Commit Graph

377 Commits

Author SHA1 Message Date
Michael Clark 25fa194b7b
RISC-V Build Infrastructure
This adds RISC-V into the build system enabling the following targets:

- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user

This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.

Expected checkpatch errors for consistency reasons:

ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07 08:30:28 +13:00
David Hildenbrand 5a9c973b6c cpus: CPU threads are always created initially for one CPU only
It can never happen for single-threaded TCG that we have more than one
CPU in the list, while the first one has not been marked as "created".

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180209195239.16048-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:00:59 +01:00
David Hildenbrand 81e9631168 cpus: wait for CPU creation at central place
We can now also wait for the CPU creation for single-threaded TCG, so we
can move the waiting bits further out.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180209195239.16048-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:00:59 +01:00
David Hildenbrand a342173ab7 cpus: properly inititalize CPU > 1 under single-threaded TCG
All but the first CPU are currently not fully inititalized (e.g.
cpu->created is never set).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180209195239.16048-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:00:59 +01:00
Markus Armbruster 112ed241f5 qapi: Empty out qapi-schema.json
The previous commit improved compile time by including less of the
generated QAPI headers.  This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.

Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.

It's possible everywhere, except:

* monitor.c needs qmp-command.h to get qmp_init_marshal()

* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
  qapi-event.h to get enum QAPIEvent

Perhaps we'll get rid of those some other day.

Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Viktor Mihajlovski ca230ff33f qmp: add architecture specific cpu data for query-cpus-fast
The s390 CPU state can be retrieved without interrupting the
VM execution. Extendend the CpuInfoFast union with architecture
specific data and an implementation for s390.

Return data looks like this:
 [
   {"thread-id":64301,"props":{"core-id":0},
    "arch":"s390","cpu-state":"operating",
    "qom-path":"/machine/unattached/device[0]","cpu-index":0},
   {"thread-id":64302,"props":{"core-id":1},
    "arch":"s390","cpu-state":"operating",
    "qom-path":"/machine/unattached/device[1]","cpu-index":1}
]

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-4-git-send-email-mihajlov@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
Luiz Capitulino ce74ee3dea qmp: add query-cpus-fast
The query-cpus command has an extremely serious side effect:
it always interrupts all running vCPUs so that they can run
ioctl calls. This can cause a huge performance degradation for
some workloads. And most of the information retrieved by the
ioctl calls are not even used by query-cpus.

This commit introduces a replacement for query-cpus called
query-cpus-fast, which has the following features:

 o Never interrupt vCPUs threads. query-cpus-fast only returns
   vCPU information maintained by QEMU itself, which should be
   sufficient for most management software needs

 o Drop "halted" field as it can not be retrieved in a fast
   way on most architectures

 o Drop irrelevant fields such as "current", "pc" and "arch"

 o Rename some fields for better clarification & proper naming
   standard

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1518797321-28356-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
Viktor Mihajlovski 9d0306dfdf qmp: expose s390-specific CPU info
Presently s390x is the only architecture not exposing specific
CPU information via QMP query-cpus. Upstream discussion has shown
that it could make sense to report the architecture specific CPU
state, e.g. to detect that a CPU has been stopped.

With this change the output of query-cpus will look like this on
s390:

   [
     {"arch": "s390", "current": true,
      "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
      "qom_path": "/machine/unattached/device[0]",
      "halted": false, "thread_id": 63115},
     {"arch": "s390", "current": false,
      "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
      "qom_path": "/machine/unattached/device[1]",
      "halted": true, "thread_id": 63116}
   ]

This change doesn't add the s390-specific data to HMP 'info cpus'.
A follow-on patch will remove all architecture specific information
from there.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
Markus Armbruster 922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Peter Maydell 7b213bb475 * socket option parsing fix (Daniel)
* SCSI fixes (Fam)
 * Readline double-free fix (Greg)
 * More HVF attribution fixes (Izik)
 * WHPX (Windows Hypervisor Platform Extensions) support (Justin)
 * POLLHUP handler (Klim)
 * ivshmem fixes (Ladi)
 * memfd memory backend (Marc-André)
 * improved error message (Marcelo)
 * Memory fixes (Peter Xu, Zhecheng)
 * Remove obsolete code and comments (Peter M.)
 * qdev API improvements (Philippe)
 * Add CONFIG_I2C switch (Thomas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJaexoYAAoJEL/70l94x66DVL0IAJC//aZCwwgyN9CRNDcOo10/
 UPtzprfezERkur77r1KvEYVNIfslRF6iTBou2+suOWkzoNL2LJ0XZ+wi+2u2sFIF
 ikvbQVk4dOWqJJQj7e1cmv5A2EZy2dcxjAoD1IG6CRy76+HzYqwjHVw+HkYY5CUS
 qwnUWjQddP6WtH9MsUHpX7p7atWo7T1tzkx4v8H+CIHBO3uUJQSZLkGYflvcstpj
 Fo04bZzSkDj2rnlqqBo/6UgJQXD8++Rs64vmiX2xwcK47TWO31Vbuwu+r8V9osWm
 LHFmRpL8ZkZfL0yqf0bpjmd688dirjVpHIJ5KE043Lo6AdI+K5xBfoBjXxtPiKE=
 =o90D
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* socket option parsing fix (Daniel)
* SCSI fixes (Fam)
* Readline double-free fix (Greg)
* More HVF attribution fixes (Izik)
* WHPX (Windows Hypervisor Platform Extensions) support (Justin)
* POLLHUP handler (Klim)
* ivshmem fixes (Ladi)
* memfd memory backend (Marc-André)
* improved error message (Marcelo)
* Memory fixes (Peter Xu, Zhecheng)
* Remove obsolete code and comments (Peter M.)
* qdev API improvements (Philippe)
* Add CONFIG_I2C switch (Thomas)

# gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
  Add the WHPX acceleration enlightenments
  Introduce the WHPX impl
  Add the WHPX vcpu API
  Add the Windows Hypervisor Platform accelerator.
  tests/test-filter-redirector: move close()
  tests: use memfd in vhost-user-test
  vhost-user-test: make read-guest-mem setup its own qemu
  tests: keep compiling failing vhost-user tests
  Add memfd based hostmem
  memfd: add hugetlbsize argument
  memfd: add hugetlb support
  memfd: add error argument, instead of perror()
  cpus: join thread when removing a vCPU
  cpus: hvf: unregister thread with RCU
  cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug
  cpus: dummy: unregister thread with RCU, exit loop on unplug
  cpus: kvm: unregister thread with RCU
  cpus: hax: register/unregister thread with RCU, exit loop on unplug
  ivshmem: Disable irqfd on device reset
  ivshmem: Improve MSI irqfd error handling
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	cpus.c
2018-02-07 20:40:36 +00:00
Justin Terry (VM) 19306806ae Add the WHPX acceleration enlightenments
Implements the WHPX accelerator cpu enlightenments to actually use the whpx-all
accelerator on Windows platforms.

Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-5-git-send-email-juterry@microsoft.com>
[Register/unregister VCPU thread with RCU. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:26 +01:00
Paolo Bonzini dbadee4ff4 cpus: join thread when removing a vCPU
If no one joins the thread, its associated memory is leaked.

Reported-by: CheneyLin <linzc@zju.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Paolo Bonzini 8178e6376f cpus: hvf: unregister thread with RCU
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Paolo Bonzini 9b0605f983 cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug
Keep running until cpu_can_run(cpu) becomes false, for consistency
with other acceslerators.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Paolo Bonzini d2831ab065 cpus: dummy: unregister thread with RCU, exit loop on unplug
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Paolo Bonzini 57615ed56c cpus: kvm: unregister thread with RCU
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Paolo Bonzini 9857c2d2f7 cpus: hax: register/unregister thread with RCU, exit loop on unplug
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07 14:09:25 +01:00
Alistair Francis 493d89bf74 tcg: Replace fprintf(stderr, "*\n" with error_report()
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.

find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Weil <sw@weilnetz.de>

Conversions that aren't followed by exit() dropped, because they might
be inappropriate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-14-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-02-06 18:29:46 +01:00
Paolo Bonzini db08b687cd cpus: unify qemu_*_wait_io_event
Except for round-robin TCG, every other accelerator is using more or
less the same code around qemu_wait_io_event_common.  The exception
is HAX, which also has to eat the dummy APC that is queued by
qemu_cpu_kick_thread.

We can add the SleepEx call to qemu_wait_io_event under "if
(!tcg_enabled())", since that is the condition that is used in
qemu_cpu_kick_thread, and unify the function for KVM, HAX, HVF and
multi-threaded TCG.  Single-threaded TCG code can also be simplified
since it is only used in the round-robin, sleep-if-all-CPUs-idle case.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16 14:54:51 +01:00
Pavel Dovgalyuk b39e3f34c9 icount: fixed saving/restoring of icount warp timers
This patch adds saving and restoring of the icount warp
timers in the vmstate.
It is needed because there timers affect the virtual clock value.
Therefore determinism of the execution in icount record/replay mode
depends on determinism of the timers.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-01-16 14:54:51 +01:00
Sergio Andres Gomez Del Real c97d6d2cdf i386: hvf: add code base from Google's QEMU repository
This file begins tracking the files that will be the code base for HVF
support in QEMU. This code base is part of Google's QEMU version of
their Android emulator, and can be found at
https://android.googlesource.com/platform/external/qemu/+/emu-master-dev

This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted
Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is
appropriately licensed under GPL v2-or-later, except for the code inside
x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel),
is licensed GPL v2-only.

This code base already implements a very great deal of functionality,
although Google's version removed from Vertuu's the support for APIC
page and hyperv-related stuff. According to the Android Emulator Release
Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now
enabled by default on macOS for 32-bit x86 images to improve performance
and macOS compatibility", although we better use with caution for, as the
same Revision warns us, "If you experience issues with it specifically,
please file a bug report...". The code hasn't seen much update in the
last 5 months, so I think that we can further develop the code with
occasional visiting Google's repository to see if there has been any
update.

On top of Google's code, the following changes were made:

- add code to the configure script to support the --enable-hvf argument.
If the OS is Darwin, it checks for presence of HVF in the system. The
patch also adds strings related to HVF in the file qemu-options.hx.
QEMU will only support the modern syntax style '-M accel=hvf' no enable
hvf; the legacy '-enable-hvf' will not be supported.

- fix styling issues

- add glue code to cpus.c

- move HVFX86EmulatorState field to CPUX86State, changing the
the emulation functions to have a parameter with signature 'CPUX86State *'
instead of 'CPUState *' so we don't have to get the 'env'.

Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com>
Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-22 15:01:20 +01:00
Peter Xu 80ceb07a83 cpu: refactor cpu_address_space_init()
Normally we create an address space for that CPU and pass that address
space into the function.  Let's just do it inside to unify address space
creations.  It'll simplify my next patch to rename those address spaces.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171123092333.16085-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:30:31 +01:00
David Hildenbrand ebd05fea9b cpus: make pause_all_cpus() play with SMP on single threaded TCG
pause_all_cpus() is sometimes called from a VCPU thread (e.g. s390x
during special reset). It cannot deal with multiple VCPUs per Thread
(single threaded TCG) yet.

Booting an s390x guest with -smp 2 and single threaded TCG from disk
currently fails. The DIAG 308 will issue a pause_all_cpus() and wait
forever for the CPUs to actually stop. But it is waiting for itself.

So let's stop all VCPUs belonging to the current thread. Factor out
stopping of a VCPU.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171129191215.11323-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21 09:22:44 +01:00
Emilio G. Cota 3468b59e18 tcg: enable multiple TCG contexts in softmmu
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.

In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.

Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.

TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.

Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.

Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:

Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
        have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
        use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
         use_vis3_instructions

Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Emilio G. Cota e8feb96fcc tcg: introduce regions to split code_gen_buffer
This is groundwork for supporting multiple TCG contexts.

The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.

What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).

We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.

The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).

* -smp 1, 1 region (entire buffer):
    qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
    qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
    qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
    qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
    qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
    qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
    qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
    qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367

That is, 8 flushes.

* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:

    qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
    qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
    qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
    qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
    qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
    qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
    qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
    qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368

Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.

* -smp 8, static partitioning of 8 regions (10 MB per region):
    qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
    qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
    qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
    qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
    qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
    qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
    qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
    qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
    qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
    qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
    qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
    qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
    qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
    qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
    qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
    qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
    qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
    qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
    qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
    qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364

That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
Alexey Kardashevskiy b516572f31 memory: Get rid of address_space_init_shareable
Since FlatViews are shared now and ASes not, this gets rid of
address_space_init_shareable().

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-17-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22 01:06:51 +02:00
Alistair Francis 3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Felipe Franciosi 90bb0c0421 cpus: reset throttle_thread_scheduled after sleep
Currently, the throttle_thread_scheduled flag is reset back to 0 before
sleeping (as part of the throttling logic). Given that throttle_timer
(well, any timer) may tick with a slight delay, it so happens that under
heavy throttling (ie. close or on CPU_THROTTLE_PCT_MAX) the tick may
schedule a further cpu_throttle_thread() work item after the flag reset,
but before the previous sleep completed. This results on the vCPU thread
sleeping continuously for potentially several seconds in a row.

The chances of that happening can be drastically minimised by resetting
the flag after the sleep.

Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Malcolm Crossley <malcolm@nutanix.com>
Message-Id: <1495229390-18909-1-git-send-email-felipe@nutanix.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 18:22:03 +02:00
David Gibson 75e972dab5 migration: Mark CPU states dirty before incoming migration/loadvm
As a rule, CPU internal state should never be updated when
!cpu->kvm_vcpu_dirty (or the HAX equivalent).  If that is done, then
subsequent calls to cpu_synchronize_state() - usually safe and idempotent -
will clobber state.

However, we routinely do this during a loadvm or incoming migration.
Usually this is called shortly after a reset, which will clear all the cpu
dirty flags with cpu_synchronize_all_post_reset().  Nothing is expected
to set the dirty flags again before the cpu state is loaded from the
incoming stream.

This means that it isn't safe to call cpu_synchronize_state() from a
post_load handler, which is non-obvious and potentially inconvenient.

We could cpu_synchronize_all_state() before the loadvm, but that would be
overkill since a) we expect the state to already be synchronized from the
reset and b) we expect to completely rewrite the state with a call to
cpu_synchronize_all_post_init() at the end of qemu_loadvm_state().

To clear this up, this patch introduces cpu_synchronize_pre_loadvm() and
associated helpers, which simply marks the cpu state as dirty without
actually changing anything.  i.e. it says we want to discard any existing
KVM (or HAX) state and replace it with what we're going to load.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dave Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
2017-06-06 08:53:24 +10:00
Stefan Hajnoczi ba9915e1f8 x86 and machine queue, 2017-05-11
Highlights:
 * New "-numa cpu" option
 * NUMA distance configuration
 * migration/i386 vmstatification
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZFLh3AAoJECgHk2+YTcWmppQQAJe9Y5a3VwHXqvHbwBHX2ysn
 RZDAUPd9DWpbM+UUydyKOVIZ7u5RXbbVq4E0NeCD8VYYd+grZB5Wo1cAzy3b4U2j
 2s+MDqaPMtZtGoqxTsyQOVoVxazT5Kf1zglK+iUEzik44J7LGdro+ty2Z7Ut2c11
 q9rE/GNS78czBm7c4lxgkxXW4N95K/tEGlLtDQ7uct//3U/ZimF+mO6GcbVFlOWT
 4iEbOz2sqvBVv22nLJRufiPgFNIW4hizAz5KBWxwGFCCKvT3N6yYNKKjzEpCw+jE
 lpjIRODU02yIZZZY841fLRtyrk7p4zORS8jRaHTdEJgb5bGc/YazxxVL8nzRQT1W
 VxFwAMd+UNrDkV24hpN++Ln2O+b3kwcGZ7uA/qu9d5WvSYUKXlHqcMJ35q6zuhAI
 /ecfYO7EZfVP86VjIt5IH04iV8RChA9Q6de+kQEFa6wHUxufeCOwCFqukGo8zj07
 plX8NcjnzYmSXKnYjHOHao4rKT+DiJhRB60rFiMeKP/qvKbZPjtgsIeonhHm53qZ
 /QwkhowahHKkpAnetIl0QHm8KS4YudAofMi/Fl+he4gRkEbSQVAo6iQb2L4cjcLC
 LNSDDsIVWGem4gCR+vcsFqB3lggRDfltHXm15JKh92UMpOr6RI6s8pD55T7EdnPC
 CfdxWB5kYM6/lLbOHj94
 =48wH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue, 2017-05-11

Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification

# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
  migration/i386: Remove support for pre-0.12 formats
  vmstatification: i386 FPReg
  migration/i386: Remove old non-softfloat 64bit FP support
  tests: check -numa node,cpu=props_list usecase
  numa: add '-numa cpu,...' option for property based node mapping
  numa: remove node_cpu bitmaps as they are no longer used
  numa: use possible_cpus for not mapped CPUs check
  machine: call machine init from wrapper
  numa: remove no longer need numa_post_machine_init()
  tests: numa: add case for QMP command query-cpus
  QMP: include CpuInstanceProperties into query_cpus output output
  virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
  spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
  pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
  numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
  numa: mirror cpu to node mapping in MachineState::possible_cpus
  numa: add check that board supports cpu_index to node mapping
  virt-arm: add node-id property to CPU
  pc: add node-id property to CPU
  spapr: add node-id property to sPAPR core
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15 14:12:03 +01:00
Igor Mammedov afed5a5a70 QMP: include CpuInstanceProperties into query_cpus output output
if board supports CpuInstanceProperties, report them for
each CPU thread listed. Main motivation for this is to
provide these properties introspection via QMP interface
for using in test cases to verify numa node to cpu mapping,
which includes not only boards that support cpu hotplug
and have this info in query-hotpluggable-cpus (pc/spapr)
but also for boards that don't not support hotpluggable-cpus
but support numa mapping (virt-arm).

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1494415802-227633-12-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:49 -03:00
Bharata B Rao a3e53273ad cpus: Fix CPU unplug for MTTCG
Ensure that the unplugged CPU thread is destroyed and the waiting
thread is notified about it. This is needed for CPU unplug to work
correctly in MTTCG mode.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Alex Bennée 1d05906b95 cpus: call cpu_update_icount on read
This ensures each time the vCPU thread reads the icount we update the
master timer_state.qemu_icount field. This way as long as updates are
in BQL protected sections (which they should be) the main-loop can
never come to update the log and find time has gone backwards.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:23:38 +01:00
Alex Bennée eda5f7c6a1 cpu-exec: update icount after each TB_EXIT
There is no particular reason we shouldn't update the global system
icount time as we exit each TranslationBlock run. This ensures the
main-loop doesn't have to wait until we exit to the outer loop for
executed instructions to be credited to timer_state.

The prepare_icount_for_run function is slightly tweaked to match the
logic we run in cpu_loop_exec_tb.

Based on Paolo's original suggestion.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:23:38 +01:00
Alex Bennée 512d3c8071 cpus: introduce cpu_update_icount helper
By holding off updates to timer_state.qemu_icount we can run into
trouble when the non-vCPU thread needs to know the time. This helper
ensures we atomically update timers_state.qemu_icount based on what
has been currently executed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:23:38 +01:00
Alex Bennée e4cd96571f cpus: don't credit executed instructions before they have run
Outside of the vCPU thread icount time will only be tracked against
timers_state.qemu_icount. We no longer credit cycles until they have
completed the run. Inside the vCPU thread we adjust for passage of
time by looking at how many have run so far. This is only valid inside
the vCPU thread while it is running.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:23:38 +01:00
Alex Bennée 0524838225 cpus: move icount preparation out of tcg_exec_cpu
As icount is only supported for single-threaded execution due to the
requirement for determinism let's remove it from the common
tcg_exec_cpu path.

Also remove the additional fiddling which shouldn't be required as the
icount counters should all be rectified as you enter the loop.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:23:33 +01:00
Alex Bennée 243c5f77f6 cpus: check cpu->running in cpu_get_icount_raw()
The lifetime of current_cpu is now the lifetime of the vCPU thread.
However get_icount_raw() can apply a fudge factor if called while code
is running to take into account the current executed instruction
count.

To ensure this is always the case we also check cpu->running.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-04-10 10:22:28 +01:00
Alex Bennée bf51c7206f cpus: remove icount handling from qemu_tcg_cpu_thread_fn
We should never be running in multi-threaded mode with icount enabled.
There is no point calling handle_icount_deadline here so remove it and
assert !use_icount.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-04-10 10:14:50 +01:00
Nikunj A Dadhania 8695350357 cpus: fix wrong define name
While the configure script generates TARGET_SUPPORTS_MTTCG define, one
of the define is cpus.c is checking wrong name: TARGET_SUPPORT_MTTCG

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-04-10 10:14:28 +01:00
Pranith Kumar 8cfef89271 tcg: Add a new line after incompatibility warning
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-28 10:52:50 +01:00
Vincent Palatin b3d3a426da hax: fix breakage in locking
use qemu_mutex_lock_iothread consistently in qemu_hax_cpu_thread_fn() as
done in other _thread_fn functions, instead of grabbing directly the
BQL. This way we ensure that iothread_locked is properly set.

On v2.9.0-rc0, QEMU was dying in an assertion in the mutex code when
running with '--enable-hax' either on OSX or Windows. This bug was triggered
since the code modification for multithreading added new usages of
qemu_mutex_iothread_locked.
This fixes the breakage on both platforms, I can now run again a full
Chromium OS image with HAX kernel acceleration.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <20170320101549.150076-1-vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-20 12:24:43 +01:00
Paolo Bonzini 6b8f0187a4 icount: process QEMU_CLOCK_VIRTUAL timers in vCPU thread
icount has become much slower after tcg_cpu_exec has stopped
using the BQL.  There is also a latent bug that is masked by
the slowness.

The slowness happens because every occurrence of a QEMU_CLOCK_VIRTUAL
timer now has to wake up the I/O thread and wait for it.  The rendez-vous
is mediated by the BQL QemuMutex:

- handle_icount_deadline wakes up the I/O thread with BQL taken
- the I/O thread wakes up and waits on the BQL
- the VCPU thread releases the BQL a little later
- the I/O thread raises an interrupt, which calls qemu_cpu_kick
- the VCPU thread notices the interrupt, takes the BQL to
  process it and waits on it

All this back and forth is extremely expensive, causing a 6 to 8-fold
slowdown when icount is turned on.

One may think that the issue is that the VCPU thread is too dependent
on the BQL, but then the latent bug comes in.  I first tried removing
the BQL completely from the x86 cpu_exec, only to see everything break.
The only way to fix it (and make everything slow again) was to add a dummy
BQL lock/unlock pair.

This is because in -icount mode you really have to process the events
before the CPU restarts executing the next instruction.  Therefore, this
series moves the processing of QEMU_CLOCK_VIRTUAL timers straight in
the vCPU thread when running in icount mode.

The required changes include:

- make the timer notification callback wake up TCG's single vCPU thread
  when run from another thread.  By using async_run_on_cpu, the callback
  can override all_cpu_threads_idle() when the CPU is halted.

- move handle_icount_deadline after qemu_tcg_wait_io_event, so that
  the timer notification callback is invoked after the dummy work item
  wakes up the vCPU thread

- make handle_icount_deadline run the timers instead of just waking the
  I/O thread.

- stop processing the timers in the main loop

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14 13:51:34 +01:00
Paolo Bonzini 3f53bc61a4 cpus: define QEMUTimerListNotifyCB for QEMU system emulation
There is no change for now, because the callback just invokes
qemu_notify_event.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14 13:28:29 +01:00
Alex Bennée c34c762015 cpus.c: add additional error_report when !TARGET_SUPPORT_MTTCG
While we may fail the memory ordering check later that can be
confusing. So in cases where TARGET_SUPPORT_MTTCG has yet to be
defined we should say so specifically.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-09 10:38:16 +00:00
Alex Bennée 83fd9629a3 vl/cpus: be smarter with icount and MTTCG
The sense of the test was inverted. Make it simple, if icount is
enabled then we disabled MTTCG by default. If the user tries to force
MTTCG upon us then we tell them "no".

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-03-09 10:38:02 +00:00
Paolo Bonzini 18268b6016 KVM: move SIG_IPI handling to kvm-all.c
This lets us remove a bunch of CONFIG_LINUX defines.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini 2ae41db262 KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00