 2.0; currently, commit will try to
grow the size of the base image to match the overlay size, if the
overlay size is larger.
By moving this into the QMP command qmp_block_resize(), it allows
usage of bdrv_truncate() within block jobs.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It's always one since commit fa510eb dropped the last drive_get_ref().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"Init" and "uninit" suggest the functions don't allocate / free
storage. But they do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block_set_io_throttle QMP and HMP commands modify I/O throttling
limits for block devices.
Acquire the BlockDriverState's AioContext to protect against race
conditions with an IOThread that is running I/O for this device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bs_opts is leaked on all paths from its qdev_new() that don't got
through blockdev_init(). Add the missing QDECREF(), and zap bs_opts
after blockdev_init(), so the new QDECREF() does nothing when we go
through blockdev_init().
Leak introduced in commit f298d07. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when
the ID is bad. Missed in commit ec9c10d.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead). It uses both qerror_report() and
error_report(). Convert the former to the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP. It should not be used
elsewhere.
drive_init() is not meant to be used by QMP commands. It uses both
qerror_report_err() and error_report(). Convert the former to the
latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this adds a generic function to recover the enum id of a parameter
given as a string.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* remotes/qmp-unstable/queue/qmp:
monitor: fix qmp_getfd() fd leak in error case
HMP: support specifying dump format for dump-guest-memory
HMP: fix doc of dump-guest-memory
qmp: object-add: Validate class before creating object
monitor: Add device_add and device_del completion.
monitor: Add command_completion callback to mon_cmd_t.
monitor: Fix drive_del id argument type completion.
error: Remove some unused headers
qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
qerror.h: Remove QERR defines that are only used once
qerror.h: Remove unused error classes
error: Print error_report() to stderr if using qmp
monitor: Remove unused monitor_print_filename
error: Privatize error_print_loc
vnc: Remove default_mon usage
slirp: Remove default_mon usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in internal_snapshot_prepare() is merely
fragile, because the caller never passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.
This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
As speed is an optional parameter for the QMP block-commit command, it
should be set to 0 if not given (as it is undefined if has_speed is
false), that is, the speed should not be limited.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.
The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
John Snow
Fam Zheng
Alberto Garcia
Max Reitz
Stefan Hajnoczi
Eric Blake
Kevin Wolf
Wen Congyang
Paolo Bonzini
Markus Armbruster
Alexander Graf
Peter Maydell
Markus Armbruster
Jun Li
Peter Lieven
Jeff Cody
Benoît Canet
Wenchao Xia
Cole Robinson