Netbsd isn't able to detect a link on the emulated tulip card. That's
because netbsd reads the Chip Status Register of the Phy (address
0x14). The default phy data in the qemu tulip driver is all zero,
which means no link is established and autonegotation isn't complete.
Therefore set the register to 0x3b40, which means:
Link is up, Autonegotation complete, Full Duplex, 100MBit/s Link
speed.
Also clear the mask because this register is read only.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When converting to the shiny build-system-du-jour, a typo prevented the
last_i82596 driver from being built. Correct the config option name to
re-enable the build. And include "sysemu/sysemu.h" so it actually builds.
Fixes: b1419fa665 ("meson: convert hw/net")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2144
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
- Implementation of Transmit function for packets
- Implementation for reading and writing from and to descriptors in
memory for Tx
Added relevant trace-events
NOTE: This function implements the steps detailed in the datasheet for
transmitting messages from the GMAC.
Change-Id: Icf14f9fcc6cc7808a41acd872bca67c9832087e6
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-6-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Implementation of Receive function for packets
- Implementation for reading and writing from and to descriptors in
memory for Rx
When RX starts, we need to flush the queued packets so that they
can be received by the GMAC device. Without this it won't work
with TAP NIC device.
When RX descriptor list is full, it returns a DMA_STATUS for
software to handle it. But there's no way to indicate the software has
handled all RX descriptors and the whole pipeline stalls.
We do something similar to NPCM7XX EMC to handle this case.
1. Return packet size when RX descriptor is full, effectively dropping
these packets in such a case.
2. When software clears RX descriptor full bit, continue receiving
further packets by flushing QEMU packet queue.
Added relevant trace-events
Change-Id: I132aa254a94cda1a586aba2ea33bbfc74ecdb831
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-5-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the basic registers of GMAC device and sets
registers for networking functionalities.
Squashed IRQ Implementation patch into this one for compliation.
Tested:
The following message shows up with the change:
Broadcom BCM54612E stmmac-0:00: attached PHY driver [Broadcom BCM54612E] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
stmmaceth f0802000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Change-Id: If71c6d486b95edcccba109ba454870714d7e0940
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan Diaz <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HASH_REPORT is negotiated, the guest_hdr_len might be larger than
the size of the mergeable rx buffer header. Using
virtio_net_hdr_mrg_rxbuf during the header swap might lead a stack
overflow in this case. Fixing this by using virtio_net_hdr_v1_hash
instead.
Reported-by: Xiao Lei <leixiao.nop@zju.edu.cn>
Cc: Yuri Benditovich <yuri.benditovich@daynix.com>
Cc: qemu-stable@nongnu.org
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Fixes: CVE-2023-6693
Fixes: e22f0603fb ("virtio-net: reference implementation of hash report")
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122 ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per https://docs.xilinx.com/r/en-US/ug1085-zynq-ultrascale-trm/Message-Format
Message Format
The same message format is used for RXFIFO, TXFIFO, and TXHPB.
Each message includes four words (16 bytes). Software must read
and write all four words regardless of the actual number of data
bytes and valid fields in the message.
There is no mention in this reference manual about what the
hardware does when not all four words are read. To fix the
reported underflow behavior, I choose to fill the 4 frame data
registers when the first register (ID) is accessed, which is how
I expect hardware would do.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20231124183325.95392-3-philmd@linaro.org
Fixes: 98e5d7a2b7 ("hw/net/can: Introduce Xilinx ZynqMP CAN controller")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1427
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Per https://docs.xilinx.com/r/en-US/ug1085-zynq-ultrascale-trm/Message-Format
Message Format
The same message format is used for RXFIFO, TXFIFO, and TXHPB.
Each message includes four words (16 bytes). Software must read
and write all four words regardless of the actual number of data
bytes and valid fields in the message.
There is no mention in this reference manual about what the
hardware does when not all four words are written. To fix the
reported underflow behavior when DATA2 register is written,
I choose to fill the data with the previous content of the
ID / DLC / DATA1 registers, which is how I expect hardware
would do.
Note there is no hardware flag raised under such condition.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231124183325.95392-2-philmd@linaro.org
Fixes: 98e5d7a2b7 ("hw/net/can: Introduce Xilinx ZynqMP CAN controller")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1425
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixes: c755c943aa "hw/net/cadence_gem: use REG32 macro for register definitions"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Intel 82576EB GbE Controller say that the Physical and Virtual
Functions support Function Level Reset. Add the capability to the PF
device model using device property "x-pcie-flr-init" which is "on" by
default and "off" for machines <= 8.1 to preserve compatibility.
The FLR capability of the VF model is defined according to the FLR
property of the PF, this to avoid adding an extra compatibility
property.
Cc: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Export the igb_vf_reset() helper routine from the PF model to let the
IGBVF model implement its own device reset.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Suggested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows us to use Xen PV networking with emulated Xen guests, and to
add them on the command line or hotplug.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
The CRC was stored in an unsigned variable in gem_receive. Change it for
a uint32_t to ensure we have the correct variable size here.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-12-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MDIO access is done only on a write to the PHYMNTNC register. A
subsequent read is used to retrieve the result but does not trigger an
MDIO access by itself.
Refactor the PHY access logic to perform all accesses (MDIO reads and
writes) at PHYMNTNC write time.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-11-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the FIELD macro to describe the DESCONF6 register fields.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231017194422.4124691-9-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use de FIELD macro to describe the TXSTATUS and RXSTATUS register
fields.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-7-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace register defines with the REG32 macro from registerfields.h in
the Cadence GEM device.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-2-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
=Esj+
-----END PGP SIGNATURE-----
Merge tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Add emulation of a C3700 HP-PARISC workstation
This series adds a new PA-RISC machine emulation for the HP-PARISC
C3700 workstation.
The physical HP C3700 machine has a PA2.0 (64-bit) CPU, in contrast to
the existing emulation of a B160L workstation which is a 32-bit only
machine and where it's Dino PCI controller isn't 64-bit capable.
With the HP C3700 machine emulation (together with the emulated Astro
Memory controller and the Elroy PCI bridge) it's now possible to
enhance the hppa CPU emulation to support the 64-bit instruction set
in upcoming patches.
Helge
v4 changes:
- Fix testsuite error in astro by adding a realize() implementation
v3 changes:
based on feedback from BALATON Zoltan <balaton@eik.bme.hu>:
- apply paches in different order to bring them logically closer to each other
- update comments in lasips2
- rephrased title and commit message of MAINTAINERS patch
v2 changes:
suggestions by BALATON Zoltan <balaton@eik.bme.hu>:
- merged pci_ids and tulip patch
- dropped comments in lasips2
- mention additional cleanups in patch "Require at least SeaBIOS-hppa version 10"
suggestions by Philippe Mathieu-Daudé <philmd@linaro.org>:
- dropped static pci_bus variable
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZTGzDQAKCRD3ErUQojoP
# X9psAP0cHfTuJuXMiBWhrJhfp5VV0TURvaNXjCGyK8qvfbK+zgEArg3nvKhZPvnu
# jVSq6b/Ppf3eCAZIYSVIsfLITbElTQ4=
# =Esj+
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Oct 2023 15:51:57 PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'C3700-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Add new HP C3700 machine
hw/hppa: Split out machine creation
hw/hppa: Provide RTC and DebugOutputPort on CPU #0
hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
MAINTAINERS: Update HP-PARISC entries
pci-host: Wire up new Astro/Elroy PCI bridge
hw/pci-host: Add Astro system bus adapter found on PA-RISC machines
lasips2: LASI PS/2 devices are not user-createable
pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip
hw/hppa: Require at least SeaBIOS-hppa version 10
target/hppa: Update to SeaBIOS-hppa version 10
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass the callback function to add_migration_state_change_notifier so
that migration can initialize the notifier on add and clear it on
delete, which simplifies the call sites. Shorten the function names
so the extra arg can be added more legibly. Hide the global notifier
list in a new function migration_call_notifiers, and make it externally
visible so future live update code can call it.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1686148954-250144-1-git-send-email-steven.sistare@oracle.com>
Declare link statically using DEFINE_PROP_LINK().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231017140150.44995-7-philmd@linaro.org>
Rename the innermost local variables to avoid compiler warnings
with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004084939.96349-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
vhost-vdpa shadowed CVQ needs to know the maximum number of
vlans supported by the virtio-net device, so QEMU can restore
the VLAN state in a migration.
Co-developed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ca03403319c6405ea7c400836a572255bbc9ceba.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function is called after virtio_load, so all vlan configuration is
lost in migration case.
Just allow all the vlan-tagged packets if vlan is not configured, and
trust device reset to clear all filtered vlans.
Fixes: 0b1eaa8803 ("virtio-net: Do not filter VLANs without F_CTRL_VLAN")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <95af0d013281282f48ad3f47f6ad1ac4ca9e52eb.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace an on-stack variable length array in of_dpa_ig() with
a g_autofree heap allocation.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In fill_rx_bd() we create a variable length array of size
etsec->rx_padding. In fact we know that this will never be
larger than 64 bytes, because rx_padding is set in rx_init_frame()
in a way that ensures it is only that large. Use a fixed sized
array and assert that it is big enough.
Since padd[] is now potentially rather larger than the actual
padding required, adjust the memset() we do on it to match the
size that we write with cpu_physical_memory_write(), rather than
clearing the entire array.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename e1000e_ba_state according and e1000e_write_hdr_to_rx_buffers for
consistency with IGB.
Signed-off-by: Tomasz Dzieciol <t.dzieciol@partner.samsung.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
