Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().
Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().
Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:
nr -bios -pflash -kernel description
unit#0
-- ------- ------- ------- -------------------------------------------
1 present present absent Board code rejects this case, -bios and
present present present -pflash unit#0 are exclusive. Left intact
by this patch.
2 absent absent present Traditional kernel loading, with qemu's
minimal board firmware. Left intact by this
patch.
3 absent present absent Preexistent case for booting guest firmware
present absent absent loaded with -bios or -pflash. Left intact
by this patch.
4 absent absent absent Preexistent case for not loading any
firmware or kernel up-front. Left intact by
this patch.
5 present absent present New case introduced by this patch: kernel
absent present present image is passed to externally loaded
firmware in unmodified form, using fw_cfg.
An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.
In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We rebase fw_cfg_init_mem() to the new function for compatibility with
current callers.
The behavior of the (big endian) multi-byte data reads is best shown
with a qtest session. Here, we are reading the first six bytes of
the UUID
$ arm-softmmu/qemu-system-arm -M virt -machine accel=qtest \
-qtest stdio -uuid 4600cb32-38ec-4b2f-8acb-81c6ea54f2d8
>>> writew 0x9020008 0x0200
<<< OK
>>> readl 0x9020000
<<< OK 0x000000004600cb32
Remember this is big endian. On big endian machines, it is stored
directly as 0x46 0x00 0xcb 0x32.
On a little endian machine, we have to first swap it, so that it becomes
0x32cb0046. When written to memory, it becomes 0x46 0x00 0xcb 0x32
again.
Reading byte-by-byte works too, of course:
>>> readb 0x9020000
<<< OK 0x0000000000000038
>>> readb 0x9020000
<<< OK 0x00000000000000ec
Here only a single byte is read at a time, so they are read in order
similar to the 1-byte data port that is already in PPC and SPARC
machines.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-8-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to drop the fw_cfg_init() shim and to enforce the possible
mappings at compile time.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to introduce a wide data register for fw_cfg, but only for
the MMIO mapped device. The wide data register will also require the
tightening of endiannesses.
However we don't want to touch the I/O port mapped fw_cfg device at all.
Currently QEMU provides a single fw_cfg device type that can handle both
I/O port and MMIO mapping. This flexibility is not actually exploited by
any board in the tree, but it renders restricting the above changes to
MMIO very hard.
Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and
TYPE_FW_CFG_MEM.
TYPE_FW_CFG_IO incorporates the base I/O port and the related combined
MemoryRegion. (NB: all boards in the tree that use the I/O port mapped
flavor opt for the combined mapping; that is, when the data port overlays
the high address byte of the selector port. Therefore we can drop the
capability to map those I/O ports separately.)
TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and
data registers, and their respective MemoryRegions.
The "realize" and "props" class members are specific to each new derived
class, and become unused for the base class. The base class retains the
"reset" member and the "vmsd" member, because the reset functionality and
the set of migrated data are not specific to the mapping.
The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the
possible mappings in separation. For now fw_cfg_init() is retained as a
compatibility shim that enforces the above assumptions.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds the secure_boot boolean field to the arm_boot_info descriptor. This
fields is used to indicate whether Linux should boot into secure or non-secure
state if the ARM EL3 feature is enabled. The default is to leave the CPU in an
unaltered reset state. On EL3 enabled systems, the reset state is secure and
can be overridden by setting the added field to false.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A new common module is created. It implements all functions
that have no device specificity (PCI, Platform).
This patch only consists in move (no functional changes)
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
For x86 architecture, we pass &local_err to set_boot_dev()
when vm startup in pc_coms_init().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
First, we can downsize vl.c, make it simpler by
little and little. Second, I can maintain those code
and make some improvement.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This is done in preparation for the addition of VFIO platform
device support.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that common event handling code is split off, we can move
over sdl_refresh to sdl2-2d.c, and rename it to sdl2_2d_refresh.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create a new function to poll and handle sdl2 events,
which is then just called from the refresh timer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a new sdl2_2d_redraw function for a complete screen refresh,
so we can stop using graphic_hw_invalidate for that. There is
no need to bother console / gfx emulation code if we are just
going to re-blit the screen after window resizes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create new sdl2-2d file for 2d display rendering.
Move over sdl_update code, and rename to sdl2_2d_update.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create sdl2.h header file, in preparation for sdl2 code splitup.
Populate it with sdl2_console struct (renamed from sdl2_state).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Currently 'info jit' outputs half of the information to monitor and the
rest to qemu log. Dumping opcode counts to monitor as a part of 'info
jit' command doesn't sound useful. Add new monitor command 'info
opcount' that only dumps opcode counters.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
directory, and updating MAINTAINERS.
I've also folded my other MAINTAINERS update patches into this, as
they're small by themselves.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Kr1U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/for-2.3-2' into staging
Migration pull for 2.3. Mostly moving the code to the migration/
directory, and updating MAINTAINERS.
I've also folded my other MAINTAINERS update patches into this, as
they're small by themselves.
# gpg: Signature made Tue 16 Dec 2014 12:21:24 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/for-2.3-2:
MAINTAINERS: Update for migrated migration code
Split the QEMU buffered file code out
Split struct QEMUFile out
Remove migration- pre/post fixes off files in migration/ dir
Start migrating migration code into a migration directory
qmp-command.hx: add missing docs for migration capabilites
cpu: verify that block->host is set
cpu: assert host pointer offset within block
exec: add wrapper for host pointer access
MAINTAINERS: add include files to virtio-serial entry
MAINTAINERS: add entry for virtio-rng
MAINTAINERS: migration: add vmstate static checker files
MAINTAINERS: Add myself to migration maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling directly doesn't work due to the qxl-render code running in
spice server thread context. Meanwhile bottom half scheduling is
thread-safe though, so we can use that to kick a cursor update in
main i/o thread context.
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If it isn't, access at an offset will cause memory corruption.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Make accesses safer in case we missed some
check somewhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
host pointer accesses force pointer math, let's
add a wrapper to make them safer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The wait_for_sipi field is set back to 1 after an INIT, so it was not
effective to reset it in kvm_apic_realize. Introduce a reset callback
and reset wait_for_sipi there.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch makes icount warp use the new QEMU_CLOCK_VIRTUAL_RT clock.
This way, icount's QEMU_CLOCK_VIRTUAL will never count time during which
the virtual machine is stopped.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces new QEMU_CLOCK_VIRTUAL_RT clock, which
should be used for icount warping. In the next patch, it
will be used to avoid a huge icount warp when a virtual
machine is stopped for a long time.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this case, QEMU might longjmp out of cpu-exec.c and miss the final
cleanup in cpu_exec_nocache. Do this manually through a new compile
flag.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate accessing the instruction counter from the compensation for
speed and halting that are introduced by qemu_icount_bias. This
introduces new infrastructure used by the record/replay patches.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension.
Remove direct settings in architecture specific files.
Add a new kvm_resamplefds_allowed variable, initialized by
checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding
kvm_resamplefds_enabled() function.
A special notice for s390 where KVM_CAP_IRQFD was not immediatly
advirtised when irqfd capability was introduced in the kernel.
KVM_CAP_IRQ_ROUTING was advertised instead.
This was fixed in "KVM: s390: announce irqfd capability",
ebc3226202d5956a5963185222982d435378b899 whereas irqfd support
was brought in 84223598778ba08041f4297fda485df83414d57e,
"KVM: s390: irq routing for adapter interrupts". Both commits
first appear in 3.15 so there should not be any kernel
version impacted by this QEMU modification.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to do another O(n) pass on the list; the iocb to
split the list at is already available through the array we passed to
io_submit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1418305950-30924-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The bdrv_clear_incoming_migration_all() function has not existed since
commit 7ea2d269cb ("block/migration:
Disable cache invalidate for incoming migration").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1418212937-22222-1-git-send-email-stefanha@redhat.com
Change the message printing code to output a separator for each option
string before it instead of after, then we don't one more extra ' ' in
the end.
To update qemu-iotests output files, most of the times one would just
copy the *.out.bad to *.out. With this change we will not have the
space disliked by checkpatch.pl.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If vmdk blindly tries to use path_combine() using bs->file->filename as
the base file name, this will result in a bad error message for JSON
file names when calling bdrv_open(). It is better to only try
bs->file->exact_filename; if that is empty, bs->file->filename will be
useless for path_combine() and an error should be emitted (containing
bs->file->filename because desc_file_path (which is
bs->file->exact_filename) is empty).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUid7mAAoJEL7lnXSkw9fbX0YH/RXeoX7IN1QVEP8Z2dLq4nzt
igHm4Gd4ENX6pdluHmXAxzKoHR78yNGFegzuv0IJBfav8kGCQWW6zAf4TUk/udtn
AKPk1yauVKNzCvmYldrfbuu4HedZqkftE0tyDZuAK50pZH1hzX7qiAT1C0OlarLQ
Tqy4+ouYiRja2hLq4YJCM9mmYt0sbMDShIcHBYRTdD0cxoPZ+JZEeAQYg+FYNdIo
jioVg8NgmFZW37UWeBTCKG+DcX9NwXwyo/ASdIozM+aQcTBx/nXn7/NOAxXlxUX8
M9AS9iz+LWBfwof3HLbzLLTvTmE66Z78/TluFMmEbpK4ts0ZXRJKDHE/pfynRD0=
=PXlQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-12-11' into staging
trivial patches for 2014-12-11
# gpg: Signature made Thu 11 Dec 2014 18:13:58 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-12-11:
Sort include/qemu/typedefs.h
hpet: increase spelling precision
pflash_cfi02.c: associate "cfi.pflash02" to "Storage devices" category
vt82c686: fix coverity warning about out-of-bounds write
virtio: remove useless declaration of virtio_net_init()
qapi-schema: fix typo about change-vnc-password
fw_cfg: remove superfluous blank line
get_maintainer.pl: Remove the --git-chief-penguins option
configure: Replace which(1) with "has"
util: Use g_new() & friends where that makes obvious sense
util: Fuse g_malloc(); memset() into g_new0()
util: Drop superfluous conditionals around g_free()
Drop superfluous conditionals around g_strdup()
Drop superfluous conditionals around qemu_opts_del()
usb: delete redundant brackets in usb_host_handle_control()
virtio-bus: avoid breaking build when open DEBUG switch
acpi-build: Make DPRINTF working for acpi-build
acpi-build: adjust indention 8 -> 4 spaces
target-s390x: fix possible out of bounds read
qmp: fix typo in input-send-event examples
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mainly to make it less likely to conflict during merges.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pMcy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141211' into staging
target-arm queue:
* pass semihosting exit code out to system
* more TrustZone support code (still not enabled yet)
* allow user to direct semihosting to gdb or native explicitly
rather than always auto-guessing the destination
* fix memory leak in realview_init
* fix coverity warning in hw/arm/boot
* get state migration working for AArch64 CPUs
* check errors in kvm_arm_reset_vcpu
# gpg: Signature made Thu 11 Dec 2014 12:16:19 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141211: (33 commits)
target-arm: Check error conditions on kvm_arm_reset_vcpu
target-arm: Support save/load for 64 bit CPUs
target-arm/kvm: make reg sync code common between kvm32/64
arm_gic_kvm: Tell kernel about number of IRQs
hw/arm/boot: fix uninitialized scalar variable warning reported by coverity
hw/arm/realview.c: Fix memory leak in realview_init()
target-arm: make MAIR0/1 banked
target-arm: make c13 cp regs banked (FCSEIDR, ...)
target-arm: make VBAR banked
target-arm: make PAR banked
target-arm: make IFAR/DFAR banked
target-arm: make DFSR banked
target-arm: make IFSR banked
target-arm: make DACR banked
target-arm: make TTBCR banked
target-arm: make TTBR0/1 banked
target-arm: make CSSELR banked
target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI
target-arm: add SCTLR_EL3 and make SCTLR banked
target-arm: add MVBAR support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The usual semihosting behaviour is to process the system calls locally and
return; unfortuantelly the initial implementation dinamically changed the
target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb,
is not implemented. The result was that during debug sessions the semihosting
calls were discarded.
This patch adds a configuration variable and an option to set it on the
command line:
-semihosting-config [enable=on|off,]target=native|gdb|auto
This option enables semihosting and defines where the semihosting calls will
be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which
means 'gdb' during debug sessions and 'native' otherwise.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net
[PMM: moved declaration and definition of semihosting_target to
gdbstub.h and gdbstub.c to fix build failure on linux-user]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only image format driver that even potentially accesses anything
after 512 bytes in its bdrv_probe() implementation is VMDK, which reads
a plain-text descriptor file. In practice, the field it's looking for
seems to come first and will be well within the first 512 bytes, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-7-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Substitute BlockDriverState by BlockBackend in every globally visible
function provided by nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding something like a "delete notifier" to a BlockBackend would not
make much sense, because whoever is interested in registering there will
probably hold a reference to that BlockBackend; therefore, the notifier
will never be called (or only when the notifiee already relinquished its
reference and thus most probably is no longer interested in that
notification).
Therefore, this patch just passes through the close notifier interface
of the root BDS. This will be called when the device is ejected, for
instance, and therefore does make sense.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because all BlockDriverStates behind a single BlockBackend reside in a
single AioContext, it is fine to just pass these functions
(blk_add_aio_context_notifier() and blk_remove_aio_context_notifier())
through to the root BlockDriverState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are already some blk_aio_* functions, so we might as well have
blk_co_* functions (as far as we need them). This patch adds
blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which
is not a blk_co_* function but is needed nonetheless).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This returns the node name of a BDS. Remove the TODO comment and expect
the callers to be explicit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to bdrv_next, this traverses through graph_bdrv_states. Will be
useful to enumerate all the named nodes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 1773d9ee (virtio-net: cleanup: init and exit function)
removed the definition of virtio_net_init(), but didn't remove its
declaration in the header. Clean that up.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commits:
- 6a1fa9f5 (monitor: add del completion for peripheral device)
- 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)
cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
<qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet
(qemu) device_del
/home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
Aborted (core dumped)
The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).
Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
c/s 9b23cfb76b
or
c/s b154537ad0
moved the testing of xen_enabled() from pc_init1() to
pc_machine_initfn().
xen_enabled() does not return the correct value in
pc_machine_initfn().
Changed vmport from a bool to an enum. Added the value "auto" to do
the old way. Move check of xen_enabled() back to pc_init1().
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Performance wise it's better to align GVA by the backend's
page size.
Also do not allow to create DIMM device with suboptimal
size (i.e. not aligned to backends page size) to aviod
memory loss.
Do above only for 2.2 and newer machine types to avoid
breaking working configs with 2.1 machine type.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running in KVM mode, kvm_set_phys_mem() will silently
fail if registered MemoryRegion address/size is not page
aligned. Causing memory hotplug failure in guest.
Mapping non aligned MemoryRegion in TCG mode 'works', but
sane guest OS still expects page aligned memory module
and fails to initialize it if it's not aligned.
So do not allow non aligned (i.e. valid) address/size
values for DIMM to avoid either KVM failure or guest
issues caused by it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When more memory devices are used than available
KVM memory slots, QEMU crashes with:
kvm_alloc_slot: no free slot available
Aborted (core dumped)
Fix this by checking that KVM has a free slot before
attempting to map memory in guest address space.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code in invalidate_and_set_dirty() needs to handle addr/length
combinations which cross guest physical page boundaries. This can happen,
for example, when disk I/O reads large blocks into guest RAM which previously
held code that we have cached translations for. Unfortunately we were only
checking the clean/dirty status of the first page in the range, and then
were calling a tb_invalidate function which only handles ranges that don't
cross page boundaries. Fix the function to deal with multipage ranges.
The symptoms of this bug were that guest code would misbehave (eg segfault),
in particular after a guest reboot but potentially any time the guest
reused a page of its physical RAM for new code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416167061-13203-1-git-send-email-peter.maydell@linaro.org
patches, pending confirmation from the submitter that they really
fix QNX.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUZMqiAAoJEL/70l94x66DQEEH/3kWZSwiC6yh5icRmLd1PX9Q
P8a5qIGQUldN54orlr4bDs4Slb6w4CVwwupT6AIFvNbZDFQVlJTMd+3ssZ03H++D
eJ9WvY3yVmrC1ofFk1WNIposk01gvM0U74Kns4ttEuJ7UyB75mhPEegQd3B8WbPa
/eJILlXu9ayxj60yEqmoR8IfqrkuuTHx7P4QmpJigGeLkBhQOq0TXjb1xi+4JPnv
BHjVjA6YNtzuMO2wP0y6KE/9HZpow0luAb+vB0NkY0NoEezVucoDWLMMUkpSiZI/
yYFEqp4lzRo2ygnJXlGvLFND6F2qacGIIU5lj5t8a2BmswqD83JEt/idQGYeIzM=
=ExeA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
x86 and SCSI fixes. I left out the APIC device model
patches, pending confirmation from the submitter that they really
fix QNX.
# gpg: Signature made Thu 13 Nov 2014 15:13:38 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
acpi: accurate overflow check
smbios: change 'ram_addr_t' variables to 'uint64_t'
kvmclock: Add comment explaining why we need cpu_clean_all_dirty()
target-i386: fix Coverity complaints about overflows
apic_common: migrate missing fields
target-i386: eliminate dead code and hoist common code out of "if"
virtio-scsi: Fix comment for VirtIOSCSIReq
virtio-scsi: dataplane: suppress guest notification
esp: Do not overwrite ESP_TCHI after reset
virtio-scsi: dataplane: fix allocation for 'cmd_vrings'
esp: fix coding standards
virtio-scsi: work around bug in old BIOSes
esp-pci: fixup deadlock with linux
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cdb is not zeroed by virtio_scsi_init_req, so fix the misleading
comment.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After a reset ESP_TCHI should contain the unique ID
of the chip. This value will be overwritten with the
current tranfer count if the transfer count has
previously been set.
So we should always return the chip id if ESP_TCHI
has never been written to.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It returns more information than binary, fix the comment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When do memory hotplug, if there is numa node, we should add
the memory size to the corresponding node memory size.
It affects the result of hmp command "info numa".
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to support spawning of sysbus devices dynamically via the command line.
The easiest way to represent these dynamically spawned devices in the guest's
memory and IRQ layout is by preallocating some space for dynamic sysbus devices.
This is what the "platform bus" device does. It is a sysbus device that exports
a configurably sized MMIO region and a configurable number of IRQ lines. When
this device encounters sysbus devices that have been dynamically created and not
manually wired up, it dynamically connects them to its own pool of resources.
The machine model can then loop through all of these devices and create a guest
configuration (device tree) to make them visible to the guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices have a range of MMIO regions they expose. The exact number
of regions is device specific and internal information to the device model.
Expose whether a region exists via a public interface. That way our platform
bus enumeration code can dynamically determine how many regions exist.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can be spawned by C code or dynamically via the command line.
In the latter case, we need to be able to find the dynamically created devices
to do things with them.
This patch adds a search helper that makes it easy to look for dynamically
spawned sysbus devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV65JAAoJECgfDbjSjVRpqzgIAJJDaU95xdtl/snSJVbSGsgR
2YW8mC8pjkZnV8fbu7F1vOTJSpAhj0eeXaDTqtbBhgAqBlqQ5tWAT9xDnUIlBlHN
GVTWzWaifVOGMj087Ovvy9+4NyfsuvTlf3aOjvLfqlaDqI5dbZQAyIdHNFyV7Qy9
txgAcERp+caZ4rN8XgAv82KV1JGj8PXermTgLJ+DcqYxhwWm66eEviQ+f+F5YImJ
CJQ6HFPXjclxHCuyKBL334SIwq8IfYyUUkIsGgKCNuHPUud7r2rqsIlRfeZBwLf9
igUgf4iPQL5TNVq9qwQmnTK6ddHTqHZmGyu902WxHK/N0EDq4dLw8diqFhZxo9Y=
=f7Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows machine classes to specify which display device they want
as default. If unspecified the current behavior (try cirrus, failing
that try stdvga, failing that use no display) will be used.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUVhuDAAoJEL7lnXSkw9fbOKMIAIE3XZMhar4Vmokb/K0DFbnh
gy2z7iCe7vumLKiRSJX1LGmkFO3dwykw82JZQ1SVo0RdgguJ5dx1Abx1qDM1rojL
jJT0pJ9zWPl4fTv38wCEfaysQHPdgwoH4826ga+MXnVS9XHRHHxuQ4vI01AK3oyQ
4t6/wto9H8kF3n6ny7tz5WNZClsq7qbiIqw5nNCILQfSh/VBPwxQNBiWf/nYVMuY
Ubk5noztZwH+hbiAQL5lAPz/HolcRwg1tzbR0dfmt8/aqO28rJhasG58JgtziI2y
JSg4BwldqUQEgiHonArLfQDixjLtEEyL+fQSzZm02ixwcBpc/ADSyGDy2R1zpH8=
=j1ga
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
megasas 2108 emulation, and other small patches here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUU8RCAAoJEL/70l94x66Dvh0H/3CMdRSk9UugaHxn+VeSqGdz
Z5KQpvUqZts03hISrFATOG9XZGTnsxuVtzGuR+kpW4luQXd4x4dv/pFIiS43FWNr
hGKckxLsSYLM57eh5pUbRfoIAYwa+txe/PnCa1GGSyrEbBe6isF39LrZnkCEJWNc
yEF4nIwTJqAAkvqgXv6SWzINr9vKUYHlGG2a6I2pSM3pofL3Pe8dr5Lg2rXCU3QS
Petn3Xj45oKhQGX9mBrfFQR9xeJ/Uq1chF5GpIYWPqpeSFmHd7A6gW+cpGMN+RlT
OG8JnOwWBxQ26ZOjS6Ek52RiDCr4fsEWmbrwYRYz1D5hi9jSnpOYxipj1kSOG5k=
=479x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
The last round of patches for soft freeze. Includes ivshmem bugfixes,
megasas 2108 emulation, and other small patches here and there.
# gpg: Signature made Fri 31 Oct 2014 17:17:54 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (35 commits)
virtio-scsi: fix dataplane
ivshmem: use error_report
ivshmem: Fix fd leak on error
ivshmem: Fix potential OOB r/w access
ivshmem: validate incoming_posn value from server
ivshmem: Check ivshmem_read() size argument
i386: fix breakpoints handling in icount mode
kvm_stat: Add powerpc support
kvm_stat: Abstract ioctl numbers
kvm_stat: Rework platform detection
kvm_stat: Fix the non-x86 exit reasons
kvm_stat: Only consider online cpus
virtio-scsi: Fix num_queue input validation
scsi: devirtualize unrealize of SCSI devices
virtio-scsi: Fix memory leak when realize failed
iscsi: Refuse to open as writable if the LUN is write protected
kvmvapic: patch_instruction fix
vl.c: Fix Coverity complaining for vmstate_dump_file
Add skip_dump flag to ignore memory region during dump
-machine vmport=off: Allow disabling of VMWare ioport emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New MIPS features depend on the access type and enum is more convenient than
using the numbers directly.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Now that op blockers are in use, we can ensure that no other sources are
generating I/O on a BlockDriverState. Therefore it is possible to drain
requests for a single BDS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-7-git-send-email-stefanha@redhat.com
Block jobs will run in the BlockDriverState's AioContext, which may not
always be the QEMU main loop.
There are some block layer APIs that are either not thread-safe or risk
lock ordering problems. This includes bdrv_unref(), bdrv_close(), and
anything that calls bdrv_drain_all().
The block_job_defer_to_main_loop() API allows a block job to schedule a
function to run in the main loop with the BlockDriverState AioContext
held.
This function will be used to perform cleanup and backing chain
manipulations in block jobs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a block job signals readiness, this is currently reported only
through QMP. If qemu wants to use block jobs for internal tasks, there
needs to be another way to correctly detect when a block job may be
completed.
For this reason, introduce a bool "ready" which is set when the block
job may be completed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement block_job_complete_sync() by doing the exact same thing as
block_job_cancel_sync() does, only with calling block_job_complete()
instead of block_job_cancel().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
at least in block layer we have the case of limits being defined for a
BlockDriverState. However, in this context often zero (0) has the special
meanining of undefined which means no limit. If two of those limits are
combined and the minimum is needed the minimum function should only return
zero if both parameters are zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Differently from older versions, SMBIOS version 2.6 is explicit about
the encoding of UUID fields:
> Although RFC 4122 recommends network byte order for all fields, the PC
> industry (including the ACPI, UEFI, and Microsoft specifications) has
> consistently used little-endian byte encoding for the first three fields:
> time_low, time_mid, time_hi_and_version. The same encoding, also known as
> wire format, should also be used for the SMBIOS representation of the UUID.
>
> The UUID {00112233-4455-6677-8899-AABBCCDDEEFF} would thus be represented
> as 33 22 11 00 55 44 77 66 88 99 AA BB CC DD EE FF.
The dmidecode tool implements this and decodes the above "wire format"
when SMBIOS version >= 2.6. We moved from SMBIOS version 2.4 to 2.8 when
we started building the SMBIOS entry point inside QEMU, on commit
c97294ec1b.
Change smbios_build_type_1_table() to encode the UUID as specified.
To make sure we won't change the guest-visible UUID when upgrading to a
newer QEMU version, keep the old behavior on pc-*-2.1 and older.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Rename:
AcpiCpuHotplug_init --> acpi_cpu_hotplug_init
AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops
for better readability, just cleanup.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Remove the unused CPU hot-plug notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Update rtc_cmos in pc_cpu_plug() directly, instead of the notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Paolo Bonzini
Laszlo Ersek
Greg Bellows
Eric Auger
Peter Maydell
Gonglei
Kim Phillips
Gerd Hoffmann
Max Filippov
Antony Pavlov
Michael S. Tsirkin
Kevin O'Connor
Pavel Dovgalyuk
Stefan Hajnoczi
Fam Zheng
Max Reitz
Dr. David Alan Gilbert
Liviu Ionescu
Kevin Wolf
Marcel Apfelbaum
Don Slutz
Igor Mammedov
Hannes Reinecke
zhanghailiang
Alexander Graf
Leon Alrae
Peter Lieven
Eduardo Habkost
Gu Zheng