gcc will silently accept unrecognized -Wno-wombat warning suppression
options (it only mentions them if it has to print a compiler warning
for some other reason). Since we already run a check for whether gcc
recognizes the warning options we use, we can easily make this use
the positive sense of the option when checking for support for the
suppression option. This doesn't have any effect except that it avoids
gcc emitting extra messages about unrecognized command line options
when it is printing other warning messages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID. We need configure to check for
both before using it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.
Change detection code to use return value of pipe2.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
[0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit 38f419f352 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa18. But while techinically
that fix has been correct, all other similar variables are handled
differently. Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This modification is required if compiler option -Wunused-parameter is activated.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* stefanha/trivial-patches:
vnc: fix "info vnc" with "-vnc ..., reverse=on"
sheepdog: use bool for boolean variables
configure: Tidy up remnants of non-64-bit physaddrs
* mdroth/qga-pull-10-9-12:
qemu-ga: ga_open_pidfile(): add new line to pidfile
qemu-ga: use state dir from CONFIG_QEMU_LOCALSTATEDIR
configure: add --localstatedir
All TCG hosts now support guest-base functionality, so we can
remove the setting of host_guest_base to 'yes' in every arm
of the case "$cpu" statement, and simply set guest_base to
default to 'yes'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Tidy up some remnants of code to support non-64-bit physaddrs
which were accidentally omitted from commit 4be403c8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Next commit wants to use it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4. The new features available require a recent spice-server
version, so raise up the bar. Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.
Clear out a big bunch of #ifdefs which are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Specifying an empty target list with --target-list= is shorter
than specifying --disable-user --disable-system.
Both variants should give the same result: no targets at all.
This modification implements that feature.
It uses a trick which works with POSIX compliant shells to test whether
target_list is undefined (=> default targets) or empty (=> no targets).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
* kraxel/usb.66:
usb: Fix usb_packet_map() in the presence of IOMMUs
usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
ehci: Fix interrupt packet MULT handling
xhci: create a memory region for each port
xhci: route string & usb hub support
xhci: tweak limits
compat: turn off msi/msix on xhci for old machine types
add pc-1.3 machine type
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
GlusterFS support in QEMU depends on libgfapi, libgfrpc and
libgfxdr provided by GlusterFS.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The usbredir 0.5 release introduced the new API for 64 bit packet ids, but
it kept the libusbredirparser.pc name as is, meaning that older versions of
qemu will still have their pkg-config check for usbredirparser fulfilled,
and build with the usb-redir device. Due to the API change there will be
some compiler warnings, but the build will succeed, however the usb-redir
device will be broken on 32 bit machines.
To solve this a new usbredir-0.5.2 release is coming, which renames the
libusbredirparser.pc file to libusbredirparser-0.5.pc, so that it will no
longer fulfill the pkg-config check of the qemu-1.2 and older releases,
stopping the (silent) breakage. This patch adjusts qemu master's configure
to properly detect the new usbredir release.
Changes in v2:
-Not only use the new .pc name in the check but also when getting cflags
and libs!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with
configure' '--disable-user' '--disable-system'
This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use -ffixed-gN. Don't link statically. Don't save/restore
AREG0 around calls. Don't allocate space on the stack for AREG0 save.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current code doesn't actually work in 32-bit mode at all. Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS
Signed-off-by: Richard Henderson <rth@twiddle.net>
* 'usb.65' of git://git.kraxel.org/qemu:
uhci: Don't queue up packets after one with the SPD flag set
usb-redir: Revert usb-redir part of commit 93bfef4c
usb-redir: Add chardev open / close debug logging
usb-redir: Add support for migration
usb-redir: Store max_packet_size in endp_data
usb-redir: Add an already_in_flight packet-id queue
usb-redir: Change cancelled packet code into a generic packet-id queue
ehci: Walk async schedule before and after migration
ehci: Don't set seen to 0 when removing unseen queue-heads
configure: usbredir fixes
ehci: Don't process too much frames in 1 timer tick (v2)
ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
ehci: switch to new-style memory ops
usb-host: allow emulated (non-async) control requests without USBPacket
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
This reverts commit 66d5499b37.
This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixes build against uClibc.
uClibc provides 2 versions of clock_gettime(), one with realtime
support and one without (this is so you can avoid linking in -lrt
unless actually needed). This means that the clock_gettime() don't
need -lrt. We still need it for timer_create() so we check for this
function in addition.
We also need check if -lm is needed for isnan().
Both -lm and -lrt are needed for libs_qga.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently, if libseccomp is missing but the user explicitly requested
seccomp support using --enable-seccomp, configure silently ignores the
situation and disables seccomp support.
This is unlike all other tests that explicitly fail in such situation.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
usbredir is only used by system emulation, so add the libraries to
libs_softmmu instead of LIBS.
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.
Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.
The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This gives us support for 64 bit ids which is needed for using XHCI with
the new hcd generated ids.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qemu-img, qemu-nbd and qemu-io tools are built conditionally
based on whether any softmmu target is enabled. These are useful
self-contained tools which can be used in many other scenarios.
Add new --enable-tools/--disable-tools args to configure to allow
the user to explicitly turn on / off their build. The default
behaviour is now to build these tools are all times, regardless
of whether any softmmu target is enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow passing of '--target-list=' to configure to request that
all targets are to be disabled. This allows for doing a very
fast tools-only build of things like qemu-img, qemu-io, qemu-nbd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
kvm: i386: Add classic PCI device assignment
kvm: i386: Add services required for PCI device assignment
kvm: Introduce kvm_has_intx_set_mask
kvm: Introduce kvm_irqchip_update_msi_route
kvm: Clean up irqfd API
qemu: Use valgrind annotations to mark kvm guest memory as defined
Commit 7b93fadf3a "Add basic version
of bridge helper" put the bridge helper executable into a fixed
${prefix}/libexec/ location, instead of using ${libexecdir} for
this. At the same time, --libexecdir is being happily ignored
by ./configure. Even more, the same patch sets unused $libexecdir
variable in the generated config-host.mak, and uses fixed string
(\${prefix}/libexecdir) for the bridge helper binary.
Fix this braindamage by introducing $libexecdir variable, using
it for the bridge helper binary, and recognizing --libexecdir.
This patch is applicable to stable-1.1.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Corey Bryant <coreyb@linux.vnet.ibm.com>
Cc: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
Add an explicit CPUState parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix conflicts]
Signed-off-by: Alexander Graf <agraf@suse.de>
valgrind with kvm produces a big amount of false positives regarding
"Conditional jump or move depends on uninitialised value(s)". This
happens because the guest memory is allocated with qemu_vmalloc which
boils down posix_memalign etc. This function is (correctly) considered
by valgrind as returning undefined memory.
Since valgrind is based on jitting code, it will not be able to see
changes made by the guest to guest memory if this is done by KVM_RUN,
thus keeping most of the guest memory undefined.
Now lots of places in qemu will then use guest memory to change behaviour.
To avoid the flood of these messages, lets declare the whole guest
memory as defined. This will reduce the noise and allows us to see real
problems.
In the future we might want to make this conditional, since there
is actually something that we can use those false positives for:
These messages will point to code that depends on guest memory, so
we can use these backtraces to actually make an audit that is focussed
only at those code places. For normal development we dont want to
see those messages, though.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.
[ kraxel: 3 continues to be the default revision. Once we have a new
stable spice-server release and the qemu patches to enable
the new bits merged we'll go flip the switch and make rev4
the default ]
This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.
On migration reissue spice_qxl_monitors_config_async.
RHBZ: 770842
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output
$ qmp-shell -p /tmp/qemu
(QEMU) query-target
{ u'return': { u'arch': u'x86_64' }}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adding basic options to the configure script to use libseccomp or not.
The default is set to 'no'. If the flag --enable-libseccomp is used, the
script will check for its existence using pkg-config.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2:
- As I removed all the code related to seccomp from vl.c, I created
qemu-seccomp.[ch].
- Also making the configure script to add the specific line to
Makefile.obj in order to compile with appropriate support to seccomp.
v2 -> v3:
- Removing the line from Makefile.obj and adding it to Makefile.objs.
- Marking libseccomp default option to 'yes' in the configure script.
v3 -> v8:
- fix configure probe if libseccomp isn't available (aliguori)
MacOSX 10.8 ("Mountain Lion") requires us to compile our one
Objective-C source file with clang even if the rest of QEMU
requires a real gcc, because the system headers we use make
use of Apple's "Blocks" extension to C/ObjC, and mainline
gcc doesn't support that. Since we only need to use a true
gcc for the parts of QEMU that use the fixed-register
env variable, we can simply use clang to build the ObjC
file: it will link to the gcc-built objects with no problems.
Add the necessary support for an OBJCC variable in the
makefile and configure machinery; we default to clang
if we have it, otherwise whatever CC is (since gcc
might be the Apple gcc which does support Blocks).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
MacOSX 10.8 ("Mountain Lion") defaults to trying to use automated
reference counting on certain objects. This means that the system
header files will use some Objective C syntax constructs even when
compiling pure C, which confuses mainline gcc. Suppress this by
setting OS_OBJECT_USE_OBJC=0. This avoids a compile error like this:
In file included from
/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:5:0,
from /usr/include/os/object.h:74,
from /usr/include/dispatch/dispatch.h:48,
from /System/Library/Frameworks/IOKit.framework/Headers/IOKitLib.h:56,
from block/raw-posix.c:35:
/System/Library/Frameworks/Foundation.framework/Headers/NSObjCRuntime.h:409:1: error: stray ‘@’ in program
[with a large number of further run-on errors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Both MacOS and Solaris have special case handling for the CPU
type, because the check_define probes will return i386 even if
the hardware is 64 bit and x86_64 would be preferable. Move
these checks earlier in the configure probing so that we can
do them only if the user didn't specify a CPU with --cpu. This
fixes a bug where the user's command line argument was being
ignored.
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[ The following text is in the "ISO-8859-1" character set. ]
[ Your display is set for the "KOI8-R" character set. ]
[ Some special characters may be displayed incorrectly. ]
Since we moved pcspk into hwlib, CONFIG_PCSPK is no longer defined per
target. Therefore, statically built soundhw array in arch_init.c stopped
including this card.
Work around this by re-adding this define to config-target.mak.
Long-term, a dynamic creation of this soundhw list will be necessary.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: malc <av1474@comtv.ru>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
In the old QMP days, this code was used to find out QMP commands that
might be calling monitor_printf() down its call chain.
This is almost impossible to happen today, because the qapi converted
commands don't even have a monitor object. Besides, it's been more than
a year since I used this last time.
Let's just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
* qemu-kvm/uq/master:
kvm: Add documentation comment for kvm_irqchip_in_kernel()
kvm: Decouple 'GSI routing' from 'kernel irqchip'
kvm: Decouple 'MSI routing via irqfds' from 'kernel irqchip'
kvm: Decouple 'irqfds usable' from 'kernel irqchip'
kvm: Move kvm_allows_irq0_override() to target-i386, fix return type
kvm: Rename kvm_irqchip_set_irq() to kvm_set_irq()
kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'
configure: Don't implicitly hardcode list of KVM architectures
kvm: Check if smp_cpus exceeds max cpus supported by kvm
Configuring with Clang compiler with -Werror would not work after
improved checks:
/tmp/qemu-conf--25992-.c:4:32: error: self-comparison always evaluates
to true [-Werror,-Wtautological-compare]
int main(void) { return preadv == preadv; }
/tmp/qemu-conf--25992-.c:13:26: error: self-comparison always
evaluates to true [-Werror,-Wtautological-compare]
return epoll_create1 == epoll_create1;
/tmp/qemu-conf--25992-.c:3:13: error: explicitly assigning a variable
of type 'char **' to itself [-Werror,-Wself-assign]
environ = environ;
Avoid the errors by adjusting the tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for checking whether test case code can compile without
warnings, by recompiling each successful test with -Werror. If the
-Werror version doesn't pass, we bail out. This gives us the same
level of visibility of warnings in test code as --enable-werror
provides for the main compile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The code creating the symlink from linux-headers/asm to the
architecture specific linux-headers/asm-$arch directory was
implicitly hardcoding a list of KVM supporting architectures.
Add a default case for the common "Linux architecture name and
QEMU CPU name match" case, so future architectures will only
need to add code if they've managed to get mismatched names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The Xen 4.1 probe never uses the return value from xc_interface_open(),
so was provoking a compiler warning on newer gcc. Fix by not bothering
to put the return value anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The Xen compile checks are currently run inside subshells. This
is unnecessary and has the effect that if do_cc() exits with
an error message then this only causes the subshell to exit,
not the whole of configure, which is confusing. Remove the
subshells, changing:
if ( cat ; compile_prog ) ; then ...
to
if cat && compile_prog ; then ...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The xs.h header is now deprecated and produces a warning. This prevents the
configure script from enabling Xen with xen-unstable whom will become 4.2. As
this header is not anymore common to every version of Xen, we just remove it
from the early probe for Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
If the smartcard configure check passes, add '-I\$(SRC_PATH)/libcacard'
to QEMU_INCLUDES, not QEMU_CFLAGS. Otherwise the unexpanded SRC_PATH
will cause a warning in every following configure test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning in the utimensat/futimens test ("implicit
declaration of function 'utimensat'", ditto futimens) by
adding a missing include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning (variable 'png_ptr' set but not used) in the
PNG detection test code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The old test code raises two compiler warnings which are errors since
commit 417c9d72d4.
These errors could result in compilations with compiler flag
-march486 (so all nice features of newer processors got lost).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The distinction between QEMU_CFLAGS and CFLAGS is that the
former is for flags without which QEMU can't compile, whereas
the latter is for flags like "-g -O2" which the user can
safely override. "-march=i486" is in the former category, and
so belongs in QEMU_CFLAGS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"+=" does not work with dash and other simple /bin/sh implementations.
The new code prepends the flag while the old code either did not work
(it continued after an error message which typically was not read) or
appended the flag. That difference should not matter here.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4 all configure tests
normally run with -Werror. Some of these tests now fail because they
raised a compiler warning.
This patch fixes support for capabilities.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4,
all configure tests normally run with -Werror.
Some of these tests now fail because they raised a compiler warning.
Here a build breakage for ALSA (configure --audio-drv-list=alsa) is fixed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't run configure tests with -Werror in the compiler flags. The idea
of -Werror is that it makes problems very obvious to developers, so
they get fixed quickly. However, when running configure tests, failures
due to -Werror are far from obvious -- they simply result in the test
quietly failing when it should have passed. Not using -Werror is in
line with recommended practice in the Autoconf world.
This commit is essentially backing out the changes in commit 417c9d72.
Instead we fix the problem that commit was trying to address in a
different way: we add -Werror only for the test of the nss headers,
with a comment that this is specifically intended to detect a bug
in some releases of nss.
We also have to clean up a bug in the smartcard test where it was
trying to include smartcard_cflags in the test compile flags: this
would always result in a failure with -Werror, because they include
an escaped "$(SRC_PATH)" which is only valid when used in the final
makefile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split the configure test that checks for valgrind into two, one
part checking whether we have the gcc pragma to disable unused-but-set
variables, and the other part checking for the existence of valgrind.h.
The first of these has to be compiled with -Werror and the second
does not and shouldn't generate any warnings.
This (a) allows us to enable "make errors in configure tests be
build failures" and (b) enables use of valgrind on systems with
a gcc which doesn't know about -Wunused-but-set-varibale, like
Debian squeeze.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 504972922d which broke the
build for ARM.
I don't think this change is necessary. If I'm wrong, please recommit this
changeset with an appropriate fix for ARM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[ The following text is in the "ISO-8859-1" character set. ]
[ Your display is set for the "KOI8-R" character set. ]
[ Some special characters may be displayed incorrectly. ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: malc <av1474@comtv.ru>
valgrind tends to get confused and report false positives when you
switch stacks and don't tell it about it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
We want all configure tests pass with -Werror if it is enabled. So we
need to update QEMU_CFLAGS early on to make sure we also pass it in to
all the compile test jobs.
This fixes a warning-became-error bug in nss for me with the default
configuration:
In file included from /usr/include/nss3/pkcs11t.h:1780,
from /usr/include/nss3/keythi.h:41,
from /usr/include/nss3/keyt.h:41,
from /usr/include/nss3/pk11pub.h:43,
from libcacard/vcard_emul_nss.c:21:
/usr/include/nss3/pkcs11n.h:365:26: error: "__GNUC_MINOR" is not defined
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make target_phys_addr_t 64 bits for ARM targets, and set
TARGET_PHYS_ADDR_SPACE_BITS to 40. This should have no effect for ARM
boards where physical addresses really are 32 bits (except perhaps a
slight performance hit on 32 bit hosts for system emulation) but allows
us to implement the Large Physical Address Extensions for Cortex-A15,
which mean 40 bit physical addresses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 2624bab836 removed these
configure arguments. Now the help text for both is removed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
QEMU now has a fundamental requirement for pthreads, so there
is no compelling reason to retain support for the non-threaded
VNC server. Remove the --{enable,disable}-vnc-thread configure
arguments, and all CONFIG_VNC_THREAD conditionals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit ec5b06d (configure: ensure directory exists when creating symlinks)
moved the creation of directories into the symlink() function but forgot
the case where no symlink is created.
This leads to build errors on arm Linux due to -I../linux-headers.
Unbreak the build on arm Linux by reverting part of that commit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
tci: Support INDEX_op_bswap64_i64
target-i386: Use QEMU instead of Qemu
Makefile.hw: avoid overly large 'make clean' rm command
configure: Fix typo
arm_gic: Send dbg msgs to stderr not stdout
checkpatch: Add QEMU specific rule
qemu-config: Use QEMU instead of Qemu
libqtest: Fix socket_accept() to pass address_len
Makefile.user: Define CONFIG_USER_ONLY for libuser/
Makefile: Remove macro qapi-dir
Makefile: Remove BUILD_DIR from qapi-dir
Install 'bepo' keymap already included in Qemu source
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The typo did not cause an error because open_by_handle_at
was only compared to "yes".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In the next release of Xen (4.2), xs.h became deprecated.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Fedora 17's toolchain wants optimization enabled for _FORTIFY_SOURCE;
so disable _FORTIFY_SOURCE when debugging.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some versions declare open_by_handle_at, but don't define AT_EMPTY_PATH.
Extend the check in configure to test both preconditions.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, the libhw* directories will have a hierarchy
that mimics the source tree. This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch starts converting the hw/ directory. Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.
After this patch, the files that are compiled once will show the
same hierarchy in the build tree as they do in the source tree,
for example hw/qdev.o instead of just qdev.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some systems may declare environ automatically, others don't. Check for it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This new 'Qemu' was recently added.
Replace it by the official all upper case 'QEMU'.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
When auto-detecting VirtFS support, virtfs="". Set it to "no" after
checking whether it was explicitly requested through --enable-virtfs.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid tab-indention and fit in with the surrounding code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
scsi: Add assertion for use-after-free errors
scsi: remove useless debug messages
scsi: set VALID bit to 0 in fixed format sense data
scsi: do not require a minimum allocation length for REQUEST SENSE
scsi: do not require a minimum allocation length for INQUIRY
scsi: parse 16-byte tape CDBs
scsi: do not report bogus overruns for commands in the 0x00-0x1F range
scsi-disk: add dpofua property
scsi: change "removable" field to host many features
scsi: Specify the xfer direction for UNMAP and ATA_PASSTHROUGH commands
scsi: fix WRITE SAME transfer length and direction
scsi: fix refcounting for reads
scsi: prevent data transfer overflow
ISCSI: Add support for thin-provisioning via discard/UNMAP and bigger LUNs
Update the configure test for libiscsi support to detect version 1.3
or later. Version 1.3 of libiscsi provides both READCAPACITY16 as well
as UNMAP commands.
Update the iscsi block layer to use READCAPACITY16 to detect the size of
the LUN instead of READCAPACITY10. This allows support for LUNs larger
than 2TB.
Update to implement bdrv_aio_discard() using the UNMAP command.
This allows us to use thin-provisioned LUNs from TGTD and other iSCSI
targets that support thin-provisioning.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[squashed in subsequent patch from Ronnie to fix off-by-one in LBA count]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Requiring spice-server >= 0.8.2 is not enough since spice-server.pc
doesn't require spice-protocol (any version). Until that is fixed
upstream an explicit requirement in qemu fixes compilation broken since
commit 2e1a98c9c1
Author: Alon Levy <alevy@redhat.com>
Date: Fri Feb 24 23:19:30 2012 +0200
qxl: introduce QXLCookie
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* stefanha/trivial-patches:
iohandler: Use bool for boolean struct member and remove holes
async: Use bool for boolean struct members and remove a hole
configure: Fix creation of symbolic links for MinGW toolchain
The tracetool code requires Python 2.4, which was released in 2004.
Check for a supported Python version so we can give a clear error
message.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Move socket-related Solaris libraries to $solarisnetlibs and use them
for both $LIBS and $libs_qga.
Fixes build on illumos without --disable-guest-agent.
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The MinGW toolchain on w32/w64 hosts does not create symbolic links,
but implements 'ln -s' similar to 'cp -r'.
In incremental out of tree builds, this resulted in files which
were not updated when their counterparts in the QEMU source tree
changed. Especially for Makefile* this happened very often.
With this patch, the 'symlinked' files are now always updated for
out of tree builds. Similar code was already used for the symbolic
link of libcacard/Makefile.
The symlink macro always removes the target before it is created
again, therefore the rm command for libcacard/Makefile was redundant
and is removed now.
Macro symlink is also used with directories. To remove them on w32
hosts, a recursive rm is needed.
v2:
Quote arguments in shell function symlink, and also quote any argument
which is passed to symlink and which contains macros. This should reduce
the chance of accidents caused by rm -rf.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
When SDL support is disabled, there is no way to build QEMU without
Cocoa support on MacOS X. This patch adds '--disable-cocoa' switch and
allows to build QEMU without both SDL and Cocoa frontends.
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
[AF: Adapt help output]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Fixes the build when combined with the drop of darwin-user.
Enthusiasts can still try building it using --enable-bsd-user.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Bernhard Walle <bernhard@bwalle.de>
Tested-by: Bernhard Walle <bernhard@bwalle.de> [Mac OS 10.7.3]
Acked-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
remove the extra pthread switch which might be there
from the package config check for gthreads.
Signed-off-by: Peter Portante <peter.portante@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow the user to make Qemu use a different subdirectory name
inside $datadir and $sysconfdir, instead of "/qemu".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf uses --datadir for the /usr/share directory, not the
program-specific subdirectory inside /usr/share. This changes configure
to match autoconf behavior.
Note that this will break compatibility with existing build scripts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no code using that variable according to 'git grep', so kill
it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
$confdir is a confusing name, as it's not clear if it's "the system
config dir" or "the Qemus-specific directory inside the config dir".
$qemu_confdir makes it more clear.
The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for
both "confdir" and "qemu_confdir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.
The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There's no "confdir" variable on Autoconf, but it's good to make it
clear that it's a variable for the Qemu-specific subdirectory inside
$sysconfdir.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The autoconf "docdir" variable is used for the program-specific
subdirectory, but anyway it's better to make it clear that the variable
is used for the qemu-specific subdirectory path.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The variable is used for the qemu-specific directory and has a different
meaning of the autoconf "datadir" variable (that's used for the
$prefix/share directory, not for $prefix/share/PACKAGE).
This doesn't change behavior or interfaces, it's just an internal
variable rename.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.
This patch replaces the shell version of tracetool with a Python
version. The new tracetool design is:
scripts/tracetool.py - top-level script
scripts/tracetool/backend/ - tracer backends live here (simple, ust)
scripts/tracetool/format/ - output formats live here (.c, .h)
There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.
Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.
[Commit description written by Stefan Hajnoczi]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Xen 4.2 is the first to support xc_hvm_inject_msi: use it to determine
if we are running on it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Our Python scripts require Python 2 and will fail on Python 3, eg:
File "/home/petmay01/linaro/qemu-from-laptop/qemu/scripts/qapi-commands.py", line 378
except getopt.GetoptError, err:
^
SyntaxError: invalid syntax
Add a check to configure that Python is not a Python 3, so we can
fail with a comprehensible error rather than an obscure one.
Reported-by: Boris Matti <swiftos@lavabit.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
#abort is not a preprocessor statement. It aborts, but the preprocessor
statement #error is more common to abort a compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove some useless uses of ARCH_CFLAGS -- this variable was never set
so will always be empty. The uses were accidental: in commit 0c439cbf8
Juan Quintela removed ARCH_CFLAGS in favour of CFLAGS (which in turn
became QEMU_CFLAGS). However in commit be17dc90 a use of it was
reintroduced (apparently accidentally) by Michael S. Tsirkin, and then
I subsequently cut-n-pasted that into a number of other configure
feature tests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* stefanha/trivial-patches:
make: fix clean rule by removing build file in qom/
configure: Link qga against UST tracing related libraries
configure: Link QEMU against 'liburcu-bp'
main-loop: make qemu_event_handle static
block/curl: Replace usleep by g_usleep
qtest: Add missing GCC_FMT_ATTR
w32: Undefine error constants before their redefinition
configure: fix mingw32 libs_qga typo
Peter Maydell
Richard Henderson
Bruce Rogers
Michael Tokarev
Jan Kiszka
Aurelien Jarno
Stefan Weil
Anthony Liguori
Luiz Capitulino
Gerd Hoffmann
Avi Kivity
Bharata B Rao
Hans de Goede
Blue Swirl
Natanael Copa
Yann E. MORIN
Alon Levy
Daniel P. Berrange
Christian Borntraeger
Eduardo Otubo
Guan Xuetao
Anthony PERARD
Jia Liu
Kevin Wolf
Alexander Graf
Andreas Färber
Max Filippov
Harsh Prateek Bora
Paolo Bonzini
Wen Congyang
Ronnie Sahlberg
Stefan Hajnoczi
Andreas Färber
Pavel Borzenkov
Peter Portante
Kusanagi Kouichi
Eduardo Habkost
Lluís Vilanova
Stefano Stabellini
Marc-André Lureau