Now that the previous commit ("hw/mips/gt64xxx_pci: Don't
endian-swap GT_PCI0_CFGADDR") fixed the issue accessing
the GT64120 PCI config-address register on big-endian
targets, we can enable this TuxRun test.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230223220404.63630-1-philmd@linaro.org>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.
The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.
This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.
None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>
Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>
When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.
When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.
Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>
The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.
Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>
The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.
This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').
Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>
The openbsd image is 20GB in size, but the automatic partitioning
done by the installer leaves /home with a mere ~3.5 GB of space,
wasting free space across many other partitions that are not
used by our build process:
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 1229692 213592 954616 18% /
/dev/sd0k 7672220 40 7288572 0% /home
/dev/sd0d 1736604 24 1649752 0% /tmp
/dev/sd0f 4847676 2505124 2100172 54% /usr
/dev/sd0g 1326684 555656 704696 44% /usr/X11R6
/dev/sd0h 4845436 1445932 3157236 31% /usr/local
/dev/sd0j 10898972 4 10354020 0% /usr/obj
/dev/sd0i 3343644 4 3176460 0% /usr/src
/dev/sd0e 2601212 19840 2451312 1% /var
This change tells the installer todo custom partitioning with
4 GB on /, 256 MB swap, and the remaining ~15GB for /home
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 7932412 4740204 2795588 63% /
/dev/sd0d 32164636 40 30556368 0% /home
This will avoid ENOSPC failures when tests that need to create
big files (disk images) run in parallel.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As a VM used only for automated testing there is no need to
install the X11 stack.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are abusing the avocado tags which are intended to provide test
selection metadata to provide parameters to our test. This works OK up
until the point you need to have ,'s in the field as this is the tag
separator character which is the case for a number of the drive
parameters. Fix this by making drive a parameter to the common helper
function.
Fixes: 267fe57c23 (tests: add tuxrun baseline test to avocado)
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-11-alex.bennee@linaro.org>
So you can do:
cd tests/tcg/aarch64-linux-user
make -f ../Makefile.target help
To see the list of tests. You can then run each one individually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-8-alex.bennee@linaro.org>
It seems we also need to pass DOCKER_BUILDKIT as an argument to docker
itself to get the full benefit of caching.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>
The core of the test was utilising "ethtool -t eth1 offline" to run
through a test sequence. For reasons unknown the test hangs under some
configurations of the build on centos8-stream. Fundamentally running
the old fedora-31 cloud-init is just too much for something that is
directed at testing one device. So we:
- replace fedora with a custom kernel + buildroot rootfs
- rename the test from IGB to NetDevEthtool
- re-factor the common code, add (currently skipped) tests for other
devices which support ethtool
- remove the KVM limitation as its fast enough to run in KVM or TCG
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230322145529.4079753-1-alex.bennee@linaro.org>
A recent attempt to let avocado run more tests on the CentOS stream
build failed because there was no gating on the multiprocess feature.
Like missing accelerators avocado should gracefully skip when the
feature is not enabled.
In this case we use the existence of the proxy device as a proxy for
multi-process support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Message-Id: <20230321111752.2681128-1-alex.bennee@linaro.org>
To test Alpine boot on SBSA-Ref target we need Alpine Linux
'standard' image as 'virt' one lacks kernel modules.
So to minimalize Avocado cache I move test to 'standard' image.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302191146.1790560-1-marcin.juszkiewicz@linaro.org>
Message-Id: <20230315174331.2959-2-alex.bennee@linaro.org>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The blockjob/complete_in_standby test is flaky and fails
intermittently in CI:
172/621 qemu:unit / test-blockjob
ERROR 0.26s killed by signal 6 SIGABRT
11:03:46 MALLOC_PERTURB_=176
G_TEST_SRCDIR=/Users/pm215/src/qemu-for-merges/tests/unit
G_TEST_BUILDDIR=/Users/pm215/src/qemu-for-merges/build/all/tests/unit
/Users/pm215/src/qemu-for-merges/build/all/tests/unit/test-blockjob
--tap -k
----------------------------------- output -----------------------------------
stdout:
# random seed: R02S8c79d6e1c01ce0b25475b2210a253242
1..9
# Start of blockjob tests
ok 1 /blockjob/ids
stderr:
Assertion failed: (job->status == JOB_STATUS_STANDBY), function
test_complete_in_standby, file ../../tests/unit/test-blockjob.c, line
499.
Seen on macOS/x86_64, FreeBSD 13/x86_64, msys2-64bit, eg:
https://gitlab.com/qemu-project/qemu/-/jobs/3872508803https://gitlab.com/qemu-project/qemu/-/jobs/3950667240
Disable this subtest until somebody has time to investigate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317143534.1481947-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a number of small test that check whether accessing unaligned
addresses in various ways leads to a specification exception.
Run these test both in softmmu and user configurations; expect a PGM
in one case and SIGILL in the other.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230316164428.275147-13-iii@linux.ibm.com>
[thuth: Added -Wl,--build-id=none to LDFLAGS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test EXECUTE and EXECUTE RELATIVE LONG with relative long instructions
as targets.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-Id: <20230316210751.302423-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test for RXSBG with T=1 to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230316172205.281369-3-iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add several small tests that check the PSW modification instructions:
* lpsw.S checks whether LPSW works correctly in the "happy" case.
* lpswe-early.S checks whether early exceptions are recognized and
whether the correct ILC and old PSW are stored when they happen.
* ssm-early.S, stosm-early.S and exrl-ssm-early.S check the special
handling of SSM and STOSM with respect to early exceptions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230315020408.384766-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't disable all big-endian tests, instead check whether $(CORE) is
supported by the configured $(QEMU) and enable tests if it is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linker script for xtensa tests must be preprocessed for a specific
target, remove it as a part of make clean.
Fixes: be5cac175a ("tests/tcg/xtensa: enable system tests")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that qtest_qmp_add_client() works on win32, we can enable the VNC
test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230306122751.2355515-11-marcandre.lureau@redhat.com>
Use the "get-win32-socket" function to pass an opened socket to QEMU,
instead of using "getfd", which relies on socket ancillary FD message
passing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230306122751.2355515-10-marcandre.lureau@redhat.com>
docker.py is run during configure, and produces an error: No module
named 'pwd'.
Use a more portable and recommended alternative to lookup the user
"login name".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230306122751.2355515-4-marcandre.lureau@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
This can help debugging issues or develop, when error handling is
introduced.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-6-marcandre.lureau@redhat.com>
Because they are actually sockets...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221124802.4103554-3-marcandre.lureau@redhat.com>
Test COMPARE HALFWORD RELATIVE LONG instructions.
Test that the bytes following the second operand do not affect the
instruction.
Test the sign extension performed on the second operand.
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230310114157.3024170-3-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas found an autoconverge test failure where the
migration completed before the autoconverge had kicked in.
To try and avoid this again:
a) Reduce the usleep in test_migrate_auto_converge
so that it should exit quicker when autoconverge kicks in
b) Make the loop exit immediately rather than have the sleep
when it does start autoconverge, otherwise the autoconverge
might succeed during the sleep.
c) Reduce inc_pct so auto converge happens more slowly
d) Reduce the max-bandwidth in migrate_ensure_non_converge
to make the ensure more ensure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230306152612.52291-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
=e1yv
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Try writing zeroes to a FUSE export while allowing the area to be
unmapped; block/file-posix.c generally implements writing zeroes with
BDRV_REQ_MAY_UNMAP ('write -zu') by calling fallocate(PUNCH_HOLE). This
used to lead to a blk_pdiscard() in the FUSE export, which may or may
not lead to the area being zeroed. HEAD^ fixed this to use
blk_pwrite_zeroes() instead (again with BDRV_REQ_MAY_UNMAP), so verify
that running `qemu-io 'write -zu'` on a FUSE exports always results in
zeroes being written.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230227104725.33511-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
