Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-23-richard.henderson@linaro.org>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-21-richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-20-richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-19-richard.henderson@linaro.org>
vhost-scsi support for worker ioctls
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWKohIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpG2YH/1rJGV8TQm4V8kcGP9wOknPAMFADnEFdFmrB
V+JEDnyKrdcEZLPRh0b846peWRJhC13iL7Ks3VNjeVsfE9TyzNyNDpUzCJPfYFjR
3m8ChLDvE9tKBA5/hXMIcgDXaYcPIrPvHyl4HG8EQn7oaeMpS2uecKqDpDDvNXGq
oNamNvqimFSqA+3ChzA+0Qt07Ts7xFEw4OEXSwfRXlsam/dhQG0SI+crRheHuvFb
HR8EwmNydA1D/M51AuBNuvX36u3SnPWm7Anp5711SZ1b59unshI0ztIqIJnGkvYe
qpUJSmxR6ulwWe4nQfb+GhBsuJ2j2ORC7YfXyAT7mw8rds8loaI=
=cNy2
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-scsi support for worker ioctls
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWKohIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpG2YH/1rJGV8TQm4V8kcGP9wOknPAMFADnEFdFmrB
# V+JEDnyKrdcEZLPRh0b846peWRJhC13iL7Ks3VNjeVsfE9TyzNyNDpUzCJPfYFjR
# 3m8ChLDvE9tKBA5/hXMIcgDXaYcPIrPvHyl4HG8EQn7oaeMpS2uecKqDpDDvNXGq
# oNamNvqimFSqA+3ChzA+0Qt07Ts7xFEw4OEXSwfRXlsam/dhQG0SI+crRheHuvFb
# HR8EwmNydA1D/M51AuBNuvX36u3SnPWm7Anp5711SZ1b59unshI0ztIqIJnGkvYe
# qpUJSmxR6ulwWe4nQfb+GhBsuJ2j2ORC7YfXyAT7mw8rds8loaI=
# =cNy2
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Dec 2023 04:51:14 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (21 commits)
vdpa: move memory listener to vhost_vdpa_shared
vdpa: use dev_shared in vdpa_iommu
vdpa: use VhostVDPAShared in vdpa_dma_map and unmap
vdpa: move iommu_list to vhost_vdpa_shared
vdpa: remove msg type of vhost_vdpa
vdpa: move backend_cap to vhost_vdpa_shared
vdpa: move iotlb_batch_begin_sent to vhost_vdpa_shared
vdpa: move file descriptor to vhost_vdpa_shared
vdpa: use vdpa shared for tracing
vdpa: move shadow_data to vhost_vdpa_shared
vdpa: move iova_range to vhost_vdpa_shared
vdpa: move iova tree to the shared struct
vdpa: add VhostVDPAShared
vdpa: do not set virtio status bits if unneeded
Fix bugs when VM shutdown with virtio-gpu unplugged
vhost-scsi: fix usage of error_reportf_err()
hw/acpi: propagate vcpu hotplug after switch to modern interface
vhost-scsi: Add support for a worker thread per virtqueue
vhost: Add worker backend callouts
tests: bios-tables-test: Rename smbios type 4 related test functions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the memory listener to a common place rather than always in the
first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The memory listener functions can call these too. Make vdpa_iommu work
with VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callers only have the shared information by the end of this series.
Start converting this functions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iommu_list member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always VHOST_IOTLB_MSG_V2. We can always make it back per
vhost_dev if needed.
This change makes easier for vhost_vdpa_map and unmap not to depend on
vhost_vdpa but only in VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the backend_cap member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iotlb_batch_begin_sent member to VhostVDPAShared so all
vhost_vdpa can use it, rather than always in the first / last
vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the file descriptor to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By the end of this series dma_map and dma_unmap functions don't have the
vdpa device for tracing. Movinge trace function to shared member one.
Print it also in the vdpa initialization so log reader can relate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the shadow_data member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova range to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova tree to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next commits will set DRIVER and ACKNOWLEDGE flags repeatedly in the
case of a migration destination. Let's save ioctls with this.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231215172830.2540987-2-eperezma@redhat.com>
Virtio-gpu malloc memory for the queue when it realized, but the queues was not
released when it unrealized, which resulting in a memory leak. In addition,
vm_change_state_handler is not cleaned up, which is related to vdev and will
lead to segmentation fault when VM shutdown.
Signed-off-by: wangmeiling <wangmeiling21@huawei.com>
Signed-off-by: Binfeng Wu <wubinfeng@huawei.com>
Message-Id: <7bbbc0f3-2ad9-83ca-b39b-f976d0837daf@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is required to use error_report() instead of error_reportf_err(), if the
prior function does not take local_err as the argument. As a result, the
local_err is always NULL and segment fault may happen.
vhost_scsi_start()
-> vhost_scsi_set_endpoint(s) --> does not allocate local_err
-> error_reportf_err()
-> error_vprepend()
-> g_string_append(newmsg, (*errp)->msg) --> (*errp) is NULL
In addition, add ": " at the end of other error_reportf_err() logs.
Fixes: 7962e432b4 ("vhost-user-scsi: support reconnect to backend")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20231214003117.43960-1-dongli.zhang@oracle.com>
Reviewed-by: Feng Li <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a vcpu with an apic-id that is not supported by the legacy
interface (>255) is hot-plugged, the legacy code will dynamically switch
to the modern interface. However, the hotplug event is not forwarded to
the new interface resulting in the vcpu not being fully/properly added
to the machine config. This BUG is evidenced by OVMF when it
it attempts to count the vcpus and reports an inconsistent vcpu count
reported by the fw_cfg interface and the modern hotpug interface.
Fix is to propagate the hotplug event after making the switch from
the legacy interface to the modern interface.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Message-Id: <0e8a9baebbb29f2a6c87fd08e43dc2ac4019759a.1702398644.git.Aaron.Young@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for vhost-scsi to be able to create a worker thread
per virtqueue. Right now for vhost-net we get a worker thread per
tx/rx virtqueue pair which scales nicely as we add more virtqueues and
CPUs, but for scsi we get the single worker thread that's shared by all
virtqueues. When trying to send IO to more than 2 virtqueues the single
thread becomes a bottlneck.
This patch adds a new setting, worker_per_virtqueue, which can be set
to:
false: Existing behavior where we get the single worker thread.
true: Create a worker per IO virtqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-3-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This adds the vhost backend callouts for the worker ioctls added in the
6.4 linux kernel commit:
c1ecd8e95007 ("vhost: allow userspace to create workers")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-2-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the driver doesn't support interrupts, we must return early when
index is set to VIRTIO_CONFIG_IRQ_IDX. Basically the same thing Viresh
did for "91208dd297f2 virtio: i2c: Check notifier helpers for
VIRTIO_CONFIG_IRQ_IDX".
Fixes: 544f0278af ("virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20231025171841.3379663-1-mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These static memory regions are contained within the machine and do not need to
be dynamically allocated.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
These are now redundant with the scr2 and old_scr2 fields in NeXTPC. Rename
the function from nextscr2_write() to next_scr2_rtc_update() to better
reflect its purpose. At the same time replace the manual bit manipulation with
the extract32() and deposit32() functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Ensure that the LED status is updated by calling next_scr2_led_update() whenever
the SC2 register is written.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the old_scr2 variable to NeXTPC so that the old SCR2 register state is
stored along with the current SCR2 state.
Since the SCR2 register is 32-bits wide, convert old_scr2 to uint32_t and
update the SCR2 register access code to allow unaligned writes.
Note that this is a migration break, but as nothing will currently boot then
we do not need to worry about this now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The phase variable represents part of the state machine used to clock data out
of the NextRtc device.
Note that this is a migration break for the NeXTRtc struct, but as nothing will
currently boot then we simply bump the migration version for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The state of the led is stored in the SCR2 register which is part of the NeXTPC
device.
Note that this is a migration break for the NeXTPC device, but as nothing will
currently boot then we simply bump the migration version for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename dma_ops to next_dma_ops and the read/write functions to next_dma_read()
and next_dma_write() respectively, mark next_dma_ops as DEVICE_BIG_ENDIAN and
also improve the consistency of the val variable in next_dma_read() and
next_dma_write().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The old QEMU memory accessors used in the original NextCube patch series had
separate functions for 1, 2 and 4 byte accessors. When the series was finally
merged a simple wrapper function was written to dispatch the memory accesses
using the original functions.
Convert scr_ops to use the memory API directly renaming it to next_scr_ops,
marking it as DEVICE_BIG_ENDIAN, and handling any unaligned accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The old QEMU memory accessors used in the original NextCube patch series had
separate functions for 1, 2 and 4 byte accessors. When the series was finally
merged a simple wrapper function was written to dispatch the memory accesses
using the original functions.
Convert mmio_ops to use the memory API directly renaming it to next_mmio_ops,
marking it as DEVICE_BIG_ENDIAN, and handling any unaligned accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Normally a DMA FLUSH command is used to ensure that data is completely written
to the device and/or memory, so remove the pulse of the SCSI DMA IRQ if a DMA
FLUSH command is received. This enables the NeXT ROM monitor to start to load
from a SCSI disk.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a dummy register at address 0x6000 in the MMIO memory region to allow the
initial diagnostic test to timeout rather than getting stuck in a loop
continuously writing "en_write: tx not ready" to the console.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231220131641.592826-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add the iothread-vq-mapping parameter to assign virtqueues to IOThreads.
Store the vq:AioContext mapping in the new struct
VirtIOBlockDataPlane->vq_aio_context[] field and refactor the code to
use the per-vq AioContext instead of the BlockDriverState's AioContext.
Reimplement --device virtio-blk-pci,iothread= and non-IOThread mode by
assigning all virtqueues to the IOThread and main loop's AioContext in
vq_aio_context[], respectively.
The comment in struct VirtIOBlockDataPlane about EventNotifiers is
stale. Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-blk and virtio-scsi devices will need a way to specify the
mapping between IOThreads and virtqueues. At the moment all virtqueues
are assigned to a single IOThread or the main loop. This single thread
can be a CPU bottleneck, so it is necessary to allow finer-grained
assignment to spread the load.
Introduce DEFINE_PROP_IOTHREAD_VQ_MAPPING_LIST() so devices can take a
parameter that maps virtqueues to IOThreads. The command-line syntax for
this new property is as follows:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0","vqs":[0,1,2]},...]}'
IOThreads are specified by name and virtqueues are specified by 0-based
index.
It will be common to simply assign virtqueues round-robin across a set
of IOThreads. A convenient syntax that does not require specifying
individual virtqueue indices is available:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0"},{"iothread":"iothread1"},...]}'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdev_alias_all_properties() aliases a DeviceState's qdev properties onto
an Object. This is used for VirtioPCIProxy types so that --device
virtio-blk-pci has properties of its embedded --device virtio-blk-device
object.
Currently this function is implemented using qdev properties. Change the
function to use QOM object class properties instead. This works because
qdev properties create QOM object class properties, but it also catches
any QOM object class-only properties that have no qdev properties.
This change ensures that properties of devices are shown with --device
foo,\? even if they are QOM object class properties.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The SCSI subsystem no longer uses the AioContext lock. Request
processing runs exclusively in the BlockBackend's AioContext since
"scsi: only access SCSIDevice->requests from one thread" and hence the
lock is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-13-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The AioContext lock no longer has any effect. Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-9-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the removal of AioContext locking, the correctness of the code
relies on running requests from a single AioContext at any given time.
Add assertions that verify that callbacks are invoked in the correct
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231205182011.1976568-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Protect the Task Management Function BH state with a lock. The TMF BH
runs in the main loop thread. An IOThread might process a TMF at the
same time as the TMF BH is running. Therefore tmf_bh_list and tmf_bh
must be protected by a lock.
Run TMF request completion in the IOThread using aio_wait_bh_oneshot().
This avoids more locking to protect the virtqueue and SCSI layer state.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_aio_*() doesn't require the AioContext lock and the SCSI subsystem's
internal state also does not anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
