This will allow classes to specify a function to be called after all
instance_init functions were called.
This will be used by DeviceState to call qdev_prop_set_globals() at the
right moment.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.
Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJSCKrZAAoJECgfDbjSjVRpzWsH/2vJswTENyE1ws/fgs3QIxM/
YNGpOkxXGtfLB8EgkSchdEFytFidDE7VJZA/maRS3jY1/vZbd54qjlfBSaoWa27l
eaLMqjr5vdFQXJMn4WS1Fhv2HEiTRame8RxvCkLvv3SU87QzDxbwdvgTNUsDSREJ
OUBZLqEpyK5mf7e/qdFxxFUWuOGAfbQhMw3A8jYYxNbmczbSvawA/qthTgsXiyW4
t5Kak2GzQ5W5yLhhe3PhdoD/9XnG0qFKP2ZGha/PcrQjAi+7oCZl2qJ55V5MTHl8
mh8Q1Qpp/5SDeo6kKNVBQ5ysF9iUbrPxog44LnkVgX4F8/282/birt6VfeyKZbg=
=U+hn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio fixes for 1.6
This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 12 Aug 2013 04:28:57 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vhost: clear signalled_used_valid on vhost stop
virtio: clear signalled_used_valid when switching from dataplane
i82801b11: Fix i82801b11 PCI host bridge config space
pc: disable pci-info for 1.6
Message-id: 1376308831-19978-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the dataplane thread stops, its vring.c implementation synchronizes
vring state back to virtio.c so we can continue emulating the virtio
device.
This patch ensures that virtio.c's signalled_used_valid flag is reset so
that we do not suppress guest notifications due to stale signalled_used
values.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While the machine is paused, in guest_phys_blocks_append() we register a
one-shot MemoryListener, solely for the initial collection of the valid
guest-physical memory ranges that happens at listener registration time.
For each range that is reported to guest_phys_blocks_region_add(), we
attempt to merge the range with the preceding one.
Ranges can only be joined if they are contiguous in both guest-physical
address space, and contiguous in host virtual address space.
The "maximal" ranges that remain in the end constitute the guest-physical
memory map that the dump will be based on.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vmcore must use physical addresses that are visible to the guest, not
addresses that point into linear RAMBlocks. As first step, introduce the
list type into which we'll collect the physical mappings in effect at the
time of the dump.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As of bd5c51ee6c, chardevs no longer use
bottom-halves to issue CHR_EVENT_OPENED events. To maintain past
semantics, we instead defer the CHR_EVENT_OPENED events toward the end
of chardev initialization.
For muxes, this isn't good enough, since a range of FEs must be able
to attach to the mux prior to any CHR_EVENT_OPENED being issued, else
each FE will immediately print it's initial output (prompts, banners,
etc.) just prior to us switching to the next FE as part of
initialization.
The is new and confusing behavior for users, as they'll see output for
things like the HMP monitor, even though their the current mux focus
may be a guest serial port with potentially no output.
We fix this by further deferring CHR_EVENT_OPENED events for FEs
associated with muxes until after machine init by flagging mux chardevs
with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED
events until we explicitly set the mux as opened later.
Currently, we must defer till after machine init since we potentially
associate FEs with muxes as part of realize (for instance,
serial_isa_realizefn).
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this patch dump-guest-memory on s390 produces an ELF formatted,
crash-readable dump.
In order to implement this, the arch-specific part of dump-guest-memory
was added:
target-s390x/arch_dump.c contains the whole set of function for writing
Elf note sections of all types for s390x.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[fixed indentation, use CamelCase, rename note_t to Note, use S390CPU]
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.
Examples:
-global i440FX-pcihost.pci-hole64-size=4G
-global q35-pcihost.pci-hole64-size=4G
Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move PCIEPort's "port" property to the new type, same for "aer_log_max".
Move PCIESlot's "chassis" and "slot" properties to the new type.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE]
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: refuse to start if device is already in use
dataplane: enable virtio-blk x-data-plane=on live migration
migration: fix spice migration
migration: notify migration state before starting thread
block: Repair the throttling code.
gluster: Add image resize support
Message-id: 1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Categorize devices that appear as output to "-device ?" command
by logical functionality. Sort the devices by logical categories
before showing them to user.
The sort is done by functionality rather than alphabetical.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-3-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Made small tweaks in code to prevent compilation issues
when importing qemu/bitmap.h in qdev-core
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling code was segfaulting since commit
02ffb50448 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).
Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.
For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* 'trivial-patches' of git://git.corpit.ru/qemu:
target-mips: Remove assignment to a variable which is never used
misc: Use g_assert_not_reached for code which is expected to be unreachable
qemu-options: mention C-a h in the -nographic doc
misc: Fix new typos in comments and strings
linux-user: correct argument number for sys_mremap and sys_splice
PPC: dbdma: macio: Fix format specifiers (build regression)
watchdog: Remove break after exit
exec: Remove env from list of poisoned names
hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
timer: make timers_state static
aes: Remove unused code (NDEBUG, u16)
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The global variable env was removed some time ago, so this name may be
used without any restriction now.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Kevin Wolf (16) and Ian Main (2)
# Via Kevin Wolf
* kwolf/for-anthony:
Add tests for sync modes 'TOP' and 'NONE'
Implement sync modes for drive-backup.
Implement qdict_flatten()
blockdev: Split up 'cache' option
blockdev: Rename 'readonly' option to 'read-only'
qcow2: Use dashes instead of underscores in options
blockdev: Rename I/O throttling options for QMP
QemuOpts: Add qemu_opt_unset()
block: Allow "driver" option on the top level
qapi: Anonymous unions
qapi.py: Maintain a list of union types
qapi: Add consume argument to qmp_input_get_object()
qapi: Flat unions with arbitrary discriminator
qapi: Add visitor for implicit structs
docs: Document QAPI union types
qapi-visit.py: Implement 'base' for unions
qapi-visit.py: Split off generate_visit_struct_fields()
qapi-types.py: Implement 'base' for unions
Message-id: 1374870032-31672-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
