Commit Graph

106 Commits

Author SHA1 Message Date
Richard Henderson a46c1244a0 tcg: Remove support for ia64 as host
We threatened to remove ia64 as host in v2.9.0.  Its time has now come.

There are still some usages of defined(__ia64__) throughout the source
code that would be triggered if one were to enable TCI on an ia64 host.
Leave those alone for now.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-05 12:39:25 -07:00
Julian Brown f7478a92dd Fix Thumb-1 BE32 execution and disassembly.
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.

This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Richard Henderson 429b31a205 Revert "Remove remainders of HPPA backend"
This reverts commit d41f3c3cc7.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:13:56 -08:00
Thomas Huth d41f3c3cc7 Remove remainders of HPPA backend
The HPPA backend has been removed by the following commit:

    802b508123
    tcg-hppa: Remove tcg backend

But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-15 15:32:22 +03:00
Peter Maydell d38ea87ac5 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Crosthwaite 0960be7cff disas: QOMify alpha specific disas setup
Move the target_disas() alpha specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

This also makes monitor_disas() consistent with target_disas(), as
monitor_disas() was missing a set of the BFD (This was an omission from
commit b9bec751c8).

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite 63a946c7e3 disas: QOMify mips specific disas setup
Move the target_disas() mips specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite d49dd523e4 disas: QOMify sh4 specific disas setup
Move the target_disas() sh4 specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite 20984673e6 disas: QOMify lm32 specific disas setup
Move the target_disas() lm32 specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite df0900eb89 disas: QOMify sparc specific disas setup
Move the target_disas() sparc specifics to the QOM disas_set_info hook
and delete the #ifdef specific code in disas.c.

Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite 4f669905d9 disas: QOMify m68k specific disas setup
Move the target_disas() m68k specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite 9f87a4cacd disas: QOMify moxie specific disas setup
Move the target_disas() moxie specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Cc: Anthony Green <green@moxielogic.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Peter Crosthwaite dbad6b74b3 disas: QOMify s390x specific disas setup
Move the target_disas() s390 specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-22 15:49:40 +02:00
Pavel Butsykin caf15319e8 monitor: make monitor_fprintf and mon_get_cpu externally visible
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:42 +02:00
Peter Crosthwaite 9504c5445c disas: Defeature print_target_address
It does not work in multi-arch as it requires the CPU specific
TARGET_VIRT_ADDR_SPACE_BITS global define. Just use the generic
version that does no masking. Targets should be responsible for
passing in a sane virtual address.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1436129432-16617-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Peter Crosthwaite 6b625fde5e disas: cris: QOMify target specific disas setup
Move the target_disas() cris specifics to the QOM disas_set_info() hook
and delete the cris specific code in disas.c.

This also now adds support for monitor_disas() to cris.

E.g.
(qemu) xp 0x40004000
0000000040004000: 0x1e6f25f0

And before this patch:
(qemu) xp/i 0x40004000
0x40004000: Asm output not supported on this arch

After:
(qemu) xp/i 0x40004000
0x40004000:  di
(qemu) xp/i 0x40004002
0x40004002:  move.d 0xb003c004,$r1

Note: second example is 6-byte misaligned instruction!

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite efc6674be8 disas: microblaze: QOMify target specific disas setup
Move the target_disas() MB specifics to the QOM disas_set_info hook
and delete the MB specific code in disas.c.

This also now adds support for monitor_disas() to Microblaze.

E.g.
(qemu) xp 0x90000000
0000000090000000: 0x94208001

And before this patch:
(qemu) xp/i 0x90000000
0x90000000: Asm output not supported on this arch

After:
(qemu) xp/i 0x90000000
0x90000000:  mfs    r1, rmsr

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite 484406200e disas: arm: QOMify target specific disas setup
Move the target_disas() ARM specifics to the QOM disas_set_info hook
and delete the ARM specific code in disas.c.

This has the extra advantage of the more fully featured target_disas()
implementation now applying to monitor_disas().

Currently, target_disas() has multi-endian, thumb and AArch64
support whereas the existing monitor_disas() support only has vanilla
AA32 support.

E.G. Running an AA64 linux kernel the following -d in_asm disas happens
(taget_disas()):

IN:
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004:  aa1f03e1      mov x1, xzr

However before this patch, disasing the same from the monitor:

(qemu) xp/i 0x40000000
0x0000000040000000:  580000c0      stmdapl  r0, {r6, r7}

After this patch:
(qemu) xp/i 0x40000000
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite 37b9de463b disas: QOMify target specific setup
Add a QOM function hook for target-specific disassembly setup. This
allows removal of the #ifdeffery currently implementing target specific
disas setup from disas.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:41 +02:00
Peter Crosthwaite 2de295c544 disas: Add print_insn to disassemble info
Add the print_insn pointer to the disassemble info structure. This is
to prepare for QOMification support, where a QOM CPU hook function will
be responsible for setting the print_insn() function. Add this function
to the existing struct to consolidate such that only the one struct
needs to be passed to the new QOM API.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Peter Crosthwaite d49190c420 disas: Remove uses of CPU env
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22 17:40:01 +02:00
Tom Musta 1c38f84373 monitor: QEMU Monitor Instruction Disassembly Incorrect for PowerPC LE Mode
The monitor support for disassembling instructions does not honor the MSR[LE]
bit for PowerPC processors.

This change enhances the monitor_disas() routine by supporting a flag bit
for Little Endian mode.  Bit 16 is used since that bit was used in the
analagous guest disassembly routine target_disas().

Also, to be consistent with target_disas(), the disassembler bfd_mach field
can be passed in the flags argument.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:26 +02:00
Tom Musta e13951f896 target-ppc: Fix target_disas
Inspect only bit 16 for the Little Endian test.  Correct comment preceding
the target_disas() function.  Correct grammar in comment for flags processing.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:26 +02:00
Claudio Fontana 999b53ec87 disas: Implement disassembly output for A64
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.

Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
 * added support for target disassembly
 * switched to custom QEMUDisassembler so the output format
   matches what QEMU expects
 * make sure we correctly fall back to "just print hex"
   if we didn't build the AArch64 disassembler because of
   lack of a C++ compiler
 * rename from 'aarch64' to 'arm-a64' because this is a
   disassembler for the A64 instruction set
 * merge aarch64.c and aarch64-cxx.cc into one C++ file
 * simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00
Richard Henderson c46ffd57a3 disas: Implement fallback to dump object code as hex
The OBJD-[HT] tags will be used by a script to run the hex blob
through objdump --disassemble.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-08-24 07:26:45 +02:00
Andreas Färber f17ec444c3 exec: Change cpu_memory_rw_debug() argument to CPUState
Propagate X86CPU in kvmvapic for simplicity.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 02:41:33 +02:00
Aurelien Jarno 88770fec6c disas: Disassemble all ppc insns for the guest
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 23:02:42 +02:00
Richard Henderson 66d4f6a32b disas: Disassemble all ppc insns for the host
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-15 19:44:35 +02:00
Anthony Green bd86a88eed Add moxie disassembler
Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-23 14:25:41 +00:00
Paolo Bonzini 83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 76cad71136 build: kill libdis, move disassemblers to disas/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:06 +01:00
Blue Swirl f4359b9ffe disas: avoid using cpu_single_env
Pass around CPUArchState instead of using global cpu_single_env.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-11-10 13:49:20 +00:00
Richard Henderson 9b9c37c364 tcg-sparc: Assume v9 cpu always, i.e. force v8plus in 32-bit mode.
Current code doesn't actually work in 32-bit mode at all.  Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:16 +02:00
Peter Maydell 636bd28939 disas: Fix printing of addresses in disassembly
In our disassembly code, the bfd_vma type is always 64 bits,
even if the target's virtual address width is only 32 bits. This
means that when we print out addresses we need to truncate them
to 32 bits, to avoid odd output which has incorrectly sign-extended
a value to 64 bits, for instance this ARM example:
    0x80479a60:  e59f4088     ldr  r4, [pc, #136]  ; 0xffffffff80479a4f

(It would also be possible to truncate before passing the address
to info->print_address_func(), but truncating in the final print
function is the same approach that binutils takes to this problem.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:32:34 +00:00
Jim Meyering a31f053129 fix some common typos
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:

git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'

Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:

  sed -i '450s!thru!through!' Changelog
  sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
  sed -i '54s!miniscule!minuscule!' disas.c
  sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
  sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
  sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
  sed -i '307s!explictly!explicitly!' qemu-ga.c
  sed -i '490s!preceeding!preceding!' qga/commands-posix.c
  sed -i '792s!addres!address!' qga/commands-posix.c
  sed -i '6s!beeing!being!' tests/tcg/test-mmap.c

Also, manually fix "arithmentic", spotted by Peter Maydell:

  sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c

Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-05-14 07:27:24 +02:00
Stefan Weil b0b0f1c964 disas: Replace 'unsigned long' by 'uintptr_t'
This is needed for w64. It changes nothing for other hosts.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-15 21:25:18 +02:00
Paul Brook d8fd295499 Userspace ARM BE8 support
Add support for ARM BE8 userspace binaries.
i.e. big-endian data and little-endian code.
In principle LE8 mode is also possible, but AFAIK has never actually
been implemented/used.

System emulation doesn't have any useable big-endian board models,
but should in principle work once you fix that.
Dynamic endianness switching requires messing with data accesses,
preferably with TCG cooperation, and is orthogonal to BE8 support.

Signed-off-by: Paul Brook <paul@codesourcery.com>
[PMM: various changes, mostly as per my suggestions in code review:
 * rebase
 * use EF_ defines rather than hardcoded constants
 * make bswap_code a bool for future VMSTATE macro compatibility
 * update comment in cpu.h about TB flags bit field usage
 * factor out load-code-and-swap into arm_ld*_code functions and
   get_user_code* macros
 * fix stray trailing space at end of line
 * added braces in disas.c to satisfy checkpatch
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-04-06 19:25:57 +03:00
Michael Walle 79368f4984 target-lm32: add simple disassembler
Because binutils disassembler is based on libopcode, this is a rewrite from
scratch.

Signed-off-by: Michael Walle <michael@walle.cc>
2012-04-01 20:30:23 +02:00
Andreas Färber 9349b4f9fd Rename CPUState -> CPUArchState
Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:27 +01:00
Stefan Weil 5826e51917 tcg: Add tci disassembler
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2011-10-31 21:52:17 +01:00
Frediano Ziglio e99722f66a disasm: update comment
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-25 09:21:48 +01:00
Blue Swirl 2b41f10e18 Remove exec-all.h include directives
Most exec-all.h include directives are now useless, remove them.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:35 +00:00
Richard Henderson b9bec751c8 target-alpha: Disassemble EV6 PALcode instructions.
The QEMU emulation PALcode will use EV6 PALcode insns regardless
of the "real" cpu instruction set being emulated.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:04 -07:00
Stefan Weil 54f7b4a396 Replace cpu_physical_memory_rw were possible
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.

lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12 21:51:50 +02:00
Ulrich Hecht db50060984 s390x: Enable disassembler for s390x
This patch enables the instruction disassembler when using an
S390x target.

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04 00:34:11 +02:00
Aurelien Jarno 0f136d9e06 disas: remove opcode printing on ARM hosts
Following commit 5d48e9174e, it's possible
to remove the hack that used to display the opcodes on ARM hosts only.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-12 15:12:58 +01:00
Edgar E. Iglesias b09cd072df cris: Support disassembly of crisv10
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2011-01-10 22:31:09 +01:00
Stefan Weil 8b7968f7c4 Use GCC_FMT_ATTR (format checking)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03 06:34:51 +00:00
Aurelien Jarno 903ec55cc0 ia64 disas support
Taken from binutils SVN, using last GPLv2 version.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01 21:51:59 +02:00
Magnus Damm b4e1f07747 sh4 disasm fixes
Add the sh4 target to the monitor disassembly function,
and remove a duplicate "0x" printout from the sh4 dis-
assembly code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14 01:19:12 +01:00