Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I noticed that in hw/ide/ahci:ahci_dma_rw_buf() we do not free the sglist. Thus,
I've added a call to qemu_sglist_destroy() to fix this memory leak.
In addition, I've adeed a call in qemu_sglist_destroy() to 0 all of the sglist
fields, in case there is some other codepath that tries to free the sglist.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing q35, which has its cdrom attached to the ahci controller, I found
that the Fedora 17 install would panic on boot. The panic occurs while
squashfs is trying to read from the cdrom. The errors are:
[ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 8.625180] SQUASHFS error: squashfs_read_data failed to read block
0x20be48a
I was also able to produce corrupt data reads using an installed piix based
qemu machine, using 'dd'. I found that the corruptions were only occuring when
then read size was greater than 128k. For example, the following command
results in corrupted reads:
dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct
The > 128k size reads exercise a different code path than 128k and below. In
ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus,
ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k.
However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k.
Thus, resulting in a corrupted read.
To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep
track of the offset. I've also modified ahci_populate_sglist() to take a new
3rd offset argument, so that the sglist is property initialized.
I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots
and installs on q35 with the cdrom ahci controller.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scsi passthrough handler falls through after completing a
request into the failure path, resulting in a use after free.
Reproducible by running a guest with aio=native on a block device.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A command line device probe using just -device "?" gets processed
after qemu-kvm initializes the accelerator. If /dev/kvm is not
present, the accelerator check will fail (kvm is defaulted to on),
which causes libvirt to not be set up to handle qemu guests.
Moving the device help handling before the accelerator set up allows
the device probe to work in this configuration and libvirt succeeds
in setting up for a qemu hypervisor mode.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
qemu_rearm_alarm_timer partially duplicates the code in
qemu_next_alarm_deadline to figure out if it needs to rearm the timer.
If it calls qemu_next_alarm_deadline, it always rearms the timer even if
the next deadline is INT64_MAX.
This patch simplifies the behavior of qemu_rearm_alarm_timer and removes
the duplicated code, always calling qemu_next_alarm_deadline and only
rearming the timer if the deadline is less than INT64_MAX.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes the following error:
$ qemu-system-xtensa -cpu help
Segmentation fault
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:
$ qemu-system-xtensaeb -M sim
Unable to find CPU definition
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This change addresses a problem where QEMU incorrectly traps on
floating-point MADD group instructions with SIGILL, at least while
emulating MIPS32r2 processors. These instructions use the COP1X major
opcode and include ones like:
madd.d $f2,$f4,$f2,$f6
Here's Nathan's original analysis of the problem:
"QEMU essentially does:
d = find_cpu (cpu_string) // get CPU definition
fpu_init (env, d) // initialize fpu state (init FCR0, basically)
cpu_reset (env)
...and the cpu_reset call clears all interesting state that fpu_init
setup, then proceeds to reinitialize all the CP0 registers...but not
FCR0."
I have verified this change with system emulation running the GDB test
suite for the mips-sde-elf target (o32, big endian, 24Kf CPU emulated),
there were 55 progressions and no regressions.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
LOAD_UNLOAD and START_STOP have same value, so the table
entry is initialized twice. Spotted by Clang compiler.
Remove LOAD_UNLOAD entry since START_STOP entry already
represents both.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.
Fix with #ifdeffery and by using other variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.
Prefix C keywords with "q_", adjust SLIRP accordingly.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.
Rearrange code to fix order. Always create the TC line.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.
This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 0883c5159f.
Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The unmap command can reuse the same infrastructure as MODE SELECT
for reading the descriptor list into memory. The descriptors are
processed sequentially.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leaving the aiocb to a non-NULL value leads to an assertion failure when
rerror/werror are set to stop or enospc, and the operation is retried.
scsi-disk checks that the aiocb member is NULL before filling it.
This patch correctly resets the aiocb to NULL values everywhere,
and adds the dual assertion that the aiocb was non-NULL before
calling bdrv_acct_done.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we've cleared out the architecture-independent uses of
kvm_irqchip_in_kernel(), we can add a doc comment describing
what it means.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Don't assume having an in-kernel irqchip means that GSI
routing is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Decouple another x86-specific assumption about what irqchips imply.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of assuming that we can use irqfds if and only if
kvm_irqchip_in_kernel(), add a bool to the KVMState which
indicates this, and is set only on x86 and only if the
irqchip is in the kernel.
The kernel documentation implies that the only thing
you need to use KVM_IRQFD is that KVM_CAP_IRQFD is
advertised, but this seems to be untrue. In particular
the kernel does not (alas) return a sensible error if you
try to set up an irqfd when you haven't created an irqchip.
If it did we could remove all this nonsense and let the
kernel return the error code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_allows_irq0_override() is a totally x86 specific concept:
move it to the target-specific source file where it belongs.
This means we need a new header file for the prototype:
kvm_i386.h, in line with the existing kvm_ppc.h.
While we are moving it, fix the return type to be 'bool' rather
than 'int'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Rename the function kvm_irqchip_set_irq() to kvm_set_irq(),
since it can be used for sending (asynchronous) interrupts whether
there is a full irqchip model in the kernel or not. (We don't
include 'async' in the function name since asynchronous is the
normal case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
On x86 userspace delivers interrupts to the kernel asynchronously
(and therefore VCPU idle management is done in the kernel) if and
only if there is an in-kernel irqchip. On other architectures this
isn't necessarily true (they may always send interrupts
asynchronously), so define a new kvm_async_interrupts_enabled()
function instead of misusing kvm_irqchip_in_kernel().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
The code creating the symlink from linux-headers/asm to the
architecture specific linux-headers/asm-$arch directory was
implicitly hardcoding a list of KVM supporting architectures.
Add a default case for the common "Linux architecture name and
QEMU CPU name match" case, so future architectures will only
need to add code if they've managed to get mismatched names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a helper function for fetching max cpus supported by kvm.
Make QEMU exit with an error message if smp_cpus exceeds limit
of VCPU count retrieved by invoking this helper function.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes a problem in handling task management functions
in virtio-scsi. The cause of the problem is a mismatch between
the size of the tag in QEMU (32-bit) and virtio-scsi (64-bit).
Changing the QEMU size is hard because the migration format
uses 32 bits to store the tag; so just don't use the QEMU tag
(virtio-scsi only uses the tag for task management functions
anyway) and look up the full 64-bit tag in the hba_private field.
The reproducer is a bit obscure. If you cause an I/O timeout
(for example with rerror=stop and doing 'cont' on the monitor
continuously without fixing the error), sooner or later the
guest will try to abort the command and reissue it. At this
point, QEMU will report _two_ errors instead of one when you
hit 'c', because the first error has not been canceled correctly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The argument of iscsi_create_context is never freed by libiscsi,
which in fact calls strdup on it. Avoid a leak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the outgoing migration check to see if the page is cached and
changed, then send compressed page by using save_xbrle_page function.
In the incoming migration check to see if RAM_SAVE_FLAG_XBZRLE is set
and decompress the page (by using load_xbrle function).
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For performance we are encoding long word at a time.
For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp():
using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test
to find out if any byte in the long word is zero.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini
Kevin Wolf
Jason Baron
Avi Kivity
Bruce Rogers
Blue Swirl
Stefano Stabellini
Max Filippov
Nathan Froyd
Hervé Poussineau
Peter Maydell
Dunrong Huang
Ronnie Sahlberg
Juan Quintela
Orit Wasserman
Anthony Liguori