Rename qemu_chr_event to qemu_chr_be_event, since it is only to be
called by backends and make it public so that it can be used by chardev
code which lives outside of qemu-char.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I guess we can also make sure we don't call local_ioc_getversion at
all.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is standard for other tcg targets and improves tci, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Intel's Open Source Software Developer Manual,
the dump counters address must be Dword aligned.
The new code enforces this alignment, so s->statsaddr may now
be used with stw_le_pci_dma() and stl_le_pci_dma().
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vdev->guest_features is not masking features that are not supported by
the guest. Fix this by introducing a common wrapper to be used by all
virtio bus implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Small requirements on "new" features have percolated to virtio-9p-local.c.
In particular, the utimensat wrapper actually only supports dirfd = AT_FDCWD
and flags = AT_SYMLINK_NOFOLLOW in the fallback code. Remove the arguments
so that virtio-9p-local.c will not use AT_* constants.
At the same time, fail local_ioc_getversion if the ioctl is not supported
by the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 66e3dd9282.
From Avi,
"Anthony, I think we should revert that commit and refactor cpuid for
1.1. The logic is spread over too many places which makes it hard to
reason about."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We should only claim that something is a cast if we did not encouter a
token before, that did set av_pending.
This fixes the operator * in the line below to be detected as binary (vs
unary).
kmalloc(sizeof(struct alphatrack_ocmd) * true_size, GFP_KERNEL);
Reported-by: Peter Chubb <nicta.com.au>
Signed-off-by: Florian Mickler <florian@mickler.org>
(cherry-picked from Linux kernel commit c023e4734c3e8801e0ecb5e81b831d42a374d861)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- ITLB/DTLB ways 5 and 6 have 4 and 8 entries respectively;
- ITLB/DTLB way 6 attr field is set to 3 on reset.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a special function to reset the host usb device. It tracks the time
needed by the USBDEVFS_RESET ioctl and prints a warning in case it needs
too long. Usually it should be finished in 200 - 300 miliseconds.
Warning threshold is one second.
Intention is to help troubleshooting by indicating that the usb device
stopped responding even to a reset request and is possibly broken.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vvfat caches more or less everything when in writable mode. For migration
to work, it would have to be invalidated. Block migration for now when
in writable mode (default is readonly).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vdi caches the block map. For migration to work, it would have to be
invalidated. Block migration for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mmio register name list only had the names for four port status
registers. We emulate a EHCI adapter with six ports though, the last
two ones are listed as "unknown" in traces. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes iPXE work with the rtl8139 emulation. The rtl8139
driver in iPXE issues a 16bit access on the ChipCmd register
(offset 0x37) to check the status of the rx buffer. The offset of the
ioport access was getting fixed up to 0x36 in qemu, causing the value
read in iPXE to be invalid.
This fixes an issue with iPXE reporting timeouts during TFTP transfers.
Reposting this here because it is trivial enough and the original post
on qemu-devel didn't attract much attention.
Also, the inw() which was causing the issue has been replaced with an
inb() in upstream iPXE:
https://git.ipxe.org/ipxe.git/commit/91dd64ad25baa27954a7518e73df4fca8a2d0c93
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When detaching devices from the usb hub we must wakeup too,
otherwise the host misses the detach event.
Commit 4a33a9ea06 does the
same for device attach.
Found by hkran@linux.vnet.ibm.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qdev doesn't call the ->exit callback on ->init failures, so we have to
take care ourself that we cleanup property on errors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use qdev_init() instead of qdev_init_nofail(), usb device initialization
can fail, most common case being port and device speed mismatch. Handle
failures correctly and pass up NULL pointers then.
Also fixup usb_create_simple() callers (only one was buggy) to properly
check for NULL pointers before referncing the usb_create_simple() return
value.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
get_str_sep() can fail, but net_slirp_hostfwd_remove() doesn't check.
Works, because it initializes buf[] to "", which get_str_sep() doesn't
touch when it fails. Coverity doesn't like it, and neither do I.
Change it to work exactly like slirp_hostfwd().
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
s->lock should be unlocked before leaving add_aio_request.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no reason why a scsi-generic device cannot boot if it has
the right type, and indeed it provides already a bootindex property.
So register those devices too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. Avoid that it is
included twice, and convert the colons to commas for consistency with
other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
USB mass storage devices are registered twice in the boot order.
To avoid having to keep the two paths in sync, pass the bootindex
property down to the scsi-disk device and let it register itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add check for the EFD_NONBLOCK and EFD_CLOEXEC flags to the
CONFIG_EVENTFD test.
This fixes the following build failure on Fedora 9:
CC event_notifier.o
event_notifier.c: In function `event_notifier_init':
event_notifier.c:21: error: `EFD_NONBLOCK' undeclared (first use in this function)
event_notifier.c:21: error: (Each undeclared identifier is reported only once
event_notifier.c:21: error: for each function it appears in.)
event_notifier.c:21: error: `EFD_CLOEXEC' undeclared (first use in this function)
make: *** [event_notifier.o] Error 1
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change the default on x86 Linux hosts to building PIE (position
independent executables); instead of restricting the option to
user-only targets, apply it to all targets.
In addition, set the relocation sections to read-only (relro) when
available; this reduces the attack surface by disallowing changes to
relocation tables at runtime.
While PIE reduces performance and relro increases load time, it
greatly improves security, with the potential to reduce a code
execution vulnerability to a self denial of service.
Non-x86 are not changed, as they require TCG changes; neither are
non-Linux, due to lack of test coverage.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ivshmem cannot work, and the command lspci cannot show ivshmem BAR2 in the guest.
As for pci_register_bar(), parameter MemoryRegion should be s->bar instead of s->ivshmem.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Hongyong Zang <zanghongyong@huawei.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check pending bit only if vector mask status changed.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
>From: Jan Kiszka <jan.kiszka@siemens.com>
Only accesses to the MSI-X table must trigger a call to
msix_handle_mask_update, otherwise the vector
value might be out of range.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only go over the table when function is masked.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
zlib.h is not a local include file, therefore it should be included
using <> instead of "".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
AT_REMOVEDIR is not defined on all systems. Pass the raw flags from the
9p protocol, which are always there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid a conflict on the definition of struct file_handle by
using a replacement name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with qed, you get:
(qemu) migrate tcp:localhost:1025
Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't reopen the actual file, but instead invoke the close and open routines.
We specifically ignore the backing file since it's contents are read-only and
therefore immutable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Image files have two types of data: immutable data that describes things like
image size, backing files, etc. and mutable data that includes offset and
reference count tables.
Today, image formats aggressively cache mutable data to improve performance. In
some cases, this happens before a guest even starts. When dealing with live
migration, since a file is open on two machines, the caching of meta data can
lead to data corruption.
This patch addresses this by introducing a mechanism to invalidate any cached
mutable data a block driver may have which is then used by the live migration
code.
NB, this still requires coherent shared storage. Addressing migration without
coherent shared storage (i.e. NFS) requires additional work.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with ivshmem, you get a proper QMP error:
(qemu) migrate tcp:localhost:1025
Migration is disabled when using feature 'peer mode' in device 'ivshmem'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
