python3 may not be the expected python version.
Use PYTHON to invoke python.
Fixes: 22e11539e1 ("edk2: replace build scripts")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
git shortlog
------------
Gerd Hoffmann (7):
disable array bounds warning
better kvm detection
detect physical address space size
move 64bit pci window to end of address space
be less conservative with the 64bit pci io window
qemu: log reservations in fw_cfg e820 table
check for e820 conflict
José Martínez (1):
Fix high memory zone initialization in CSM mode
Lukas Stockner via SeaBIOS (1):
virtio-blk: Fix integer overflow for large max IO sizes
Mark Cave-Ayland (3):
esp-scsi: flush FIFO before sending SCSI command
esp-scsi: check for INTR_BS/INTR_FC instead of STAT_TC for command completion
esp-scsi: handle non-DMA SCSI commands with no data phase
Niklas Cassel via SeaBIOS (1):
ahci: handle TFES irq correctly
Tony Titus via SeaBIOS (1):
Increase BUILD_MAX_E820 to 128
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bios.bin is now used only by ISA PC, so PCI drivers are not necessary.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All 32-bit hppa CPUs allow a fixed number of TLB entries to have a
different page size than the default 4k.
Those are called "Block-TLBs" and are created at startup by the
operating system and managed by the firmware of hppa machines
through the firmware PDC_BLOCK_TLB call.
This patchset adds the necessary glue to SeaBIOS-hppa and
qemu to allow up to 16 BTLB entries in the emulation.
Two patches from Mikulas Patocka fix signal delivery issues
in linux-user on hppa.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQnz0wAKCRD3ErUQojoP
X6NDAP9F1Huhceot8peohGodRDOhnXWfDcjQZSDvadieKv/rJQEA60Z5QV5VlQgw
SyUT4AcoiB7N4nvS+iDa+6dKfRH/YQM=
=kqqt
-----END PGP SIGNATURE-----
Merge tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa into staging
Block-TLB support and linux-user fixes for hppa target
All 32-bit hppa CPUs allow a fixed number of TLB entries to have a
different page size than the default 4k.
Those are called "Block-TLBs" and are created at startup by the
operating system and managed by the firmware of hppa machines
through the firmware PDC_BLOCK_TLB call.
This patchset adds the necessary glue to SeaBIOS-hppa and
qemu to allow up to 16 BTLB entries in the emulation.
Two patches from Mikulas Patocka fix signal delivery issues
in linux-user on hppa.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZQnz0wAKCRD3ErUQojoP
# X6NDAP9F1Huhceot8peohGodRDOhnXWfDcjQZSDvadieKv/rJQEA60Z5QV5VlQgw
# SyUT4AcoiB7N4nvS+iDa+6dKfRH/YQM=
# =kqqt
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Sep 2023 15:17:39 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-btlb-pull-request' of https://github.com/hdeller/qemu-hppa:
linux-user/hppa: lock both words of function descriptor
linux-user/hppa: clear the PSW 'N' bit when delivering signals
target/hppa: Wire up diag instruction to support BTLB
target/hppa: Extract diagnose immediate value
target/hppa: Add BTLB support to hppa TLB functions
target/hppa: Report and clear BTLBs via fw_cfg at startup
target/hppa: Allow up to 16 BTLB entries
target/hppa: Update to SeaBIOS-hppa version 9
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Upgrade OpenSBI from v1.3 to v1.3.1 and the pre-built bios images
which fixes the boot failure seen when using QEMU to do a direct
kernel boot with Microchip Icicle Kit board machine.
The v1.3.1 release includes the following commits:
0907de3 lib: sbi: fix comment indent
eb736a5 lib: sbi_pmu: Avoid out of bounds access
7828eeb gpio/desginware: add Synopsys DesignWare APB GPIO support
c6a3573 lib: utils: Fix sbi_hartid_to_scratch() usage in ACLINT drivers
057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230719165817.889465-1-bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upgrade OpenSBI from v1.2 to v1.3 and the pre-built bios images.
The v1.3 release includes the following commits:
440fa81 treewide: Replace TRUE/FALSE with true/false
6509127 Makefile: Remove -N ldflag to prevent linker RWX warning
65638f8 lib: utils/sys: Allow custom HTIF base address for RV32
f14595a lib: sbi: Allow platform to influence cold boot HART selection
6957ae0 platform: generic: Allow platform_override to select cold boot HART
cb7e7c3 platform: generic: Allow platform_override to perform firmware init
8020df8 generic/starfive: Add Starfive JH7110 platform implementation
6997552 lib: sbi_hsm: Rename 'priv' argument to 'arg1'
9e397e3 docs: domain_support: Use capital letter for privilege modes
9e0ba09 include: sbi: Fine grain the permissions for M and SU modes
aace1e1 lib: sbi: Use finer permission semantics for address validation
22dbdb3 lib: sbi: Add permissions for the firmware start till end
1ac14f1 lib: sbi: Use finer permission sematics to decide on PMP bits
44f736c lib: sbi: Modify the boot time region flag prints
20646e0 lib: utils: Use SU-{R/W/X} flags for region permissions during parsing
3e2f573 lib: utils: Disallow non-root domains from adding M-mode regions
59a08cd lib: utils: Add M-mode {R/W} flags to the MMIO regions
001106d docs: Update domain's region permissions and requirements
da5594b platform: generic: allwinner: Fix PLIC array bounds
ce2a834 docs: generic.md: fix typo of andes-ae350
8ecbe6d lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP
b1818ee include: types: add always inline compiler attribute
9c4eb35 lib: utils: atcsmu: Add Andes System Management Unit support
787296a platform: andes/ae350: Implement hart hotplug using HSM extension
7aaeeab lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h
a990309 lib: utils: Fix reserved memory node for firmware memory
fefa548 firmware: Split RO/RX and RW sections
2f40a99 firmware: Move dynsym and reladyn sections to RX section
c10e3fe firmware: Add RW section offset in scratch
b666760 lib: sbi: Print the RW section offset
230278d lib: sbi: Add separate entries for firmware RX and RW regions
dea0922 platform: renesas/rzfive: Configure Local memory regions as part of root domain
33bf917 lib: utils: Add fdt_add_cpu_idle_states() helper function
c45992c platform: generic: allwinner: Advertise nonretentive suspend
c8ea836 firmware: Fix fw_rw_offset computation in fw_base.S
8050081 firmware: Not to clear all the MIP
84d15f4 lib: sbi_hsm: Use csr_set to restore the MIP
199189b lib: utils: Mark only the largest region as reserved in FDT
66b0e23 lib: sbi: Ensure domidx_to_domain_table is null-terminated
642f3de Makefile: Add missing .dep files for fw_*.elf.ld
09b34d8 include: Add support for byteorder/endianness conversion
680bea0 lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h
b224ddb include: types: Add typedefs for endianness
aa5dafc include: sbi: Fix BSWAPx() macros for big-endian host
e3bf1af include: Add defines for SBI debug console extension
0ee3a86 lib: sbi: Add sbi_nputs() function
4e0572f lib: sbi: Add sbi_ngets() function
eab48c3 lib: sbi: Add sbi_domain_check_addr_range() function
5a41a38 lib: sbi: Implement SBI debug console extension
c43903c lib: sbi: Add console_puts() callback in the console device
29285ae lib: utils/serial: Implement console_puts() for semihosting
65c2190 lib: sbi: Speed-up sbi_printf() and friends using nputs()
321293c lib: utils/fdt: Fix fdt_pmu.c header dependency
aafcc90 platform: generic/allwinner: Fix sun20i-d1.c header dependency
745aaec platform: generic/andes: Fix ae350.c header dependency
99d09b6 include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1
6861ee9 lib: utils: fdt_fixup: Fix compile error
4f2be40 docs: fix typo in fw.md
30ea806 lib: sbi_hart: Enable hcontext and scontext
81adc62 lib: sbi: Align SBI vendor extension id with mvendorid CSR
31b82e0 include: sbi: Remove extid parameter from vendor_ext_provider() callback
c100951 platform: generic: renesas: rzfive: Add support to configure the PMA
2491242 platform: generic: renesas: rzfive: Configure the PMA region
67b2a40 lib: sbi: sbi_ecall: Check the range of SBI error
5a75f53 lib: sbi/sbi_domain: cosmetic style fixes
bc06ff6 lib: utils/fdt/fdt_domain: Simplify region access permission check
17b3776 docs: domain_support: Update the DT example
1364d5a lib: sbi_hsm: Factor out invalid state detection
40f16a8 lib: sbi_hsm: Don't try to restore state on failed change
c88e039 lib: sbi_hsm: Ensure errors are consistent with spec
b1ae6ef lib: sbi_hsm: Move misplaced comment
07673fc lib: sbi_hsm: Remove unnecessary include
8a40306 lib: sbi_hsm: Export some functions
73623a0 lib: sbi: Add system suspend skeleton
c9917b6 lib: sbi: Add system_suspend_allowed domain property
7c964e2 lib: sbi: Implement system suspend
37558dc docs: Correct opensbi-domain property name
5ccebf0 platform: generic: Add system suspend test
908be1b gpio/starfive: add gpio driver and support gpio reset
4b28afc make: Add a command line option for debugging OpenSBI
e9d08bd lib: utils/i2c: Add minimal StarFive jh7110 I2C driver
568ea49 platform: starfive: add PMIC power ops in JH7110 visionfive2 board
506144f lib: serial: Cadence: Enable compatibility for cdns,uart-r1p8
1fe8dc9 lib: sbi_pmu: add callback for counter width
51951d9 lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi
60c358e lib: sbi_pmu: Reserve space for implementation specific firmware events
548e4b4 lib: sbi_pmu: Rename fw_counter_value
b51ddff lib: sbi_pmu: Update sbi_pmu dev ops
641d2e9 lib: sbi_pmu: Use dedicated event code for platform firmware events
57d3aa3 lib: sbi_pmu: Introduce fw_counter_write_value API
c631a7d lib: sbi_pmu: Add hartid parameter PMU device ops
d56049e lib: sbi: Refactor the calls to sbi_hart_switch_mode()
e8e9ed3 lib: sbi: Set the state of a hart to START_PENDING after the hart is ready
c6a092c lib: sbi: Clear IPIs before init_warm_startup in non-boot harts
ed88a63 lib: sbi_scratch: Optimize the alignment code for alloc size
73ab11d lib: sbi: Fix how to check whether the domain contains fw_region
f64dfcd lib: sbi: Introduce sbi_entry_count() function
30b9e7e lib: sbi_hsm: Fix sbi_hsm_hart_start() for platform with hart hotplug
8e90259 lib: sbi_hart: clear mip csr during hart init
45ba2b2 include: Add defines for SBI CPPC extension
33caae8 lib: sbi: Implement SBI CPPC extension
91767d0 lib: sbi: Print the CPPC device name
edc9914 lib: sbi_pmu: Align the event type offset as per SBI specification
ee016a7 docs: Correct FW_JUMP_FDT_ADDR calculation example
2868f26 lib: utils: fdt_fixup: avoid buffer overrun
66fa925 lib: sbi: Optimize sbi_tlb
24dde46 lib: sbi: Optimize sbi_ipi
80078ab sbi: tlb: Simplify to tlb_process_count/tlb_process function
bf40e07 lib: sbi: Optimize sbi_tlb queue waiting
eeab500 platform: generic: andes/renesas: Add SBI EXT to check for enabling IOCP errata
f692289 firmware: Optimize loading relocation type
e41dbb5 firmware: Change to use positive offset to access relocation entries
bdb3c42 lib: sbi: Do not clear active_events for cycle/instret when stopping
674e019 lib: sbi: Fix counter index calculation for SBI_PMU_CFG_FLAG_SKIP_MATCH
f5dfd99 lib: sbi: Don't check SBI error range for legacy console getchar
7919530 lib: sbi: Add debug print when sbi_pmu_init fails
4e33530 lib: sbi: Remove unnecessary semicolon
6bc02de lib: sbi: Simplify sbi_ipi_process remove goto
dc1c7db lib: sbi: Simplify BITS_PER_LONG definition
f58c140 lib: sbi: Introduce register_extensions extension callback
e307ba7 lib: sbi: Narrow vendor extension range
042f0c3 lib: sbi: pmu: Remove unnecessary probe function
8b952d4 lib: sbi: Only register available extensions
767b5fc lib: sbi: Optimize probe of srst/susp
c3e31cb lib: sbi: Remove 0/1 probe implementations
33f1722 lib: sbi: Document sbi_ecall_extension members
d4c46e0 Makefile: Dereference symlinks on install
8b99a7f lib: sbi: Fix return of sbi_console_init
264d0be lib: utils: Improve fdt_serial_init
9a0bdd0 lib: utils: Improve fdt_ipi
122f226 lib: utils: Improve fdt_timer
df75e09 lib: utils/ipi: buffer overrun aclint_mswi_cold_init
bdde2ec lib: sbi: Align system suspend errors with spec
aad7a37 include: sbi_scratch: Add helper macros to access data type
5cf9a54 platform: Allow platforms to specify heap size
40d36a6 lib: sbi: Introduce simple heap allocator
2a04f70 lib: sbi: Print scratch size and usage at boot time
bbff53f lib: sbi_pmu: Use heap for per-HART PMU state
ef4542d lib: sbi: Use heap for root domain creation
66daafe lib: sbi: Use scratch space to save per-HART domain pointer
fa5ad2e lib: utils/gpio: Use heap in SiFive and StartFive GPIO drivers
903e88c lib: utils/i2c: Use heap in DesignWare and SiFive I2C drivers
5a8cfcd lib: utils/ipi: Use heap in ACLINT MSWI driver
3013716 lib: utils/irqchip: Use heap in PLIC, APLIC and IMSIC drivers
7e5636a lib: utils/timer: Use heap in ACLINT MTIMER driver
3c1c972 lib: utils/fdt: Use heap in FDT domain parsing
acbd8fc lib: utils/ipi: Use scratch space to save per-HART MSWI pointer
f0516be lib: utils/timer: Use scratch space to save per-HART MTIMER pointer
b3594ac lib: utils/irqchip: Use scratch space to save per-HART PLIC pointer
1df52fa lib: utils/irqchip: Don't check hartid in imsic_update_hartid_table()
355796c lib: utils/irqchip: Use scratch space to save per-HART IMSIC pointer
524feec docs: Add OpenSBI logo and use it in the top-level README.md
932be2c README.md: Improve project copyright information
8153b26 platform/lib: Set no-map attribute on all PMP regions
d64942f firmware: Fix find hart index
27c957a lib: reset: Move fdt_reset_init into generic_early_init
8bd666a lib: sbi: check A2 register in ecall_dbcn_handler.
2552799 include: Bump-up version to 1.3
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-1-bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Signed-off-by: Helge Deller <deller@gmx.de>
Update SeaBIOS-hppa to version 7 which fixes a boot problem
with Debian-12 install CD images.
The problem with Debian-12 is, that the ramdisc got bigger
than what the firmware could load in one call to the LSI
scsi driver.
Signed-off-by: Helge Deller <deller@gmx.de>
Remove Makefile.edk2 and the edk2*.sh scripts and replace them
with a python script (which already handles fedora rpm builds)
and a config file for it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
git shortlog rel-1.16.1..rel-1.16.2
-----------------------------------
David Woodhouse (1):
xen: require Xen info structure at 0x1000 to detect Xen
Qi Zhou (1):
usb: fix wrong init of keyboard/mouse's if first interface is not boot protocol
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
git shortlog rel-1.16.0..rel-1.16.1
===================================
Gerd Hoffmann (3):
malloc: use variable for ZoneHigh size
malloc: use large ZoneHigh when there is enough memory
virtio-blk: use larger default request size
Igor Mammedov (1):
acpi: parse Alias object
Volker Rümelin (2):
pci: refactor the pci_config_*() functions
reset: force standard PCI configuration access
Xiaofei Lee (1):
virtio-blk: Fix incorrect type conversion in virtio_blk_op()
Xuan Zhuo (2):
virtio-mmio: read/write the hi 32 features for mmio
virtio: finalize features before using device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Include patch "Place setup_data at location specified by host"
from Jason A. Donenfeld.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upgrade OpenSBI from v1.0 to v1.1 and the pre-built bios images.
The v1.1 release includes the following commits:
5b99603 lib: utils/ipi: Fix size check in aclint_mswi_cold_init()
6dde435 lib: utils/sys: Extend HTIF library to allow custom base address
8257262 platform: sifive_fu740: do not use a global in da9063_reset/shutdown
fb688d9 platform: sifive_fu740: fix reset when watchdog is running
5d025eb lib: fix pointer of type 'void *' used in arithmetic
632f593 lib: sbi: Map only the counters enabled in hardware
3b7c204 lib: sbi: Disable interrupt during config matching
a26dc60 lib: sbi: Disable interrupt and inhibit counting in M-mode during init
5d53b55 Makefile: fix build with binutils 2.38
6ad8917 lib: fix compilation when strings.h is included
ce4c018 lib: utils/serial: Round UART8250 baud rate divisor to nearest integer
01250d0 include: sbi: Add AIA related CSR defines
8f96070 lib: sbi: Detect AIA CSRs at boot-time
65b4c7c lib: sbi: Use AIA CSRs for local interrupts when available
222132f lib: sbi: Add sbi_trap_set_external_irqfn() API
5f56314 lib: utils/irqchip: Allow multiple FDT irqchip drivers
1050940 include: sbi: Introduce nascent_init() platform callback
55e79f8 lib: sbi: Enable mie.MEIE bit for IPIs based on external interrupts.
9f73669 lib: utils/irqchip: Add IMSIC library
811da5c lib: utils/irqchip: Add FDT based driver for IMSIC
7127aaa lib: utils: Disable appropriate IMSIC DT nodes in fdt_fixups()
9979265 lib: utils/irqchip: Add APLIC initialization library
3461219 lib: utils/irqchip: Add FDT based driver for APLIC
8e2ef4f lib: utils: Disable appropriate APLIC DT nodes in fdt_fixups()
3a69cc1 lib: sbi: fix typo in is_region_subset
f2ccf2f lib: sbi: verbose sbi_domain_root_add_memregion
f3f4604 lib: sbi: Add a simple external interrupt handling framework
4998a71 lib: utils: serial: Initial commit of xlnx-uartlite
2dfbd3c lib: pmp_set/pmp_get moved errors from runtime to compile time
b6b7220 firmware: Fix code for accessing hart_count and stack_size
d552fc8 lib: Add error messages via conditional compilation for the future
555bdb1 include: Use static asserts for SBI_PLATFORM_xxx_OFFSET defines
1b42d3a include: Use static asserts for SBI_SCRATCH_xxx_OFFSET defines
7924a0b include: Use static asserts for FW_DYNAMIC_INFO_xxx_OFFSET defines
722f80d include: Add defines for [m|h|s]envcfg CSRs
31fecad lib: sbi: Detect menvcfg CSR at boot time
47d6765 lib: sbi: Enable Zicbo[m|z] extensions in the menvcfg CSR
794986f lib: sbi: Enable Svpbmt extension in the menvcfg CSR
499601a lib: sbi: Add Smstateen extension defines
d44568a lib: sbi: Detect Smstateen CSRs at boot-time
3383d6a lib: irqchip/imsic: configure mstateen
5c5cbb5 lib: utils/serial: support 'reg-offset' property
c1e47d0 include: correct the definition of MSTATUS_VS
9cd95e1 lib: sbi/hart: preserve csr validation value
4035ae9 docs: pmu: Improve the PMU DT bindings
d62f6da lib: sbi: Implement Sstc extension
474a9d4 lib: sbi: Fix mstatus_init() for RV32 when Sscofpmf is not available
e576b3e include: sbi: Define SBI_PMU_HW_EVENT_MAX to 256
b0c9df5 lib: sbi: Fix mhpmeventh access for rv32 in absence of sscofpmf
1a754bb lib: sbi: Detect and print privileged spec version
5a6be99 lib: sbi: Remove 's' and 'u' from misa_string() output
5b8b377 lib: sbi: Update the name of ISA string printed at boot time
d4b563c lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features
dbc3d8f lib: sbi: Remove MCOUNTINHIBT hart feature
97a17c2 lib: sbi: Remove MENVCFG hart feature
a6ab94f lib: sbi: Fix AIA feature detection
cad6c91 lib: sbi: Convert hart features into hart extensions
be4903a lib: sbi: Detect hart features only once for each hart
994ace3 lib: sbi: Add sbi_hart_update_extension() function
023f0ad lib: sbi_platform: Add callback to populate HART extensions
f726f2d Makefile: Allow generated C source to be anywhere in build directory
7fb474b Makefile: Add support for generating C array at compile time
73cf511 lib: utils/reset: Generate FDT reset driver list at compile-time
1e62705 lib: utils/serial: Generate FDT serial driver list at compile-time
bfeb305 lib: utils/timer: Generate FDT timer driver list at compile-time
3a69d12 lib: utils/irqchip: Generate FDT irqchip driver list at compile-time
4ee0c57 lib: utils/ipi: Generate FDT ipi driver list at compile-time
998ed43 lib: utils/i2c: Generate FDT i2c adapter driver list at compile-time
4eacd82 lib: utils/gpio: Generate FDT gpio driver list at compile-time
a3a3c60 platform: generic: Generate platform override module list at compile-time
9a7a677 platform: generic: Move Sifive platform overrides into own directory
851c14d lib: utils/irqchip: fix typo when checking for CPU node
90a9dd2 lib: utils/fdt: introduce fdt_node_is_enabled()
616da52 lib: utils: check if CPU node is enabled
575bb4e platform: generic: check if CPU node is enabled
1bc67db lib: utils/fdt: rename fdt_parse_max_hart_id
f067bb8 lib: sbi: fix system_opcode_insn
fab0379 lib: utils/fdt: Require match data to be const
295e5f3 lib: sbi_timer: Drop unnecessary get_platform_ticks wrapper
ff65bfe lib: sbi_illegal_insn: Constify illegal_insn_table
cb8271c lib: sbi_illegal_insn: Add emulation for fence.tso
adc3388 lib: sbi_trap: Redirect exception based on hedeleg
ce1d618 platform: generic: add overrides for vendor extensions
b20ed9f lib: sbi_hsm: Call a device hook during hart resume
79e42eb lib: sbi_hsm: Assume a consistent resume address
2ea7799 lib: irqchip/plic: Constify plic_data pointers
8c362e7 lib: irqchip/plic: Factor out a context init function
415ecf2 lib: irqchip/plic: Add context save/restore helpers
2b79b69 lib: irqchip/plic: Add priority save/restore helpers
69be3df lib: utils/irqchip: Add FDT wrappers for PLIC save/restore functions
5e56758 lib: utils/irqchip: Add wrapper for T-HEAD PLIC delegation
9dc5ec5 platform: Add HSM implementation for Allwinner D1
551c70c include: sbi: Add mtinst/htinst psuedoinstructions
187127f lib: sbi: Fixup tinst for exceptions in sbi_misaligned_*()
a07402a lib: sbi: Fix tval and tinst for sbi_get_insn()
c653001 lib: utils: Remove CSRs that set/clear an IMSIC interrupt file bits
7738345 lib: utils/timer: Add a separate compatible for the D1 CLINT
d76a196 lib: irqchip/plic: fix typo in plic_warm_irqchip_init
6f1fe98 lib: utils/timer: Remove Allwinner D1 CLINT compatibles
c6fdbcf include: sbi: Change spec version to 1.0
3f66465 lib: pmu: allow to use the highest available counter
4489876 include: Bump-up version to 1.1
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220713090613.204046-1-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The only change is that now SLOF can also boot big endian zImage
but kernel-addr=0 is still required.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Staring with SEABIOS_HPPA_VERSION 6 the serial ports are now emulated as
on physical hardware, with LASI UART being serial port #0 and DINO UART
as serial port #1. On older versions those ports were swapped.
This SeaBIOS-hppa fix is needed to allow fixing the qemu serial
pass-through from host to guest.
Signed-off-by: Helge Deller <deller@gmx.de>
New features and fixes in SeaBIOS for hppa/parisc:
* STI firmware now contains additional fonts built-in, which
can be selected with qemu command-line options:
-fw_cfg opt/font,string=1 - a HP 8x16 font
-fw_cfg opt/font,string=2 - a HP 6x13 font
-fw_cfg opt/font,string=3 - a HP 10x20 font
-fw_cfg opt/font,string=4 - a Linux 16x32 font
* Fixed PS/2 keyboard emulation when running in graphical mode.
This allows to type boot commands in the firmware boot menu if
qemu was started with "-boot menu=on" (and no linux kernel was
given on the qemu command line).
* Fix firmware rendenzvous code to clear all pending external intrrupts
before entering the waiting loop.
Signed-off-by: Helge Deller <deller@gmx.de>
This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and
binutils 2.38.
Changes since the previous version:
Christophe Lombard (15):
npu2: move opal api
pau: introduce support
rainier: detect pau devices
pau: assign bars
pau: create phb
pau: enabling opencapi
pau: translation layer configuration
pau: enable interrupt on error
pau: complete phb ops
pau: hmi scom dump
pau: phy init
pau: link training
pau: update current opal call functions
pau: mmio invalidates
pau: Add support for OpenCAPI Persistent Memory devices.
Cédric Le Goater (4):
xive/p10: Fix xive_special_cache_check when DEBUG=1
xive/p10: Fix mismatch errors when DEBUG=1
interrupts: Do not advertise XICS support on P10
skiboot v6.6.6 release notes
Frederic Barrat (6):
phb4/5: Escalate page-level TCE kills
npu3: Remove GPU support on Swift
phb5: Remove obsolete capp-related properties
xive/p10:: Declare xive2 DT node as an interrupt-controller
skiboot v6.0.24 release notes
opal-api: Drop diagnostics data type symbol for PHB5
Michael Ellerman (3):
external/mambo: Print more info when the kernel is too big
doc: Make it clear all existing platforms use Power9N
docs: Add Swift, Mowgli & Rainier
Nicholas Piggin (12):
external/mambo: Updates for POWER10 configuration for DD2.0
external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC
external/mambo: Add POWER10 small-core mode
HBRT: fix clobbered r16 when host services handlers are called
interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo
cpu: cpu_idle_job SMT priority fix
cpu: add debug check in cpu_relax
asm/head: Fix P10 HILE for little endian build
phb4: annotate tbl_pest with endian types
Remove support for POWER8 DD1
phb3: make endian-clean
flash: AST BMC endian fixes
Nick Child (1):
secvar: Free md context on hash error
Ryan Grimm (1):
AWAN simulator support for P10
Vasant Hegde (5):
ci: Bump qemu version
hello_world: Add p10 mambo tests
skiboot v6.7.3 release notes
skiboot v6.8.1 release notes
skiboot v7.0 release notes
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
git shortlog 6a62e0cb0dfe..rel-1.16.0
-------------------------------------
Florian Larysch (1):
nvme: fix LBA format data structure
Jan Beulich via SeaBIOS (1):
nvme: avoid use-after-free in nvme_controller_enable()
Kevin O'Connor (9):
smm: Suppress gcc array-bounds warnings
nvme: Rework nvme_io_readwrite() to return -1 on error
nvme: Add nvme_bounce_xfer() helper function
nvme: Convert nvme_build_prpl() to nvme_prpl_xfer()
nvme: Pass prp1 and prp2 directly to nvme_io_xfer()
nvme: Build the page list in the existing dma buffer
nvme: Only allocate one dma bounce buffer for all nvme drives
sercon: Fix missing GET_LOW() to access rx_bytes
docs: Note v1.16.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New firmware features and fixes:
* Allow up to 16 CPUs
* Add TOC button support:
To trigger a TOC, execute "nmi" in the qemu monitor (Ctrl-A C)
* New opt/hostid fw_cfg option to change hostid:
-fw_cfg opt/hostid,string=334455
* Add opt/console fw_cfg option to select default console:
-fw_cfg opt/console,string=serial
-fw_cfg opt/console,string=graphics
* Add Linux TER16x32 font to STI firmware:
-fw_cfg opt/font,string=2
* Leave IRQs disabled after rendevouz
Signed-off-by: Helge Deller <deller@gmx.de>
Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Most important update is smbios3 support being added, this update should
help getting the qemu side of things (flip to smbios3 by default for new
machine types) merged and tested.
Not fully clear yet when the next 1.16 seabios version will be released,
but it should be no later than end of February so we can pick it up for
qemu 7.0.
full shortlog
=============
Andy Pei (3):
virtio-blk: add feature VIRTIO_BLK_F_SIZE_MAX and VIRTIO_BLK_F_SEG_MAX
virtio-blk: abstract a function named virtio_blk_op_one_segment to handle r/w request
virtio-blk: split large IO according to size_max
Eduardo Habkost (19):
biostables: copy_fseg_table() function
util.h: Delete unused get_smbios_entry_point() prototype
smbios: Rename code specific for SMBIOS 2.1 entry points
smbios: Generic smbios_next() function
smbios: smbios_get_tables() function
smbios: Use smbios_get_tables()/smbios_next() at display_uuid()
smbios: smbios_major_version()/smbios_minor_version() helpers
tpm: Use smbios_get_tables()
csm: Don't check SMBios21Addr before calling copy_smbios_21()
smbios: Make SMBios21Addr variable static
smbios: Use smbios_next() at smbios_romfile_setup()
smbios: Extract SMBIOS table building code to separate function
smbios: Make smbios_build_tables() more generic
smbios: smbios_21_setup_entry_point() function
smbios: Make some smbios_build_tables() arguments optional
smbios: Make smbios_build_tables() ready for 64-bit tables
smbios: copy_smbios_30() function
smbios: Support SMBIOS 3.0 entry point at copy_table()
smbios: Support SMBIOS 3.0 entry point at smbios_romfile_setup()
Gerd Hoffmann (1):
svgamodes: add standard 4k modes
Igor Mammedov (2):
pci: reserve resources for pcie-pci-bridge to fix regressed hotplug on q35
pci: let firmware reserve IO for pcie-pci-bridge
Kevin O'Connor (4):
vgasrc: Don't use VAR16 in header files to fix gcc warning
memmap: Fix gcc out-of-bounds warning
readserial: Improve Python3 compatibility
scripts: Remove python23compat.py
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Update seabios to the final release. No code changes
compared to the snapshot merged a few weeks ago.
shortlog 64f37cc530f1..rel-1.15.0
---------------------------------
Kevin O'Connor (1):
docs: Note v1.15.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This has really just one fix from Stefan, the rest is housekeeping.
The full changelog is:
Alexey Kardashevskiy (3):
Revert "make: Define default rule for .c when V=1 or V=2"
js2x: Fix compile and cleanup
version: update to 20211112
Stefan Berger (1):
tcgbios: Disable platform hierarchy in case of failure
Thomas Huth (8):
Mention the CR vs. LF problem in the documentation
slof/fs/accept: Replace TABs with spaces
Fix the URL to the Linux kernel coding style
lib/libc/README.txt: Fix "cannel" typo
travis.yml: Fix keywords
travis.yml: Update to Focal Fossa
travis.yml: Compile-test the qemu build
Silence some trivial compiler warning in the js2x code
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
A new seabios release is planned for november.
Update to a master branch snapshot, to
(a) increase test coverage of the changes.
(b) make the delta smaller when updating to the final
release during the qemu 6.2 freeze.
Most noteworthy this fixes the nvme boot regression caused
by adding namespace support to the qemu nvme emulation.
seabios shortlog
================
Alex Martens via SeaBIOS (1):
nvme: fix missing newline on sq full print
Alexander Graf (4):
nvme: Record maximum allowed request size
nvme: Allow to set PRP2
nvme: Pass large I/O requests as PRP lists
nvme: Split requests by maximum allowed size
Daniel P. Berrangé (1):
smbios: avoid integer overflow when adding SMBIOS type 0 table
David Woodhouse (1):
nvme: Clean up nvme_cmd_readwrite()
Gerd Hoffmann (9):
output: add support for uppercase hex numbers
dsdt: add support for pnp ids as strings
usb: add boot prio support for mmio host adapters
usb/xhci: split xhci setup into generic and pci parts
usb/xhci: add support for mmio host adapters (via acpi).
usb boot: add xhci mmio example
nvme: improve namespace allocation
nvme: drive desc should not include the newline
Increase BUILD_MIN_BIOSTABLE for large roms
Matt DeVillier (1):
usb.c: Fix devices using non-primary interface descriptor
Mike Banon (1):
Support booting USB drives with a write protect switch enabled
Sergei Trofimovich (1):
vgasrc: ignore .node.gnu.property (binutils-2.36 support)
Stefan Berger (4):
tcgbios: Fix details in log entries
Add implementations for sha256, sha384, and sha512
tcgbios: Use The proper sha function for each PCR bank
tcgbios: Disable platform hierarchy in case of failure
Stefan Ott via SeaBIOS (1):
usb-hid: Increase MAX_KBD_EVENT
Volker Rümelin (2):
stacks: call check_irqs() in run_thread()
stacks: call check_irqs() after switch_next()
weitaowang-oc@zhaoxin.com (1):
USB:Fix xHCI initail fail by using longer reset and CNR clear timeout value
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The EDK2 firmware images built to test QEMU do not require
the following submodules:
- MdeModulePkg/Universal/RegularExpressionDxe/oniguruma
- UnitTestFrameworkPkg/Library/CmockaLib/cmocka
The only submodules required are:
- ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3
- BaseTools/Source/C/BrotliCompress/brotli
- CryptoPkg/Library/OpensslLib/openssl
- MdeModulePkg/Library/BrotliCustomDecompressLib/brotli
Adapt the buildsys machinery to only initialize the required
submodules.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211018105816.2663195-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since EDK2 BaseTools only require the brotli submodule,
we don't need to initialize other submodules to build it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211018105816.2663195-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update SeaBIOS to seabios-hppa-v2
Changes in seabios-hppa:
* Include all latest upstream SeaBIOS patches
* add support for the qemu "bootindex" parameter
* add support for the qemu "-boot order=g-m" parameter to choose
SCSI ID
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <YU4st/zcLcg6RKNn@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
