This partially reverts commit 9dc20cc37d ("target/ppc: Simplify
powerpc_excp_booke"), which removed DOORI and DOORCI interrupts.
Without this patch, a -cpu e5500 -smp 2 machine booting Linux
crashes with:
qemu: fatal: Invalid PowerPC exception 36. Aborting
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220924114436.1422786-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
I am not active anymore on the PPC maintainership, degrade my self as
standard Reviewer. Also degrade PowerNV and XIVE status since I am not
funded for this work.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929180946.848721-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since commit 4047368938 "accel/tcg: Introduce tlb_set_page_full" we
have been seeing this assert
../accel/tcg/cputlb.c:1294: tlb_set_page_with_attrs: Assertion `is_power_of_2(size)' failed.
When running Tock on the OpenTitan machine.
The issue is that pmp_get_tlb_size() would return a TLB size that wasn't
a power of 2. The size was also smaller then TARGET_PAGE_SIZE.
This patch ensures that any TLB size less then TARGET_PAGE_SIZE is
rounded down to 1 to ensure it's a valid size.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221012011449.506928-1-alistair.francis@opensource.wdc.com
Message-Id: <20221012011449.506928-1-alistair.francis@opensource.wdc.com>
PLIC spec [1] requires interrupt source priority registers are WARL
field and the number of supported priority is power-of-2 to simplify SW
discovery.
Existing QEMU RISC-V machine (e.g. shakti_c) don't strictly follow PLIC
spec, whose number of supported priority is not power-of-2. Just change
each bit of interrupt priority register to WARL field when the number of
supported priority is power-of-2.
[1] https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-priorities
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The maximum priority level is hard-coded when writing to interrupt
priority register. However, when writing to priority threshold register,
the maximum priority level is from num_priorities Property which is
configured by platform.
Also change interrupt priority register to use num_priorities Property
in maximum priority level.
Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-2-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tested with https://github.com/ksco/rvv-decoder-tests
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: braces {} are necessary for all arms of this statement
Signed-off-by: Yang Liu <liuyang22@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220928051842.16207-1-liuyang22@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To enable both -kernel and -pflash options, the fw_cfg needs to be
created prior to loading the kernel.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the `rw1c` functionality to the respective
registers. The status fields are cleared when the respective
field is set.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220930033241.206581-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch addresses the coverity issues specified in [1],
as suggested, `FIELD_DP32()`/`FIELD_EX32()` macros have been
implemented to clean up the code.
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg887713.html
Fixes: Coverity CID 1488107
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220930033241.206581-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 4211fc5532 ("roms/opensbi: Remove ELF images"), the
comment for qtest check in riscv_find_firmware() is out of date.
Update it to reflect the latest status.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <BN7PR08MB435525C92550BAC5467BE672BF219@BN7PR08MB4355.namprd08.prod.outlook.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* New VNC qtest
* Fixes related to temporary file handling in the tests
* Use signal() instead of sigaction() since the latter does not work on Windows
* Some other small clean-ups
-----BEGIN PGP SIGNATURE-----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=4f+b
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu into staging
* Rework of qtests to support hot plugging tests on q35
* New VNC qtest
* Fixes related to temporary file handling in the tests
* Use signal() instead of sigaction() since the latter does not work on Windows
* Some other small clean-ups
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNGz1URHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXwxxAAoh9CeYKLyPFPe71XGsSWW4mQDkny+4CA
# AFBfcEchPSyOoTJwuSHS5cL27KkL1Wy7wTSlWdcQ2Z4LA8hexopfPtCVlizH8vQh
# hHVP5KLDY7WA7bsuRznrjUjXtjLL9mExuPm3QZ+YxH/3rNhISvq1GfC9Z5PQ/zNp
# GagCW+WiFyEYyhRHJnVVTJfZV0NCbJp9KCCJ6n/Rag80JRQiouGQsKLfRoRhvkGC
# 13dWq2NeDq9xE1k1ThUZdIpUxJO4cA+9bh6LzGOIcHX8akfkryh3NGCWuojX3XDF
# 2CRyyblfjMIp5HUcKNOrQzY1oGRn8y5537ycUkEsropSMdAccIqNwlcWO7whLEGn
# 7nbogrPt8Orezytl5ZM3WopWlge5KA2vxOUURx487LnZC2/g7l2unrCDv0c3PHDb
# U2fD5do7ZtPOl9Uz8QkYPo5CzEDnKPmPv1txOMBRcBZsvmXPZMxRWwsYavB/RloG
# nI9IvG3ZW6ivKwoPPceJberL8Ndq+pqn7y4CNNAAunHSjJ2H0YS1m1F/HfVWKJYJ
# uStXy3IZ5Qo8E+IRbPYyM68yBgrnaShuAvTSax8tWjhHOR8HetrzPABMrWylCrdo
# gaeSCEZmqf2zIYHQ2q8c7U/YrHgFNHlLz9yCyM6rZtU9dOAe52PG2TlRQomlGP76
# NKnti3RJWG4=
# =4f+b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Oct 2022 10:29:41 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu:
tests/unit/test-image-locking: Fix handling of temporary files
tests/qtest: libqtest: Install signal handler via signal()
tests/qtest: migration-test: Avoid using hardcoded /tmp
qtest: start a VNC test
tests/avocado: Add missing require_netdev('user') checks
tests/x86: Add 'q35' machine type to ivshmem-test
tests/x86: Add 'q35' machine type to drive_del-test
tests/x86: replace snprint() by g_strdup_printf() in drive_del-test
tests/x86: Fix comment typo in drive_del-test
tests/x86: Add 'q35' machine type to hotplug hd-geo-test
tests/x86: Add 'q35' machine type to override-tests in hd-geo-test
tests/x86: Refactor hot unplug hd-geo-test
tests/x86: Add subtest with 'q35' machine type to device-plug-test
tests/x86: add helper qtest_qmp_device_del_send()
tests/migration: remove the unused local variable
qtest: "-display none" is set in qtest_init()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Improve readability of audio out.voices test:
If 1 is logged and set after positive test, 1 should be tested.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221012114925.5084-3-hk@zapateado.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This has been tested under msys2 & windows 11. I haven't tried to make
it work with other environments yet, but that should be enough to
validate the channel-command implementation anyway.
Here are the changes:
- drop tests/ from fifo/pipe path, to avoid directory issues
- use g_find_program() to lookup the socat executable (otherwise we
would need to change ChanneCommand to use G_SPAWN_SEARCH_PATH, and deal
with missing socat differently)
- skip the "echo" test when socat is missing as well
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-7-marcandre.lureau@redhat.com>
The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.
Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>
Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.
As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>
The /io/channel/command/echo tests run the reader side and the writer
side with the same underlying command channel. Setting the blocking mode
of the fd/handles while the other end is already reading/writing may
create issues (deadlock in win32 when earlier attempt of this series
were using SetNamedPipeHandleState). Let's just do it before spawning
the threads to avoid further concurrency issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-4-marcandre.lureau@redhat.com>
According to msdn documentation and Linux man pages, send() should try
to send as much as possible in blocking mode, while recv() may return
earlier with a smaller available amount, we should try to continue
send/recv from there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-3-marcandre.lureau@redhat.com>
With a pipe or other reasons, read/write may return less than the
requested bytes. This happens with the test-io-channel-command test on
Windows. glib spawn code uses a binary pipe of 4096 bytes, and the first
read returns that much (although more are requested), for some unclear
reason...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-2-marcandre.lureau@redhat.com>
As described in:
https://learn.microsoft.com/en-us/visualstudio/debugger/how-to-set-a-thread-name-in-native-code?view=vs-2022
SetThreadDescription() is available since Windows 10, version 1607 and
in some versions only by "Run Time Dynamic Linking". Its declaration is
not yet in mingw, so we lookup the function the same way glib does.
Tested with Visual Studio Community 2022 debugger.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
The patch adds "show_menubar" command line option for GTK UI similar to
"show_tabs". This option allows to hide menu bar initially, it still can
be toggled by shortcut and other shortcuts still work.
Signed-off-by: Bryce Mills <brycemills@proton.me>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A zero value for dpi will lead to a division by zero in qemu_edid_dpi_to_mm().
Tested by runnig qemu-edid -dX, X = 0, 100.
Resolves: qemu-project/qemu#1249
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Message-Id: <20221011151216.64897-1-smitterl@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
test-image-locking leaves some temporary files around - clean
them up. While we're at it, test-image-locking is a unit test,
so it should not use "qtest.*" for temporary file names. Give
them better names instead, so that it clear where the temporary
files come from.
Message-Id: <20221012085932.799221-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Although the grab menu item represents the tabbed displays, the old
implicit mouse ungrabbing logic changes the grab menu item even for
an untabbed display.
Leave the grab menu item when implicitly ungrabbing mouse for an
untabbed display. The new ungrabbing logic introduced in
gd_mouse_mode_change() strictly follows the corresponding grabbing
logic found in gd_button_event().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221008140116.11473-1-akihiko.odaki@daynix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While being at it add a #define for the magic 0x1040 number.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
Drop the list of modern virtio devices and explain how they
are calculated instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-5-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
Add new firmware feature flags for the recently added confidential
computing operating modes by amd and intel.
While being at it also fix the path to the amd sev documentation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20220930133220.1771336-1-kraxel@redhat.com>
At present the codes uses sigaction() to install signal handler with
a flag SA_RESETHAND. Such usage can be covered by the signal() API
that is a simplified interface to the general sigaction() facility.
Update to use signal() to install the signal handler, as it is
available on Windows which we are going to support.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006151927.2079583-11-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_dir_make_tmp() for a portable implementation.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006151927.2079583-5-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is some of the simplest test we could perform, it simply connects
to the VNC server via passed-in socket FDs and checks the connection can
be established.
Another series will make this test work on Windows as well.
As always, more tests can be added later! :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006130513.2683873-1-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 730fe750fb.
Unconditionally building all the bios for all arches was a little too
far too fast.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221011113417.794841-4-alex.bennee@linaro.org>
Some avocado tests fail if QEMU was built without libslirp. Add
require_netdev('user') checks where necessary:
These tests try to ping 10.0.2.2 and expect it to succeed:
boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2
boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_sd
ppc_bamboo.py:BambooMachine.test_ppc_bamboo
These tests run a commandline that includes '-net user':
machine_aspeed.py:AST2x00Machine.test_arm_ast2500_evb_builroot
(and others that use the do_test_arm_aspeed_buidroot_start()
or do_test_arm_aspeed_sdk_start() helper functions)
These changes seem to be sufficient for 'make check-avocado'
to not fail on a --disable-slirp build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221001195224.2453581-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A thread often fails to bind an egl context to itself after guest VM is
rebooted because the context is still owned by another thread. It is not
very clear what condition makes this happen but this can be prevented
by unbinding the context from the thread in the end of gd_egl_switch.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220928215805.4661-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extended ClientCutText messages start with a 4-byte header. If len < 4,
an integer underflow occurs in vnc_client_cut_text_ext. The result is
used to decompress data in a while loop in inflate_buffer, leading to
CPU consumption and denial of service. Prevent this by checking dlen in
protocol_client_msg.
Fixes: CVE-2022-3165
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Reported-by: TangPeng <tangpeng@qianxin.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20220925204511.1103214-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Configure pci bridge setting to test ivshmem on 'q35'.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-10-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
