memtohex() adds an extra trailing NUL character.
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180408145933.1149-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not needed, kbd_put_qcode_console() will handle that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For both grapical and text consoles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180321135041.15768-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Install optional dependencies of QEMU to get better coverage.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1520942752-19449-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We don't source common.rc where prep_fail is defined, so spell out the
commands and do what was intended.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180326090350.30014-1-famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The apt-get commands we run through ssh expect certain features of the
tty, and refuses to work if /dev/null is used. It is ugly, but easy to
satisfy.
Actually, there is no reason to hide the output. It just makes things
harder to diagnose. We can always redirect in the Makefile, so don't do
it conditionally here.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180322034753.6301-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180315142713.30960-1-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
A mistake in the type passed to sizeof, that happens to work
when the out-of-line fallback itself is using host vectors,
but fails when using only the base types.
Tested-by: Emilio G. Cota <cota@braap.org>
Reported-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TLS test cert generation relies on a fixed set of algorithms that are
only usable under GNUTLS' default priority setting. When building QEMU
with a custom distro specific priority setting, this can cause the TLS
tests to fail. By forcing the tests to always use "NORMAL" priority we
can make them more robust.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was added in 13f1243, but is missing from qemu-options.hx
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current docs for TLS assume only VNC is using TLS. Some of the information
is also outdated (ie lacking subject alt name info for certs). Rewrite it to
more accurately reflect the current situation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
added an error message if a passed memory section address or size
is not aligned to the page size and thus cannot be DMA mapped.
This patch fixes the trace by printing the region name and the
memory region section offset within the address space (instead of
offset_within_region).
We also turn the error_report into a trace event. Indeed, In some
cases, the traces can be confusing to non expert end-users and
let think the use case does not work (whereas it works as before).
This is the case where a BAR is successively mapped at different
GPAs and its sections are not compatible with dma map. The listener
is called several times and traces are issued for each intermediate
mapping. The end-user cannot easily match those GPAs against the
final GPA output by lscpi. So let's keep those information to
informed users. In mid term, the plan is to advise the user about
BAR relocation relevance.
Fixes: 567b5b309a ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 4bfb274 added some QAPIfication of option parsing in
qemu_rbd_open(). We need to remove all the options we processed,
otherwise in bdrv_open_inherit() we will think the remaining options are
invalid.
(This needs to go in 2.12 to avoid a regression that prevents rbd
from being opened.)
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
configure tries to detect if the compiler
supports 16-byte vector operations.
As stated in the comment of the detection
program, there is a problem with the system
compiler on GCC on Centos 7.
This program doesn't actually detect the problem
with GCC on RHEL7 on PPC64LE (Red Hat 4.8.5-28).
This patch updates the test to look more like
it is in QEMU helpers, and now detects the problem.
The error reported is:
CC ppc64-softmmu/accel/tcg/tcg-runtime-gvec.o
..//accel/tcg/tcg-runtime-gvec.c: In function ‘helper_gvec_shl8i’:
../accel/tcg/tcg-runtime-gvec.c:558:26: internal compiler error: in emit_move_insn, at expr.c:3495
*(vec8 *)(d + i) = *(vec8 *)(a + i) << shift;
^
Fixes: db43267 "tcg: Add generic vector expanders"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20180328133152.24623-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaw6CJAAoJEPQH2wBh1c9AZvcIAL51TsxzLBfYbEr7t/OqaYcT
KptgkLn8UPUsVwEaZ1i9T+qpPqUhCgUeqBki4wTpGOfwmRO633L81lhlvLU1RD5f
a9qsIWtvG0eYw+BU4P+ojltufdeQRQMxuLVhoiq2ur9vC8zUy6tEnF+yqOdWHYsm
83Z2T/NFZ192zIwPD3Rq9/+ijllJOhODrHdAcnwBp0IuvlXi5FV7GjccB4scW/Ym
LwDe7cNWv0XlzRlosyhTRs0HiOm+XiLAj5t9dVKFiuZsUwGFEXx6GiRtUutDf1j8
5ham2wiYLsvxnSgRoUk486Txuj2ceNYDOvnllSv3uFh2kZyTaYewOL1acQFmtVw=
=5AX/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-04-03' into queue-block
A fix for preallocated truncation, a new iotest, and a fix to make the iotests work more comfortably on ppc64
# gpg: Signature made Tue Apr 3 17:40:57 2018 CEST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-04-03:
iotests: Test abnormally large size in compressed cluster descriptor
qemu-iotests: Use ppc64 qemu_arch on ppc64le host
iotests: Test preallocated truncate of 2G image
block/file-posix: Fix fully preallocated truncate
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L2 entries for compressed clusters have a field that indicates the
number of sectors used to store the data in the image.
That's however not the size of the compressed data itself, just the
number of sectors where that data is located. The actual data size is
usually not a multiple of the sector size, and therefore cannot be
represented with this field.
The way it works is that QEMU reads all the specified sectors and
starts decompressing the data until there's enough to recover the
original uncompressed cluster. If there are any bytes left that
haven't been decompressed they are simply ignored.
One consequence of this is that even if the size field is larger than
it needs to be QEMU can handle it just fine: it will read more data
from disk but it will ignore the extra bytes.
This test creates an image with two compressed clusters that use 5
sectors (2.5 KB) each, increases the size field to the maximum (8192
sectors, or 4 MB) and verifies that the data can be read without
problems.
This test is important because while the decompressed data takes
exactly one cluster, the maximum value allowed in the compressed size
field is twice the cluster size. So although QEMU won't produce images
with such large values we need to make sure that it can handle them.
Another effect of increasing the size field is that it can make
it include data from the following host cluster(s). In this case
'qemu-img check' will detect that the refcounts are not correct, and
we'll need to rebuild them.
Additionally, this patch also tests that decreasing the size corrupts
the image since the original data can no longer be recovered. In this
case QEMU returns an error when trying to read the compressed data,
but 'qemu-img check' doesn't see anything wrong if the refcounts are
consistent.
One possible task for the future is to make 'qemu-img check' verify
the sizes of the compressed clusters, by trying to decompress the data
and checking that the size stored in the L2 entry is correct.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180329120745.11154-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qemu target does not always correspond to the host machine type. For
example ppc64le machine target is ppc64. Let's introduce "qemu_arch"
variable to store the matching qemu architecture related to the current
architecture and use it when auto-detecting the default qemu binary.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Message-id: 20180329112053.5399-2-ldoktor@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-3-mreitz@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Storing the lseek() result in an int results in it overflowing when the
file is at least 2 GB big. Then, we have a 50 % chance of the result
being "negative" and thus thinking an error occurred when actually
everything went just fine.
So we should use the correct type for storing the result: off_t.
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1549231
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Support luks images creatins like in 205
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit ac64273c66 modified the output of iotest 186, changing
the QOM path of floppy drives from /machine/unattached/device[17] to
/machine/unattached/device[13].
Instead of updating the test output to reflect this change, this patch
adds a new filter that hides all QOM paths from the 'Attached to:'
line of the 'info block' command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI controllers are no longer created automatically for
-drive if=scsi, so this patch updates the tests that relied
on that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy command line interface gets the socket path from an option
called 'socket'. QAPI in contract uses SocketAddress, where the
corresponding option is called 'path'.
Fix the gluster block driver to accept both 'socket' and 'path', with
'path' being the preferred syntax.
https://bugzilla.redhat.com/show_bug.cgi?id=1545155
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180403110810.25624-1-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
QAPI generator provide #define helpers for looking up enum string.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180327153011.29569-1-marcandre.lureau@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This fixes leaks found by ASAN such as:
GTESTER tests/test-blockjob
=================================================================
==31442==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f88483cba38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f8845e1bd77 in g_malloc0 ../glib/gmem.c:129
#2 0x7f8845e1c04b in g_malloc0_n ../glib/gmem.c:360
#3 0x5584d2732498 in block_job_txn_new /home/elmarco/src/qemu/blockjob.c:172
#4 0x5584d2739b28 in block_job_create /home/elmarco/src/qemu/blockjob.c:973
#5 0x5584d270ae31 in mk_job /home/elmarco/src/qemu/tests/test-blockjob.c:34
#6 0x5584d270b1c1 in do_test_id /home/elmarco/src/qemu/tests/test-blockjob.c:57
#7 0x5584d270b65c in test_job_ids /home/elmarco/src/qemu/tests/test-blockjob.c:118
#8 0x7f8845e40b69 in test_case_run ../glib/gtestutils.c:2255
#9 0x7f8845e40f29 in g_test_run_suite_internal ../glib/gtestutils.c:2339
#10 0x7f8845e40fd2 in g_test_run_suite_internal ../glib/gtestutils.c:2351
#11 0x7f8845e411e9 in g_test_run_suite ../glib/gtestutils.c:2426
#12 0x7f8845e3fe72 in g_test_run ../glib/gtestutils.c:1692
#13 0x5584d270d6e2 in main /home/elmarco/src/qemu/tests/test-blockjob.c:377
#14 0x7f8843641f29 in __libc_start_main (/lib64/libc.so.6+0x20f29)
Add an assert to make sure that the job doesn't have associated txn before free().
[Jeff Cody: N.B., used updated patch provided by John Snow]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
In commit 223a23c198, we implemented a
workaround in the gluster driver to handle invalid values returned for
SEEK_DATA or SEEK_HOLE.
In some instances, these same invalid values can be seen in the posix
file handler as well - for example, it has been reported on FUSE gluster
mounts.
Calling assert() for these invalid values is overly harsh; we can safely
return -EIO and allow this case to be treated as a "learned nothing"
case (e.g., D4 / H4, as commented in the code).
This patch does the same thing that 223a23c198 did for gluster.c,
except in file-posix.c
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy command line interface gets the socket path from an option
called 'socket'. QAPI in contract uses SocketAddress, where the
corresponding option is called 'path'.
Fix the gluster block driver to accept both 'socket' and 'path', with
'path' being the preferred syntax.
https://bugzilla.redhat.com/show_bug.cgi?id=1545155
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Sparc as an extended sigaction structure containing
the field ka_restorer used in place of sa_restorer.
Define TARGET_ARCH_HAS_KA_RESTORER and use it
with sparc.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180402102453.9883-2-laurent@vivier.eu>
setup_frame() doesn't set correctly the address of the trampoline code.
The offset of retcode array must be added to the stack frame address.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180401204653.14211-1-laurent@vivier.eu>
Philippe Mathieu-Daudé
Peter Maydell
Gerd Hoffmann
Paolo Bonzini
Fam Zheng
Richard Henderson
Daniel P. Berrangé
Christophe Fergeau
Eric Auger
Jeff Cody
Laurent Vivier
Elie Tournier
Kevin Wolf
Alberto Garcia
Lukáš Doktor
Max Reitz
Vladimir Sementsov-Ogievskiy
Marc-André Lureau
Laurent Vivier