CID 1458134: Integer handling issues (BAD_SHIFT)
In expression "1 << ctz64(container->pgsizes)", left shifting by more
than 31 bits has undefined behavior. The shift amount,
"ctz64(container->pgsizes)", is 64.
Commit 5e3b981c33 ("vfio: Support for RamDiscardManager in the !vIOMMU
case") added an assertion that our granularity is at least as big as the
page size.
Although unlikely, we could have a page size that does not fit into
32 bit. In that case, we'd try shifting by more than 31 bit.
Let's use 1ULL instead and make sure we're not shifting by more than 63
bit by asserting that any bit in container->pgsizes is set.
Fixes: CID 1458134
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Link: https://lore.kernel.org/r/20210712083135.15755-1-david@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We support coordinated discarding of RAM using the RamDiscardManager for
the VFIO_TYPE1 iommus. Let's unlock support for coordinated discards,
keeping uncoordinated discards (e.g., via virtio-balloon) disabled if
possible.
This unlocks virtio-mem + vfio on x86-64. Note that vfio used via "nvme://"
by the block layer has to be implemented/unlocked separately. For now,
virtio-mem only supports x86-64; we don't restrict RamDiscardManager to
x86-64, though: arm64 and s390x are supposed to work as well, and we'll
test once unlocking virtio-mem support. The spapr IOMMUs will need special
care, to be tackled later, e.g.., once supporting virtio-mem.
Note: The block size of a virtio-mem device has to be set to sane sizes,
depending on the maximum hotplug size - to not run out of vfio mappings.
The default virtio-mem block size is usually in the range of a couple of
MBs. The maximum number of mapping is 64k, shared with other users.
Assume you want to hotplug 256GB using virtio-mem - the block size would
have to be set to at least 8 MiB (resulting in 32768 separate mappings).
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-14-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
vIOMMU support works already with RamDiscardManager as long as guests only
map populated memory. Both, populated and discarded memory is mapped
into &address_space_memory, where vfio_get_xlat_addr() will find that
memory, to create the vfio mapping.
Sane guests will never map discarded memory (e.g., unplugged memory
blocks in virtio-mem) into an IOMMU - or keep it mapped into an IOMMU while
memory is getting discarded. However, there are two cases where a malicious
guests could trigger pinning of more memory than intended.
One case is easy to handle: the guest trying to map discarded memory
into an IOMMU.
The other case is harder to handle: the guest keeping memory mapped in
the IOMMU while it is getting discarded. We would have to walk over all
mappings when discarding memory and identify if any mapping would be a
violation. Let's keep it simple for now and print a warning, indicating
that setting RLIMIT_MEMLOCK can mitigate such attacks.
We have to take care of incoming migration: at the point the
IOMMUs get restored and start creating mappings in vfio, RamDiscardManager
implementations might not be back up and running yet: let's add runstate
priorities to enforce the order when restoring.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Although RamDiscardManager can handle running into the maximum number of
DMA mappings by propagating errors when creating a DMA mapping, we want
to sanity check and warn the user early that there is a theoretical setup
issue and that virtio-mem might not be able to provide as much memory
towards a VM as desired.
As suggested by Alex, let's use the number of KVM memory slots to guess
how many other mappings we might see over time.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-9-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's query the maximum number of possible DMA mappings by querying the
available mappings when creating the container (before any mappings are
created). We'll use this informaton soon to perform some sanity checks
and warn the user.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-8-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement support for RamDiscardManager, to prepare for virtio-mem
support. Instead of mapping the whole memory section, we only map
"populated" parts and update the mapping when notified about
discarding/population of memory via the RamDiscardListener. Similarly, when
syncing the dirty bitmaps, sync only the actually mapped (populated) parts
by replaying via the notifier.
Using virtio-mem with vfio is still blocked via
ram_block_discard_disable()/ram_block_discard_require() after this patch.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Set _SAVING flag for device state from vmstate change handler when it
gets called from savevm.
Currently State transition savevm/suspend is seen as:
_RUNNING -> _STOP -> Stop-and-copy -> _STOP
State transition savevm/suspend should be:
_RUNNING -> Stop-and-copy -> _STOP
State transition from _RUNNING to _STOP occurs from
vfio_vmstate_change() where when vmstate changes from running to
!running, _RUNNING flag is reset but at the same time when
vfio_vmstate_change() is called for RUN_STATE_SAVE_VM, _SAVING bit
should be set.
Reported by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Message-Id: <1623177441-27496-1-git-send-email-kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the vfio_migration_init(), the SaveVMHandler is registered for
VFIO device. But it lacks the operation of 'unregister'. It will
lead to 'Segmentation fault (core dumped)' in
qemu_savevm_state_setup(), if performing live migration after a
VFIO device is hot deleted.
Fixes: 7c2f5f75f9 (vfio: Register SaveVMHandlers for VFIO device)
Reported-by: Qixin Gan <ganqixin@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-Id: <20210527123101.289-1-jiangkunkun@huawei.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vfio_ccw_unrealize() routine makes an unconditional attempt to
unregister every IRQ notifier, though they may not have been registered
in the first place (when running on an older kernel, for example).
Let's mirror this behavior in the error cleanups in vfio_ccw_realize()
so that if/when new IRQs are added, it is less confusing to recognize
the necessary procedures. The worst case scenario would be some extra
messages about an undefined IRQ, but since this is an error exit that
won't be the only thing to worry about.
And regarding those messages, let's change it to a warning instead of
an error, to better reflect their severity. The existing code in both
paths handles everything anyway.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210428143652.1571487-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 690e29b911 ("vfio-ccw: Refactor ccw irq handler") changed
one of the checks for the IRQ notifier registration from saying
"the host needs to recognize the only IRQ that exists" to saying
"the host needs to recognize ANY IRQ that exists."
And this worked fine, because the subsequent change to support the
CRW IRQ notifier doesn't get into this code when running on an older
kernel, thanks to a guard by a capability region. The later addition
of the REQ(uest) IRQ by commit b2f96f9e4f ("vfio-ccw: Connect the
device request notifier") broke this assumption because there is no
matching capability region. Thus, running new QEMU on an older
kernel fails with:
vfio: unexpected number of irqs 2
Let's adapt the message here so that there's a better clue of what
IRQ is missing.
Furthermore, let's make the REQ(uest) IRQ not fail when attempting
to register it, to permit running vfio-ccw on a newer QEMU with an
older kernel.
Fixes: b2f96f9e4f ("vfio-ccw: Connect the device request notifier")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210421152053.2379873-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The include/hw/hw.h header only has a prototype for hw_error(),
so it does not make sense to include this in files that do not
use this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210326151848.2217216-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For now the switch of vfio dirty page tracking is integrated into
@vfio_save_handler. The reason is that some PCI vendor driver may
start to track dirty base on _SAVING state of device, so if dirty
tracking is started before setting device state, vfio will report
full-dirty to QEMU.
However, the dirty bmap of all ramblocks are fully set when setup
ram saving, so it's not matter whether the device is in _SAVING
state when start vfio dirty tracking.
Moreover, this logic causes some problems [1]. The object of dirty
tracking is guest memory, but the object of @vfio_save_handler is
device state, which produces unnecessary coupling and conflicts:
1. Coupling: Their saving granule is different (perVM vs perDevice).
vfio will enable dirty_page_tracking for each devices, actually
once is enough.
2. Conflicts: The ram_save_setup() traverses all memory_listeners
to execute their log_start() and log_sync() hooks to get the
first round dirty bitmap, which is used by the bulk stage of
ram saving. However, as vfio dirty tracking is not yet started,
it can't get dirty bitmap from vfio. Then we give up the chance
to handle vfio dirty page at bulk stage.
Move the switch of vfio dirty_page_tracking into vfio_memory_listener
can solve above problems. Besides, Do not require devices in SAVING
state for vfio_sync_dirty_bitmap().
[1] https://www.spinics.net/lists/kvm/msg229967.html
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210309031913.11508-1-zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The cpu_physical_memory_set_dirty_lebitmap() can quickly deal with
the dirty pages of memory by bitmap-traveling, regardless of whether
the bitmap is aligned correctly or not.
cpu_physical_memory_set_dirty_lebitmap() supports pages in bitmap of
host page size. So it'd better to set bitmap_pgsize to host page size
to support more translation granule sizes.
[aw: The Fixes commit below introduced code to restrict migration
support to configurations where the target page size intersects the
host dirty page support. For example, a 4K guest on a 4K host.
Due to the above flexibility in bitmap handling, this restriction
unnecessarily prevents mixed target/host pages size that could
otherwise be supported. Use host page size for dirty bitmap.]
Fixes: 87ea529c50 ("vfio: Get migration capability flags for container")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-Id: <20210304133446.1521-1-jiangkunkun@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In VFIO migration resume phase and some guest startups, there are
already unmasked vectors in the vector table when calling
vfio_msix_enable(). So in order to avoid inefficiently disabling
and enabling vectors repeatedly, let's allocate all needed vectors
first and then enable these unmasked vectors one by one without
disabling.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Message-Id: <20210310030233.1133-4-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the VFIO VM state change handler when stopping the VM, the _RUNNING
bit in device_state is cleared which makes the VFIO device stop, including
no longer generating interrupts. Then we can save the pending states of
all interrupts in the GIC VM state change handler (on ARM).
So we have to set the priority of the VFIO VM state change handler
explicitly (like virtio devices) to ensure it is called before the
GIC's in saving.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210310030233.1133-3-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On ARM64 the VFIO SET_IRQS ioctl is dependent on the VM interrupt
setup, if the restoring of the VFIO PCI device config space is
before the VGIC, an error might occur in the kernel.
So we move the saving of the config space to the non-iterable
process, thus it will be called after the VGIC according to
their priorities.
As for the possible dependence of the device specific migration
data on it's config space, we can let the vendor driver to
include any config info it needs in its own data stream.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Message-Id: <20210310030233.1133-2-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In an attempt to fix smmu/virtio-iommu - vhost regression, commit
958ec334bc ("vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support")
broke virtio-iommu integration. This is due to the fact VFIO registers
IOMMU_NOTIFIER_ALL notifiers, which includes IOMMU_NOTIFIER_DEVIOTLB_UNMAP
and this latter now is rejected by the virtio-iommu. As a consequence,
the registration fails. VHOST behaves like a device with an ATC cache. The
VFIO device does not support this scheme yet.
Let's register only legacy MAP and UNMAP notifiers.
Fixes: 958ec334bc ("vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210209213233.40985-2-eric.auger@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the word "blacklist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210205171817.2108907-9-philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There is an obvious typo in the function name of the .log_sync() callback.
Spell it correctly.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204014240.772-1-yuzenghui@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A pwrite() call returns the number of bytes written (or -1 on error),
and vfio-ccw compares this number with the size of the region to
determine if an error had occurred or not.
If they are not equal, this is a failure and the errno is used to
determine exactly how things failed. An errno of zero is possible
(though unlikely) in this situation and would be translated to a
successful operation.
If they ARE equal, the ret_code field is read from the region to
determine how to proceed. While the kernel sets the ret_code field
as necessary, the region and thus this field is not "written back"
to the user. So the value can only be what it was initialized to,
which is zero.
So, let's convert an unexpected length with errno of zero to a
return code of -EFAULT, and explicitly set an expected length to
a return code of zero. This will be a little safer and clearer.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210303160739.2179378-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Those flags can be used to express different requirements for the
display or other needs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-12-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that the vfio-ccw code has a notifier interface to request that
a device be unplugged, let's wire that together.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210104202057.48048-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
The function will be moved to common QOM code, as it is not
specific to TYPE_DEVICE anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-31-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every single qdev property setter function manually checks
dev->realized. We can just check dev->realized inside
qdev_property_set() instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-24-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make the code more generic and not specific to TYPE_DEVICE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
By default dirty pages tracking is enabled during iterative phase
(pre-copy phase).
Added per device opt-out option 'x-pre-copy-dirty-page-tracking' to
disable dirty pages tracking during iterative phase. If the option
'x-pre-copy-dirty-page-tracking=off' is set for any VFIO device, dirty
pages tracking during iterative phase will be disabled.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Support for migration of vfio devices is still in flux. Developers
are attempting to add support for new devices and new architectures,
but none are yet readily available for validation. We have concerns
whether we're transferring device resources at the right point in the
migration, whether we're guaranteeing that updates during pre-copy are
migrated, and whether we can provide bit-stream compatibility should
any of this change. Even the question of whether devices should
participate in dirty page tracking during pre-copy seems contentious.
In short, migration support has not had enough soak time and it feels
premature to mark it as supported.
Create an experimental option such that we can continue to develop.
[Retaining previous acks/reviews for a previously identical code
change with different specifics in the commit log.]
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix also a similar typo in a code comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117193448.393472-1-sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IOMMUs may declare memory regions spanning from 0 to UINT64_MAX. When
attempting to deal with such region, vfio_listener_region_del() passes a
size of 2^64 to int128_get64() which throws an assertion failure. Even
ignoring this, the VFIO_IOMMU_DMA_MAP ioctl cannot handle this size
since the size field is 64-bit. Split the request in two.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-11-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set IOMMU supported page size mask same as host Linux supported page
size mask.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-9-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The type of input variable is unsigned int
while the printer type is int. So fix incorrect print type.
Signed-off-by: Zhengui li <lizhengui@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that VFIO_DEVICE_GET_INFO supports capability chains, add a helper
function to find specific capabilities in the chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The underlying host may be limiting the number of outstanding DMA
requests for type 1 IOMMU. Add helper functions to check for the
DMA available capability and retrieve the current number of DMA
mappings allowed.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: vfio_get_info_dma_avail moved inside CONFIG_LINUX]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rather than duplicating the same loop in multiple locations,
create a static function to do the work.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the device is not a failover primary device, call
vfio_migration_probe() and vfio_migration_finalize() to enable
migration support for those devices that support it respectively to
tear it down again.
Removed migration blocker from VFIO PCI device specific structure and use
migration blocker from generic structure of VFIO device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
