Commit Graph

105 Commits

Author SHA1 Message Date
Paolo Bonzini e4efd8a488 qemu-timer: initialize "timers_done_ev" to set
The normal value for the event is to be set.  If we do not do
this, pause_all_vcpus (through qemu_clock_enable) hangs unless
timerlist_run_timers has been run at least once for the timerlist.
This can happen with the following patches, that make aio_notify do
nothing most of the time.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-22 12:41:32 +01:00
Paul Donohue fb1a3a051d qemu-timer: Call clock reset notifiers on forward jumps
Commit 691a0c9c introduced a mechanism by which QEMU_CLOCK_HOST can
notify other parts of the emulator when the host clock has jumped
backward.  This is used to avoid stalling timers that were scheduled
based on the host clock.

However, if the host clock jumps forward, then timers that were
scheduled based on the host clock may fire rapidly and cause other
problems.  For example, the mc146818rtc periodic timer will block
execution of the VM and consume host CPU while firing every interrupt
for the time period that was skipped by the host clock.

To correct that problem, this commit fires the reset notification if the
host clock jumps forward by more than a hard-coded limit.  The limit is
currently set to a value of 60 seconds, which should be small enough to
prevent excessive timer loops, but large enough to avoid frequent resets
in idle VMs.

Signed-off-by: Paul Donohue <qemu-git@PaulSD.com>
Message-Id: <20150612140845.GD2749@TopQuark.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:27:14 +02:00
Peter Maydell 1ac0206b2a qemu-timer.c: Trim list of included headers
qemu-timer.c was including a lot more headers than it needed to,
presumably for historical reasons. In particular, it included
ui/console.h; this now tries to pull in <pixman.h>, which will
cause a compilation failure in --disable-tools --disable-system
configurations when running "make check" (which builds qemu-timer.c,
even though the linux-user binaries themselves don't need it).

Fix this build failure by trimming down the set of included
headers severely -- we only really need main-loop.h and timer.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421770600-17525-1-git-send-email-peter.maydell@linaro.org
2015-01-26 18:15:54 +00:00
Paolo Bonzini cd1bd53a66 qemu-timer: introduce timer_deinit
In some cases, a timer was set to NULL so that we could check if it is
initialized.  Use the timer_list field instead, and add a timer_deinit
function that NULLs it.

It then makes sense that timer_del be a no-op (instead of a crasher) on
such a de-initialized timer.  It avoids the need to poke at the timerlist
field to check if the timers are initialized.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:22:44 +01:00
Paolo Bonzini f186aa976b qemu-timer: rename timer_init to timer_init_tl
timer_init is not called that often.  Free the name for an equivalent
of timer_new.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-14 10:38:57 +01:00
Peter Maydell dfa9c2a0f4 - Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
 - small i386 patches
 - PCI SD host controller support
 - malloc/free cleanups from Markus (x86/scsi)
 - IvyBridge model
 - XSAVES support for KVM
 - initial patches from record/replay
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
 HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
 D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
 BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
 0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
 vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
 =ncys
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay

# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
  sdhci: Support SDHCI devices on PCI
  sdhci: Define SDHCI PCI ids
  sdhci: Add "sysbus" to sdhci QOM types and methods
  sdhci: Remove class "virtual" methods
  sdhci: Set a default frequency clock
  serial: only resample THR interrupt on rising edge of IER.THRI
  serial: update LSR on enabling/disabling FIFOs
  serial: clean up THRE/TEMT handling
  serial: reset thri_pending on IER writes with THRI=0
  linuxboot: fix loading old kernels
  kvm/apic: fix 2.2->2.1 migration
  target-i386: add Ivy Bridge CPU model
  target-i386: add f16c and rdrand to Haswell and Broadwell
  target-i386: add VME to all CPUs
  pc: add 2.3 machine types
  i386: do not cross the pages boundaries in replay mode
  cpus: make icount warp behave well with respect to stop/cont
  timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
  cpu-exec: invalidate nocache translation if they are interrupted
  icount: introduce cpu_get_icount_raw
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-15 16:43:42 +00:00
Pavel Dovgalyuk 4e7fa73ec2 timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
This patch introduces new QEMU_CLOCK_VIRTUAL_RT clock, which
should be used for icount warping.  In the next patch, it
will be used to avoid a huge icount warp when a virtual
machine is stopped for a long time.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:02 +01:00
Peter Maydell 490309fcfb qemu-timer: Avoid overflows when converting timeout to struct timespec
In qemu_poll_ns(), when we convert an int64_t nanosecond timeout into
a struct timespec, we may accidentally run into overflow problems if
the timeout is very long. This happens because the tv_sec field is a
time_t, which is signed, so we might end up setting it to a negative
value by mistake. This will result in what was intended to be a
near-infinite timeout turning into an instantaneous timeout, and we'll
busy loop. Cap the maximum timeout at INT32_MAX seconds (about 68 years)
to avoid this problem.

This specifically manifested on ARM hosts as an extreme slowdown on
guest shutdown (when the guest reprogrammed the PL031 RTC to not
generate alarms using a very long timeout) but could happen on other
hosts and guests too.

Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1416939705-1272-1-git-send-email-peter.maydell@linaro.org
2014-11-27 11:31:58 +00:00
Kirill Batuzov 02ce232c50 vl.c: remove init_clocks call from main
Clocks are initialized in qemu_init_main_loop. They are not needed before it.
Initializing them twice is not only unnecessary but is harmful: it results in
memory leak and potentially can lead to a situation where different parts of
QEMU use different sets of timers.

To avoid it remove init_clocks call from main and add an assertion to
qemu_clock_init that corresponding clock has not been initialized yet.

Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-09 20:57:32 +02:00
Stefan Weil fbdb664cb6 qemu-timer: Add missing 'static' attribute
This fixes a warning from the static code analysis (smatch).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-07 21:00:43 +04:00
Paolo Bonzini add40e9777 timer: add timer_mod_anticipate and timer_mod_anticipate_ns
These let a user anticipate the deadline of a timer, atomically with
other sites that call the function.  This helps avoiding complicated
lock hierarchies.

Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-17 17:31:00 +02:00
Paolo Bonzini 0f809e5fbe timer: extract timer_mod_ns_locked and timerlist_rearm
These will be reused in timer_mod_anticipate functions.

Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-17 17:30:59 +02:00
Liu Ping Fan 3c05341157 timer: make qemu_clock_enable sync between disable and timer's cb
After disabling the QemuClock, we should make sure that no QemuTimers
are still in flight. To implement that with light overhead, we resort
to QemuEvent. The caller of disabling will wait on QemuEvent of each
timerlist.

Note, qemu_clock_enable(foo,false) can _not_ be called from timer's cb.
Also, the callers of qemu_clock_enable() should be protected by the BQL.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-17 17:30:56 +02:00
Paolo Bonzini 3db1ee7c2a qemu-timer: do not take the lock in timer_pending
We can deduce the result from expire_time, by making it always -1 if
the timer is not in the active_timers list.  We need to check against
negative times passed to timer_mod_ns; clamping them to zero is not
a problem because the only clock that has a zero value at VM startup
is QEMU_CLOCK_VIRTUAL, and it is monotonic so it cannot be non-zero.
QEMU_CLOCK_HOST, instead, is not monotonic but it cannot go to negative
values unless the host time is seriously screwed up and points to
the 1960s.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-18 15:48:33 +02:00
Stefan Hajnoczi 978f2205c7 qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers.  This allows qemu_timer_mod_ns() to be called from any
thread.

Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.

The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-18 15:48:33 +02:00
Stefan Hajnoczi da718ceb17 qemu-timer: drop outdated signal safety comments
host_alarm_handler() is invoked from the signal processing thread
(currently the iothread).  Previously we did processing in a real signal
handler with signalfd and therefore needed signal-safe timer code.

Today host_alarm_handler() just marks the alarm timer as expired/pending
and notifies the main loop using qemu_notify_event().

Therefore these outdated comments about signal safety can be dropped.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-18 15:48:33 +02:00
Alex Bligh b4049b74b9 aio / timers: Remove legacy interface
Remove the legacy interface from include/qemu/timers.h.

Ensure struct QEMUClock is not exposed at all.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh 7bf8fbde44 aio / timers: Remove main_loop_timerlist
Now we have timerlistgroups implemented and main_loop_tlg, we
no longer need the concept of a default timer list associated
with each clock. Remove it and simplify initialisation of
clocks and timer lists.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh 40daca54cd aio / timers: Rearrange timer.h & make legacy functions call non-legacy
Rearrange timer.h so it is in order by function type.

Make legacy functions call non-legacy functions rather than vice-versa.

Convert cpus.c to use new API.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh 63111b69cc aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:55 +02:00
Alex Bligh 6d32717155 aio / timers: Remove alarm timers
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:55 +02:00
Alex Bligh ac70aafc28 aio / timers: Use all timerlists in icount warp calculations
Notify all timerlists derived from vm_clock in icount warp
calculations.

When calculating timer delay based on vm_clock deadline, use
all timerlists.

For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.

NB: thread safety - when different timerlists sit on different
threads, this will need some locking.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh b1bbfe72ec aio / timers: On timer modification, qemu_notify or aio_notify
On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.

On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh d5541d8680 aio / timers: Add a notify callback to QEMUTimerList
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:28 +02:00
Alex Bligh 754d6a544d aio / timers: Add QEMUTimerListGroup and helper functions
Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh ff83c66ecc aio / timers: Split QEMUClock into QEMUClock and QEMUTimerList
Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.

Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.

Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.

Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.

Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh f9a976b740 aio / timers: Make qemu_run_timers and qemu_run_all_timers return progress
Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh cd758dd0ac aio / timers: Add prctl(PR_SET_TIMERSLACK, 1, ...) to reduce timer slack
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Alex Bligh 4e0c6529fc aio / timers: add ppoll support with qemu_poll_ns
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:26 +02:00
Alex Bligh 043a7e1f8f aio / timers: Consistent treatment of disabled clocks for deadlines
Make treatment of disabled clocks consistent in deadline calculation

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Alex Bligh 02a03a9f12 aio / timers: add qemu-timer.c utility functions
Add utility functions to qemu-timer.c for nanosecond timing.

Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.

Add utility function qemu_soonest_timeout to calculate soonest deadline.

Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Alex Bligh 58ac56b9ad aio / timers: Rename qemu_new_clock and expose clock types
Rename qemu_new_clock to qemu_clock_new.

Expose clock types.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Alex Bligh e93379b039 aio / timers: Rename qemu_timer_* functions
Rename four functions in preparation for new API.

Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 15:58:05 +02:00
Paolo Bonzini 0727b86754 qemu-timer: move timeBeginPeriod/timeEndPeriod to os-win32
These are needed for any of the Win32 alarm timer implementations.
They are not tied to mmtimer exclusively.

Jacob tested this patch with both mmtimer and Win32 timers.

Cc: qemu-stable@nongnu.org
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2013-04-12 18:27:16 +02:00
Paolo Bonzini 9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini 83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 28ecbaeecb ui: move files to ui/ and include/ui/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:30 +01:00
Paolo Bonzini 7fa22f2bf7 net: do not include net.h everywhere
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:59 +01:00
Stefan Weil 253ecf83bc qemu-timer: Fix compilation for non-POSIX hosts
A compiler warning is caused by the unused local function reinit_timers
on non-POSIX hosts. Include that function only for POSIX hosts.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10 12:28:52 +00:00
Anthony Liguori 30ea833941 build: pthread_atfork() needs include of pthread.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-04 15:13:47 -06:00
Paolo Bonzini c8122c35e6 qemu-timer: reinitialize timers after fork
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-02 13:07:54 -05:00
Paolo Bonzini f563a5d7a8 Merge remote-tracking branch 'origin/master' into threadpool
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-31 10:42:51 +01:00
Paolo Bonzini 744ca8e375 qemu-timer: make initialization functions idempotent
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:18:44 +01:00
Richard Henderson 1e9737da4a qemu-timer: Check for usable fields for SIGEV_THREAD_ID
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID.  We need configure to check for
both before using it.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-28 14:54:25 +01:00
Paolo Bonzini 144b97c26c qemu-timer: simplify qemu_run_timers
ptimer_head is an invariant pointer to clock->active_timers.
Remove it, and just reference clock->active_timers directly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-23 07:11:29 +01:00
Paolo Bonzini de188751da qemu-timer: properly arm alarm timer for timers set by device initialization
QEMU will hang when fed the following command-line

  qemu-system-mips -kernel vmlinux-2.6.32-5-4kc-malta -append "console=ttyS0" -nographic -net none

The -net none is important otherwise it seems some events are generated
causing the things to work. When it doesn't work, the guest hangs when
measuring the CPU frequency, after the following line:

  [    0.000000] NR_IRQS:256

Pressing a key on the serial port unblocks it, hinting that the problem
is due to the recent elimination of the 1 second timeout in the main
loop.

The problem is that because init_timer_alarm sets the timer's pending
flag to true, the alarm timer is never armed until after the first time
through the main loop.  Thus the bug started when QEMU started testing
the pending flag in qemu_mod_timer (commit 1828be3, more alarm timer
cleanup, 2010-03-10).

But actually, it isn't true at all that a timer is pending when the
alarm timer is created, and the real bug has been latent forever: the
fix is to remove the bogus setting of pending flag.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-04 12:30:28 +02:00
Stefano Stabellini 8227421e04 qemu_rearm_alarm_timer: do not call rearm if the next deadline is INT64_MAX
qemu_rearm_alarm_timer partially duplicates the code in
qemu_next_alarm_deadline to figure out if it needs to rearm the timer.
If it calls qemu_next_alarm_deadline, it always rearms the timer even if
the next deadline is INT64_MAX.

This patch simplifies the behavior of qemu_rearm_alarm_timer and removes
the duplicated code, always calling qemu_next_alarm_deadline and only
rearming the timer if the deadline is less than INT64_MAX.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09 18:42:38 +00:00
Peter Maydell c8057f951d Support 'help' as a synonym for '?' in command line options
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.

This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".

Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.

We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-02 13:16:42 -05:00
Stefan Weil 52ef651f56 qemu-timer: Fix wrong error message
Function timeSetEvent returns 0 when it fails, but it does not set
an error code which can be retrieved by GetLastError.

Therefore calling GetLastError is useless.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-05-14 07:27:24 +02:00