Commit Graph

223 Commits

Author SHA1 Message Date
Peter Delevoryas
9f782e9e82 hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helper
Allows users to specify binary data to initialize an EEPROM, allowing users to
emulate data programmed at manufacturing time.

- Added init_rom and init_rom_size attributes to TYPE_AT24C_EE
- Added at24c_eeprom_init_rom helper function to initialize attributes
- If -drive property is provided, it overrides init_rom data

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule <ninadpalsule@us.ibm.com>
Link: https://lore.kernel.org/r/20230128060543.95582-4-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07 09:02:04 +01:00
Peter Delevoryas
9618ebae45 hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boards
This helper is useful in board initialization because lets users initialize and
realize an EEPROM on an I2C bus with a single function call.

Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07 09:02:04 +01:00
Jason A. Donenfeld
eac7a7791b x86: don't let decompressed kernel image clobber setup_data
The setup_data links are appended to the compressed kernel image. Since
the kernel image is typically loaded at 0x100000, setup_data lives at
`0x100000 + compressed_size`, which does not get relocated during the
kernel's boot process.

The kernel typically decompresses the image starting at address
0x1000000 (note: there's one more zero there than the compressed image
above). This usually is fine for most kernels.

However, if the compressed image is actually quite large, then
setup_data will live at a `0x100000 + compressed_size` that extends into
the decompressed zone at 0x1000000. In other words, if compressed_size
is larger than `0x1000000 - 0x100000`, then the decompression step will
clobber setup_data, resulting in crashes.

Visually, what happens now is that QEMU appends setup_data to the kernel
image:

          kernel image            setup_data
   |--------------------------||----------------|
0x100000                  0x100000+l1     0x100000+l1+l2

The problem is that this decompresses to 0x1000000 (one more zero). So
if l1 is > (0x1000000-0x100000), then this winds up looking like:

          kernel image            setup_data
   |--------------------------||----------------|
0x100000                  0x100000+l1     0x100000+l1+l2

                                 d e c o m p r e s s e d   k e r n e l
                     |-------------------------------------------------------------|
                0x1000000                                                     0x1000000+l3

The decompressed kernel seemingly overwriting the compressed kernel
image isn't a problem, because that gets relocated to a higher address
early on in the boot process, at the end of startup_64. setup_data,
however, stays in the same place, since those links are self referential
and nothing fixes them up.  So the decompressed kernel clobbers it.

Fix this by appending setup_data to the cmdline blob rather than the
kernel image blob, which remains at a lower address that won't get
clobbered.

This could have been done by overwriting the initrd blob instead, but
that poses big difficulties, such as no longer being able to use memory
mapped files for initrd, hurting performance, and, more importantly, the
initrd address calculation is hard coded in qboot, and it always grows
down rather than up, which means lots of brittle semantics would have to
be changed around, incurring more complexity. In contrast, using cmdline
is simple and doesn't interfere with anything.

The microvm machine has a gross hack where it fiddles with fw_cfg data
after the fact. So this hack is updated to account for this appending,
by reserving some bytes.

Fixup-by: Michael S. Tsirkin <mst@redhat.com>
Cc: x86@kernel.org
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20221230220725.618763-1-Jason@zx2c4.com>
Message-ID: <20230128061015-mutt-send-email-mst@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
2023-01-28 06:21:29 -05:00
Markus Armbruster
fe8ac1fa49 qapi machine: Elide redundant has_FOO in generated C
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with.  Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step.  This is the step for qapi/machine*.json.

Said commit explains the transformation in more detail.  The invariant
violations mentioned there do not occur here.

Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
2022-12-14 20:04:47 +01:00
BALATON Zoltan
443f07b73d hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.h
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-10-31 18:48:23 +00:00
Markus Armbruster
0a553c12c7 Drop useless casts from g_malloc() & friends to pointer
These memory allocation functions return void *, and casting to
another pointer type is useless clutter.  Drop these casts.

If you really want another pointer type, consider g_new().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-10-22 23:15:40 +02:00
Sunil V L
785a7383dd hw/arm, loongarch: Move load_image_to_fw_cfg() to common location
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-14 14:29:50 +10:00
Jason A. Donenfeld
e935b73508 x86: return modified setup_data only if read as memory, not as file
If setup_data is being read into a specific memory location, then
generally the setup_data address parameter is read first, so that the
caller knows where to read it into. In that case, we should return
setup_data containing the absolute addresses that are hard coded and
determined a priori. This is the case when kernels are loaded by BIOS,
for example. In contrast, when setup_data is read as a file, then we
shouldn't modify setup_data, since the absolute address will be wrong by
definition. This is the case when OVMF loads the image.

This allows setup_data to be used like normal, without crashing when EFI
tries to use it.

(As a small development note, strangely, fw_cfg_add_file_callback() was
exported but fw_cfg_add_bytes_callback() wasn't, so this makes that
consistent.)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-27 11:30:59 +02:00
Alberto Faria
a9262f551e block: Change blk_{pread,pwrite}() param order
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pread(blk, offset, buf, bytes, flags)
    + blk_pread(blk, offset, bytes, buf, flags)

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pwrite(blk, offset, buf, bytes, flags)
    + blk_pwrite(blk, offset, bytes, buf, flags)

It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.

Overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12 12:14:56 +02:00
Alberto Faria
3b35d4542c block: Add a 'flags' param to blk_pread()
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression blk, offset, buf, bytes; @@
    - blk_pread(blk, offset, buf, bytes)
    + blk_pread(blk, offset, buf, bytes, 0)

It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.

Overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12 12:14:56 +02:00
Alberto Faria
bf5b16fa40 block: Make blk_{pread,pwrite}() return 0 on success
They currently return the value of their 'bytes' parameter on success.

Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220705161527.1054072-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12 12:14:56 +02:00
Klaus Jensen
a78e9839ae hw/i2c: add asynchronous send
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().

The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
Paolo Bonzini
97ec4d21e0 machine: use QAPI struct for boot configuration
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12 12:29:43 +02:00
Marc-André Lureau
0f9668e0c1 Remove qemu-common.h include from most units
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 14:31:55 +02:00
Marc-André Lureau
8e3b0cbb72 Replace qemu_real_host_page variables with inlined functions
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.

This avoids the need for a constructor initialization too.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:38 +02:00
Tong Ho
2e9ce53200 xlnx-bbram: hw/nvram: Fix uninitialized Error *
This adds required initialization of Error * variable.

Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-04-05 09:28:04 +01:00
Patrick Venture
1cbab82e9d hw/nvram: at24 return 0xff if 1 byte address
The at24 eeproms are 2 byte devices that return 0xff when they are read
from with a partial (1-byte) address written.  This distinction was
found comparing model behavior to real hardware testing.

Tested: `i2ctransfer -f -y 45 w1@85 0 r1` returns 0xff instead of next
byte

Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211220212137.1244511-1-venture@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-14 14:48:35 +01:00
Emanuele Giuseppe Esposito
3b71719462 block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and test_sync_op_invalidate_cache
Following the bdrv_activate renaming, change also the name
of the respective callers.

bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate

No functional change intended.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:40 +01:00
Patrick Venture
21b86097f8 hw/nvram: use at24 macro
Use the macro for going from I2CSlave to EEPROMState.

Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220119214329.2557049-1-venture@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-02-21 18:21:54 +01:00
Philippe Mathieu-Daudé
33cda58f00 hw/nvram: Restrict fw_cfg QOM interface to sysemu and tools
fw_cfg QOM interface is required by system emulation and
qemu-storage-daemon. User-mode emulation doesn't need it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-3-f4bug@amsat.org>
2022-01-18 10:45:35 +01:00
Philippe Mathieu-Daudé
2280c27afc dma: Let st*_dma() take MemTxAttrs argument
Let devices specify transaction attributes when calling st*_dma().

Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-16-philmd@redhat.com>
2021-12-31 01:05:27 +01:00
Philippe Mathieu-Daudé
ba06fe8add dma: Let dma_memory_read/write() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_read() or dma_memory_write().

Patch created mechanically using spatch with this script:

  @@
  expression E1, E2, E3, E4;
  @@
  (
  - dma_memory_read(E1, E2, E3, E4)
  + dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
  |
  - dma_memory_write(E1, E2, E3, E4)
  + dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
  )

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2021-12-30 17:16:32 +01:00
Philippe Mathieu-Daudé
7a36e42d91 dma: Let dma_memory_set() take MemTxAttrs argument
Let devices specify transaction attributes when calling
dma_memory_set().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-3-philmd@redhat.com>
2021-12-30 17:16:32 +01:00
Tong Ho
e3f368e0b2 hw/nvram: Fix Memory Leak in Xilinx ZynqMP eFuse device
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-4-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-23 18:50:33 +02:00
Tong Ho
512a63b2b0 hw/nvram: Fix Memory Leak in Xilinx Versal eFuse device
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-3-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-23 18:50:33 +02:00
Tong Ho
c4e4d0d92b hw/nvram: Fix Memory Leak in Xilinx eFuse QOM
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-2-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-23 18:50:33 +02:00
Tong Ho
461a6a6f19 hw/nvram: Introduce Xilinx battery-backed ram
This device is present in Versal and ZynqMP product
families to store a 256-bit encryption key.

Co-authored-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Co-authored-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210917052400.1249094-5-tong.ho@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 13:42:10 +01:00
Tong Ho
67fa02f89f hw/nvram: Introduce Xilinx ZynqMP eFuse device
This implements the Xilinx ZynqMP eFuse, an one-time
field-programmable non-volatile storage device.  There is
only one such device in the Xilinx ZynqMP product family.

Co-authored-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Co-authored-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210917052400.1249094-4-tong.ho@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 13:42:10 +01:00
Tong Ho
9e4aa1fafe hw/nvram: Introduce Xilinx Versal eFuse device
This implements the Xilinx Versal eFuse, an one-time
field-programmable non-volatile storage device.  There is
only one such device in the Xilinx Versal product family.

This device has two separate mmio interfaces, a controller
and a flatten readback.

The controller provides interfaces for field-programming,
configuration, control, and status.

The flatten readback is a cache to provide a byte-accessible
read-only interface to efficiently read efuse array.

Co-authored-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Co-authored-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210917052400.1249094-3-tong.ho@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 13:42:10 +01:00
Tong Ho
68fbcc344e hw/nvram: Introduce Xilinx eFuse QOM
This introduces the QOM for Xilinx eFuse, an one-time
field-programmable storage bit array.

The actual mmio interface to the array varies by device
families and will be provided in different change-sets.

Co-authored-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Co-authored-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210917052400.1249094-2-tong.ho@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 13:42:09 +01:00
Paolo Bonzini
bf21fe9423 fw_cfg: add etc/msr_feature_control
The file already existed, but nobody had noticed the warning until now.
Add it at the bottom, since that is where unknown files go in legacy mode.

Fixes: 217f1b4a72 ("target-i386: Publish advised value of MSR_IA32_FEATURE_CONTROL via fw_cfg")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-13 13:56:26 +02:00
Stefano Garzarella
d0fb9657a3 docs: fix references to docs/devel/tracing.rst
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

  sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-06-02 06:51:09 +02:00
Thomas Huth
ee86213aa3 Do not include exec/address-spaces.h if it's not really necessary
Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
2068cabd3f Do not include cpu.h if it's not really necessary
Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
f6527eadeb hw: Do not include hw/sysbus.h if it is not necessary
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Philippe Mathieu-Daudé
538f049704 sysemu: Let VMChangeStateHandler take boolean 'running' argument
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09 23:13:57 +01:00
Prasad J Pandit
b5bf601f36 nvram: add nrf51_soc flash read method
Add nrf51_soc mmio read method to avoid NULL pointer dereference
issue.

Reported-by: Lei Sun <slei.casper@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200811114133.672647-6-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 15:15:32 +01:00
Hao Wu
828d651c58 hw/*: Use type casting for SysBusDevice in NPCM7XX
A device shouldn't access its parent object which is QOM internal.
Instead it should use type cast for this purporse. This patch fixes this
issue for all NPCM7XX Devices.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12 21:19:02 +00:00
Peter Maydell
41192db338 Machine queue, 2020-12-23
Cleanup:
 * qdev code cleanup (Eduardo Habkost)
 
 Bug fix:
 * hostmem: Free host_nodes list right after visited (Keqian Zhu)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl/jteYUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaZUHw//c40nRlYdGSV5j6w3ZCSlmZRFxZTU
 UiLK51Z3hI9Q9kyLcoIQitEYlQTIbgp0qlIJ6evDd/HvQvZ+P4P0Lzm1UGOZhD0h
 nJk5+bBkP/mzMh0P9oiN20DSLk6a3Wvdiu/bQR8gm/WdLvTM1Zjek1ns5tL06ZvA
 MziG6gIypgScu2FeNxD0zC8sDO16oVrzKq7mjZcQe6XYFRsJmYjZw84v+uu/Bdf7
 MBxolkA8vYwwBJNdVsAf7I0Gw3BeArgPUOwbWyt8/tuGIOZxYjdKIj55S7j2fuju
 524sg8Di+YzxmLZaNAGksEBMj9uY39nwdHGhNElMtWCM9oOPumlps9eyLtpTagfM
 wmiVrMGWVlXV6c4kZo8R2NSF8hcDr02S7eyrUpITrh09p4nT6fBGG2ufEYiCyNao
 o9ZqMf7NUO5J60zM5EOfdGxpaN2O0M5pXCCN48NtmqvO0wIAfTc9l/OkCrrfVbEO
 Q/X1jqbj6ZcilSIl9OeLAPi7Xjx26jMeeLPUQtoZnkqDvpk/Vz6Ka1RgGG86QA5z
 2W/KCAoVrg6dO4f9vY3x84rf0Ta5kJtp2LezPgG8d++4bMSf2jN00wYvAQuCyqqW
 zbm8f57YST3vm8XMHPlmtnlKfiLI4wbVUmrDYu3rNI+JgdvhdXseGoErt15ejAcL
 B5IH2SK4AwMpSsk=
 =bnjc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging

Machine queue, 2020-12-23

Cleanup:
* qdev code cleanup (Eduardo Habkost)

Bug fix:
* hostmem: Free host_nodes list right after visited (Keqian Zhu)

# gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost-gl/tags/machine-next-pull-request:
  bugfix: hostmem: Free host_nodes list right after visited
  qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen()
  qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr()
  qdev: Move qdev_prop_tpm declaration to tpm_prop.h
  qdev: Make qdev_class_add_property() more flexible
  qdev: Make PropertyInfo.create return ObjectProperty*
  qdev: Move dev->realized check to qdev_property_set()
  qdev: Wrap getters and setters in separate helpers
  qdev: Add name argument to PropertyInfo.create method
  qdev: Add name parameter to qdev_class_add_property()
  qdev: Avoid using prop->name unnecessarily
  qdev: Get just property name at error_set_from_qdev_prop_error()
  sparc: Use DEFINE_PROP for nwindows property
  qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros
  qdev: Move softmmu properties to qdev-properties-system.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-01 22:57:15 +00:00
Markus Armbruster
3ddba9a9e9 migration: Replace migration's JSON writer by the general one
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer.  The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert.  Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer".  It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().

The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-19 10:39:16 +01:00
Eduardo Habkost
ce35e2295e qdev: Move softmmu properties to qdev-properties-system.h
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-18 15:20:17 -05:00
Paolo Bonzini
2c65db5e58 vl: extract softmmu/datadir.c
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:18 -05:00
Jiahui Cen
0abd38885a fw_cfg: Refactor extra pci roots addition
Extract extra pci roots addition from pc machine, which could be used by
other machines.

In order to make uefi get the extra roots, it is necessary to write extra
roots into fw_cfg. And only if the uefi knows there are extra roots,
the config spaces of devices behind the root could be obtained.

Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20201119014841.7298-3-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08 13:48:57 -05:00
Philippe Mathieu-Daudé
8d0bceba24 hw/nvram: Always register FW_CFG_DATA_GENERATOR_INTERFACE
While the FW_CFG_DATA_GENERATOR_INTERFACE is only consumed
by a device only available using system-mode (fw_cfg), it is
implemented by a crypto component (tls-cipher-suites) which
is always available when crypto is used.

Commit 69699f3055 introduced the following error in the
qemu-storage-daemon binary:

  $ echo -e \
    '{"execute": "qmp_capabilities"}\r\n{"execute": "qom-list-types"}\r\n{"execute": "quit"}\r\n' \
    | storage-daemon/qemu-storage-daemon --chardev stdio,id=qmp0  --monitor qmp0
  {"QMP": {"version": {"qemu": {"micro": 50, "minor": 1, "major": 5}, "package": ""}, "capabilities": ["oob"]}}
  {"return": {}}
  missing interface 'fw_cfg-data-generator' for object 'tls-creds'
  Aborted (core dumped)

Since QOM dependencies are resolved at runtime, this issue
could not be triggered at linktime, and we don't have test
running the qemu-storage-daemon binary.

Fix by always registering the QOM interface.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 69699f3055 ("crypto/tls-cipher-suites: Produce fw_cfg consumable blob")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006111909.2302081-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-12 11:50:20 -04:00
Eduardo Habkost
8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Laszlo Ersek
4318432ccd hw/nvram/fw_cfg: fix FWCfgDataGeneratorClass::get_data() consumption
The documentation on g_byte_array_free()
<https://developer.gnome.org/glib/stable/glib-Byte-Arrays.html#g-byte-array-free>
says:

> Returns
>
> the element data if free_segment is FALSE, otherwise NULL. The element
> data should be freed using g_free().

Because we currently call g_byte_array_free() with free_segment=TRUE, we
end up passing data=NULL to fw_cfg_add_file().

On the plus side, fw_cfg_data_read() and fw_cfg_dma_transfer() both deal
with NULL data gracefully: QEMU does not crash when the guest reads such
an item, the guest just gets a properly sized, but zero-filled blob.

However, the bug breaks UEFI HTTPS boot, as the IANA_TLS_CIPHER array,
generated otherwise correctly by the "tls-cipher-suites" object, is in
effect replaced with a zero blob.

Fix the issue by passing free_segment=FALSE to g_byte_array_free():

- the caller (fw_cfg_add_from_generator()) temporarily assumes ownership
  of the generated byte array,

- then ownership of the byte array is transfered to fw_cfg, as
  fw_cfg_add_file() links (not copies) "data" into fw_cfg.

Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3203148917
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200916151510.22767-1-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-18 17:18:18 +02:00
Havard Skinnemoen
c752bb079b hw/nvram: NPCM7xx OTP device model
This supports reading and writing OTP fuses and keys. Only fuse reading
has been tested. Protection is not implemented.

Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-9-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Eduardo Habkost
8110fa1d94 Use DECLARE_*CHECKER* macros
Generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:27:09 -04:00
Eduardo Habkost
db1015e92e Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:26:43 -04:00
Peter Maydell
dd8014e4e9 ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
 accumulated things.  Highlights are:
 
  * Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
  * Add documentation on the (very confusing) pseries NUMA configuration
  * Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
  * Fix icount for a number of POWER registers
  * Many cleanups to error handling in XIVE code
  * Validate size of -prom-env data
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl87VpwACgkQbDjKyiDZ
 s5LjIxAAs8YAQe3uDRz1Wb9GftoMmEHdq7JQoO0FbXDQIVXzpTAXmFLSBtCWKl6p
 O1MEIy/o48b5ORXJqSDSA5LgxbHxYfHdIPEY5Tbn/TGvTvKyCukx9n11milUG8In
 JxRrOTQBnQAAHkLoyuZyrWKOauC0N1scNrnX9Geuid13GcmqHg1d2alXAUu8jEeC
 HSiVmtMqqyyqTx2xA4vfhaGuuwTthnKNfbGdg9ksVqBsCW+etn6ZKGImt8hBe3qO
 5iqbQZvFbkpzgbjkhDzUDM6tmUAFN55y/Y+y7I8Tz4/IX7d3WbdqpplwrXXVWkpq
 2gcBBjQ/9a1hPTBRVN9jn4CvHfhILBfeHIElUiLpSTQZQQALymTnnI2pLCgKoEFX
 LcchXbjiX+pZ2OJnAijpwBcknjgT2U/ZNyiqHJfSQ6jzlYx1YtUf4xGUsgloSiK8
 9QDK8o2k0Cm8Be+lPMBMmTctoi8bq+8SN5UUF710WQL235J58o9+z1vuGO2HVk3x
 flBtv/+B890wcCDpGU80DPs/LSzR0xTTbA5JsWft2fvO569mda0MoWkJH5w6jvSc
 ZLYqljCzFCVW+tKiGHzaBalJaMwn0+QMDTsxzP3yTt5LmmEeRXpBELgvrW64IobD
 xBeryH3nG4SwxFSJq+4ATfvUzjy/Eo58lTTl6c53Ji8/D3aFwsA=
 =L9Wi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging

ppc patch queue 2020-08-18

Here's my first pull request for qemu-5.2, which has quite a few
accumulated things.  Highlights are:

 * Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
 * Add documentation on the (very confusing) pseries NUMA configuration
 * Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
 * Fix icount for a number of POWER registers
 * Many cleanups to error handling in XIVE code
 * Validate size of -prom-env data

# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
  spapr/xive: Use xive_source_esb_len()
  nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
  spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
  ppc/xive: Simplify error handling in xive_tctx_realize()
  spapr/xive: Simplify error handling in kvmppc_xive_connect()
  ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
  spapr/xive: Fix error handling in kvmppc_xive_post_load()
  spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
  spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
  spapr/xive: Rework error handling in kvmppc_xive_get_queues()
  spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
  spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
  spapr/xive: Rework error handling of kvmppc_xive_mmap()
  spapr/xive: Rework error handling of kvmppc_xive_source_reset()
  spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
  spapr: Simplify error handling in spapr_phb_realize()
  spapr/xive: Convert KVM device fd checks to assert()
  ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
  ppc/xive: Rework setup of XiveSource::esb_mmio
  target/ppc: Integrate icount to purr, vtb, and tbu40
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 09:35:21 +01:00