Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Call the new PCIDeviceClass method realize(). Default it to
pci_default_realize(), which calls old method init().
To convert a device model, make it implement realize() rather than
init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Implement DeviceClass methods realize() and unrealize() instead of
init() and exit(). The core's initialization errors now get
propagated properly, and QMP sends them instead of an unspecific
"Device initialization failed" error. Unrealize can't fail, so no
change there.
PCIDeviceClass is unchanged: it still provides init() and exit().
Therefore, device models' errors are still not propagated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use build_append_namestring() instead of build_append_nameseg()
So user won't have to care whether name is NameSeg, NamePath or
NameString.
See for reference ACPI 5.0: 20.2.2 Name Objects Encoding
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the will be later used for composing AML primitives
and all that could be reused later for ARM machines
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When bridge hotplug is disabled for old machine types,
we never free memory allocated for temporary tables.
Fix this up.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1. guest reIPL changes (Fan Zhang)
Implements subcode 5 and 6 of diag 0x308. This allows to use
/sys/firmware/[re]ipl/ccw/* and the chreipl and lsreipl tools in
Linux. In addition to the normal "change the disk" this also
allows to switch from booting an external kernel into rebooting
from a disk.
2. Memory page table walking (Thomas Huth)
Fix several page table walking functions, used in several places
like gdb server and instruction handling. Also use these functions
in several I/O related functions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=lR0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150218' into staging
Features for s390x/kvm
1. guest reIPL changes (Fan Zhang)
Implements subcode 5 and 6 of diag 0x308. This allows to use
/sys/firmware/[re]ipl/ccw/* and the chreipl and lsreipl tools in
Linux. In addition to the normal "change the disk" this also
allows to switch from booting an external kernel into rebooting
from a disk.
2. Memory page table walking (Thomas Huth)
Fix several page table walking functions, used in several places
like gdb server and instruction handling. Also use these functions
in several I/O related functions.
# gpg: Signature made Wed Feb 18 09:13:22 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150218: (29 commits)
s390x/helper: Remove s390_cpu_physical_memory_map
s390x/pci: Rework memory access in zpci instruction
s390x/ioinst: Rework memory access in TPI instruction
s390x/ioinst: Rework memory access in CHSC instruction
s390x/ioinst: Rework memory access in STCRW instruction
s390x/ioinst: Rework memory access in TSCH instruction
s390x/ioinst: Set condition code in ioinst_handle_tsch() handler
s390x/ioinst: Rework memory access in STSCH instruction
s390x/ioinst: Rework memory access in SSCH instruction
s390x/ioinst: Rework memory access in MSCH instruction
s390x/css: Make schib parameter of css_do_msch const
s390x/mmu: Add function for accessing guest memory
s390x/kvm: Add function for injecting pgm access exceptions
s390x/mmu: Clean up mmu_translate_asc()
s390x/mmu: Check bit 52 in page table entry
s390x/mmu: Renaming related to the ASCE confusion
s390x/mmu: Add support for read-only regions
s390x/mmu: Fix the exception codes for illegal table entries
s390x/mmu: Fix exception types when checking the ASCEs
s390x/mmu: Fix translation exception code in lowcore
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJU5GFFAAoJEEy22O7T6HE40lIP/0YUSJxuEWn8cWrMMiUd5Hpb
9Yd/RVRbnFPX8yngZGC8TScxjxv22m8ziXN5nsICGUgpLVq6ZIq7vAzSbFo4Jh6O
px9v4C/sy4u1EJ/c2cm3imz0PTRZd2yk/E7vkszm8qr0DTlO/5ULCBR1Jkq5aqj/
yLmauhv72h9NGb+k1P9Mjc1mr66RWCH2tCeR5uhQ/s3hUadKwh0WEtdfiqIyoCsd
jM/58TI5+EMoqXH7YHy8dJIwgJIDweafdWAySbVpNK9cKbhuB61sMbAzRB3bzjwY
Wmco2qyj12u40jniKc7poWL385ddjfaATXmALAwkPUdQkVIIWhZH4FBtX/3YJGGb
fX++4PaIJxxK/sz4H8VXsxVq+QaNp/1wgAIND+CuIV65FV1ioMe1/iGGI4L4LCEF
PVpk8t7k5zrZSFn/OMchR1UQZlTWX7oRFg9M5HG6k0hr8PtKYPfrrc9OJ5th0F8j
xb02/K5nWsYOIgpyliov7T7/gpt1kcCNkKw/KmPO6KNxKzO7jOLeEPxITGY+ASsh
gWajDzfVCbajvZYu+rePn3wuk4iBrJzhx5yHB9gkvkuKzK8aOJPX5LDshAZGfaI0
bN3yn/dRIasF9iVTgIv3CPLFp3UyOVFvGnkNCgjH69A0mPD/m/drmoAtlYTWjWUv
q+VKZ3MqQArKwJXY4tJH
=ASvH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150218-1' into staging
usb: error handling fixes from Markus, make sysbus ehci arm-only.
# gpg: Signature made Wed Feb 18 09:54:13 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20150218-1:
Make sysbus EHCI devices ARM only by default
PPC: Don't use legacy -usbdevice support for setting up board
r2d: Don't use legacy -usbdevice support for setting up board
usb: Change usb_create_simple() to abort on failure
usb: Suppress bogus error when automatic usb-hub creation fails
usb: Do not prefix error_setg() messages with "Error: "
usb: Improve -usbdevice error reporting a bit
usb: usb_create() can't fail, drop useless error handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU48JYAAoJEDNTyc7xCLWEK+AH/R6b+ycKU3LKG3ZKcGE/vV45
szTtE6SKRQmANs1GwQy2qMubBtEFnmfsJSiWQNmPArmP20rZK0Yyy4PaLm7UrTYs
mpfNee6mlc8PnaMjdzlgBJInwJIx3hgV0UNl4e1h+DM6Xe6GqC6NGc8vdfuIW6is
zHCtH5mAId7ykC03KCVAtTTWFJlJyujrytsNd2jP3zkZlwcCOS08JG1U0SMaBjTq
WCZAxbDPuODUqrwimevST1IFstg50cnsW9wq2oLLCp/ZnsYtCdeSZQGIVDkjL8zR
stJRDKukY4ByU0zLjcDrBpdzTwOb6ndZp929ti6y+3dQUX3oTOhqgE8JT/kR+Qo=
=KpkU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag' into staging
tag for qga-pull-2015-02-16-v2
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
# gpg: Signature made Tue Feb 17 22:36:08 2015 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag:
qemu-ga-win: Fail loudly on bare 'set-time'
qga: add memory block command that unsupported
qga: implement qmp_guest_get_memory_block_info() for Linux with sysfs
qga: implement qmp_guest_set_memory_blocks() for Linux with sysfs
qga: implement qmp_guest_get_memory_blocks() for Linux with sysfs
qga: introduce three guest memory block commmands with stubs
qga: implement file commands for Windows guest
guest agent: guest-file-open: refactoring
utils: drop strtok_r from envlist_parse
qga: add guest-set-user-password command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v2:
* Fix C11 typedef redefinitions in ahci and libqos malloc [Peter]
* Fix lx -> PRIx64 format specifiers in ahci [Peter]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU4hCxAAoJEJykq7OBq3PIh2EH/02LojwlJwtsUoFuDDOdqVu+
iQsGbGpmtjeaBkiiiQnlN0UHFJk+I05JohagzivchB6p1v0BDnGPMGCRiY2a/URU
ZrBt6kvIL6ro6n6ebrMq4+MFbyfgXC6tC8UuBnHBOlJMArHCue8w3BD+FWyYOJGY
+zzvWKSNxEkjwPyXuBPJI0eqLCmANnr31LVrh+4gTvXRnpArT+fNTBooCgA6zsRe
ChHObhstM/ljy7XZz5TmTXFf/68+WM8AYF+xIHiU3olCcBgH8VPn7lsdBSEuOtxH
HNe9tt2M91R+3Zdr2KXu+D4BRARKMlft9GDwLGAvGrYcBr7NNJo3KbKbxoecw4M=
=2rE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Fix C11 typedef redefinitions in ahci and libqos malloc [Peter]
* Fix lx -> PRIx64 format specifiers in ahci [Peter]
# gpg: Signature made Mon Feb 16 15:45:53 2015 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (65 commits)
block: Keep bdrv_check*_request()'s return value
block: Remove "growable" from BDS
block: Clamp BlockBackend requests
qemu-io: Use BlockBackend
qemu-io: Remove "growable" option
qemu-io: Use blk_new_open() in openfile()
qemu-nbd: Use blk_new_open() in main()
qemu-img: Use BlockBackend as far as possible
qemu-img: Use blk_new_open() in img_rebase()
qemu-img: Use blk_new_open() in img_open()
block/xen: Use blk_new_open() in blk_connect()
blockdev: Use blk_new_open() in blockdev_init()
iotests: Add test for driver=qcow2, format=qcow2
block: Add Error parameter to bdrv_find_protocol()
block: Add blk_new_open()
block: Lift some BDS functions to the BlockBackend
iotests: Add test for qemu-img convert to NBD
qemu-img: Fix qemu-img convert -n
qemu-iotests: Add 093 for IO throttling
qemu-iotests: Allow caller to disable underscore convertion for qmp
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Changes:
* bug fixes, cleanups and minor improvements
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJU339xAAoJEFIRjjwLKdpr3P8H/38mzAuCwu+T/kz6oqEq/Vcb
Bdr+BZh8p9SUjBVbjiOvhVlaL0tvm5FaVyZ/QGe6aEFuxsNjCFgQUZfj52sxRM1y
+qBCrpbgyRrpGMGvIJ10ApciqWcxrGAlSpQiJv8U7fFOKBmwo6qXR4uXdWKEZWmG
ltDpESqQT6FQpwE2QhncNNcShrMoPts5S8anaPDaC2AtqGe2qQwHNH4pzVkbWUXY
VRFuS7BPhkMeks9HbkMIrFDwYw1i9Uq6s7B5ETzhig2lhYJ5yh3E6rm2szDEyqnn
hWT79+YmA7FVNIbuzP8QF49aM4QmjdULXogK8cjdq0497O/4fgP4uJv7pttoikU=
=UahQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150213-2' into staging
MIPS patches 2015-02-13
Changes:
* bug fixes, cleanups and minor improvements
# gpg: Signature made Sat Feb 14 17:01:37 2015 GMT using RSA key ID 0B29DA6B
# gpg: Can't check signature: public key not found
* remotes/lalrae/tags/mips-20150213-2:
linux-user: correct stat structure in MIPS N32
target-mips: pass 0 instead of -1 as rs in microMIPS LUI instruction
target-mips: fix broken snapshotting
target-mips: use CP0EnLo_XI instead of magic number
target-mips: ll and lld cause AdEL exception for unaligned address
target-mips: fix detection of the end of the page during translation
target-mips: Make CP0.Status.CU1 read-only for the 5Kc and 5KEc processors
isa: remove isa_mem_base variable
gt64xxx: remove isa_mem_base usage
piix4: use PCI address space instead of system memory
mips: remove isa_mem_base usage
jazz: remove usage of isa_mem_base
jazz: do not explode QEMUMachineInitArgs structure
isa: add memory space parameter to isa_bus_new
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A number of ARM embedded boards include EHCI USB host controllers which
appear as directly mapped devices, rather than sitting on a PCI bus.
At present code to emulate such devices is included whenever EHCI support
is included. This patch adjusts teh config options to only include them
in builds targetting ARM by default.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's tempting, because usbdevice_create() is so simple to use. But
there's a lot of unwanted complexity behind the simple interface.
Switch to usb_create_simple().
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's tempting, because usbdevice_create() is so simple to use. But
there's a lot of unwanted complexity behind the simple interface.
Switch to usb_create_simple().
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of returning null pointer. Matches pci_create_simple(),
isa_create_simple(), sysbus_create_simple(). It's unused since the
previous commit, but I'll put it to use again shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USBDevice's realize method usb_qdev_realize() automatically creates a
usb-hub when only one port is left. Creating devices in realize
methods is questionable, but works.
If usb-hub creation fails, an error is reported to stderr, but the
failure is otherwise ignored. We then create the actual device using
the last port, which may well succeed.
Example:
$ qemu -nodefaults -S -display none -machine usb=on -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) device_add usb-mouse
[Repeat 36 times]
(qemu) info usb
Device 0.0, Port 1, Speed 12 Mb/s, Product QEMU USB Mouse
Device 0.0, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
Device 0.0, Port 2.1, Speed 12 Mb/s, Product QEMU USB Mouse
[More mice and hubs omitted...]
Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
(qemu) device_add usb-mouse
usb hub chain too deep
Failed to initialize USB device 'usb-hub'
(qemu) info usb
[...]
Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
Device 0.0, Port 2.8.8.8.8.8, Speed 12 Mb/s, Product QEMU USB Mouse
Despite the "Failed" message, the command actually succeeded.
In QMP, it's worse. When adding the 37th mouse via QMP, the command
fails with
{"error": {"class": "GenericError", "desc": "usb hub chain too deep"}}
Additionally, "Failed to initialize USB device 'usb-hub'" is reported
on stderr. Despite the command failure, the device was created. This
is wrong.
Fix by avoiding qdev_init() for usb-hub creation, so we can ignore
errors cleanly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Because it produces beauties like
(qemu) usb_add mouse
Failed to initialize USB device 'usb-mouse': Error: tried to attach usb device QEMU USB Mouse to a bus with no free ports
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most LegacyUSBFactory usbdevice_init() methods realize with
qdev_init_nofail(), even though their caller usbdevice_create() can
handle failure. Okay if it really can't fail (I didn't check), but
somewhat brittle.
usb_msd_init() and usb_bt_init() call qdev_init(). The latter
additionally reports an error when qdev_init() fails.
Realization failure produces multiple error reports: a specific one
from qdev_init(), and generic ones from usb_bt_init(),
usb_create_simple(), usbdevice_create() and usb_parse().
Remove realization from the usbdevice_init() methods. Realize in
usbdevice_create(), and produce exactly one error message there. You
still get another one from usb_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in legacy chardev parser
qemu_chr_parse_compat(). Legacy chardev syntax is not to be used in
QMP.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in initial startup helpers
machine_set_property() and object_create().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in initial startup helper
configure_tpm().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in initial startup helper
numa_init_func() and board setup helper
memory_region_allocate_system_memory().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in HMP command handler
hmp_host_net_add() and initial startup helpers net_init_client(),
net_init_netdev(). Keep it in QMP command handler qmp_netdev_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in HMP command handler
hmp_trace_event().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them. qerror_report_err() is inappropriate in
many contexts. monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use. Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.
Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report(). Turns out that's everywhere.
While there, rename monitor_handle_fd_param2() to monitor_fd_param().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I've typed error_report("%s", error_get_pretty(ERR)) too many times
already, and I've fixed too many instances of qerror_report_err(ERR)
to error_report("%s", error_get_pretty(ERR)) as well. Capture the
pattern in a convenience function.
Since it's almost invariably followed by error_free(), stuff that into
the convenience function as well.
The next patch will put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We get two error messages: one from monitor_handle_fd_param2(), and
another one from vhost_scsi_realize(). The second one gets suppressed
in QMP context.
That's because monitor_handle_fd_param() calls qerror_report_err().
Calling qerror_report_err() is always inappropriate in realize
methods, because it doesn't return the Error object. It either
reports the error to stderr or the human monitor, or it stores it in
the QMP monitor, where it makes the QMP command fail even when the
realize method ignores the error and succeeds. Fortunately,
vhost_scsi_realize() doesn't do that.
Fix by switching to monitor_handle_fd_param2().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The function is now not used anymore, so it can be removed safely.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change zpci instructions to use the new logical memory access
functions.
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for TPI to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the CHSC handler to correctly use logical addresses, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for STCRW to use the new logical memory access
functions. Since STCRW is suppressed on protection/access exceptions,
we also have to make sure to re-queue the CRW in case it could not be
written to the memory.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the TSCH handler to use the new logical memory access functions.
Since the channel should not be updated in case of a protection or access
exception while writing to the guest memory, the css_do_tsch() has to be
split up into two parts, one for retrieving the IRB and one for the update.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move the setting of the condition code from kvm.c into the handler
function in ioinst.c itself, just like it has been done with the other
handlers already (TSCH has just not been changed yet since it is called
from a different dispatcher in kvm.c).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for STSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for SSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for MSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The schib parameter of css_do_msch() can be declared as const to
make it clear that it does not get modified by this function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
