These instructions are all load/store a byte from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-21-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 8-bit addition/subtraction in
various combinations. Most instructions are grouped in pool14,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-20-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 16-bit addition/subtraction in
various combinations. The instructions are grouped in pool13,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-19-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds two 32-bit values with respect
to corresponding carry flags in MXU_CR.
XRa += XRb + LeftCarry flag;
XRd += XRc + RightCarry flag;
Suddenly, it doesn't modify carry flags as a result of addition.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-18-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are all dual 32-bit addition/subtraction in
various combinations. The instructions are grouped in pool12,
see the opcode organization in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-17-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts two 32-bit values in XRb and XRc.
Placing results in XRa and XRd and updates carry bits for each
path in the MXU control register.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-16-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction adds/subtracts four 16-bit packed in XRb and XRc.
Placing packed 16-bit results in XRa and XRd.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-15-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-14-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The instruction is similar to multiply and accumulate
but works with MXU registers set.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-13-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are close to D16MAC so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-12-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool3, see the grand tree above
in the file.
The instructions are close to D16MUL so common generation function
provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-11-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool2, see the grand tree above
in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-10-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This instruction is used to add/subtract quadruple
8-bit values to another quadruple in parallel.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-9-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are part of pool1, see the grand tree above
in the file. Q8ADD is part of pool1 too but belong to another
category of instructions, thus will be made in later patches.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-8-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions were designed that they overwrite source
register during partial storing of result.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-7-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions are used to set bits depending on
comparison result in each byte respectively.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-6-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to multiply 2x32-bit GPR sources & accumulate
result into 64-bit pair of XRF registers.
These instructions stain HI/LO registers with the final result.
Their opcode is close to the MIPS32R1 MADD[U]/MSUB[U], so it have to
call decode_opc_special2_legacy when failing to find MXU opcode.
Moreover, it solves issue with reinventing MUL and malfunction
MULU/CLZ/CLO instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-5-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These instructions used to load from memory to GPR via indexed address
divided by base and index parts in GPR registers.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-4-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
XBurstR1 - is the MIPS32R1 CPU which aims to cover all Ingenic SoCs
older than JZ4770 and some newer.
XBurstR2 - is the MIPS32R2 CPU which aims to cover all Ingenic SoCs
starting from to JZ4770.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-3-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add support for emulating:
- S32LDDV and S32LDDVR
- S32STD and S32STDR
- S32STDV and S32STDVR
MXU instructions.
Add support for emulating MXU instructions with address register
post-modify counterparts:
- S32LDI and S32LDIR
- S32LDIV and S32LDIVR
- S32SDI and S32SDIR
- S32SDIV and S32SDIVR
Refactor support for emulating the S32LDD and S32LDDR instructions.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-2-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
After implemented CPUCFG and CSR, we are now able to boot Linux
kernel with Loongson-3A4000 CPU, so there is no point to restrict
CPU type to 3A1000 only, instead we just check for presence of
INSN_LOONGSON3A.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-3-jiaxun.yang@flygoat.com>
[JY: Check for cpu_type_supports_isa(INSN_LOONGSON3A)]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.
Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.
Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always set to true when a multi
function PCI device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be replaced by trivial code.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I440FX realization is currently mixed with PIIX3 creation. Furthermore, it is
common practice to only set properties between a device's qdev_new() and
qdev_realize(). Clean up to resolve both issues.
Since I440FX spawns a PCI bus let's also move the pci_bus initialization there.
Note that when running `qemu-system-x86_64 -M pc -S` before and after this
patch, `info mtree` in the QEMU console doesn't show any differences except that
the ordering is different.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-18-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_init() is a legacy init function. The previous patches worked towards
TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by
transforming the parameters passed to i440fx_init() into property assignments.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I440FX needs a different PCI device model if the "igd-passthru" property is
enabled. The type name is currently passed as a parameter to i440fx_init(). This
parameter will be replaced by a property assignment once i440fx_init() gets
resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-16-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the properties in anticipation of QOM'ification; Q35 has the same
properties.
Note that we want to avoid a "ram size" property in the QOM interface since it
seems redundant to both properties introduced in this change. Thus the removal
of the ram_size parameter. We assume the invariant of both properties to sum up
to "ram size" which is already asserted in pc_memory_init(). Under Xen the
invariant seems to hold as well, so we now also check it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-15-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the property in anticipation of QOM'ification; Q35 has the same
property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-14-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The goal is to eliminate i440fx_init() which is a legacy init function. This
neccessitates the memory regions to be properties, like in Q35, which will be
assigned in board code.
Since i440fx needs different PCI devices in Xen mode, and since i440fx shall
be self-contained, the PCI device will be created during realization of the
host. Thus the pointers need to be moved to the host structure to be usable as
properties.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-13-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_realize() realizes the PCI device inside the host bridge
(PCII440FXState), but is implemented between i440fx_pcihost_realize() and
i440fx_init() which deal with the host bridge itself (I440FXState). Since we
want to append i440fx_init() to i440fx_pcihost_realize() later let's move
i440fx_realize() out of the way.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-12-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`PCIHostState` is often referred to as `phb`, own device state usually as `s`.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The parent-child relation is usually established near a child's qdev_new(). For
i440fx this allows for reusing the machine parameter, thus avoiding
qdev_get_machine() which relies on a global variable.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eliminates an else branch.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host already has a PCI_HOST_BYPASS_IOMMU property. However, the
host initializes this property itself by accessing global machine state,
thereby assuming it to be a PC machine. Avoid this by having board code
set this property.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a macro to avoid copy and pasting strings which can easily
cause typos.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230630073720.21297-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Q35 PCI host currently sets the PC machine's PCI bus attribute
through global state, thereby assuming the machine to be a PC machine.
The Q35 machine code already holds on to Q35's pci bus attribute, so can
easily set its own property while preserving encapsulation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes the following clangd warning (-Winitializer-overrides):
q35.c:297:19: Initializer overrides prior initialization of this subobject
q35.c:292:19: previous initialization is here
Settle on little endian which is consistent with using pci_host_conf_le_ops.
Fixes: bafc90bdc5 ("q35: implement TSEG")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The variable is redundant to "phb" and is never used by its real type.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230630073720.21297-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device reset is issued per device, not per VQ. The legacy device reset
message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore,
this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device
messages.
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like
virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a
concept of one-time messages which is misleading. One-time messages are sent
once per operation on the device, not once for the lifetime of the device.
Therefore, as discussed in [1], vhost_user_one_time_request should be
renamed to vhost_user_per_device_request and the relevant comments updated
to match the real functionality.
[1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
>From SMBIOS 3.0 specification, core count field means:
Core Count is the number of cores detected by the BIOS for this
processor socket. [1]
Before 003f230e37 ("machine: Tweak the order of topology members in
struct CpuTopology"), MachineState.smp.cores means "the number of cores
in one package", and it's correct to use smp.cores for core count.
But 003f230e37 changes the smp.cores' meaning to "the number of cores
in one die" and doesn't change the original smp.cores' use in smbios as
well, which makes core count in type4 go wrong.
Fix this issue with the correct "cores per socket" caculation.
[1] SMBIOS 3.0.0, section 7.5.6, Processor Information - Core Count
Fixes: 003f230e37 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-5-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From SMBIOS 3.0 specification, thread count field means:
Thread Count is the total number of threads detected by the BIOS for
this processor socket. It is a processor-wide count, not a
thread-per-core count. [1]
So here we should use threads per socket other than threads per core.
[1] SMBIOS 3.0.0, section 7.5.8, Processor Information - Thread Count
Fixes: c97294ec1b ("SMBIOS: Build aggregate smbios tables and entry point")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-4-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smp.sockets is the number of sockets which is configured by "-smp" (
otherwise, the default is 1). Trying to recalculate it here with another
rules leads to errors, such as:
1. 003f230e37 ("machine: Tweak the order of topology members in struct
CpuTopology") changes the meaning of smp.cores but doesn't fix
original smp.cores uses.
With the introduction of cluster, now smp.cores means the number of
cores in one cluster. So smp.cores * smp.threads just means the
threads in a cluster not in a socket.
2. On the other hand, we shouldn't use smp.cpus here because it
indicates the initial number of online CPUs at the boot time, and is
not mathematically related to smp.sockets.
So stop reinventing the another wheel and use the topo values that
has been calculated.
Fixes: 003f230e37 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-3-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The number of cores/threads per socket are needed for smbios, and are
also useful for other modules.
Provide the helpers to wrap the calculation of cores/threads per socket
so that we can avoid calculation errors caused by other modules miss
topology changes.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20230628135437.1145805-2-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus.
It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates
of similar devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-3-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
