libseccomp supports s390x since version 2.3.0, and I was able to start
a VM with "-sandbox on" without any obvious problems by using this patch,
so it should be safe to allow --enable-seccomp on s390x nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1505385363-27717-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Like many other libraries, libseccomp cflags and libs should only apply
to the building of necessary objects. Do so in the usual way with the
help of per object variables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more. So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-2-kraxel@redhat.com
Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-3-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Nobody has mentioned AIX host support on the mailing list for years,
and we have no test systems for it so it is most likely broken.
We've advertised in configure for two releases now that we plan
to drop support for this host OS, and have had no complaints.
Drop the AIX host support code.
We can also drop the now-unused AIX version of sys_cache_info().
Note that the _CALL_AIX define used in the PPC tcg backend is
also used for Linux PPC64, and so that code should not be removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1504545540-8002-1-git-send-email-peter.maydell@linaro.org
We threatened to remove ia64 as host in v2.9.0. Its time has now come.
There are still some usages of defined(__ia64__) throughout the source
code that would be triggered if one were to enable TCI on an ia64 host.
Leave those alone for now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
KVM guests on s390 need a different page table layout than normal
processes (2kb page table + 2kb page status extensions vs 2kb page table
only). As of today this has to be enabled via the vm.allocate_pgste
sysctl.
Newer kernels (>= 4.12) on s390 check for an S390_PGSTE program header
and enable the pgste page table extensions in that case. This makes the
vm.allocate_pgste sysctl unnecessary. We enable this program header for
the s390 system emulation (qemu-system-s390x) if we build on s390
- for s390 system emulation
- the linker supports --s390-pgste (binutils >= 2.29)
- KVM is enabled
This will allow distributions to disable the global vm.allocate_pgste
sysctl, which will improve the page table allocation for non KVM
processes as only 2kb chunks are necessary.
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Dan Horak <dhorak@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503483383-199649-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Solaris 9 was released in 2002, its successor Solaris 10 was
released in 2005, and Solaris 9 was end-of-lifed in 2014.
Nobody has stepped forward to express interest in supporting
Solaris of any flavour, so removing support for the ancient
versions seems uncontroversial.
In particular, this allows us to remove a use of 'uname'
in configure that won't work if you're cross-compiling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
For a very long time we have used 'uname -s' as our fallback if
we don't identify the target OS using a compiler #define. This
obviously doesn't work for cross-compilation, and we've had
a comment suggesting we fix this in configure for a long time.
Since we now have an exhaustive list of which OSes we can run
on (thanks to commit 898be3e041 making an unrecognized OS
be a fatal error), we know which ones we're missing.
Add check_define tests for the remaining OSes we support. The
defines checked are based on ones we already use in the codebase for
identifying the host OS (with the exception of GNU/kFreeBSD).
We can now set bogus_os immediately rather than doing it later.
We leave the comment about uname being bad untouched, since
there is still a use of it for the fallback for unrecognized
host CPU type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AF_ALG socket family is the userspace interface for linux
crypto API, this patch adds af_alg family support and some common
functions for af_alg backend. It'll be used by afalg-backend crypto
latter.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Maintainer: modified to report an error if AF_ALG is requested
but cannot be supported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new call is trying to update a requested map cache entry
according to the changes in the physmap. The call is searching
for the entry, unmaps it and maps again at the same place using
a new guest address. If the mapping is dummy this call will
make it real.
This function makes use of a new xenforeignmemory_map2() call
with an extended interface that was recently introduced in
libxenforeignmemory [1].
[1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This warning is included in -Wall by clang, but not by GCC (which only
enables it for -Wextra). Include it in the list of warnings we enable
to minimize the differences between the compilers:
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While ARM could present the xenpv machine, it does not and trying to enable
it breaks compilation. Revert to the previous test which only looked at
$target_name, not $cpu.
Fixes: 3b6b75506d
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170711100049.20513-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our FORTIFY_SOURCE check assumes that $cxx refers to a working C++
compiler, with the result that if you don't happen to have one
then configure will spuriously print
configure: line 4685: c++: command not found
Fix this by adding a 'has $cxx' check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure script prefers pkg-config over sdl-config, but
the "--static-libs" parameter only exists for the latter. With
pkg-config, "--static --libs" have to be used instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/984516
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This lets you build without TCG (hardware accelerationor qtest only). When
this flag is passed to configure, it will automatically filter out the target
list to only those that support KVM or Xen or HAX.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for unsupported targets in target_list, and print an
error early in the configuration process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be useful when the functions are called, early in the configure
process, to filter out targets that do not support hardware acceleration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want the wide character functions from the ncurses header.
Unfortunately it doesn't provide them by default, but only
if either:
* NCURSES_WIDECHAR is defined (for ncurses 20111030 and up)
* _XOPEN_SOURCE/_XOPEN_SOURCE_EXTENDED are suitably defined
So far we have been implicitly relying on the latter, because
for GNU libc when we define _GNU_SOURCE this causes libc
to define the _XOPEN_SOURCE macros for us. Unfortunately
this doesn't work on all libcs, because some (like OSX and
musl libc) do not define _XOPEN_SOURCE when _GNU_SOURCE
is defined.
We can't fix this by defining _XOPEN_SOURCE ourselves, because
that also means "and don't provide any functions that aren't in
that standard", and not all libcs provide any way to override
that to also get the non-standard functions. In particular
FreeBSD has no such mechanism, and OSX's _DARWIN_C_SOURCE
doesn't reenable everything (for instance getpagesize()
is still not prototyped if _DARWIN_C_SOURCE and _XOPEN_SOURCE
are both defined).
So we have to define NCURSES_WIDECHAR. (This will only work
if your ncurses is at least 20111030, as older versions
don't honour this macro.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1496414138-7622-1-git-send-email-peter.maydell@linaro.org
This is for the future interoperability & management guide. It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move tcg-runtime.c, translate-all.(ch) and translate-common.c into
accel/tcg/ subdirectory and updated related trace-events file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the configure script finds both SDL 1.2 and SDL 2.x installed
it still prefers SDL 1.2. Prefer SDL 2.x instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-3-kraxel@redhat.com
In case the configure script finds both gtk2 and gtk3 installed it
still prefers gtk2 over gtk3. Prefer gtk3 instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-2-kraxel@redhat.com
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
modify the gdb_num_core_regs to fit the registers number defined in each
XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no possibility to add specific cxx flags using the configure
file. So A new entrance has been created to support it.
Duplication of information in configure and rules.mak. Taking
QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of
QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for
it.
The makefile for libvixl was adding flags for QEMU_CXXFLAGS in
QEMU_CFLAGS because of the addition in rules.mak. That was removed, so
adding them where it should be.
Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
file so GDB either loads qemu-gdb.py automatically or prints a message
informing the user how to enable them (some systems disable ./.gdbinit
loading for security reasons).
Symlink .gdbinit and the scripts directory in order to make out-of-tree
builds work. The scripts directory is used to find the qemu-gdb.py file
specified by a relative path in .gdbinit.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170517124042.1430-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have required a v9 cpu since 9b9c37c364.
However, the flags we were using did not reliably enable v8plus, which
meant that the compiler didn't know it could inline 64-bit atomics.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
NetBSD ships with traditional BSD curses with compatibility with ncurses.
qemu works nicely with the basesystem version of curses(3) from NetBSD.
The only mismatch between curses(3) and ncurses is the lack of
curses_version() in the NetBSD version. This function is used solely in
the configure script, therefore eliminate it from the curses(3) detection.
With this change applied, configure detects correctly curses frontend.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add missing support for "preallocation=falloc" to the Gluster block
driver. This change bases its logic on that of block/file-posix.c and
removed the gluster_supports_zerofill() and qemu_gluster_zerofill()
functions in favour of #ifdef checks in an easy to read
switch-statement.
Both glfs_zerofill() and glfs_fallocate() have been introduced with
GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the
availability of glfs_fallocate() has been added to ./configure.
Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Message-id: 20170528063114.28691-1-ndevos@redhat.com
URL: https://bugzilla.redhat.com/1450759
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).
Allow the large chunk of block migration code to be compiled
out for those who don't use it.
Based on a downstream-patch we've had for a while by Jeff Cody.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
- When compiled out, allow seting block only with false value (eric)
QEMU does not depends on libxencall, it was added because it was a
missing link dependency of libxendevicemodel, but now the later should
be built properly.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
I volunteer to review NetBSD patches.
Adding myself will help to not miss some of them.
Restore NetBSD as a maintained host.
All patches to make qemu/pkgsrc building have been emitted to review.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20170513022143.2838-1-n54@gmx.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=D0Hk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170511' into staging
ppc patch queue for 2017-05-11
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
# gpg: Signature made Thu 11 May 2017 05:13:46 AM BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.10-20170511: (23 commits)
target/ppc: Avoid printing wrong aliases in CPU help text
pnv: Fix build failures on some host platforms
target/ppc: Allow workarounds for POWER9 DD1
spapr: Don't accidentally advertise HTM support on POWER9
ppc: xics: fix compilation with CentOS 6
target/ppc: Enable RADIX mmu mode for pseries TCG guest
target/ppc: Implement ISA V3.00 radix page fault handler
target/ppc: Change tlbie invalid fields for POWER9 support
target/ppc: Update tlbie to check privilege level based on GTSE
target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for NewWorld Macs
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for OldWorld Macs
Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submodule
Add QemuMacDrivers as submodule
ppc/xics: preserve P and Q bits for KVM IRQs
ppc/xics: Fix stale irq->status bits after get
target/ppc: do not reset reserve_addr in exec_enter
tcg: enable MTTCG by default for PPC64 on x86
cpus: Fix CPU unplug for MTTCG
target/ppc: Generate fence operations
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This enables the multi-threaded system emulation by default for PPC64
guests using the x86_64 TCG back-end.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.
We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.
That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.
the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:
without _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
> struct { \
> ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’
> #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
> ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
with _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
> #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x)
> ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
Signed-off-by: Andreas Grapentin <andreas@grapentin.org>
Message-Id: <20170314165953.18506-1-andreas@grapentin.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
XML awareness for this architecture, modify the gdb_num_core_regs to
fit the registers number defined in each XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit "c53eeaf75a04 configure: eliminate Python dependency for
--help", configure --help fails to produce the list of available trace
backends if invoked out-of-tree. It also spits the following error:
grep: scripts/tracetool/backend/*.py: No such file or directory
This patch simply adds the missing $source_path to fix it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-id: 149321376763.7874.12797658801011614451.stgit@bahia
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A command that will list all currently logged in users, and the time
since when they are logged in.
Examples:
virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}
virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git
Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'
Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0
Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'
[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
Instead of trying to guess the Xen version to use by compiling various
test programs first just ask the system via pkg-config. Only if it
can't return the version fall back to the test program scheme.
If configure is being called with dedicated flags for the Xen libraries
use those instead of the pkg-config output. This will avoid breaking
an in-tree Xen build of an old Xen version while a new Xen version is
installed on the build machine: pkg-config would pick up the installed
Xen config files as the Xen tree wouldn't contain any of them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.
Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION
to a new value of 490 if libxendevicemodel is present in the build
environment.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The ./configure script should produce --help output even if Python is
not installed.
Listing trace backends is simple: show the names of all Python modules
in scripts/tracetool/backend/ whose source code contains 'PUBLIC =
True'.
Perform the backend enumeration in shell instead of Python so that we
can move the Python check until after ./configure --help.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170328134418.3426-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the 2.7 release we stated in the ChangeLog that the
minimum glib version for Windows hosts was 2.30, but we
didn't update configure to enforce this because we were
very close to the release at the point where we noticed
the issue, and it only affected building the test suite.
We then forgot that we needed to do it. Fix the omission.
(The reason for the 2.30 requirement is use of
g_dir_make_tmp() -- our fallback implementation uses
mkdtemp(), which isn't available on Windows.)
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1491224655-5776-1-git-send-email-peter.maydell@linaro.org
Thanks to John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
and the Debian Project, we now have access to a SPARC Linux
system we can use for build testing. Move SPARC back into
the "supported" list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490698718-23762-1-git-send-email-peter.maydell@linaro.org
Attempting to compile qemu-ga statically as follows for Windows causes
the following error:
Compilation:
./configure --disable-docs --target-list=x86_64-softmmu \
--cross-prefix=x86_64-w64-mingw32- --static \
--enable-guest-agent-msi --with-vss-sdk=/path/to/VSSSDK72
make -j8 qemu-ga
Error:
path/to/qemu/stubs/error-printf.c:7: undefined reference to `__imp_g_test_config_vars'
collect2: error: ld returned 1 exit status
Makefile:444: recipe for target 'qemu-ga.exe' failed
make: *** [qemu-ga.exe] Error 1
This is caused by a bug in the pkg-config file for glib as it doesn't define
GLIB_STATIC_COMPILATION for pkg-config --static.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The change in commit 898be3e041 which made completely
unrecognized OSes cause an error_exit "Unsupported host OS"
has some unfortunate unintended effects:
* if you run 'configure --help' on an unsupported host OS
(eg if intending to use it as a build machine for a
cross compile to a supported host) then the message
is printed instead of --help
* if the C compiler doesn't work or is missing (eg if
you passed an incorrect --cross-prefix by mistake)
the message is printed instead of the more useful
'compiler does not exist or does not work' message
Fix this by postponing the error_exit in this situation
until later, when we have already identified the more
useful cases for this.
The long term fix for this would be to move handling
of --help much further up in the configure script,
and make its output not dependent on checks that configure
runs. However for 2.9 this would be too invasive.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Fix some cut-and-paste errors in the OS deprecation warning
pointed out by Thomas Huth.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1490119729-26206-1-git-send-email-peter.maydell@linaro.org
We plan to drop support in a future QEMU release for host OSes
and host architectures for which we have no test machine where
we can build and run tests. For the 2.9 release, make configure
print a warning if it is run on such a host, so that the user
has some warning of the plans and can volunteer to help us
maintain the port if they need it to continue to function.
This commit flags up as deprecated the CPU architectures:
* ia64
* sparc
* anything which we don't have a TCG port for
(and which was presumably using TCI)
and the OSes:
* GNU/kFreeBSD
* DragonFly BSD
* NetBSD
* OpenBSD
* Solaris
* AIX
* Haiku
It also makes entirely unrecognized host OS strings be
rejected rather than treated as if they were Linux (which
likely never worked).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490106717-9542-1-git-send-email-peter.maydell@linaro.org
... and drop OPENGL_CFLAGS from Makefiles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sdl is probed before audio, so we can simply look at $sdl so see
whenever we have support or not. Throw an error in case sdl audio
is requested without sdl being available.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490000743-3615-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cygwin target is really compiling for native Win32 with -mno-cygwin.
Except, GCC 4.7.0 has finally removed the long deprecated -mno-cygwin
option, and that happened about five years ago.
Let it rest in peace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20170317160811.28370-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of the major() and minor() macros are moving within glibc to
<sys/sysmacros.h>. Include this header when it is available to avoid the
following sorts of build-stopping messages:
qga/commands-posix.c: In function ‘dev_major_minor’:
qga/commands-posix.c:656:13: error: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>. [-Werror]
*devmajor = major(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
qga/commands-posix.c:657:13: error: In the GNU C Library, "minor" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "minor", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"minor", you should undefine it after including <sys/types.h>. [-Werror]
*devminor = minor(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
The additional include allows the build to complete on Fedora 26 (Rawhide)
with glibc version 2.24.90.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=xOs6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into staging
MIPS patches 2017-02-24-2
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
# gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170224-2:
hw/mips: MIPS Boston board support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly.
changed default memory size into 1G due to make check failure
on 32-bit hosts]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:
- The ARM translate.c/translate-64.c have been converted to
- use MTTCG safe atomic primitives
- emit the appropriate barrier ops
- The ARM machine has been updated to
- hold the BQL when modifying shared cross-vCPU state
- defer powerctl changes to async safe work
All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This reverts commit d3473e147a.
This commit creates a board which defaults to having 2GB of RAM.
Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM,
and so 'make check' fails. I missed this during testing of the
merge, unfortunately. Luckily the offending commit is the last
one in the merge request, so we can just revert it for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In order to obtain fdt_first_subnode & fdt_next_subnode symbols from
libfdt for use by a later patch, bump the requirement for dtc to v1.4.2
& the submodule to that same version.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In
commit ba78db44f6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 25 16:14:10 2017 +0000
make: move top level dir to end of include search path
The dir $(BUILD_DIR)/$(@D) was added to the include
path. This would sometimes point to a non-existant
directory, if the sub-dir in question did not contain
any target-independant files (eg tcg/). To deal with
this the rules.mak attempted to create the directory.
While this was succesful, it also caused accidental
creation of files in the parent of the build dir.
e.g. when building common source files into target
specific output files.
Rather than trying to workaround this, just revert
the code that attempted to mkdir the missing include
directories. Instead just turn off the compiler warning
in question as the missing dir is expected & harmless
in general.
NB: you can clean up a build directory parent that has
been filled with empty directories by commit ba78db44f6
using this GNU find command in that parent directory:
find audio backends block chardev crypto disas fsdev hw io linux-user \
migration nbd net qapi qom replay slirp target ui util \
-type d -empty -delete
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
[PMM: added note about how to clean up a polluted directory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add remaining bits of the Altera NiosII R1 support into qemu, which
is documentation, MAINTAINERS file entry, configure bits, arch_init
and configuration files for both linux-user (userland binaries) and
softmmu (hardware emulation).
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-8-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is just about the minimum required to enable compilation
without actually executing any instructions. This contains the
HPPACPU structure and the required callbacks, the gdbstub, the
basic translation loop, and a translate_one function that always
results in an illegal instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reverts commit 7ad9339e37.
The error "Failed to execute helper program (No such file or directory)"
is due to broken glib installation, missing windows gspawn helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170104205722.26492-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generate and install the man, txt and html versions of QAPI
documentation (generate and install qemu-doc.txt too).
Add it also to optional pdf/info targets.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* rules.mak speedup and cleanups from myself and Marc-Adnré
* multiboot command line fix from Vlad
* SCSI fixes from myself
* small qemu-timer speedup from myself
* x86 debugging improvements from Doug
* configurable Q35 devices from Chao
* x86 5-level paging support from Kirill
* x86 SHA_NI support for KVM from Yi Sun
* improved kvmclock migration logic from Marcelo
* bugfixes and doc fixes from others
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYW+q5FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
H7cH/i5SpYY96aMGqK/QOIL9GfLPOeNayUFyf4Mnt/9B/85l9vAIf8uVARDpO7Mw
AiVZcdIj/PAFJ5jrLWA8qvBBaWS69Cfq1/hQfsWWlG3FcXU1Lzc/I76d8pAZC+9P
BZ/YWX3ZO6aOcT7XqzsBINoofyyjwUFNeYaoWwrUsWJVFG3987cbIMmnNp9pqxhZ
4pcMpycnWQJULP+P+AT6YjJaX7G017bXlrsc+iDh1dBe3Ah/Lp0Wy73YahAI5Dq2
3MT8bECjSIRQuT5xCyAsfN3latUVoAZrkJH3dApqg5RbqKWIkdpfQ0gIbGX8l3P5
DU5NRQcTujCPl8VdsNnrr796HV0=
=VhCX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* core support for MemoryRegionCache from myself
* rules.mak speedup and cleanups from myself and Marc-Adnré
* multiboot command line fix from Vlad
* SCSI fixes from myself
* small qemu-timer speedup from myself
* x86 debugging improvements from Doug
* configurable Q35 devices from Chao
* x86 5-level paging support from Kirill
* x86 SHA_NI support for KVM from Yi Sun
* improved kvmclock migration logic from Marcelo
* bugfixes and doc fixes from others
# gpg: Signature made Thu 22 Dec 2016 15:01:13 GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (25 commits)
x86: implement la57 paging mode
target-i386: Fix eflags.TF/#DB handling of syscall/sysret insns
kvmclock: reduce kvmclock difference on migration
kvm: sync linux headers
scsi-disk: fix VERIFY for scsi-block
hw/block/pflash_cfi*.c: fix confusing assert fail message
multiboot: copy the cmdline verbatim, unescape module strings
x86: Fix x86_64 'g' packet response to gdb from 32-bit mode.
pc: make pit configurable
pc: make sata configurable
pc: make smbus configurable
target-i386: Add Intel SHA_NI instruction support.
block: drop remaining legacy aio functions in comment
main-loop: update comment for qemu_mutex_lock/unlock_iothread
timer: fix misleading comment in timer.h
qemu-timer: check active_timers outside lock/event
virtio-scsi: introduce virtio_scsi_acquire/release
build-sys: remove libtool left-over
rules.mak: add more rules to avoid chaining
rules.mak: speedup save-vars load-vars
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was removed in commit e999ee4434, there is a few
left-over.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This item will be used for support libcrypt-backed HMAC algorithms.
Support for hmac has been added in Libgcrypt 1.6.0, but we cannot
use pkg-config to get libcrypt's version. However we can make a
in configure to know whether current libcrypt support hmac.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:
/usr/bin/ld: -r and -pie may not be used together
You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed. However, clang
does not know about -r, so try -Wl,-r first.
[This is a fix for commit c96f0ee6a6
("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is
default") which mostly worked but broke the ./configure --enable-modules
build with clang.
--Stefan]
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129153720.29747-1-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The detection program needs to be linked with -ldl to build succesfully
with recent versions of LTTng-UST.
We also need to add -ldl to the libs required to build the LTTng-UST
backend (lttng_ust_libs).
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Message-id: 1480348337-24271-1-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include sys/user.h for declaration of 'struct kinfo_proc'.
Add -lutil to qemu-ga link for kinfo_getproc.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1479778365-11315-1-git-send-email-emaste@freebsd.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On systems which do not provide ncursesw.pc and whose /usr/include/curses.h
does not include wide support, we should not only try with no -I, i.e.
/usr/include, but also with -I/usr/include/ncursesw.
To properly detect for wide support with and without -Werror, we need to
check for the presence of e.g. the WACS_DEGREE macro.
We also want to stop at the first curses_inc_list configuration which works,
and make sure to set IFS to : at each new loop.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 20161109102752.13255-1-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the AF_VSOCK address family so that qemu-ga will be able to use
virtio-vsock.
The AF_VSOCK address family uses <cid, port> address tuples. The cid is
the unique identifier comparable to an IP address. AF_VSOCK does not
use name resolution so it's easy to convert between struct sockaddr_vm
and strings.
This patch defines a VsockSocketAddress instead of trying to piggy-back
on InetSocketAddress. This is cleaner in the long run since it avoids
lots of IPv4 vs IPv6 vs vsock special casing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* treat trailing commas as garbage when parsing (Eric Blake)
* add configure check instead of checking AF_VSOCK directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Use ncursesw package instead of curses on non-mingw, and check a few
functions.
Also take cflags from pkg-config, since cursesw headers may be in a
separate, non-default directory.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161015195308.20473-3-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When configured to compile out of tree, the configure script
copies BIOS blobs to the build directory. However since the PPC64 powernv
machine ROM has .lid extension, it is ignored and "make check" fails
when trying the powernv machine.
This adds *.lid to the list of copied blobs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow qemu to build on 32-bit hosts without 64-bit atomic ops.
Even if we only allow 32-bit hosts to multi-thread emulate 32-bit
guests, we still need some way to handle the 32-bit guest using a
64-bit atomic operation. Do so by dropping back to single-step.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Force the use of cmpxchg16b on x86_64.
Wikipedia suggests that only very old AMD64 (circa 2004) did not have
this instruction. Further, it's required by Windows 8 so no new cpus
will ever omit it.
If we truely care about these, then we could check this at startup time
and then avoid executing paths that use it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch implements Qemu user mode syncfs() syscall support. Syscall
syncfs() syncs the filesystem containing file determined by the open
file descriptor passed as the argument to syncfs().
The implementation consists of a straightforward invocation of host's
syncfs(). Configure and strace support is included as well.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode clock_adjtime() syscall support.
The implementation is based on invocation of host's clock_adjtime().
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
C99 requires SIZE_MAX to be declared with the same type as the
integral promotion of size_t, but OSX mistakenly defines it as
an 'unsigned long long' expression even though size_t is only
'unsigned long'. Rather than futzing around with whether size_t
is 32- or 64-bits wide (which would be needed if we cared about
using SIZE_T in a #if expression), just hard-code it with a cast.
This is not a strict C99-compliant definition, because it doesn't
work in the preprocessor, but if we later need that, the build
will break on Mac to inform us to improve our replacement at that
time.
See also https://patchwork.ozlabs.org/patch/542327/ for an
instance where the wrong type trips us up if we don't fix it
for good in osdep.h.
Some versions of glibc make a similar mistake with SSIZE_MAX; the
goal is that the approach of this patch could be copied to work
around that problem if it ever becomes important to us.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1476200784-17210-1-git-send-email-eblake@redhat.com
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
this adds a knob to track the maximum stack usage of stacks
created by qemu_alloc_stack.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Copy data operated on during request from/to local buffers to/from
the grant references.
Before grant copy operation local buffers must be allocated what is
done by calling ioreq_init_copy_buffers. For the 'read' operation,
first, the qemu device invokes the read operation on local buffers
and on the completion grant copy is called and buffers are freed.
For the 'write' operation grant copy is performed before invoking
write by qemu device.
A new value 'feature_grant_copy' is added to recognize when the
grant copy operation is supported by a guest.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
This way, overriding CFLAGS on make command line keeps glib-cflags
and doesn't break the build.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160925205748.6280-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All code now uses built-in UUID implementation. Remove the code of
libuuid and make --enable-uuid and --disable-uuid only print a message.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-9-git-send-email-famz@redhat.com>
This removes our dependency to libuuid, so that the driver can always be
built.
Similar to how we handled data plane configure options, --enable-vhdx
and --disable-vhdx are also changed to a nop with a message saying it's
obsolete.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-4-git-send-email-famz@redhat.com>
Modularizes the nfs block driver so that it gets dynamically loaded.
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-5-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On Tue, Jun 14, 2016 at 04:44:57PM +0100, Daniel P. Berrange wrote:
> The g_test_trap_subprocess() method does not work on the
> Mingw32 platform, causing the test-qdev-global-props
> test case to abort
>
> (test-logging.exe:230): GLib-ERROR **: g_test_trap_subprocess()
> failed: Failed to execute helper program (No such file or directory)
>
> This failure was introduced a while ago in
>
> commit 2177801a48
> Author: Eduardo Habkost <ehabkost@redhat.com>
> Date: Fri Aug 8 16:03:27 2014 -0300
>
> test-qdev-global-props: Run tests on subprocess
>
> Modify the configure time check to avoid enabling this feature
> on Mingw, rather than trying to rewrite the test to avoid this
> feature.
I would do the following instead, just in case we have extra code
looking at $glib_subprocess one day.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The HPPA backend has been removed by the following commit:
802b508123
tcg-hppa: Remove tcg backend
But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow selection of several acceleration functions
based on the size and alignment of the buffer.
Do not require ifunc support for AVX2 acceleration.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-5-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's code relies on left shifts of signed integers always
being defined behaviour with the obvious 2s-complement
semantics. The only way to tell the compiler (and any
associated undefined-behaviour sanitizer) that we require a
C dialect with these semantics is to use the -fwrapv option.
This is a bit of a heavy hammer for the job as it also gives
us guaranteed semantics on integer arithmetic overflow which
in theory we don't require.
In an ideal world this would allow us to drop the warning
flag -Wno-shift-negative-value, but we must retain this to
avoid spurious warnings on clang versions predating the
fix to https://llvm.org/bugs/show_bug.cgi?id=25552.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473685808-9629-1-git-send-email-peter.maydell@linaro.org
configure --(enable/disable)-replication to switch replication
support on/off, and it is on by default.
We later introduce replation support.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Message-id: 1469602913-20979-8-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a tracing backend which sends output using syslog().
The syslog backend is limited to POSIX compliant systems.
openlog() is called with facility set to LOG_DAEMON, with the LOG_PID
option. Trace events are logged at level LOG_INFO.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Message-id: 1470318254-29989-1-git-send-email-paul.durrant@citrix.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The various host OSes are irritatingly variable about the name
of the linker emulation we need to pass to ld's -m option to
build the i386 option ROMs. Instead of doing this via a
CONFIG ifdef, check in configure whether any of the emulation
names we know about will work and pass the right answer through
to the makefile. If we can't find one, we fall back to not trying
to build the option ROMs, in the same way we would for a non-x86
host platform.
This is in particular necessary to unbreak the build on OpenBSD,
since it wants a different answer to FreeBSD and we don't have
an existing CONFIG_ variable that distinguishes the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1470672688-6754-1-git-send-email-peter.maydell@linaro.org
It seems like there's no good reason for the compiler to exploit the
undefinedness of left shifts. GCC explicitly documents that they do not
use at all this possibility and, while they also say this is subject
to change, they have been saying this for 10 years (since the wording
appeared in the GCC 4.0 manual).
Disable these warnings by passing in -Wno-shift-negative-value.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: forward-port part of patch to 2.7]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
This avoids a segfault like the following for at least some 4.8 versions
of gcc when configured with --static if avx2 instructions are also
enabled:
Program received signal SIGSEGV, Segmentation fault.
buffer_find_nonzero_offset_ifunc () at ./util/cutils.c:333
333 {
(gdb) bt
#0 buffer_find_nonzero_offset_ifunc () at ./util/cutils.c:333
#1 0x0000000000939c58 in __libc_start_main ()
#2 0x0000000000419337 in _start ()
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately
for cases where we enable VSS support in qemu-ga, we still have
warnings generated by VSS includes that ship as part of the Microsoft
VSS SDK.
We can selectively address a number of these warnings using
#pragma GCC diagnostic ignored ...
but at least one of these:
warning: ‘typedef’ was ignored in this declaration
resulting from declarations of the form:
typedef struct Blah { ... };
does not provide a specific command-line/pragma option to disable
warnings of the sort.
To allow VSS builds to succeed, the next-best option is disabling
these warnings on a per-file basis. pragmas like #pragma GCC
system_header can be used to declare subsequent includes/declarations
as being exempt from normal warnings, but this must be done within
a header file.
Since we don't control the VSS SDK, we'd need to rely on a
intermediate header include to accomplish this, and
since different objects in the VSS link target rely on different
headers from the VSS SDK, this would become somewhat of a rat's nest
(though not totally unmanageable).
The next step up in granularity is just marking the entire VSS
SDK include path as system headers via -isystem. This is a bit more
heavy-handed, but since this SDK hasn't changed since 2005, there's
likely little to be gained from selectively disabling warnings
anyway, so we implement that approach here.
This fixes the -Werror failures in both the configure test and the
qga build due to shared reliance on $vss_win32_include. For the
same reason, this also enforces a new dependency on -isystem support
in the C/C++ compiler when building QGA with VSS enabled.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Link a common tests data directory to the build directory.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This introduces a moderately general purpose framework for
testing performance of migration.
The initial guest workload is provided by the included 'stress'
program, which is configured to spawn one thread per guest CPU
and run a maximally memory intensive workload. It will loop
over GB of memory, xor'ing each byte with data from a 4k array
of random bytes. This ensures heavy read and write load across
all of guest memory to stress the migration performance. While
running the 'stress' program will record how long it takes to
xor each GB of memory and print this data for later reporting.
The test engine will spawn a pair of QEMU processes, either on
the same host, or with the target on a remote host via ssh,
using the host kernel and a custom initrd built with 'stress'
as the /init binary. Kernel command line args are set to ensure
a fast kernel boot time (< 1 second) between launching QEMU and
the stress program starting execution.
None the less, the test engine will initially wait N seconds for
the guest workload to stablize, before starting the migration
operation. When migration is running, the engine will use pause,
post-copy, autoconverge, xbzrle compression and multithread
compression features, as well as downtime & bandwidth tuning
to encourage completion. If migration completes, the test engine
will wait N seconds again for the guest workooad to stablize on
the target host. If migration does not complete after a preset
number of iterations, it will be aborted.
While the QEMU process is running on the source host, the test
engine will sample the host CPU usage of QEMU as a whole, and
each vCPU thread. While migration is running, it will record
all the stats reported by 'query-migration'. Finally, it will
capture the output of the stress program running in the guest.
All the data produced from a single test execution is recorded
in a structured JSON file. A separate program is then able to
create interactive charts using the "plotly" python + javascript
libraries, showing the characteristics of the migration.
The data output provides visualization of the effect on guest
vCPU workloads from the migration process, the corresponding
vCPU utilization on the host, and the overall CPU hit from
QEMU on the host. This is correlated from statistics from the
migration process, such as downtime, vCPU throttling and iteration
number.
While the tests can be run individually with arbitrary parameters,
there is also a facility for producing batch reports for a number
of pre-defined scenarios / comparisons, in order to be able to
get standardized results across different hardware configurations
(eg TCP vs RDMA, or comparing different VCPU counts / memory
sizes, etc).
To use this, first you must build the initrd image
$ make tests/migration/initrd-stress.img
To run a a one-shot test with all default parameters
$ ./tests/migration/guestperf.py > result.json
This has many command line args for varying its behaviour.
For example, to increase the RAM size and CPU count and
bind it to specific host NUMA nodes
$ ./tests/migration/guestperf.py \
--mem 4 --cpus 2 \
--src-mem-bind 0 --src-cpu-bind 0,1 \
--dst-mem-bind 1 --dst-cpu-bind 2,3 \
> result.json
Using mem + cpu binding is strongly recommended on NUMA
machines, otherwise the guest performance results will
vary wildly between runs of the test due to lucky/unlucky
NUMA placement, making sensible data analysis impossible.
To make it run across separate hosts:
$ ./tests/migration/guestperf.py \
--dst-host somehostname > result.json
To request that post-copy is enabled, with switchover
after 5 iterations
$ ./tests/migration/guestperf.py \
--post-copy --post-copy-iters 5 > result.json
Once a result.json file is created, a graph of the data
can be generated, showing guest workload performance per
thread and the migration iteration points:
$ ./tests/migration/guestperf-plot.py --output result.html \
--migration-iters --split-guest-cpu result.json
To further include host vCPU utilization and overall QEMU
utilization
$ ./tests/migration/guestperf-plot.py --output result.html \
--migration-iters --split-guest-cpu \
--qemu-cpu --vcpu-cpu result.json
NB, the 'guestperf-plot.py' command requires that you have
the plotly python library installed. eg you must do
$ pip install --user plotly
Viewing the result.html file requires that you have the
plotly.min.js file in the same directory as the HTML
output. This js file is installed as part of the plotly
python library, so can be found in
$HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js
The guestperf-plot.py program can accept multiple json files
to plot, enabling results from different configurations to
be compared.
Finally, to run the entire standardized set of comparisons
$ ./tests/migration/guestperf-batch.py \
--dst-host somehost \
--mem 4 --cpus 2 \
--src-mem-bind 0 --src-cpu-bind 0,1 \
--dst-mem-bind 1 --dst-cpu-bind 2,3
--output tcp-somehost-4gb-2cpu
will store JSON files from all scenarios in the directory
named tcp-somehost-4gb-2cpu
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
For clang before 3.5, -fno-integrated-as does not exist,
so the workaround in 5f6f0e27fb fails to build.
Use clang's default assembler for linux-user/safe-syscall.S,
and explicitly change to use the system assembler for the
option roms.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We fail to pass to $(AS) all of the different flags that may be required
for a given set of CFLAGS. Rather than figuring out the host-specific
mapping, it's better to allow the compiler driver to do that.
However, simply using $(CC) runs afoul of clang trying to build the
option roms. C.f. 3dd46c7852, wherein we changed from
using $(CC) to using $(AS) in the first place.
Work around this by passing -fno-integrated-as to clang, so that we use
the external assembler, and the clang driver still passes along all of
the options that the assembler might require.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1466703558-7723-1-git-send-email-rth@twiddle.net>
Modern gnutls can use a global config file to control the
crypto priority settings for TLS connections. For example
the priority string "@SYSTEM" instructs gnutls to find the
priority setting named "SYSTEM" in the global config file.
Latest gnutls GIT codebase gained the ability to reference
multiple priority strings in the config file, with the first
one that is found to existing winning. This means it is now
possible to configure QEMU out of the box with a default
priority of "@QEMU,SYSTEM", which says to look for the
settings "QEMU" first, and if not found, use the "SYSTEM"
settings.
To make use of this facility, we introduce the ability to
set the QEMU default priority at build time via a new
configure argument. It is anticipated that distro vendors
will set this when building QEMU to a suitable value for
use with distro crypto policy setup. eg current Fedora
would run
./configure --tls-priority=@SYSTEM
while future Fedora would run
./configure --tls-priority=@QEMU,SYSTEM
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the internal hash code is using the gnutls hash APIs.
GNUTLS in turn is wrapping either nettle or gcrypt. Not only
were the GNUTLS hash APIs not added until GNUTLS 2.9.10, but
they don't expose support for all the algorithms QEMU needs
to use with LUKS.
Address this by directly wrapping nettle/gcrypt in QEMU and
avoiding GNUTLS's extra layer of indirection. This gives us
support for hash functions on a much wider range of platforms
and opens up ability to support more hash functions. It also
avoids a GNUTLS bug which would not correctly handle hashing
of large data blocks if int != size_t.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zonM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160628' into staging
Drop building linux-user targets on HPPA or m68k host systems
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
# gpg: Signature made Tue 28 Jun 2016 19:31:16 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160628: (24 commits)
linux-user: Provide safe_syscall for ppc64
linux-user: Provide safe_syscall for s390x
linux-user: Provide safe_syscall for aarch64
linux-user: Provide safe_syscall for arm
linux-user: Provide safe_syscall for i386
linux-user: fix x86_64 safe_syscall
linux-user: don't swap NLMSG_DATA() fields
linux-user: fd_trans_host_to_target_data() must process only received data
linux-user: add missing return in netlink switch statement
linux-user: update get_thread_area/set_thread_area strace
linux-user: fix clone() strace
linux-user: add socket() strace
linux-user: add socketcall() strace
linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
linux-user: Fix wrong type used for argument to rt_sigqueueinfo
linux-user: Create a hostdep.h for each host architecture
user-exec: Remove unused code for OSX hosts
user-exec: Delete now-unused hppa and m68k cpu_signal_handler() code
configure: Don't allow user-only targets for unknown CPU architectures
configure: Don't override ARCH=unknown if enabling TCI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AVX2 optimization test assumes that the object format
is ELF and the system has the readelf utility. If this isn't
true then configure might fail or emit a warning (since in
a pipe "foo | bar >/dev/null 2>&1" does not redirect the
stderr of foo, only of bar). Adjust the check so that if
we don't have readelf or don't have an ELF object then we
just don't enable the AVX2 optimization.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-3-git-send-email-pmaydell@chiark.greenend.org.uk
The probe we do to determine what flags to use to make the usermode
executables use a non-default text address has some flaws:
* we run it even if we're not building the user binaries
* we don't expect "ld --verbose" to fail
The combination of these two results in a harmless but
ugly "ld: unknown option: --verbose" message when running
configure on OSX.
Improve the probe to only run when we need it and to fail
nicely when even the backstop 'ld --verbose' approach fails.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-2-git-send-email-pmaydell@chiark.greenend.org.uk
For the user-only targets, we need to know something about the host CPU
architecture even if we are using the TCI interpreter rather than TCG.
(In particular user-exec.c has code for handling signals that needs
to know about that host's context structures.)
Specifically forbid building the user-only targets on unknown CPU
architectures, rather than allowing them to configure but then fail
when building user-exec.c.
This change drops supports for two configurations which were theoretically
possible before:
* linux-user targets on M68K hosts using TCI
* linux-user targets on HPPA hosts using TCI
We don't think anybody is actually trying to use these in practice, though:
* interpreted TCG on a slow host CPU would be unusably slow
* the m68k user-exec.c support is missing is_write detection so guest
code which writes to the same page it is executing from was broken
(will include any guest program using signals)
* HPPA TCG backend support was dropped two and a half years ago
with no complaints
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
At the moment if configure finds an unknown CPU it will set
ARCH to 'unknown', and then later either bail out or set it
to 'tci' (depending on whether the user passed configure the
--enable-tcg-interpreter switch). This is unnecessarily
confusing, because we could be using TCI in two cases:
* a known host architecture (in which case ARCH is set to
the actual host architecture, like 'i386')
* an unknown host architecture (in which case ARCH is
set to 'tci')
so nothing can rely on ARCH=tci to mean "using TCI".
Remove the line setting ARCH, so we leave it as "unknown",
which is what the actual situation is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Support for ppc/ppc64 is official in libseccomp 2.3.0, so modify the
configuration script to allow qemuu to enable seccomp for those platforms.
Signed-off-by: Michael Strosaker <strosake@linux.vnet.ibm.com>
The CONFIG_SIGEV_THREAD_ID switch is unused since the related code
has been removed by commit 6d32717155
("aio / timers: Remove alarm timers"), so it can safely be removed
nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465571084-19885-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the avx2 primitives during the test, thus making sure that the
compiler and assembler could actually use avx2.
This also detects the failure case on gcc 4.8.x with -save-temps
and avoids the need for the gcc version check in cutils.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When configured with --extra-cflags=-O2 gcc optimised out the test
and the readelf failed the check leaving avx2 disabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MinGW seems to compile currently without warnings, so it should
be safe to enable -Werror now for this environment, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465373606-18486-1-git-send-email-thuth@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_ZERO_MALLOC was only used in qemu-malloc.c and
this file has been removed with the following commit:
41a748265f
Remove qemu_malloc/qemu_free
So we don't need this configuration setting anymore.
This patch also removes the z_version variable, since
this is now also not needed anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <1465398683-3152-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.
Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On my Debian jessie system, including nettle/pbkdf2.h does not cause
NULL to be defined, which causes the test to fail to compile. Include
stddef.h to bring in a definition of NULL.
Cc: qemu-trivial@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes these warnings from shellcheck:
^-- SC2006: Use $(..) instead of deprecated `..`
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On Sparc, gcc implicitly passes --relax to the linker, but -r is
incompatible with this. Therefore, if --no-relax is supported, it should
be passed to the linker.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clang compiler supports a useful compiler option -Weverything,
and GCC also has other warnings not enabled by -Wall.
If glib header files trigger a warning, however, testing glib with
-Werror will always fail. A size mismatch is also detected without
-Werror, so simply remove it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As all other devel packages are written in the form "name devel",
use this form for libcap devel and libattr devel, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vte >= 0.37 expores API version 2.91, which is where all the active
development is. qemu builds and runs fine with that version, so use it
if it's available.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b4f0375647f7b368d3dbd3834aee58cb0253566a.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I accidentally tried --with-sdlabi="1.0", and it failed much later in
a weird way. Instead, throw an error if the value isn't in our
whitelist.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 60e4822e17697d257a914df03bdb9fff4b4c0490.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Right now if SDL2 is installed but not SDL1, default configure will
entirely disable SDL. Check upfront for SDL2 using pkg-config, but
still prefer SDL1 if both versions are installed.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: c9e570b5964d128a3595efe3170129a3da459776.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes build failure with --enable-xfsctl and
new linux headers (>=4.5) and older xfsprogs(<4.5):
In file included from /usr/include/xfs/xfs.h:38:0,
from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97:
/usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’
struct fsxattr {
^
In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0:
/usr/include/linux/fs.h:155:8: note: originally defined here
struct fsxattr {
This is really a bug in the system headers, but we can work around it
by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides
the struct, so that xfs_fs.h doesn't try to define it as well.
CC: qemu-trivial@nongnu.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
[PMM: adjusted commit message, comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Enable seccomp on MIPS since libseccomp version 2.2.0 when MIPS support
was first added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Support for the PBKDF functions in nettle was not introduced
until version 2.6. Some distros QEMU targets have older
versions and thus lack PBKDF support. Address this by doing
a check in configure for the desired function and then skipping
compilation of the nettle-pbkdf.o module
Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Tested-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This allows you to do:
./config.status --the-option-you-forgot
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1452599928-7471-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to support only pdcurses for Windows, but recently Cygwin added
mingw64-i686-ncurses and mingw64-x86_64-ncurses packages which are
supported now, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The LUKS data format includes use of PBKDF2 (Password-Based
Key Derivation Function). The Nettle library can provide
an implementation of this, but we don't want code directly
depending on a specific crypto library backend. Introduce
a new include/crypto/pbkdf.h header which defines a QEMU
API for invoking PBKDK2. The initial implementations are
backed by nettle & gcrypt, which are commonly available
with distros shipping GNUTLS.
The test suite data is taken from the cryptsetup codebase
under the LGPLv2.1+ license. This merely aims to verify
that whatever backend we provide for this function in QEMU
will comply with the spec.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are three backend impls provided. The preferred
is gnutls, which is backed by nettle in modern distros.
The gcrypt impl is provided for cases where QEMU build
against gnutls is disabled, but crypto is still desired.
No nettle impl is provided, since it is non-trivial to
use the nettle APIs for random numbers. Users of nettle
should ensure gnutls is enabled for QEMU.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Detect if the compiler can support the ifun and avx2, if so, set
CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction
optimization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Set CONFIG_OPENGL_DMABUF in case both mesa and libepoxy are
new enough to have support for dma-buf import/export.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GtaJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2016-02-12' into staging
Xen 2016-02-12
# gpg: Signature made Fri 12 Feb 2016 17:28:09 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2016-02-12:
xen: Drop __XEN_LATEST_INTERFACE_VERSION__ checks from prior to Xen 4.2
xen: move xenforeignmemory compat layer into common place
xen: drop XenXC and associated interface wrappers
xen: drop xen_xc_hvm_inject_msi wrapper
xen: drop support for Xen 4.1 and older.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was needed to build shared library for libcacard.
Now there's no need to use libtool, and since the build system is
already complicated enough, we have a way to slightly de-complicate
it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Xen 4.2 become unsupported upstream in 09/2015 (see
http://wiki.xen.org/wiki/Xen_Release_Features). However as far as the
interfaces provided by the toolstack libraries go 4.2 and 4.3 are
indistinguishable.
Therefore drop support for Xen 4.1 and earlier which removes a whole
pile of compatibility code which makes future work (to use stable
library interfaces provided by upstream) more difficult. In particular
all supported versions now use a pointer as a libxc handle (4.1 and
earlier used an integer, resulting in various shim layers).
Also Xen 4.2 was the first version of Xen to formally support upstream
QEMU (as a preview) so that makes sense as a cut-off now.
This change drops all the configure-y and resulting ifdefs in a mostly
mechanical way. A follow up will refactor wrappers which are now
unused.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Developers on 64-bit machines will often try to perform a
32-bit build of QEMU by running
./configure --extra-cflags="-m32"
Unfortunately if PKG_CONFIG_LIBDIR is not set to point to
the location of the 32-bit pkg-config files, then configure
will silently pick up the 64-bit pkg-config files and still
succeed.
This causes a problem for glib because it means QEMU will
be pulling in /usr/lib64/glib-2.0/include/glibconfig.h
instead of /usr/lib/glib-2.0/include/glibconfig.h
This causes problems because the 'gsize' type (defined as
'unsigned long') will no longer be fully compatible with
the 'size_t' type (defined as 'unsigned int'). Although
both are the same size, the compiler refuses to allow
casts from 'unsigned long *' to 'unsigned int *' as they
are different pointer types. This results in non-obvious
compiler errors when building QEMU eg
qga/commands-posix.c: In function ‘qmp_guest_set_user_password’:
qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types]
rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen);
^
In file included from /usr/include/glib-2.0/glib.h:35:0,
from qga/commands-posix.c:14:
/usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’
guchar *g_base64_decode (const gchar *text,
^
cc1: all warnings being treated as errors
To detect this problem, add a check to configure that
verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t).
If this fails print a warning suggesting that the dev
probably needs to set PKG_CONFIG_LIBDIR.
On Fedora x86_64 it passes with any of:
# ./configure
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64"
And fails with a mis-match
# PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32"
# PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64"
ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T.
You probably need to set PKG_CONFIG_LIBDIR
to point to the right pkg-config files for your
build target
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables integration with other QEMU logging facilities.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-11-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the XML and functions to get and set VSX registers.
Signed-off-by: Anton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until the previous patch this relied on xc_fd(), which was only
implemented for Xen 4.0 and earlier.
Given this wasn't working since Xen 4.0 I have marked this as disabled
by default.
Removing this support drops the use of a bunch of symbols from
libxenctrl, specifically:
- xc_domain_create
- xc_domain_destroy
- xc_domain_getinfo
- xc_domain_max_vcpus
- xc_domain_setmaxmem
- xc_domain_unpause
- xc_evtchn_alloc_unbound
- xc_linux_build
This is another step towards only using Xen libraries which provide a
stable inteface.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.
Specifically libxenevtchn, libxengnttab and libxenforeignmemory.
Previous patches have already laid the groundwork for using these by
switching the existing compatibility shims to reflect the intefaces to
these libraries.
So all which remains is to update configure to detect the libraries
and enable their use. Although they are notionally independent we take
an all or nothing approach to the three libraries since they were
added at the same time.
The only non-obvious bit is that we now open a proper xenforeignmemory
handle for xen_fmem instead of reusing the xen_xc handle.
Build tested with 4.0 .. 4.6 (inclusive) and the patches targetting
4.7 which adds these libraries.
This uses CONFIG_XEN_CTRL_INTERFACE_VERSION == 471 to cover the
introduction of these new interfaces.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Found thanks to shellcheck!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:
$ echo "${a+($b)}"
ksh: ${a+($b)}": bad substitution
though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
nettle no ()
(because if nettle is not present then $nettle will be "no",
not a null string or unset).
Rewrite it to just use an if.
This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.
Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:
int main(void) { return 0; }
This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).
This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWTc5PAAoJECgfDbjSjVRpCJEH/jh1CeWCG7zRBXelWK2F5Cgr
ls+V1sCX7NvkfCa3cDZI8imGjYQUr6EiXtqxPArEVMjmUOUzEHPkOx3ICPpfMU7o
RCVNPELav6VBhGDf3mcIVjlDDN9Syhd90xdgaD8dbeSA0UJFHRTdobNlYpYwiRmp
OAASUawEWLGA5cG+W6MBFWiPQWChpNRK3yK3RVduL71TIe4heuHBez4qTB2QKYvF
KM2nRvpkBY21frXJQqWPlCJ6jsdjI/Fl2xR1t4C9qv0TKcB9FESMmH3Jff2bwMQM
8OSnTIRqYaqT6kJkk3Kns8a+porJMnn69OwBRehLmLW/rmx9HQrR2Ey7bYtgd0Y=
=CrrY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 7fe34ca9c2 actually disabled vhost-user-test altogether,
since CONFIG_VHOST_NET is a per-target config variable.
tests/vhost-user-test is already x86/x64 softmmu specific test, in order
to enable it correctly, kvm & vhost-net are also conditions. To check
that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled.
Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication
when both x86 & x64 are enabled.
Other targets than x86 aren't enabled yet, and is intentionally left as
a future improvement, since I can't easily test those.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop the libseccomp required version back to 2.1.0, restoring the ability
to build w/ --enable-seccomp on Ubuntu 14.04.
Commit 4cc47f8b3c tightened the dependency
on libseccomp from version 2.1.0 to 2.1.1. This broke building on Ubuntu
14.04, the current Ubuntu LTS release. The commit message didn't mention
any specific functional need for 2.1.1, just that it was the most recent
stable version at the time. I reviewed the changes between 2.1.0 and 2.1.1,
but it looks like that update just contained minor fixes and cleanups - no
obvious (to me) new interfaces or critical bug fixes.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
This is a revert of ae6e8ef11e, but with a bit of refactoring,
and also specifically adding arm/aarch64, rather than all
architectures. Currently, libseccomp code appears to also support
mips, ppc, and s390. We could therefore allow qemu to enable
seccomp for those platforms as well, with additional configure
patches, given they're tested and proven to work.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Due to the addition of HVMlite and the requirement to always provide a
valid xc_domain_configuration_t, xc_domain_create now always takes an arch
domain config, which can be NULL in order to mimic previous behaviour.
Add a small stub called xen_domain_create that encapsulates the correct
call to xc_domain_create depending on the libxc version detected.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
I broke this when adding checks for clang++.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b553a04280 inadvertently disabled optimization
for all non-fortify builds. Fix this bug so we only do an
unoptimized build if we want debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447082049-25099-1-git-send-email-peter.maydell@linaro.org
The '--enable-vnc-tls' option to configure was removed in
commit 3e305e4a47
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Aug 6 14:39:32 2015 +0100
ui: convert VNC server to use QCryptoTLSSession
This removes the corresponding help string.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to ./configure all options should have both --enable-foo and
--disable-foo:
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1446473183-24250-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some versions of clang may have difficulty compiling glibc headers when
-D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot
compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This
manifests currently as build failures with clang and any arm target.
According to LLVM dev Richard Smith, clang does not target or support
FORTIFY_SOURCE + glibc, and it should not be relied on.
"It's still an unsupported combination, and while it might compile, some
of the checks are unlikely to work because they require a frontend
inliner to be useful"
See: http://lists.llvm.org/pipermail/cfe-dev/2015-November/045846.html
Conclusion: disable fortify-source if we appear to be using clang instead
of testing for compile success or failure, which may be incidental or not
indicative of proper support of the feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user is using ccache during the configuration step,
it may interfere with some of the configuration tests,
particularly the "Is ccache interfering with macro analysis" step,
which is a bit of a poetic problem.
1) Disallow ccache from reading from the cache during configure,
but don't disable it entirely to allow us to see if it causes other
problems.
2) Force off CCACHE_CPP2 during the ccache test to get a deterministic
answer over whether or not we need to enable that feature later.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446055000-29150-1-git-send-email-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.
Tested with epoxy-1.3.1.
- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy
(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ lm32 tested by kraxel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The previous commit
commit 9a2fd4347c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Apr 13 14:01:39 2015 +0100
crypto: add sanity checking of TLS x509 credentials
defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.
Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.
This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.
This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.
It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.
This gives two new configure flags, which allow the
following possibilities
Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)
./configure
Automatically determine nettle vs gcrypt based on
which is installed
./configure --disable-gnutls
Force use of nettle
./configure --enable-nettle
Force use of gcrypt
./configure --enable-gcrypt
Force use of built-in AES & crippled-DES
./configure --disable-nettle --disable-gcrypt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
=+G1+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc, virtio features, fixes, cleanups
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
i386: keep cpu_model field in MachineState uptodate
vhost: set the correct queue index in case of migration with multiqueue
piix: fix resource leak reported by Coverity
seccomp: add memfd_create to whitelist
vhost-user-test: check ownership during migration
vhost-user-test: add live-migration test
vhost-user-test: learn to tweak various qemu arguments
vhost-user-test: wrap server in TestServer struct
vhost-user-test: remove useless static check
vhost-user-test: move wait_for_fds() out
vhost: add migration block if memfd failed
vhost-user: use an enum helper for features mask
vhost user: add rarp sending after live migration for legacy guest
vhost user: add support of live migration
net: add trace_vhost_user_event
vhost-user: document migration log
vhost: use a function for each call
vhost-user: add a migration blocker
vhost-user: send log shm fd along with log_base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check if memfd_create() is part of system libc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.
Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:
make qemu-ga.exe
or:
make msi
To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.
To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.
An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.
To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
RHEL-6 and SLES-11 provide Python 2.6. It'll also work on OS X back
to 10.6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows virtio-gpu to render in 3d mode.
Uses native opengl support which is present
in gtk versions 3.16 and newer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add virglrenderer library detection. Add 3d mode to virtio-gpu,
wire up virglrenderer library. When in 3d mode render using the
new context management and texture scanout callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let's expose some virtual/fake registers as virtualization specific
registers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h. By luck some files in QEMU have
such an include order, resulting in compile errors:
CC util/osdep.o
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
struct tm *gmtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
struct tm *localtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here
This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.
[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Add related configuration and make files for tilegx.
The target can now build, though not run anything.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking
to jemalloc memory allocator.
We have already tcmalloc support,
but it seem to not working well with a lot of iothreads/disks.
The main problem is that tcmalloc use a shared thread cache of 16MB
by default.
With more threads, this cache is shared, and some bad garbage collections
can occur if the cache is too low.
It's possible to tcmalloc cache increase it with a env var:
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB
With default 16MB, performances are really bad with more than 2 disks.
Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads.
Jemalloc don't have performance problem with default configuration.
Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32,
with rbd block backend (librbd is doing a lot of memory allocation),
1 iothread by disk
glibc malloc
------------
1 disk 29052
2 disks 55878
4 disks 127899
8 disks 240566
15 disks 269976
jemalloc
--------
1 disk 41278
2 disks 75781
4 disks 195351
8 disks 294241
15 disks 298199
tcmalloc 2.2.1 default 16M cache
--------------------------------
1 disk 37911
2 disks 67698
4 disks 41076
8 disks 43312
15 disks 37569
tcmalloc : 256M cache
---------------------------
1 disk 33914
2 disks 58839
4 disks 148205
8 disks 213298
15 disks 218383
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every arch adds its disas configury to both its own config as well
config_disas_all. Make a small function do to both at once.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's support reading and writing of control registers for kvm and tcg.
We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.
Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.
Now we can build qemu-ga MSI package with:
./configure ...
make qemu-ga.exe
make msi
or simply:
./configure ...
make msi
and no longer need to do a full build beforehand.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, if we don't explicitly disable support for MSI installer
via --disable-guest-agent-msi, the configure variable that tracks
the flag, 'guest_agent_msi', never gets set unless one of the probes
fails. Subsequent code then treats this unset value the same as if it
were a "yes" value (via != "no" style checks).
Instead, set the default "yes" value explicitly after the probes, then
make subsequent code expect the values to be set.
This makes it easier to report on whether or not MSI support was
enabled via probe by looking at the ./configure summary.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.
Fix this by moving MSI installer probe after the final qga probes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we need to examine config-host.mak to determine whether
options/probes for MSI package generation had desired result. Report
this more prominently in ./configure summary as we do with other
guest agent configure options.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The cocoa GUI frontend assumes it is the only GUI (it redefines
main() so it always gets control before the rest of QEMU), so
it does not play well with other UIs like SDL or GTK. (Mostly
people building QEMU on OSX don't have the necessary dependencies
available for configure to build those other front ends, so
mostly this problem goes unnoticed.)
Make configure automatically disable the SDL and GTK front ends
if the cocoa front end is enabled. (We were sort of attempting
to do this for SDL before, but not in a way that worked very well.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVzmCgAAoJEL/70l94x66DhFgH/1m3iGac2Ks3vAUAdS2HBcxC
EeziMwWFmkrfbtzUkz/jE0NG5uA2Bs8OFHsC8vmQFwkpDbGUlJ1zd5/N5UOHMG3d
zF0vd+nKNw9C1Fo0/LPyQSeP64/xXEMTmFLqmYf4ZOowz8lr/m6WYrMIzKUoXSEn
FeRtq78moDT8qwF372j8aoQUUpsctXDHBQHORZdcERvlc4mxojeJ3+mNViR2bv3r
92PwGvrJ26mQXEKmGo5O1VM4k7QVg7xJQfgE11x7ShE2E9fJDMgts0Q/xCjWCLwS
BXtEtbd9QeFEfG/mlRFevGtuvksq98m0hN7lAWb13zWmlJFuLyyMmlGfGAlU55Q=
=Y2DB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI fixes from Stefan and Fam
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups
# gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
disas: Defeature print_target_address
hw: fix mask for ColdFire UART command register
scsi-generic: identify AIO callbacks more clearly
scsi-disk: identify AIO callbacks more clearly
scsi: create restart bottom half in the right AioContext
configure: only add CONFIG_RDMA to config-host.h once
qemu-nbd: remove unnecessary qemu_notify_event()
vhost-scsi: Clarify vhost_virtqueue_mask argument
exec: use macro ROUND_UP for alignment
rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu()
exec: drop cpu_can_do_io, just read cpu->can_do_io
cpu_defs: Simplify CPUTLB padding logic
cpu-exec: Do not invalidate original TB in cpu_exec_nocache()
vhost/scsi: call vhost_dev_cleanup() at unrealize() time
virtio-scsi-test: Add test case for tail unaligned WRITE SAME
scsi-disk: Fix assertion failure on WRITE SAME
tests: virtio-scsi: clear unit attention after reset
scsi-disk: fix cmd.mode field typo
virtio-scsi: use virtqueue_map_sg() when loading requests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For unknown reasons (probably a git rebase merge mistake)
commit 2da776db48
Author: Michael R. Hines <mrhines@us.ibm.com>
Date: Mon Jul 22 10:01:54 2013 -0400
rdma: core logic
Adds CONFIG_RDMA to config-host.h twice, as can be seen
in the generated file:
$ grep CONFIG_RDMA config-host.h
#define CONFIG_RDMA 1
#define CONFIG_RDMA 1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped
the --enable-vnc-ws option but forgot to update the help text. Fix this.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unfortunately Ubuntu's pkg-config information for gnutls is broken
for the static linking case, and outputs --libs options which the
compiler does not recognize. Work around this problem by testing
that the --cflags/--libs output will at least allow compilation
before enabling gnutls support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument. The build fails with:
In file included from crypto/cipher.c:71:0:
./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
‘nettle_cbc_encrypt’ from incompatible pointer type
cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
^
In file included from ./crypto/cipher-nettle.c:24:0,
from crypto/cipher.c:71:
/usr/include/nettle/cbc.h:48:1: note: expected
‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
but argument is of type
‘void (*)( void *, size_t, uint8_t *, const uint8_t *)
To allow both versions, we switch to the new definition and #if typedef
it for old versions.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Get rid of direct use of gnutls APIs in quorum blockdrv in
favour of using the crypto APIs. This avoids the need to
do conditional compilation of the quorum driver. It can
simply report an error at file open file instead if the
required hash algorithm isn't supported by QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.
This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
gcrypt, then we should use gcrypt as a cipher backend in
preference to our built-in backend.
This will be used when linking against GNUTLS 1.x and many
GNUTLS 2.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This header file provides w32 ioctl definitions for working with disk
devices. Older versions of mingw do not expose this in a useable way,
so add a configure check and report it via CONFIG_QGA_NTDDSCSI.
Subsequent patches will use this macro to stub out functionality that
relies on this in cases where it's not available.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add the iphlpapi library to use APIs such as GetAdaptersInfo and
GetAdaptersAddresses.
Signed-off-by: Kirk Allan <kallan@suse.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A typo means that the tests dependent on glib with subprocess
support are never run.
Fixes: 9d41401b90
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is an attempt to rearrange configure --help output a bit
and consolidate pairs of --enable/disable into its own section.
After this, help text is easier to sort, manage and read.
More descriptive text can be added as well, since we now have
more space.
While at it, mention en/dis-able-vte.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The help text says --extra-ldflags is appended to LDFLAGS so make it so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
New options were added to enable Windows MSI installation package
creation:
Option --enable-guest-agent-msi, like the name suggests, enables building
Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi
disables MSI package creation; by default, no MSI package is created
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
