It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.
get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.
This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-img info should use the same logic as qemu when printing the
backing file path, or debugging becomes quite tricky. We can also
simplify the output in case the backing file has an absolute path
or a protocol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_close should leave fields in the same state as bdrv_new. It is
not up to bdrv_open_common to fix the mess.
Also, backing_format was not being re-initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
path_has_protocol will erroneously return "true" if the colon is part
of a filename. These names are common with stable device names produced
by udev. We cannot fully protect against this in case the filename
does not have a path component (e.g. if the current directory is
/dev/disk/by-path), but in the common case there will be a slash before
and path_has_protocol can easily detect that and return false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Windows, all the logic is already in is_windows_drive and
is_windows_drive_prefix. On POSIX, there is no need to look
out for colons.
The win32 code changes the behaviour in some cases, we could have
something like "d:foo.img". The old code would treat it as relative
path, the new one as absolute. Now the path is absolute, because to
go from c:/program files/blah to d:foo.img you cannot say c:/program
files/blah/d:foo.img. You have to say d:foo.img. But you could also
say it's relative because (I think, at least it was like that in DOS
15 years ago) d:foo.img is relative to the current path of drive D.
Considering how path_is_absolute is used by path_combine, I think it's
better to treat it as absolute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limitation on not having I/O after cancellation cannot really be
kept. Even streaming has a very small race window where you could
cancel a job and have it report completion. If this window is hit,
bdrv_change_backing_file() will yield and possibly cause accesses to
dangling pointers etc.
So, let's just assume that we cannot know exactly what will happen
after the coroutine has set busy to false. We can set a very lax
condition:
- if we cancel the job, the coroutine won't set it to false again
(and hence will not call co_sleep_ns again).
- block_job_cancel_sync will wait for the coroutine to exit, which
pretty much ensures no race.
Instead, we track the coroutine that executes the job and put very
strict conditions on what to do while it is quiescent (busy = false).
First of all, the coroutine must never set busy = false while the job
has been cancelled. Second, the coroutine can be reentered arbitrarily
while it is quiescent, so you cannot really do anything but co_sleep_ns at
that time. This condition is obeyed by the block_job_sleep_ns function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function abstracts the pretty complex semantics of the "busy"
member of BlockJob.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are reusing bs->file across close/open, which may not cause any
known bugs but is a recipe for trouble. Prefer bdrv_delete, and
enjoy the new invariant in the implementation of bdrv_delete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is another bug caused by not doing a full cleanup of the BDS
across close/open. This was found with mirroring by Shaolong Hu,
but it can probably be reproduced also with eject or change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_append must also copy open_flags to the top, because the snapshot
has BDRV_O_NO_BACKING set. This causes interesting results if you
later use drive-reopen (not upstream) to reopen the image, and lose
the backing file in the process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED's opaque data includes a pointer back to the BlockDriverState.
This breaks when bdrv_append shuffles data between bs_new and bs_top.
To avoid this, add a "rebind" function that tells the driver about
the new relationship between the BlockDriverState and its opaque.
The patch also adds rebind to VVFAT for completeness, even though
it is not used with live snapshots.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also reuse elsewhere the new constant for sizeof(unsigned long) * 8.
The dirty bitmap is allocated in bits but declared as unsigned long.
Thus, its memory block is accessed beyond its end unless the image
is a multiple of 64 chunks (i.e. a multiple of 64 MB).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_img_create will temporarily open the backing file to probe its size.
However, this could be done with a read-write open if the wrong flags are
passed to bdrv_img_create. Since there is really no documentation on
what flags can be passed, assume that bdrv_img_create receives the flags
with which the new image will be opened; sanitize them when opening
the backing file.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are needed to print "info block" output correctly. QCOW2 does this
because it needs it to write the header, but QED does not, and common code
is the right place to do it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This check applies to all drivers, but QED lacks it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
[ Iterate until all block devices have processed all requests,
add comments. - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current qemu.git introduces failure with preallocation and some
sizes:
qemu-img create -f qcow2 new.img 976563K -o preallocation=metadata
qemu-img: qemu-coroutine-lock.c:111: qemu_co_mutex_unlock: Assertion
`mutex->locked == 1' failed.
And lock needs to work in coroutine context. So to fix this issue, we
need to make bdrv_create adopt coroutine at first.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions. This is ugly because the Error
should be created at the point where we still have all the relevant
information. More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.
Go ahead and use Error directly and don't convert later.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The 'qemu-img convert -h' advertise that the default cache mode is
'writeback', while in fact it is 'unsafe'.
This patch 1) fix the help manual and 2) let bdrv_close() call bdrv_flush()
2) is needed because some backend storage doesn't have a self-flush
mechanism(for e.g., sheepdog), so we need to call bdrv_flush() to make
sure the image is really writen to the storage instead of hanging around
writeback cache forever.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an AIO request is in flight that refers to a BlockDriverState that
has been closed and possibly even freed, more or less anything could
happen. I have seen segfaults, -EBADF return values and qcow2 sometimes
actually catches the situation in bdrv_close() and abort()s.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This function will clear all BDRV_O_INCOMING flags.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few fixups for bdrv_append():
The new bs (bs_new) passed into bdrv_append() should be anonymous. Rather
than call bdrv_make_anon() to enforce this, use an assert to catch when a caller
is passing in a bs_new that is not anonymous.
Also, the new top layer should have its backing_format reflect the original
top's format.
And last, after the swap of bs contents, the device_name will have been copied
down. This needs to be cleared to reflect the anonymity of the bs that was
pushed down.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to do this in every implementation of set_speed
(even though there is only one right now).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Streaming can issue I/O while qcow2_close is running. This causes the
L2 caches to become very confused or, alternatively, could cause a
segfault when the streaming coroutine is reentered after closing its
block device. The fix is to cancel streaming jobs when closing their
underlying device.
The cancellation must be synchronous, on the other hand qemu_aio_wait
will not restart a coroutine that is sleeping in co_sleep. So add
a flag saying whether streaming has in-flight I/O. If the busy flag
is false, the coroutine is quiescent and, when cancelled, will not
issue any new I/O.
This protects streaming against closing, but not against deleting.
We have a reference count protecting us against concurrent deletion,
but I still added an assertion to ensure nothing bad happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Monitor operations that manipulate image files must not execute while a
background job (like image streaming) is in progress. This prevents
corruptions from happening when two pieces of code are manipulating the
image file without knowledge of each other.
The monitor "commit" command raises QERR_DEVICE_IN_USE when
bdrv_commit() returns -EBUSY but "commit all" has no error handling.
This is easy to fix, although note that we do not deliver a detailed
error about which device was busy in the "commit all" case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies must be read at a specific transfer rate, depending of its own format.
Update floppy description table to include required transfer rate.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's emitted whenever the tray is moved by the guest or by HMP/QMP
commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
They are QMP events, not monitor events. Rename them accordingly.
Also, move bdrv_emit_qmp_error_event() up in the file. A new event will
be added soon and it's good to have them next each other.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Copy-on-Read populates the image file with data read from a backing
image. In order to avoid bloating the image file when all zeroes are
read we should scan the buffer and perform an optimized zero write
operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.
Image formats may support an optimized metadata representation instead
of writing zeroes into the image file. This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.
The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.
Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate. That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id,
traverse the backing image chain to locate the id.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously copy-on-read could only be enabled for all requests to a
block device. This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.
For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image. Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.
Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests. Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Long-running block operations like block migration and image streaming
must have continual access to their block device. It is not safe to
perform operations like hotplug, eject, change, resize, commit, or
external snapshot while a long-running operation is in progress.
This patch adds the missing bdrv_in_use() checks so that block migration
and image streaming never have the rug pulled out from underneath them.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity is confused by this "if" and reports leaks on acb->bh.
The bottom half is always deleted before releasing the AIOCB,
in either bdrv_aio_cancel_em or bdrv_aio_bh_cb.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that early failure of bdrv_aio_writev is not possible anymore,
mcb->num_requests can be set before the loop starts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Debugging a reentrant request deadlock was fun but in the future we need
a quick and obvious way of detecting such bugs. Add an assert that
checks we are not about to deadlock when waiting for another request.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cases beyond the end of the disk image are only implemented for block
drivers that do not provide .bdrv_co_is_allocated(). It's worth making
these cases generic so that block drivers that do implement
.bdrv_co_is_allocated() also get them for free.
Suggested-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Detect overlapping requests and remember to align to cluster boundaries
if the image format uses them. This assumes that allocating I/O is
performed in cluster granularity - which is true for qcow2, qed, etc.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When copy-on-read is enabled it is necessary to wait for overlapping
requests before issuing new requests. This prevents races between the
copy-on-read and a write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can
be used to programmatically enable or disable copy-on-read for a block
device. Later patches add the actual copy-on-read logic.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer does not know about pending requests. This information
is necessary for copy-on-read since overlapping requests must be
serialized to prevent races that corrupt the image.
The BlockDriverState gets a new tracked_request list field which
contains all pending requests. Each request is a BdrvTrackedRequest
record with sector_num, nb_sectors, and is_write fields.
Note that request tracking is always enabled but hopefully this extra
work is so small that it doesn't justify adding an enable/disable flag.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces the public bdrv_co_is_allocated() interface which
can be used to query image allocation status while the VM is running.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all block drivers have been converted to
.bdrv_co_is_allocated() we can drop .bdrv_is_allocated().
Note that the public bdrv_is_allocated() interface is still available
but is in fact a synchronous wrapper around .bdrv_co_is_allocated().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the .bdrv_co_is_allocated() interface which is identical
to .bdrv_is_allocated() but runs in coroutine context. Running in
coroutine context implies that other coroutines might be performing I/O
at the same time. Therefore it must be safe to run while the following
BlockDriver functions are in-flight:
.bdrv_co_readv()
.bdrv_co_writev()
.bdrv_co_flush()
.bdrv_co_is_allocated()
The new .bdrv_co_is_allocated() interface is useful because it can be
used when a VM is running, whereas .bdrv_is_allocated() is a synchronous
interface that does not cope with parallel requests.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for bdrv_commit() to use the BlockDriver
.bdrv_is_allocated() interface directly. Converting to the public
interface gives us the freedom to drop .bdrv_is_allocated() entirely in
favor of a new .bdrv_co_is_allocated() in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image files have two types of data: immutable data that describes things like
image size, backing files, etc. and mutable data that includes offset and
reference count tables.
Today, image formats aggressively cache mutable data to improve performance. In
some cases, this happens before a guest even starts. When dealing with live
migration, since a file is open on two machines, the caching of meta data can
lead to data corruption.
This patch addresses this by introducing a mechanism to invalidate any cached
mutable data a block driver may have which is then used by the live migration
code.
NB, this still requires coherent shared storage. Addressing migration without
coherent shared storage (i.e. NFS) requires additional work.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cache=unsafe completely ignored bdrv_flush, because flushing the host disk
costs a lot of performance. However, this means that qcow2 images (and
potentially any other format) can lose data even after the guest has issued a
flush if the qemu process crashes/is killed. In case of a host crash, data loss
is certainly expected with cache=unsafe, but if just the qemu process dies this
is a bit too unsafe.
Now that we have two separate flush functions, we can choose to flush
everythign to the OS, but don't enforce that it's physically written to the
disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses) even on
discs that aren't mounted. Add support for these events in the ATAPI
and SCSI cd drive device models.
To let management cope with the behavior of udev, an event should also
be added for "tray opened/closed". This way, after issuing an "eject"
command, management can poll until the guests actually reacts to the
command. They can then issue the "change" command after the tray has been
opened, or try with "eject -f" after a (configurable?) timeout. However,
with this patch and the corresponding support in the device models,
at least it is possible to do a manual two-step eject+change sequence.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several BlockDriverState fields are not being reinitialized across
bdrv_close()/bdrv_open(). Make sure they are reset to their default
values.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several block drivers set bs->read_only in .bdrv_open() but
block.c:bdrv_open_common() clobbers its value. Additionally, QED uses
bdrv_is_read_only() in .bdrv_open() to decide whether to perform
consistency checks.
The correct ordering is to initialize bs->read_only from the open flags
before calling .bdrv_open(). This way block drivers can override it if
necessary and can use bdrv_is_read_only() in .bdrv_open().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tmp_filename was used outside the block it was defined in, i.e. after it went
out of scope. Move its declaration to the top level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previous commits dropped most qobjects usage from qemu modules
(now they are a low level interface used by the QAPI). However,
some modules still include the qemu-objects.h header file.
This commit drops qemu-objects.h from some of those modules
and includes qjson.h instead, which is what they actually need.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The biggest change is to rename its prefix from BDRV_IOS to
BLOCK_DEVICE_IO_STATUS.
Next commit will convert the query-block command to the QAPI
and that's how the enumeration is going to be generated.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A future commit will convert bdrv_info() to the QAPI and it won't
provide IOS_INVAL.
Luckily all we have to do is to add a new 'iostatus_enabled'
member to BlockDriverState and use it instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add coroutine support for flush and apply the same emulation that
we already do for read/write. bdrv_aio_flush is simplified to always
go through a coroutine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit cd74d83345e0e3b708330ab8c4cd9111bb82cda6 ("block: switch
bdrv_read()/bdrv_write() to coroutines") removed the bdrv_has_async_rw()
callers. This patch removes bdrv_has_async_rw() since it is no longer
used.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to emulate .bdrv_read()/.bdrv_write() since these
interfaces are only called if aio and coroutine interfaces are not
present. All valid BlockDrivers must implement either sync, aio, or
coroutine interfaces.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers that implement coroutine functions used to get sync and
aio wrappers. This is no longer necessary since all request processing
now happens in a coroutine. If a block driver implements the coroutine
interface then none of the other interfaces will be invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More sync, aio, and coroutine unification. Make bdrv_aio_writev() go
through coroutine request processing.
Remove the dirty block callback mechanism which was needed only for aio
processing and can be done more naturally in coroutine context.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aio write operation marks blocks dirty when the write operation
completes. The coroutine write operation marks blocks dirty before
issuing the write operation.
It seems safest to mark the block dirty when the operation completes so
that anything tracking dirty blocks will not act before the change has
been made to the image file.
Make the coroutine write operation dirty blocks on write completion.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More sync, aio, and coroutine unification. Make bdrv_aio_readv() go
through coroutine request processing.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_read()/bdrv_write() functions call .bdrv_read()/.bdrv_write().
They should go through bdrv_co_do_readv() and bdrv_co_do_writev()
instead in order to unify request processing code across sync, aio, and
coroutine interfaces. This is also an important step towards removing
BlockDriverState .bdrv_read()/.bdrv_write() in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The public interface for I/O in coroutine context is bdrv_co_readv() and
bdrv_co_writev(). Split out the request processing code into
bdrv_co_do_readv() and bdrv_co_writev() so that it can be called
internally when we refactor all request processing to use coroutines.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The emulation functions which supply default BlockDriver .bdrv_*()
functions given another implemented .bdrv_*() function should not use
public bdrv_*() interfaces. This patch ensures they invoke .bdrv_*()
directly to avoid adding an extra layer of coroutine request processing
and possibly entering an infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will unify block layer request processing across sync, aio, and
coroutines and this means a .bdrv_co_*() emulation function should not
call back into the public interface. There's no need here, just call
.bdrv_aio_*() directly.
The gory details: bdrv_co_io_em() cannot call back into the public
bdrv_aio_*() interface since that will be handled using coroutines,
which causes us to call into bdrv_co_io_em() again in an infinite loop
:).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Contains the I/O status for the given device. The key is only present
if the device supports it and the VM is configured to stop on errors.
Please, check the documentation being added in this commit for more
information.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit adds support to the BlockDriverState type to keep track
of devices' I/O status.
There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC
(no space error) and BDRV_IOS_FAILED (any other error). The distinction
between no space and other errors is important because a management
application may want to watch for no space in order to extend the
space assigned to the VM and put it to run again.
Qemu devices supporting the I/O status feature have to enable it
explicitly by calling bdrv_iostatus_enable() _and_ have to be
configured to stop the VM on errors (ie. werror=stop|enospc or
rerror=stop).
In case of multiple errors being triggered in sequence only the first
one is stored. The I/O status is always reset to BDRV_IOS_OK when the
'cont' command is issued.
Next commits will add support to some devices and extend the
query-block/info block commands to return the I/O status information.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is useful to know the BlockDriverState as well as the
sector_num/nb_sectors of an emulated .bdrv_co_*() request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
bdrv_open_common() is a useful point to trace since it reveals the
filename and block driver for a given BlockDriverState.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To let device models distinguish between eject and load.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
