Commit Graph

500 Commits

Author SHA1 Message Date
Sergey Fedorov ac00c79ff6 target-arm: add AArch32 MIDR aliases in ARMv8
According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Sergey Fedorov 13b72b2b9a target-arm: Fix REVIDR reset value
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:08 +01:00
Sergey Fedorov 4e42a6ca37 target-arm: use extended address bits from supersection short descriptor
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:07 +01:00
Peter Maydell fc1891c74a target-arm: Handle "extended small page" descriptors correctly
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.

We were mishandling this in two ways:
 (1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
 (2) we were not correctly setting the page_size, which is 4K, not 1K

The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit
2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.

(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)

Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
2015-06-15 18:06:07 +01:00
Peter Maydell 4771cd01da target-arm: Remove v8_ prefix from names of non-v8-specific cpreg arrays
The ARMCPRegInfo arrays v8_el3_no_el2_cp_reginfo and v8_el2_cp_reginfo
are actually used on non-v8 CPUs as well. Remove the incorrect v8_
prefix from their names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1433182716-6400-1-git-send-email-peter.maydell@linaro.org
2015-06-02 15:32:43 +01:00
Markus Armbruster 57b6d95eb4 Revert "target-arm: Avoid g_hash_table_get_keys()"
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_hash_table_get_keys() anymore.

This reverts commit 82a3a11897.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1432749090-4698-1-git-send-email-armbru@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 8742d49d6f target-arm: Add TLBI_VAE2{IS}
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-11-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 51da90140b target-arm: Add TLBI_ALLE2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-10-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias bdb9e2d66a target-arm: Add TLBI_ALLE1{IS}
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias a57633c08f target-arm: Add TTBR0_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-8-git-send-email-edgar.iglesias@gmail.com
[PMM: Switch to preferred opc1/crm order for 64-bit AArch32 cpregs;
 drop unneeded use of vmsa_ttbr_writefn]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias ff05f37bab target-arm: Add TPIDR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-7-git-send-email-edgar.iglesias@gmail.com
[PMM: reordered fields into preferred opc0/opc1/crn/crm/opc2 order]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias b9cb5323bb target-arm: Add SCTLR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 06ec4c8c9f target-arm: Add TCR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias 95f949ac3d target-arm: Add MAIR_EL2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Edgar E. Iglesias a903c449b4 target-arm: Break down TLB_LOCKDOWN
Break down the overly broad wildcard definition of TLB_LOCKDOWN
down to v7 level.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Greg Bellows c6f191642a target-arm: Add AArch64 CPTR registers
Adds CPTR_EL2/3 system registers definitions and access function.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: merge CPTR_EL2 and HCPTR definitions into a single
 def using STATE_BOTH;
 don't use readfn/writefn to implement RAZ/WI registers;
 don't use accessfn for the no-EL2 CPTR_EL2;
 fix cpacr_access logic to catch EL2 accesses to CPACR being
 trapped to EL3;
 use new CP_ACCESS_TRAP_EL[23] rather than setting
 exception.target_el directly]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:52 +01:00
Greg Bellows 012a906b19 target-arm: Update interrupt handling to use target EL
Updated the interrupt handling to utilize and report through the target EL
exception field.  This includes consolidating and cleaning up code where
needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and
do_interrupt was updated to use the target_el exception field.  The
necessary code from arm_excp_target_el() was merged in where needed and the
function removed.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:51 +01:00
Peter Maydell 8c6084bf10 target-arm: Move setting of exception info into tlb_fill
Move the code which sets exception information out of
arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill
is the only caller which wants to raise_exception()
so it makes more sense for it to handle the whole of
the exception setup.

As part of this cleanup, move the user-mode-only
implementation function for the handle_mmu_fault CPU
method into cpu.c so we don't need to make it globally
visible, and rename the softmmu-only utility function
arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear
that it's not the same thing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:51 +01:00
Edgar E. Iglesias 18084b2f71 target-arm: Remove unneeded '+'
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1431499963-1019-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 20:04:19 +01:00
Edgar E. Iglesias b65c08ee1a target-arm: Correct accessfn for CNTV_TVAL_EL0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1431499963-1019-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 20:04:17 +01:00
Edgar E. Iglesias 12cde08aaf target-arm: Correct accessfn for CNTP_{CT}VAL_EL0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1431499963-1019-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 20:04:04 +01:00
Greg Bellows 88e8add8b6 target-arm: Add EL3 and EL2 TCR checking
Updated get_phys_addr_lpae to check the appropriate TTBCR/TCR depending on the
current EL. Support includes using the different TCR format as well as checks to
insure TTBR1 is not used when in EL2 or EL3.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 20:04:04 +01:00
Greg Bellows aef878be4e target-arm: Add TTBR regime function and use
Add a utility function for choosing the correct TTBR system register based on
the specified MMU index. Add use of function on physical address lookup.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-7-git-send-email-greg.bellows@linaro.org
[PMM: fixed regime_ttbr() return type to be uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 20:04:04 +01:00
Richard Henderson 3972ef6f83 tcg: Push merged memop+mmu_idx parameter to softmmu routines
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14 12:15:14 -07:00
Greg Bellows 4eb2764083 Allow ARMv8 SCR.SMD updates
Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1429888797-4378-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-26 16:49:26 +01:00
Sergey Fedorov 7ebd5f2e03 target-arm: rename c1_coproc to cpacr_el1
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-26 16:49:25 +01:00
Peter Maydell 0995bf8cd9 target-arm: Add user-mode transaction attribute
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 16:49:25 +01:00
Peter Maydell ebca90e4c3 target-arm: Use correct memory attributes for page table walks
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 16:49:25 +01:00
Peter Maydell 8bf5b6a9c1 target-arm: Honour NS bits in page tables
Honour the NS bit in ARM page tables:
 * when adding entries to the TLB, include the Secure/NonSecure
   transaction attribute
 * set the NS bit in the PAR when doing ATS operations

Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 16:49:25 +01:00
Peter Maydell 7847f9ea9f target-arm: Store SPSR_EL1 state in banked_spsr[1] (SPSR_svc)
The AArch64 SPSR_EL1 register is architecturally mandated to
be mapped to the AArch32 SPSR_svc register. This means its
state should live in QEMU's env->banked_spsr[1] field.
Correct the various places in the code that incorrectly
put it in banked_spsr[0].

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-01 17:57:29 +01:00
Peter Maydell fcf83ab103 target-arm: Ignore low bit of PC in M-profile exception return
For the ARM M-profile cores, exception return pops various registers
including the PC from the stack. The architecture defines that if the
lowest bit in the new PC value is set (ie the PC is not halfword
aligned) then behaviour is UNPREDICTABLE. In practice hardware
implementations seem to simply ignore the low bit, and some buggy
RTOSes incorrectly rely on this. QEMU's behaviour was architecturally
permitted, but bringing QEMU into line with the hardware behaviour
allows more guest code to run. We log the situation as a guest error.

This was reported as LP:1428657.

Reported-by: Anders Esbensen <anders@lyes.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16 12:30:47 +00:00
Andrew Jones d8e052b387 target-arm: get_phys_addr_lpae: more xn control
This patch makes the following changes to the determination of
whether an address is executable, when translating addresses
using LPAE.

1. No longer assumes that PL0 can't execute when it can't read.
   It can in AArch64, a difference from AArch32.
2. Use va_size == 64 to determine we're in AArch64, rather than
   arm_feature(env, ARM_FEATURE_V8), which is insufficient.
3. Add additional XN determinants
   - NS && is_secure && (SCR & SCR_SIF)
   - WXN && (prot & PAGE_WRITE)
   - AArch64: (prot_PL0 & PAGE_WRITE)
   - AArch32: UWXN && (prot_PL0 & PAGE_WRITE)
   - XN determination should also work in secure mode (untested)
   - XN may even work in EL2 (currently impossible to test)
4. Cleans up the bloated PAGE_EXEC condition - by removing it.

The helper get_S1prot is introduced. It may even work in EL2,
when support for that comes, but, as the function name implies,
it only works for stage 1 translations.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1426099139-14463-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16 12:30:46 +00:00
Andrew Jones d76951b65d target-arm: fix get_phys_addr_v6/SCTLR_AFE access check
Introduce simple_ap_to_rw_prot(), which has the same behavior as
ap_to_rw_prot(), but takes the 2-bit simple AP[2:1] instead of
the 3-bit AP[2:0]. Use this in get_phys_addr_v6 when SCTLR_AFE
is set, as that bit indicates we should be using the simple AP
format.

It's unlikely this path is getting used. I don't see CR_AFE
getting used by Linux, so possibly not. If it had been, then
the check would have been wrong for all but AP[2:1] = 0b11.
Anyway, this should fix it up, in case it ever does get used.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16 12:30:46 +00:00
Andrew Jones 0fbf523820 target-arm: convert check_ap to ap_to_rw_prot
Instead of mixing access permission checking with access permissions
to page protection flags translation, just do the translation, and
leave it to the caller to check the protection flags against the access
type. Also rename to ap_to_rw_prot to better describe the new behavior.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16 12:30:46 +00:00
Greg Bellows ce02049dbf target-arm: Add 32/64-bit register sync
Add AArch32 to AArch64 register sychronization functions.
Replace manual register synchronization with new functions in
aarch64_cpu_do_interrupt() and HELPER(exception_return)().

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1423736974-14254-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13 05:46:08 +00:00
Ildar Isaev fc1792e9aa target-arm: fix for exponent comparison in recpe_f64
f64 exponent in HELPER(recpe_f64) should be compared to 2045 rather than 1023
(FPRecipEstimate in ARMV8 spec). This fixes incorrect underflow handling when
flushing denormals to zero in the FRECPE instructions operating on 64-bit
values.

Signed-off-by: Ildar Isaev <ild@inbox.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:25 +00:00
Peter Maydell 87c3d48615 target-arm: Fix brace style in reindented code
This patch fixes the brace style in the code reindented in the
previous commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-02-05 13:37:24 +00:00
Peter Maydell 554b0b09ae target-arm: Reindent ancient page-table-walk code
A few of the oldest parts of the page-table-walk code have broken indent
(either hardcoded tabs or two-spaces). Reindent these sections.

For ease of review, this patch does not touch the brace style and
so is a whitespace-only change.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-02-05 13:37:24 +00:00
Peter Maydell 0480f69abf target-arm: Use mmu_idx in get_phys_addr()
Now we have the mmu_idx in get_phys_addr(), use it correctly to
determine the behaviour of virtual to physical address translations,
rather than using just an is_user flag and the current CPU state.

Some TODO comments have been added to indicate where changes will
need to be made to add EL2 and 64-bit EL3 support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
2015-02-05 13:37:24 +00:00
Peter Maydell d364970287 target-arm: Pass mmu_idx to get_phys_addr()
Make all the callers of get_phys_addr() pass it the correct
mmu_idx rather than just a simple "is_user" flag. This includes
properly decoding the AT/ATS system instructions; we include the
logic for handling all the opc1/opc2 cases because we'll need
them later for supporting EL2/EL3, even if we don't have the
regdef stanzas yet.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-02-05 13:37:24 +00:00
Peter Maydell 060e8a48cb target-arm: Split AArch64 cases out of ats_write()
Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-02-05 13:37:24 +00:00
Peter Maydell c1e3781090 target-arm: Define correct mmu_idx values and pass them in TB flags
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.

Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.

This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
---
This leaves some odd gaps in the TB flags usage. I will circle
back and clean this up later (including moving the other common
flags like the singlestep ones to the top of the flags word),
but I didn't want to bloat this patchseries further.
2015-02-05 13:37:23 +00:00
Peter Maydell 375421ccae target-arm: Add checks that cpreg raw accesses are handled
Add assertion checking when cpreg structures are registered that they
either forbid raw-access attempts or at least make an attempt at
handling them. Also add an assert in the raw-accessor-of-last-resort,
to avoid silently doing a read or write from offset zero, which is
actually AArch32 CPU register r0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422282372-13735-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
2015-02-05 13:37:22 +00:00
Peter Maydell 7a0e58fa64 target-arm: Split NO_MIGRATE into ALIAS and NO_RAW
We currently mark ARM coprocessor/system register definitions with
the flag ARM_CP_NO_MIGRATE for two different reasons:
1) register is an alias on to state that's also visible via
   some other register, and that other register is the one
   responsible for migrating the state
2) register is not actually state at all (for instance the TLB
   or cache maintenance operation "registers") and it makes no
   sense to attempt to migrate it or otherwise access the raw state

This works fine for identifying which registers should be ignored
when performing migration, but we also use the same functions for
synchronizing system register state between QEMU and the kernel
when using KVM. In this case we don't want to try to sync state
into registers in category 2, but we do want to sync into registers
in category 1, because the kernel might have picked a different
one of the aliases as its choice for which one to expose for
migration. (In particular, on 32 bit hosts the kernel will
expose the state in the AArch32 version of the register, but
TCG's convention is to mark the AArch64 version as the version
to migrate, even if the CPU being emulated happens to be 32 bit,
so almost all system registers will hit this issue now that we've
added AArch64 system emulation.)

Fix this by splitting the NO_MIGRATE flag in two (ALIAS and NO_RAW)
corresponding to the two different reasons we might not want to
migrate a register. When setting up the TCG list of registers to
migrate we honour both flags; when populating the list from KVM,
only ignore registers which are NO_RAW.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1422282372-13735-2-git-send-email-peter.maydell@linaro.org
[PMM: changed ARM_CP_NO_MIGRATE to ARM_CP_ALIAS on new SP_EL1 and
 SP_EL2 reginfo stanzas since there was a (semantic) merge conflict
 with the patchset that added those]
2015-02-05 13:37:22 +00:00
Greg Bellows 884b4deeeb target-arm: Add missing SP_ELx register definition
Added CP register definitions for SP_EL1 and SP_EL2.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:22 +00:00
Greg Bellows be8e812859 target-arm: Add extended RVBAR support
Added RVBAR_EL2 and RVBAR_EL3 CP register support.  All RVBAR_EL# registers
point to the same location and only the highest EL version exists at any one
time.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:22 +00:00
Greg Bellows 569b49f864 target-arm: Fix RVBAR_EL1 register encoding
Fix the RVBAR_EL1 CP register opc2 encoding from 2 to 1

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:21 +00:00
Stefan Weil 1281f8e308 target-arm: Fix typo in comment (seperately -> separately)
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-01-15 10:44:13 +03:00
Greg Bellows 60fb1a87b4 target-arm: Merge EL3 CP15 register lists
Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7.  However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset.  For this reason they must always exist.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418406450-14961-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:12:27 +00:00
Greg Bellows be693c87e4 target-arm: make MAIR0/1 banked
Added CP register info entries for the ARMv7 MAIR0/1 secure banks.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-26-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 12:07:52 +00:00